Receiver Determination in multi mapping

Dear Folks,
I am facing a difficulty in implementing conditional receiver determination in my scenario. This is an IDOC to FILE scenario and requirement is IDOC needs to be split in multiple messages and specific messages to be delivered to different warehouses using FTP.
I have implemented multimapping 1:N and able to split the IDOC as per the requirement. But when I execute conditional receiver determination, all the splitted files are sent to all the warehouses.
The input is
<IDOC>
 <Segment>
 <warehouse_no>1</warehouse_no>
 </Segment>
 <Segment>
 <warehouse_no>2</warehouse_no>
 </Segment>
 <Segment>
 <warehouse_no>3</warehouse_no>
 </Segment>
</IDOC>
and output I want as
File No 1
<MT_WarehouseDetails>
 <warehouse_no>1</warehouse_no>
</MT_WarehouseDetails>
sent to warehouse 1
File No 2
<MT_WarehouseDetails>
 <warehouse_no>2</warehouse_no>
</MT_WarehouseDetails>
sent to warehouse 2
File No 3
<MT_WarehouseDetails>
 <warehouse_no>3</warehouse_no>
</MT_WarehouseDetails>
sent to warehouse 3
currently I am getting all the files in all the folders.
Your help will be appreciated.
- Shri

hi,
it is indeed a nice solution here is what I propose:
define a new communication component called XI_BUS, define a sender comm soap channel SND_SOAP_IDOCTYPE and a receiver soap comm channel RCV_SOAP_IDoctype that points to the sender one. (you will need a service username and password in the pi system). check this link on how to configure your RCV comm channel to point back to your PI system [http://help.sap.com/saphelp_nw04/helpdata/en/2b/d5653fd1d3b81ae10000000a114084/frameset.htm]
source system -> XI (in this flow you do the multi mapping)-> XI_BUS (using RCV_SOAP_IDOCTYPE) (basically re-routing it back to XI)
XI_BUS(using SND_SOAP_IDOCTYPE) -> XI ( here you use your extended receiver determination) -> RCV_1
-> RCV_2
-> RCV_n
I hope this helps

Similar Messages

Multi Mapping using condition & Dynamic Receiver determination – Used XSLT Mapping

Dear Experts,
 I am struggling to identify an error on the Technical Routing. Firstly according to my scenario, I receive an XML file with multiple PO's and I have to split the file to 2 different target messages. and also according to the source payload I have to send the file to 2 different receivers. first receiver is ABAP Proxy to the back end system and the 2nd one is to a file location. I have used XSLT to split the message into 2 target message type and I have used a XSLT mapping for receiver determination. Does any one have any idea of what I am doing wrong.
Note: some time I will only be able to fill in on target message.
I have attached my XSLT message split mapping with this post, please let me know if you have further question.
Your help is more appreciated.
Advance Thanks,
Pradeep
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:sap="http://www.sap.com/sapxsl" version="1.0">
<xsl:variable name="vFlag"/>
<xsl:variable name="vPONUM" select="POTRACKING/Lines[1]/PONumber"/>
<xsl:template match="/">
 <ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
 <ns0:Message1>
 <ns1:MT_Tracking xmlns:ns1="http://www.findel-education.co.uk/axapta">
 <xsl:for-each select="POTRACKING/Lines">
 <sap:call-external class="ZCL_VNAP_OBJECTS" method="CHECK_PO_EXIST">
 <sap:callvalue param="IP_EBELN" select="string(PONumber)"/>
 <sap:callvariable name="vFlag" param="EP_BOLEAN" type="string"/>
 </sap:call-external>
 <xsl:if test="$vFlag = 0">
 <Lines>
 <DDate>
 <xsl:value-of select="DespatchDate"/>
 </DDate>
 <PONumber>
 <xsl:value-of select="PONumber"/>
 </PONumber>
 <POLine>
 <xsl:value-of select="POLine"/>
 </POLine>
 <QTY>
 <xsl:value-of select="Quantity"/>
 </QTY>
 <VendorMaterial>
 <xsl:value-of select="VendorMaterialNumber"/>
 </VendorMaterial>
 <AccountRef>
 <xsl:value-of select="AccountReference"/>
 </AccountRef>
 <ConsignNumber>
 <xsl:value-of select="ConsignmentNumber"/>
 </ConsignNumber>
 <CarrierURL>
 <xsl:value-of select="CarrierURL"/>
 </CarrierURL>
 <ConsignURL>
 <xsl:value-of select="ConsignmentURL"/>
 </ConsignURL>
 </Lines>
 </xsl:if>
 </xsl:for-each>
 </ns1:MT_Tracking>
 </ns0:Message1>
 <ns0:Message2>
 <ns2:MT_Tracking xmlns:ns2="http://www.findel-education.co.uk/ecc/ax/po/ftp">
 <xsl:for-each select="POTRACKING/Lines">
 <sap:call-external class="ZCL_VNAP_OBJECTS" method="CHECK_PO_EXIST">
 <sap:callvalue param="IP_EBELN" select="string(PONumber)"/>
 <sap:callvariable name="vFlag" param="EP_BOLEAN" type="string"/>
 </sap:call-external>
 <xsl:if test="$vFlag = 1">
 <Lines>
 <DDate>
 <xsl:value-of select="DespatchDate"/>
 </DDate>
 <PONumber>
 <xsl:value-of select="PONumber"/>
 </PONumber>
 <POLine>
 <xsl:value-of select="POLine"/>
 </POLine>
 <QTY>
 <xsl:value-of select="Quantity"/>
 </QTY>
 <VendorMaterial>
 <xsl:value-of select="VendorMaterialNumber"/>
 </VendorMaterial>
 <AccountRef>
 <xsl:value-of select="AccountReference"/>
 </AccountRef>
 <ConsignNumber>
 <xsl:value-of select="ConsignmentNumber"/>
 </ConsignNumber>
 <CarrierURL>
 <xsl:value-of select="CarrierURL"/>
 </CarrierURL>
 <ConsignURL>
 <xsl:value-of select="ConsignmentURL"/>
 </ConsignURL>
 </Lines>
 </xsl:if>
 </xsl:for-each>
 </ns2:MT_Tracking>
 </ns0:Message2>
 </ns0:Messages>
</xsl:template>
</xsl:stylesheet>

Hi Hareesh,
Please find my determination in the XSLT below, I am using enhanced receiver determination.
<xsl:transform xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:sap="http://www.sap.com/sapxsl" xmlns:p1="http://sap.com/xi/XI/System" xmlns:ns="urn:sap-com:document:sap:idoc:messages" version="1.0">
<xsl:variable name="vFlag"/>
<xsl:variable name="vAX" select="0"/>
<xsl:variable name="vSAP" select="0"/>
<xsl:variable name="vBoth" select="0"/>

<xsl:template match="/">
 <xsl:for-each select="POTRACKING/Lines">
 <sap:call-external class="ZCL_VNAP_OBJECTS" method="CHECK_PO_EXIST">
 <sap:callvalue param="IP_EBELN" select="string(PONumber)"/>
 <sap:callvariable name="vFlag" param="EP_BOLEAN" type="string"/>
 </sap:call-external>
 <xsl:choose>
 <xsl:when test="$vFlag = 0">
 
 <xsl:variable name="vAX" select="$vAX + 1"/>
 </xsl:when>
 <xsl:when test="$vFlag = 1">
 
 <xsl:variable name="vSAP" select="$vSAP + 1"/>
 </xsl:when>
 </xsl:choose>
 </xsl:for-each>
 <xsl:if test="$vSAP > 0">
 <xsl:if test="$vAX > 0">
 <xsl:variable name="vBoth" select="$vBoth + 1"/>
 <xsl:variable name="vSAP" select="0"/>
 <xsl:variable name="vAX" select="0"/>
 </xsl:if>
 </xsl:if>
 <xsl:if test="$vBoth > 0">
 <p1:Receivers>
 <Receiver>
 <Service>
 <xsl:text>BS_AXAPTA_TST</xsl:text>
 </Service>
 </Receiver>
 <Receiver>
 <Service>
 <xsl:text>BS_ECQCLNT300</xsl:text>
 </Service>
 </Receiver>
 </p1:Receivers>
 </xsl:if>
 <xsl:if test="$vAX > 0">
 <p1:Receivers>
 <Receiver>
 <Service>
 <xsl:text>BS_AXAPTA_TST</xsl:text>
 </Service>
 </Receiver>
 </p1:Receivers>
 </xsl:if>
 <xsl:if test="$vSAP > 0">
 <p1:Receivers>
 <Receiver>
 <Service>
 <xsl:text>BS_ECQCLNT300</xsl:text>
 </Service>
 </Receiver>
 </p1:Receivers>
 </xsl:if>
</xsl:template>
</xsl:transform>

Access Receiver Determination value in mapping

Hi Everyone,
We have a need to access the receiver determination value from our mapping. Is this information stored in a global variable that we can access from a UDF in our mapping?
Cheers.

Joe,
Could you plz brief your reqmt?
raj.

Enhanced receiver determination and value mapping

I want to use enhanced receiver determination functionality in my scenario.
I couldn't see any message interface or data type under http://sap.com/xi/XI/System.
we are on Sp08 nw04s and SAP BASIS 7.0 software component in IR.
I don't want to hard code my business service name in mapping.How can I achieve this?
Thanks,
Rekha.
Message was edited by:
Rekha Lather

Hi,
> couldn't see any message interface or data type under http://sap.com/xi/XI/System.
we are on Sp08 nw04s and SAP BASIS 7.0 software component in IR.
After upgradation to SP08 on NW04s , did you reimport the SAP BASIS Component into your IR? Ask your basis admin team to reimport the SAP basis Component into the IR.
>I don't want to hard code my business service name in mapping.How can I achieve this?
Similar discussion available in the comments section of this blog,
/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16
Would suggest you use value Mapping.
Regards
Bhavesh

Receiver determination for ALEAUD??

Hi,
I have configured my ALEAUD for a (B2B partner) R3 -> PI (B2b) - > PI (local) - > R3 (local) scenario... I have requested the partner PI system to map their systems to my business systems in their Receiver determination step - header mapping.... But the reverse step of sending back AleAUD is falling in our partners system because of the changed business system names...
I am not able map the ALEAUD back to the original Business sytems used by the partners....Although I have created a receiver aggrement the std Aleaud does not pick it up.
I would like to avoid using the ALEAUD as a seperate message approach.
Regards,
Arvind R

Hi Arvind,
Refer this links. Hope it will help you.
Custom processing for ALEAUD01 messages ??
Re: XML Incoming Invoices - Send response to Vendor for Failed Messages in XI
Thanks.

Multi Mapping with out BPM and Receiver Determination Condition

Hi Masters,
My Requirement Was:
Proxy will send the data to XI system, Based Customer group number[1000,2000,3000,4000], I need to split the message into 4 messages, and sent to 4 Different location, based on Customer Group condition.
For message split, I fallowed below weblog.
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Problem is file split correctly, but data goes to all customer groups..
EX
If they send the customer group 1000, I need to send the customer group 1000 file to BS1[Business Server1],
If they send the customer group 2000, I need to send the customer group 2000 file to BS2[Business Server1],
Please guide me,
Thanks,
ANU-

Hi,
Develope it like follow.
Source Structure- Same for everything.
Create 4 different structures for all targets, create 4 different msg types, 4 inbound message interface ( i think you are creating single Message type now, that is the mistake)
In message maaping, add 4 target message types in same MM.. i hope i am clear.. ( same like in blog /people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible he has created 2 message types USER_1 and Employee)
keep occurence of all of them 0 to unbunded (not necessary)
Now create mapping for each message type (same like USER_1 and Employee, imagine them like different message types virtually).
Map message type with the source field and mention the condition which you want test using graphical functions. i will say if x e equla to 1 creatif --> target.
I hope i m clear till now...
thanks.

SP14 Multi-mapping - error in receiver idoc adapter

Hi,
I have a scenario where a business service should send some XML to SAP CRM. I get the file via a sender JMS adapter and try to post it to CRM via a receiver IDOC adapter.
I have created a multimapping (1:N - 1 XML file to many Idocs) as should in the repository.
In the configuration under Interface Determination, I have chosen 'RB_SPLIT' and selected the interface multimapping.
It should be pointed out, that when testing both interface and message mapping i get no error. All idocs seem to be created as they should.
When testing the setup 'real life' the message fails. The error message in the monitor says:
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_WRONG_INTF</SAP:Code>
<SAP:P1>InterfaceCollection</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to interpret IDoc interface InterfaceCollection</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Notice that the above error is when trying to send only 1 record, which in turn then should result in only 1 idoc.
If trying to send multiple XML records, i get the following error:
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">MMF_ENGINETYPE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>A system error occurred in the outbound binding</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
In the monitor in the payload of 'Request message mapping' I see as many Maindocument, Submaindocument pairs as should be Idocs.
Now i really don't know how to interpret the error messages in both cases, so I'm a little lost here...
It should be pointed out that the idoc being used everywhere in this scenario, has not been modified - from all places it is being used (and only exists) in the 'Imported objects | Idocs' place.
Also the Idoc is also being used as Inbound interface - so no mistakes here either.
I really hope someone can help me here, as I'm otherwise pretty stuck in this case.
Best regards,
Daniel

Hi Daniel,
I have exactly the same type of scenario (under SPS14 and now also SPS15), sending an XML message over JMS to XI and trying a multi-mapping to many IDocs (actually a list of orders in XML is mapped to n ORDERS Idocs).
I also face problems doing so, when I use the IDoc Adapter as outbound in the Receiver Agreement. I receive the following error:
CO_TXT_MMF_ENGINETYPE
Messages in multi message format can be sent to one adapter engine only
However, I tested the same scenario by just changing the Receiver Agreement to a File Communication Channel and - surprise, surprise - it works. One file per IDoc is created.
Of course, this is not what we want to accomplish, but when I checked this piece of documentation (sorry another link
http://help.sap.com/saphelp_nw04/helpdata/en/42/ed364cf8593eebe10000000a1553f7/content.htm
the IDoc adapter is not listed in the list of Adapters that are supported. Does that mean, that this feature is not supported for generating IDocs? Maybe that's a question for a SAP OSS Message?
I hope that helped you a little further - if you find out more I'd be happy to learn about it.
regards,
Peter

Multi Mapping to multi receiver

Hello all,
I having a req that incoming IDoc hac multiple files say,
<IDoc Name>
 <IDoc>
 <Field1>
 <Field2>
 <IDoc>
 <Field1>
 <Field2>
 <IDoc>
 <Field1>
 <Field2>
Based on field 2 i need to send multiple receiver. For ex if my field2 is 10 i need to send receiver 1, if my field2 is 20 i need to send receiver 2, if my field2 is 30 i need to send receiver 3 and so on..
I searched google and unable to get solution. Please help out of this. This is in high priority.
Regards
Amar

Hi Amarnath,
You can achieve your requirement in two ways.
1)Multi mapping
2)Enhanced receiver determination , (map b/w sender structure,receiver1 structure),(map b/w sender structure,receiver2 structure),...
I personally prefer 2nd option because it looks very clean design and efficient than multi mapping.
2)In enhanced receiver determination use the below udf.
field2-->mapwithdefault-->remove context-->sort-->splitbyvalue (valuechange)-->collapsecontest-->udf-->receiver1,service1,receiver2,service2..............
for(int i=0;i<n;i++){
 if(input[i].equals("10")){
 receiver1.addValue("");
 service1.addvalue("BSNAME");
else if(input[i].equals("20")){
 receiver2.addValue("");
 service2.addvalue("BSNAME");
In individual mappings just send those respective records
field2-->mapwithdefault-->remove context-->equals("10")-->if-->mt_receiver1
field2-->mapwithdefault-->remove context-->equals("20")-->if-->mt_receiver2
NOTE:We need to go for either of the above approach because we need to check record in sender structure .
Regards
Venkat

Alert to Error in Receiver determination mapping

Hi everyboy.
Im using a mapping to decide the receiver determination (ReceiverDetermination - http://sap.com/xi/XI/System).
I can´t configure an alert when the mapping fails.
How could I do that????
Thanks a lot

Hi Christian,
As per my understanding you are using extended receiver determination by creating an interface mapping in between your outbound interface and standard receiver interface of SAP BASIS.Do you mean to say that if source data doesnot fulfill the condition to determine any receiver.If so, then I believe in SXMB_MONI we can find the error as unable to determine receiver.Since it belongs to mapping so it will be executed in Integration engine.
create an alert category in ALRTCATDEF
Define Alert Rule in RWB -> Alert Configuration
Select the our own Alert Category
Click to Add Rule and activate the corresponding rule
Regards,
Nutan

INTERFACE MAPPING wa not Displaying in Receiver Determination (Extended)

Hi friends,
I'm doing Enhanced Receiver determination.. but in this if i select Extended radio button in the receiver determination .. I'm not gettting any search help for selecting my Interface mappings..
what misteqe i did.. for getting those interface mappings in Receiver Determination does we need to do..any special things .
i followed the bellow blog.. but like that i'm not getting... and how many interface mappings do we need to create for this..
/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16
plz suggest me..
thanks
BABU

how many interface mappings do we need to create for this..
One
Make sure u have activated ur Interface Mapping. Also recheck the sender interface and the interface u r selecting in Interface Determination step.
Regards,
Prateek

Multi Mapping for JDBC Receiver JDBC Adapter

Hi All,
I'm trying an IDoc to JDBC (canonical XML) scenario using multi mapping (single IDoc as source and two different JDBC messages in receiver end). But, this is failing in RWB with some parser error. So, am not sure whether multi mapping is allowed for JDBC Canonical XML format. Please clarify.
Thanks,
Hussain.

Hi ,
JDBC Adapter supports multi mapping,so you can implement the same,but what do you mean by Canonical XML format??
Regards,
Raj

Interface mapping is not visible in receiver determination

Hi,
I could not see interface mapping in my receiver determination in ID.
I can see the message interface and receiver agreement in receiver determination
my scenario is idoc to soap (SAP R3 to webservice)
Thanks
Ruban

hi,
could you plz check as Sheshagiri and Phani have said.
Also wanted to know,are u using the configuration wizard for creating ur business scenario and not finding ur interface mapping?
if so is the case then try creating manually ur reciever determination and add ur interface mapping(if u have already done as said by phani and seshagiri) by inserting it.
let us know how it went.
thanks,
ahmed

Add Interface mapping to Receiver Determination is not possible

Hello,
I create some scenarios from R\3 to BW and R\3 to File.
When I want to add Interface mapping to Receiver Determination is not possible.
Not to choose from list and not with copy and paste.
Any ideas?
Regards
Elad

Hi Elad,
Just check whether ur interface mapping that u defined in IR is activated properly or not.It will be present in the hit list as soon as u click the help button of the interface mapping of the interface determination in the ID.
Regards,
Prasanthi.

Multi Mapping - Receiver IDOC & Mail with BPM

Hi,
Is it possible to use BPM with Multi Mapping for IDOC & Mail receivers sent parallely..
Appreciate your help ..
Thanks,
vasanth.

Hi Michal,
Thanks Michal,
We are using PI 7.1, Our Scope to do File to IDOC & Mail scenario in between we have to do RFC Lookups..
Could you pls guide me thru the steps fo BPM,
1 SA -> OB to AA
2 ID -> OB to AA & AA to Recv
3.RD -> OB to AA & AA to Recv
4.RA -> AA to IB & AA to IB
Correct me if i'm wrong..
Clarification : Is there is any way out to implement this scenario with out BPM.
We already implemented this scenario with 2 MM & 2 OM, Scenario works fine...but we have to use 1 Mapping..
Appreciate your help in advance..
Thanks,
vasanth.

Multi-Mapping - JDBC receiver - Multiple stored procedure - How to sequence?

Hi Folks,
We have 7.1 .Done multi-mapping , single source mapped to 5 different stored procedures.
The challenge we are facing here is , these stored procedure is not working sequentially .
i.,e for e.g., 2nd Stored Procedure should start only when first Stores procedure completely finished its turn.
But third procedure getting completed before1 st stored procedure completes .
Highly appreciate if any views on this ? How to sequence and make sure second will start only when first SP complete ?
-- Shiva

Hi ,
Thanks for your reply. all stored procedures are asynchronous one.
If we go for ccBPM , do we need to put wait step ?
- Here we dont know how much time each procedure takes to complete. Requirement is another procedure has to start only when the previous one completes.
--Shiva

Receiver Determination in multi mapping

Similar Messages

Maybe you are looking for