Receiver File Adapter Problem

Hello,
I m message is in "To be Delivered" status
In the detials i could see following error :
Admin action: Redelivering the message failed, due to: com.sap.aii.af.ra.ms.api.DuplicateMessageException: Message ID 995b0348-a504-7441-e100-00000a1974ee(INBOUND) already exists in queue: File_http://sap.com/xi/XI/SystemRecv.
In SMQ1 & SMQ2 nothing is stucked.
How can i clear AE queue??
Thanks,
Maheshwari

Hi,
Go though the below link
I also faced the same problem. In my case some other sceanario CC are in error status and all messages in those CC are structed in message system i.e. in AE . So i rectified all error CCand i resend messages.
Difference between Business System and Business Service
If that is not the case then restart ur J2EE engine
Thanks,
Venkatesh

Similar Messages

Receiver file adapter problem in file to file scenario

My situation is: I created the scanrios with file adapters, using
FTP, the sender adapter is picking up the file, but the output file
is not been created in the path mentioned, both the adapter status
looks green, I have no error message in the sxmb_moni for this
scenario. my adapter status looks as below:
kris_scenario1_filetofile_receiverCC Receiver Adapter v2112 for
Party '', Service 'krishna_bussystem01':
Configured at 2006-05-28 20:14:19 EDT
No message processing until now
kris_scenario1_filetofile_senderCC Sender Adapter v2126 for
Party '', Service 'krishna_bussystem01':
Configured at 2006-05-28 20:11:35 EDT
History:
- 2006-05-28 20:16:25 EDT: Polling interval started. Length: 10.000 s
- 2006-05-28 20:16:25 EDT: Processing finished successfully
- 2006-05-28 20:16:25 EDT: Processing started
- 2006-05-28 20:16:15 EDT: Polling interval started. Length: 10.000 s
- 2006-05-28 20:16:15 EDT: Processing finished successfully

Moorthy,
as you suggested I checked in MDT, FYI I am doing without content coversion. from the below message I dont see any problem, so what could be a problem
The sender has 'delivered' status but the receiver has 'to be delivered' status
Receiver audit log:
2006-05-29 00:07:56 Success The message was successfully received by the messaging system. Profile: XI URL:
2006-05-29 00:07:56 Success Using connection AFW. Trying to put the message into the receive queue.
2006-05-29 00:07:56 Success Message successfully put into the queue.
Sender audit log:
2006-05-29 00:07:54 Success Send binary file "filetofile.xml" from FTP server "xx.xx.xxx.xxx:/yyyyy", size 221 bytes with QoS EO
2006-05-29 00:07:54 Success Application attempting to send an XI message asynchronously using connection AFW.
2006-05-29 00:07:54 Success Trying to put the message into the send queue.
2006-05-29 00:07:54 Success Message successfully put into the queue.
2006-05-29 00:07:54 Success The application sent the message asynchronously using connection AFW. Returning to application.
2006-05-29 00:07:54 Success The message was successfully retrieved from the send queue.
2006-05-29 00:07:54 Success File "filetofile.xml" deleted after processing
2006-05-29 00:07:54 Success The message status set to DLNG.
2006-05-29 00:07:55 Success The message was successfully transmitted to endpoint http://host:port/sap/xi/engine?type=entry using connection AFW.
2006-05-29 00:07:55 Success The message status set to DLVD.

Receiver File Adapter: Problem with NewLine Content Conversion Parameter

Hello Everybody
On our SAP-XI (SAP NetWeaver 2004s, sp14) I have the scenario to send a price catalogue (IDoc PRICECATALOGUE.PRICECATALOGUE02) from SAP R/3 as csv PRICAT file to a file share.
In the receiver communication channel I have defined
Message Protocol = File Content Conversion
using the following RecordSet:
RecordSet = HeaderRow,MainBody
One header row is followed by one or more main body rows. The csv PRICAT message format demands that there is an empty row (i.e. one carriage return) between header and main body and another carriage return after the last main body row:
<Header Row>
carriage return
<MainBody 1>
<MainBody 2>
carriage return
As content conversion parameters I tried to use NewLine ('nl') to create the carriage returns in the file:
HeaderRow.fieldSeparator = ,
HeaderRow.endSeparator = 'nl' " new line
MainBody.fieldSeparator = ,
MainBody.endSeparator = 'nl'
Using the settings I have been able to created the carriage return at the end of the file but not the one between header and main body.
As workaround I have used the following approach:
" Add the following XSLT mapping between header and body:
 <SeparatorLine>
 <value>
 <xsl:value-of select=" '' "/>
 </value>
 </SeparatorLine>
RecordSet and parameters have been changed accordingly:
RecordSet = HeaderRow,SeparatorLine,MainBody
HeaderRow.fieldSeparator = ,
HeaderRow.endSeparator = 'nl'
SeparatorLine.fieldFixedLength = 0,0 " sic!
MainBody.fieldSeparator = ,
MainBody.endSeparator = 'nl'
Has anybody an idea why I failed to receive the first carriage return and has somebody a more elegant solution?
Kind Regards
 Uwe

Hi,
Thanks for reply. I have already used 'nl'.
When i open into the notepad it is showing [] boxes rather then new line.
e.g. 1 [] 2 []
but when we open into wordpad it opens properly.
Customer wants when he opens in notepad it should show line by line.
e.g.
1
2
How should i convince to customer ?

Error dynamic File Name in Receiver File Adapter

Hi all,
Dynamic file name for Receiver file Adapter Problem
my multi mapping look like this in design mode
messages
 message1
 SD01_E
 FileName
 row
 message2
 SD02_E
 FileName
 row
by processing the xml look like this:
<ns2:SD01_E xmlns:ns2="urn:lsv.de/SAP/XXX">
<FileName>L40SA939.xiConstant</FileName>
- <row>
or
<ns2:SD02_E xmlns:ns2="urn:lsv.de/SAP/XXX">
<FileName>L40SA939.xiConstant</FileName>
- <row>
in file receivere adapter i have try this but it dos not work
payload:SD01_E,1,FileName,1
Error:com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 0(:main:, row:1, col:0)
is there any way to have access to Filename in different root elements??
regards
Ralf

Hi Ralf,
i think, you need for each XML msg (each different root element) a new adapter -> a new IF determination, new rec agreement and a new channel.
Regards,
Udo

Problem with file content conversion in receiver file adapter

Hi All
I have a problem with file content conversion in receiver file adapter.
This is my recordset structure: Header_Record,1,Claim_Record,*,Check_Rec,1
These are the content conversion parameters:
Header_Record.fieldSeparator = ,
Header_Record.endSeparator = 'nl'
Claim_Record.fieldSeparator = ,
Claim_Record.endSeparator = 'nl'
Check_Rec.fieldSeparator = ,
Check_Rec.endSeparator = 'nl'
In SXMB_MONI, i can see that the data is correctly extracted from proxy, and correctly mapped to receiver message, and i see a checkered flag (success).
But, Adapter status is RED with the following error message:
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter '1.fieldFixedLengths' or '1.fieldSeparator' is missing
In communication channel monitoring, i get the following error message:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Channel has not been correctly initialized and cannot process messages
What is going wrong here? Can anyone please tell me?
Thanks
Chandra

Posted in Incorrect forum.
Posted again in Process Integration forum

Problem with fixedlenthgs in receiver file adapter

HI,
I am doing XML to flat file scenario and using mutli mapping concept without BPM.
in the receiver file adapter I am using FCC with fixedlengths,then it generated just 3 output files out of nearly 100 source files.the errored one are succcessful in the SXMB_MONI and failing in RWB-->Message moni with waiting status and MDT says that XI_J2EE_ADAPTER_FILE ,Error Code PROCESSING_ERROR .
i tried in SDN and then found something like enable the disablesecurity check box in variable substitution parameters ,then I got 4 files out.
these are my FCC params for all structures:
struc1.fieldFixedLengths
struc1.fixedLengthTooShortHandling
struc1.endSeparator
and I tried with fieldSeparator then it gives successfully all output files.
so,where is the problem?I didnt understand?
any suggestion.
thank you,
regards,
Babu Sri

Bhavesh,
I felt the same way,but assumed that ,in that way fixedlenghths wont work.
in my target structure most of the fields have 0-1 occurences ,and even in the source structure too.so,I think it might be the reason.Then I have to make all my about 60fields 1-1 madatory and using mapWithDefaultValue function, as my sources are optional.
you think it will work just using the "mapWithDefaultValue" function without changing my occurences to 1-1 in the target structure(mandatory)?infact I can try but ,cos of pain for changing like 60 fields....:) and even dont know which fields are causing the problem,so that we can apply "mapWithDefaultValue" function only on those fields.
thank you,
Babu Sri

Receiver File Adapter Content Conversion Problem.

Hi All,
I am getting in receiver file adapter due to content conversion setting. Problem is that all the fields coming in file adapter are optional. In content conversion , i have specified fieldfixedlengths. So whenever any optional field is not present , it fails . How should we handle it? is there any option to declare fields as optional, I know that is the there for sender adapter. But no. of fields is also very large, so putting each and every field as optional is very time consuming.
What should i do?
Ranjeet Singh.

Hi Daniele,
Instead of using the standard funciton , i created a UDF for handling this situation.
My logic is UDF is like
 //write your code here
int Size = Integer.parseInt(Truncate_Size);
String Return_Value = "";
 if (!("".equals(Input)) )
 if (Input.length() > Size )
 Return_Value = Input.substring(0,Size);
 else
 Return_Value = Input.substring(0, Input.length());
 else
 for(int i = 0; i< Size ; i++)
 Return_Value = Return_Value + " " ;
return Return_Value;
SO in this case also , it should be able to handle empy source element. But it is not working.

Problem: The same filename from a sender to a receiver file adapter - SP14

Blog : /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
My Problem:
The thing works for me and i am able to get my input files name as my output file name. But one thing i noticed is that in my target message, the field where i have mapped the code it always returns the value "null" but finally when the file is created i get the required result.
My input file name is input.txt and i get the same name in my output file too.
In sxmb_moni if i check DynamicConfiguration link i see the following
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <sap:DynamicConfiguration xmlns:sap="http://sap.com/xi/XI/Message/30">
<sap:Record namespace="http://sap.com/xi/XI/System/File" name="SourceFTPHost">10.25.116.98:21</sap:Record>
<sap:Record namespace="http://sap.com/xi/XI/System/File" name="Directory">/input/test</sap:Record>
<sap:Record namespace="http://sap.com/xi/XI/System/File" name="SourceFileTimestamp">20060228T112200Z</sap:Record>
<sap:Record namespace="http://sap.com/xi/XI/System/File" name="FileType">bin</sap:Record>
<sap:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">input.txt</sap:Record>
<sap:Record namespace="http://sap.com/xi/XI/System/File" name="SourceFileSize">770</sap:Record>
</sap:DynamicConfiguration>
But when i check my mapped field i see
<field3>BodyC</field3>
<keyfield>02</keyfield>
<field5>BodyE</field5>
<field6>BodyF</field6>
</Body>
- <Trailer>
<keyfield>03</keyfield>
<field2>null</field2> -> Null value instead of input.txt
</Trailer>
</ns0:MT_Putfile>
The code i have used to map the field2 of the trailer is the following ....
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileType");
String valueOld = conf.get(key);
return valueOld; 
Any clues ?

Gosh this is spooky
Anyway i tried with that line of code but it throws me an error during activation ...
Activation of the change list canceled Check result for Message Mapping mm_IS | http://t-systems.com/Shabarish: Starting compilation Source code has syntax error: /usr/sap/TXT/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map387c7300a9ac11da9d280011256afae8/source/com/sap/xi/tf/_mm_IS_.java:104: cannot resolve symbol symbol : method getTransformationParameters () location: interface com.sap.aii.mappingtool.tf3.rt.GlobalContainer DynamicConfiguration conf = (DynamicConfiguration) container.getGlobalContainer().getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION); ^ 1 error
The code is :
DynamicConfiguration conf = (DynamicConfiguration) container.getGlobalContainer().getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
//DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
//String valueOld = conf.get(key);
String valueOld = conf.toString();
return valueOld;
Thanx Renjith so far .. but i hope this gets resolved (else i will loose my sleep thinkin abt the situation)

Problem in Overwriting the file in Receiver File adapter

Hi all,
I configured my scenario Proxy to File. Every day the back ground job runs in SAP and send all Employee Details to XI, XI then write it into File in XI server, in Receiver File adapter i enable overwrite existing file.
But some times its over writing the file some times came up with error like "Access Denied".
Can any one tell me what could be the problem.
Kind Regards,
Kiran

> But some times its over writing the file some times
> came up with error like "Access Denied".
This can be a Authorization problem...may be at that time you are unable to write any file in that directory..or some other application is using it and it make a lock at that time.
Thanks
Farooq.

Problem with File Content Conversion (Receiver FIle Adapter)

Hi Experts,
I have following structure in receiver side:
MT_Test
 F1
 F2
 F3
 F4
Now I want a CSV file in target side in below format:
F1,F2,F3,F4
I have provided below config in receiver file adapter under content conversion tab:
Recordset Structure : MT_Test
MT_Test.fieldSeperator= ,
MT_Test.endSeperator= 'nl'
But this is generating blank CSV files in target directory..What might be the reason.. I have checked the msg in adapter engine, the XML file is correct and contains valid values for the fields..Its something like below:
<?xml version="1.0" encoding="UTF-8" ?>
<MT_Test>
 <F1>Hai</F1>
 <F2>Hello</F2>
 <F3>Bye</F3>
 <F4>Hi</F4>
</MT_Test>
I should get CSV file as
Hai,Hello,Bye,Hi
But I am getting a blank file with above said config parameters in content conversion tab.
What might be the reason for getting blank CSV files in target side???
Thanks,
Adi

Hi Adi,
>>My target structure in below format:
<?xml version="1.0" encoding="UTF-8" ?>
- <MT_Test>
<F1>Hai</F1>
<F2>Hello</F2>
<F3>Bye</F3>
<F4>Hi</F4>
</MT_Test>
So, try to edit Data type and include hierarchy level above <F1>.
Finally your Target Structure will resembles like this.
<?xml version="1.0" encoding="UTF-8" ?>
- <MT_Test>
<Structure>
<F1>Hai</F1>
<F2>Hello</F2>
<F3>Bye</F3>
<F4>Hi</F4>
</Structure>
</MT_Test>
FCC Parameters will be like this.
Structure.fieldSeparator = ,
Structure.endSeparator = 'nl'
Hope you were clear.
Thanks,
Siva.

0 byte txt file using receiver File Adapter

HI,
My scenario is Flat File to Fixed Length File.
Mapping : Based on the condition Reciever node need to generated , In some cases it wont generate any node ( No data )
Receiver Communication channel : I used FCC for Fixed length Format.
Problem : When i am generatingf the receiver file with some data it executes. But when i am generating the file with no data , it fails in the receiver comminication channel.
Could not process due to error: java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'ns0:Message1' found in document', probably configuration error in file adapter (XML parser error)'
I need the receiver file to generate with 0 bytes when there is empty data.
can any one help on this.
Thanks

Hi,
>>Problem : When i am generatingf the receiver file with some data it executes. But when i am generating the file with no data , it fails in the receiver comminication channel.
What happens in this case is, when you send a blank file to PI it processes but once it went to Receiver Adapter, it looks out for some fields because of the FCC settings. So it throws an error/exception because some fields are expected and it is not coming. Because of that you getting below exception.
Secondly, Once you send data with few values or fields it will process in Receiver file adapter FCC and if there is some error it throws error. this is why you getting exception in moni, and other places.
Regards
Aashish Sinha

Receiver file adapter posts multiples for singel source files

Hi,
I am using wild character in my input source ftp adapter but my receiver file adapter is creating multiple duplicate files. I am not sure why this happens as QOS is set to "Exactly Once" with archive processing mode. I tried with delete mode and the same error occurs. We had no problems testing it in our Dev environment but in QA its acting so strangely...Any advise is appreciated..
-Teresa

Hi,
2. Homany files you posted at oubound directory?
1. You said duplicate files at receiver side, is the files having time stamp? if so those are not duplicate files.
Thanks,
Satish.

Error in Receiver File adapter using File content Conversion

Hi,
I am getting the following error in the receiver file adapter.
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter 'statement.fieldFixedLengths' or 'statement.fieldSeparator' is missing
I am using the below parameters for FCC:
Recordset Structure - statement
statement.endSeparator - 'nl'
statement.fieldSeparator - '0X09'
statement.fieldNames -xblnr,wrbtr,newbs,kostl,newko,prctr,xref1,rke_wwfud,rke_wwst3,blart,bukrs,bldate,budat,gjahr,monat,ctype,waers,bktxt,posnr,wbs_element,mwxkz,businessplace,businessplace,c_waers,c_wrbtr,g_ctype,g_waers,g_wrbtr,h_ctype,h_waers,h_wrbtr,trade_id,lob,sgtxt,zuonr,reason_rev,ldgrp,tcode,lifnr
ignoreRecordsetName - true
Please let me know where i am going wrong.
Thanks,
Aparna

Hi Aparna,
I feel the problem in your content conversion parameters is with
statement.fieldNames and ignoreRecordsetName
When you are confirguring receiver file adapter for file content conversion the above one is not required. Please refer below link for details on configuring content conversion in file adapter
[http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm]
Hope this helps !!
Regards,
Amit

Dynamic file name (Date) in Receiver File Adapter

Hi,
can any one tell me how to create outbound file name with receiver file adapter in format like Name_22-08-2006.dat. I need from a current Date in the name of the message (without any other information). In message payload I dont have that date. Is it possible to use variable from user defined function in message mapping for that name?
Regards,
Naycho

Naycho,
that's exactly what I've managed to perform using DynamicConfiguration. Check these links:
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/09b16006526e72e10000000a422035/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/03fe1bdc7821ade10000000a1553f6/frameset.htm
Particularly, I've created a Java API for using setDirectory and setFileName methods through mappings. I use XSLT with java enhancement because it's a million times easier to parse and get node values with XSL than pure java.
I'm writing a blog on the subject, if you don't resolve the problem until it's out, let me know.
Regards,
Henrique.

Receiver File adapter Append Mode

Hi
I have scenario where i am sending multiple idocs to file ...when i putting the file construction mode to append i can put multiple idoc in to file but i wanna do it on daily basis Means i wanna send the newly crated or changed Idoc on a daily basis to a single file ..
How can i achieve that
SV

Hi
You can achieve this using dynamic file names.
Every day different files
FileName-<DD>-<MMM>
chk these
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
/people/sameer.shadab/blog/2005/09/23/an-interesting-usage-of-variable-substitution-in-xi
/people/sravya.talanki2/blog/2005/08/11/solution-to-the-problem-encountered-using-variable-substitution-with-xi-sp12
rgds
Arun

Receiver File Adapter Problem

Similar Messages

Maybe you are looking for