Record and suddently does not

Hi,
i manage to get my program to record. for example few days again when i play an mp3 windows media player, my program records the music with my microphone. it is fine by me. But BUT now all of the sudden my program does not record my music from windows media player or anything other play in fact. it only records the microphone!!
How can i make sure that my program always record the mp3, coz it is very important for the application i'm doing.
This is the code i'm using
private void captureAudio(){
try{
AudioFormat recordingFormat = getAudioFormat();
targetDataLine=     null;
targetDataLine = (TargetDataLine) AudioSystem.getTargetDataLine(recordingFormat);
targetDataLine.open(recordingFormat);
targetDataLine.start();
Thread captureThread = new CaptureThread();
captureThread.start();
} catch (Exception e) {
System.out.println("ERA0"+e);
System.exit(0);
}//end catch
}//end captureAudio method

curtfromsmithtown wrote:
Does the health kit app in iOS
You mean iOS 8.
work with the iphone 5?
Yes.
The motion   is turned on in and it does not record steps.
The iPhone 5 does not have the M7 Motion Sensor co-processor. It will not record steps.
The iPhone 5S has a motion co-processor as do the iPhone 6 & 6 Plus.

Similar Messages

  • I have quicktime pro and it does NOT have the screen record mode that Quicktime is suppose to have.  Can I uninstall it and go back to an older version that would have screen recording?  If so, how?  Step by step needed.  Thank you for your time.

    I have quicktime pro and it does NOT have the screen record mode that Quicktime is suppose to have.  Can I uninstall it and go back to an older version that would have screen recording?  If so, how?  Step by step needed.  Thank you for your time.

    Did you remove Quicktime X?
    On a normal install Quicktime 7 is installed in the Utilities folder and Quicktime Pro in the main Applications folder.
    You will need to reinstall OS X to get Quicktime X back if you have deleted it.
    I notice yor profile says 10.5.8. Quicktime X is only available on 10.6 and above.

  • Adobe Flash tried to play a live or recorded stream that does not exist. Source can't be found

    NOTE: This thread was started in the flash pro forum: http://forums.adobe.com/thread/898879?tstart=0 . However, because of adninjastrators recommandation, I open the thread here:
    Hello there,
    I have started a stream from Flash media encoder to flash media server. According to my encoder, it should be located at: "rtmp://localhost/live" and is called livestream.
    In the Flash  software I try and set the source of FLVPlayback component to "rtmp://localhost/live/livestream", and I get this error: "NetStream.Play.StreamNotFound : Adobe Flash tried to play a live or recorded stream that does not exist. Source can't be found.". Both the server and encoder is runnind and I am encoding.
    Too, when I try and open the html with the stream in a browser, nothing appears.
    What should I check?
    Thanks.
    Kind regards,
    Marius

    Thanks for your reply.
    Server, encoder and player are all on the same computer.
    Admin console confirms the existence of "livestream" of type "Live" and a "NetStream" called "ABAF". No idea what the latter is.
    Also, thought I'd mention that I have to start the servers from the Control Panel -> administrative tools -> services. If I try and start the server from the start menu, they dont start.
    Thank you for your time.
    Kind regards,
    Marius

  • Infotype 2001 Record 00000000           000000000000000000000000000 does not exist Message no. PG225

    Hi,
    I am trying to  create a record in infotype 2001 but getting error
    Record 00000000           000000000000000000000000000 does not exist
    Message no. PG225
    This error not come before.  I have created many records for the last few months.
    Please suggest how to resolve.
    Regards,
    Pathi

    Hi Pathi,
    I guess this is because of Activity Allocation and Cost Assignment. Plz check the Number range assignment:
    PA05 for Number range assignment for additional time data
    PT12 for HR document posting
    Thanks'
    Gautam

  • Unable to update, when executed table gets lock and Execution does not stop even for an hour.

    Following is my Query, which unables to update. When Executed, table gets lock and Execution does not stop even for an hour.
    update Employees 
          set Status = 'Close'
          where statusid IN (select statusid 
                                             from MyView 
                                              where DownloadedDate ='2014-07-27 00:00:00.000'
    here Employee contains 3,00,000 of records and Subquery return 1,50,000 Empid 
    i tried in various ways but not able to solve, statusid  column have no index on,  i tried using cursor but it does not work.
    plz let me know how to solve this Issue, Its very Important to get solve as all my further work depends on Updation
    , THANKS IN ADVANCE.

    See also your other thread with the same question:
    http://social.msdn.microsoft.com/Forums/en-US/80243625-fc3b-4ee1-bce1-4adcdbc16c14/unable-to-update-when-executed-table-gets-lock-execution-does-not-stop-execution-even-for-an-hour?forum=sqlserversamples
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • User WF-BATCH and BAPI_PO_RELEASE does not work without printer assigned

    Hello Gurus,
    The function BAPI_PO_RELEASE is used in our PO approval workflow, but this one does not work till the user WF_BATCH has no printer defined in USR01-SPLD. This is a strange behavior because the output message assigned to the PO has a message transmission medium equals to 5 (External send) => not print.
    Does someone have already met the same issue?
    How this could be solved without assigning a default printer to user WF_BATCH?
    Kind regards
    Chris

    Hello Tison,
    we're using also the WF-BATCH user having no default printer assigned and it works fine with the final release.
    However, there's usually the output message NEU with a prerequesite maintained that the PO has to be finally released. So this way there can be an additional output message found upon releasing. But we have a printer assigned using the condition records and we're not using the type that you've specified.
    So I'd guess that, indeed, the problem lies within the message. You could copy the WF-BATCH user to a dialog user and release the purchase order in dialog and see what happends.
    With the very best wishes,
       Florin

  • Record Z2 SP09 does not exist in table T133D

    Hi Guru,
    I want to configure the screen Material Master using
    IMG->Logistics-General->Material Master->Configuring the Material Master->Define Structure of Data Screens of Each Screen Sequence and
    Screen sequence : create Z1 
    Data screen Z1 : scrn 07 (Basic Data) and scrn 14(Purchasing)
    subscreen for : scrn 07(basic data ) 1002, 2001, 2561,2005 and
                           scrn14(Purchasing) 1005,2301,2701,2302
    When I create a Material it's ok, but if I switch from basic data to purchasing by clicking the tab sheet, I got an error : Record Z1 SP09 does not exists in table T133D ? When I saw at table T133D, SP09 did not there for sceen seq Z1
    (I saw for 01 / standard SAP) it's there.
    Anybody can help what wrong ?
    Thank's

    Cabe,
    I am pretty sure this is a bug with your IDES system. Basically, SP09 (note that it could be say SP02 etc depending on the number of screens defined in your Z screen sequence) is the function code that is associated with the pushbutton (or tab) for the purchasing screen (screen no. 14) in the material master.
    So, there should be an entry corresponding to function code (say SP09) and successor screen (say purchasing screen no. 14) in table T133D. If there is none, then message M3748 will be issued in function module T133D_SINGLE_READ_FCODE.
    I have tested this in my system and I don't get the error ME748. So, there must a bug or an OSS note missing in your IDES system which is causing an incorrect update of table T133D.
    I would suggest you to post the question in the ABAP forum if you need a better technical explanation of PAI events and reading function codes.
    Hope this helps.
    H Narayan

  • Newbie: Flash tried to play a live or recorded stream that does not exist.

    Hello there,
    I have started a stream from Flash media encoder to flash media server. According to my encoder, it should be located at: "rtmp://localhost/live" and is called livestream.
    In the Flash  software I try and set the source of FLVPlayback component to "rtmp://localhost/live/livestream", and I get this error: "NetStream.Play.StreamNotFound : Adobe Flash tried to play a live or recorded stream that does not exist. Source can't be found.". Both the server and encoder is runnind and I am encoding.
    Too, when I try and open the html with the stream in a browser, nothing appears.
    What should I check?
    Thanks.
    Kind regards,
    Marius

    So just to clarify, the server is installed on the same machine that you are using to do the encoding, correct?
    And you are using Flash Media Live Encoder to do the encoding?
    I don't have Flash CS5 for I'm not sure what is in there to do the encoding.. but more on FMLE here:
    http://www.adobe.com/products/flashmediaserver/flashmediaencoder/
    There are two step used to get the encoding going with FMLE...
    1. after setting all the config settings, click the "Connect" button. Then open the encoding log and you will be able to see if connection was made to the server or not. Can you successfully connect to the server? if not, what is the error message?
    2. click the "Start" button and in the encoding log, you will see that the audio and video encoding has started. What does the encoding log say?
    Best wishes,
    Adninjastrator

  • IPod Nano: Error Message "The USB device has malfunctioned and Windows does not recognise it"

    Hi everyone, I just received 2 brand new iPod Nanos for my kids for Christmas, thought I'd be smart and sync them both now before wrapping them so I don't have to be messing around with them on the day. One synced without a problem, then using the same cable, same computer, same USB port, the 2nd one came up with "The USB device has malfunctioned and Windows does not recognise it" I've tried restarting my computer, unplugging and reinserting the USB. Is there anthing else I can try before returning it? Thanking you for any help.

    I have solved my problem, I ended up ringing Apple and got an awesome lady who told me to reset it by pressing the sleep button and menu button together for about 10 seconds and once it actually turned on for the first time the computer then recognised it, so it's all good, :-) Thank you lovely lady!

  • Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click  on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

    Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click  on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

    Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
    In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
    After that is done reboot the machine and see if you can log in.
    If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
    Reboot and try again.
    If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
    Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
    Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
    Lots of work, but there is no Lion disks.
    https://discussions.apple.com/message/16276201#16276201

  • Since I downloaded the latest version of iTunes, my remote app on iPhone and iPad does not connect to iTunes library... Any ideas?

    Since I downloaded the latest version of iTunes, my remote app on iPad and iPhone does not recognise ,or connect to, my iTunes library... Any ideas ?

    Hi Pittgo76,
    If you appear to missing your iTunes library after a recent update, you may find the following article helpful:
    Apple Support: No content shows up in iTunes after updating
    http://support.apple.com/kb/ts1967
    Regards,
    - Brenden

  • Iphone and ipad does not find the airprint printer

    After I upgraded my iphone and ipad I lost my airprint function. Ipad and Iphone does not find the airprinter. The printer is a HP Photosmart 5520, and it does work wireless with my Windows PC that is on the same nettwork.

    In our case the Airprint printers could not be found after IOS upgraded to 7.1.2, all was fine before then.  I have scoured the forums and many people have suffered the same problem.  All the solutions given are aimed at a domestic network with just a Wireless router.  They all involve restarting all the devices and rejoining the IOS devices to the wireless network.  Some people have had to do it multiple times before they regained use of the printers.
    In my case none of these work because I am talking about a business network with two wireless access points, several switches and a router.  To prove it is the IPads I have installed Bonjour onto a Windows PC (Bonjour is the technology used by Airprint).  This finds the printers perfectly so it is definitely something that was changed in the version of Bonjour on the IOS 7.1.2 that is causing all the problems.
    I was hoping that Apple would release another upgrade to IOS to fix this problem but it has been several weeks so far and nothing has emerged.
    So something that worked perfectly a few weeks ago is now dead in the water because of an update on the IPads!!!!!!!!

  • My new Ipad 2 wifi does not charge and itunes does not find my device when pluged into my pc

    My new Ipad 2 wifi does not charge and itunes does not find my device when pluged into my pc. Help

    You should probably start here and go through all of the troubleshooting steps and then report back if you are still having problems.
    http://support.apple.com/kb/TS1538

  • Hp officejet pro 8100 and it does not print bar codes from UPS or USPS

    have an hp officejet pro 8100 and it does not print bar codes from UPS or USPS.  Can you please please help? i have used my ipad, by HP G62-355DX Notebook and neither will give me printed bar codes.  The balance of the mailing label do print, just not the bar code.  It may be my imagination, by I believe it used to print thebar codes.

    Hi,
    Try adding an alternate driver and try to print.
    To use an alternate print driver for HP printers in Windows 7:
    1. Click on the Start menu.
    2. Click on Devices and Printers.
    3. Click Add a Printer
    4. Add a local Printer
    5. Select Create a New Port
    6. Select Standard TCP\IP port
    7. Enter Printer IP address (Printer IP address can be found by printing network config page from printer
    8. Under Manufacturer select HP and under printer select HP Officejet 8000 pirinter or Officejet 7410
    9. Click apply and try printing
    Although I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • I want to transfer a movie I have downloaded from itunes to my new IPAD. I have been on the itunes help menu, it tells me to look under 'devices' tab for IPAD. BUT there is no 'devices' tab and it does not list my new IPAD. Help!

    I want to transfer a movie I have bought in itunes to my new IPAD. I have been trying to work how to do this for 3 days now. I have accessed all the itunes help and forums and wiki online. They all tell me to go to the DEVICES tab on itunes and select IPAD then sync. YUP seem simple, BUT there is not DEVICES tab listed on my itunes and it does not list IPAD. Years ago I set up my IPOD no problem and that is listed, but not the new IPAD. Can anyone help? I would love to be able to actually watch films on my IPAD!! thanks

    If you have iTunes 11 on your computer then you can enable the left-hand sidebar on it via option-command-S on a Mac, control-S on a PC - when connected (and if your computer's iTunes is up-to-date) your iPad should then appear on that sidebar under a 'Devices' heading :
    If you select the iPad on that sidebar you can then use the Movies tab on the right-hand side of the iTunes screen to select and sync that film to your iPad's Videos app.
    Has your iPad been synced to the computer before ? If not then you might find this page for syncing to a new computer useful : https://discussions.apple.com/docs/DOC-3141

Maybe you are looking for

  • Activate FM Master Fields in HR Info Type 14 & 15

    To support HR Payroll with FM Module Activation, normally, employee master data will has field of Fund & Functional Area to be input. These data will be use for normal payroll payment. HR payroll which is paid by Info Type 14 or Info Type 15 will not

  • My hard drive crashed and i reinstalled itunes

    when i reinstalled itunes to my computer i cannot access the music or videos that have already been synced to my ipod. is there a way to get the existing music back into itunes.

  • Mapping logical path valid name

    We have existing mappings with "." in logical path name such as www.test.com However, when we try to create a new mapping with "." in them we get a coldfusion error that states: Please enter a valid name for the mapping Is it possible to include char

  • Can recortsets be used as includes

    i have a few recordsets in one page and the page is becoming sluggish, is it possible to set them on a new page and have them as includes or do they need to be on the same page thanks

  • How do I make a project to create 800x450 movies?

    I've gone through all the specifications. It seems to never allow me to actually edit the pixel size. Seems that i'm supposed to switch to "desktop mode" for editing? but this box is not enabled either... Help! Thanks