Record/drive partition "jt machine" not found

When I click the record button, I get the following error message: record/drive partition "jt machine" not found
MacBook Pro, Powermac G4 dual   Mac OS X (10.4.7)  

Hi,
When I click the record button, I get the following error message: record/drive partition "jt machine" not found
Is "jt machine" one of your drives/partitions?
WH

Similar Messages

  • Record Drive/Partition not found

    I am getting this message when trying to arm a track for recording :
    Record drive/partition “es/Audio 1/Tom and Dirk/My Own Sweet Time/Audio Files/Audio Recording” not found!
    Any ideas? I was recording a take just fine and wanted to record a second take and got the above message. It does it when I create and arm another track for recording. I tried restarting the session, restarting Logic, rebooting the machine, repairing permissions all to no avail. What is going on?

    This is a BUG!!! A big one at that.
    I know 3 other Logic 8 users experiencing this.
    I do not know what causes it, although it may happen after you delete an audio region, like discarding a take.
    The "es/Audio 1/ etc... should say "Volumes/Audio 1/ etc... I've gotten "olumes/Audio 1/etc... and even had it read the exact name of the Audio path "Volumes/Audio 1/etc...
    However, if you had simply hit the "O.K." button, Logic would have taken you directly inside the proper Audio Files folder, where you would hit O.K. again, and be back up and running.
    So while this bug is quite annoying, just click O.K. at the prompts, and the original audio path will be restored.
    Hit Logic's Feedback page hard with this one.

  • Record drive/partition "Audio Files /Audio Recording" not found!

    HAAAAAAAAAA !!!!!! I get this message every time I want to record audio !!!!!
    Record drive/partition "Audio Files /Audio Recording" not found!

    myrna wrote:
    Any idea what path blogger Jim Frazier uses? BTY, only the audio portion does not record; the >instruments record just fine. If this is indeed a bug, is there a workaround that will get me recording >until a fix is found...
    I actually have not had this happen to me in several months, and in fact, haven't even thought about it in a while.
    But back when it would happen, I would be working away, recording audio without any problems, and then I'd hit record again for something, and out of nowhere, get a message like this:
    "olumes/Audio Drive/Album Projects/John Doe/Song title/Audio Files" not found.
    When the first word should have been "Volumes".
    So I would click and hold the record button to get to reset my audio pathway, and the proper path would already be listed. I would then merely click the "Set" button, and be back in business.
    And there were even a handful of times when I would get that message with the full name listed, the V was there in "Volumes', and everything listed correctly, and going to the record settings, everything was set properly. But I'd still have to hit "Set" to remind Logic where the pathway was pointed to.
    Definitely a bug.
    But... this bug never happened to me in Logic 7. It was only since installing and using Logic 8, that it occurred. And as I mentioned, it now hasn't happened in months.

  • Record drive/partition "500G Ext HD Western Digital" not found!

    I don't know why I'm getting this message when I open any songs I've recorded in Logic Express. It just started doing this today. Here is the message:{Record drive/partition “500G Ext HD Western Digital” not found!}
    I do not get this message when I open and work on songs I've recorded in Garageband.
    The 500G Ext HD is my external hard drive.
    Does anyone know what this means and how I can resolve it and get back to recording music??

    Does the disk appear OK on your desktop?
    When exactly do you get this message? When you double-click on a Logic file on your external drive? Or when you start a new project? Is your record path set properly in Logic?
    First, as you may be nearing a hard disk problem, make sure that all essential files are backed up properly.
    Then, open up your Disk Utility and run 'Verify Disk' and 'Repair permissions' on your external drive. If you have a copy of Disk warrior, even better.

  • Record Drive/Partition...

    I've got Logic Pro 7 the Academic version and for some reason it's giving me a whole ton of problems. The main one, though, is, when I go into the 24 track template, and click the record button, I get the following error:
    Record Drive/Partition "OS X HD" Not Found!
    I click ok, it goes into the file saving thing, I type in something (gtr1 or something) and it says:
    "Could Not Create File"
    Anyone know what might be going on?

    Every Logic song has an audio path that is where the audio files recorded will reside.
    What's happening, is that template/song is looking for a volume (hard drive) that doesn't exist on your system.
    When that prompt comes up, navigate to the hard drive you plan on using for recording audio, and select it. You can even goes a far as selecting a specific folder on that hard drive (recommended). Then save that song. The audio "pathway" will then be remembered the next time you open that template up.
    Read up on setting audio paths, saving songs as projects, and other related issues.

  • While running dcdiag /test:dns getting Warning: The AAAA record for this DC was not found

    DCDIAG /test:dns result is pested here.
    C:\Users\administrator.SUD>dcdiag /test:dns
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       Home Server = MUM-ADS-01
       * Identified AD Forest.
       Done gathering initial info.
    Doing initial required tests
       Testing server: Default-First-Site-Name\MUM-ADS-01
          Starting test: Connectivity
             ......................... MUM-ADS-01 passed test Connectivity
    Doing primary tests
       Testing server: Default-First-Site-Name\MUM-ADS-01
          Starting test: DNS
             DNS Tests are running and not hung. Please wait a few minutes...
             ......................... MUM-ADS-01 passed test DNS
       Running partition tests on : ForestDnsZones
       Running partition tests on : DomainDnsZones
       Running partition tests on : Schema
       Running partition tests on : Configuration
       Running partition tests on : sud
       Running enterprise tests on : sud.in
          Starting test: DNS
             Test results for domain controllers:
                DC: MUM-ADS-01.sud.in
                Domain: sud.in
                   TEST: Basic (Basc)
                      Warning: The AAAA record for this DC was not found
                   TEST: Forwarders/Root hints (Forw)
                      Error: Root hints list has invalid root hint server:
                      a.root-servers.net. (198.41.0.4)
                      Error: Root hints list has invalid root hint server:
                      b.root-servers.net. (128.9.0.107)
                      Error: Root hints list has invalid root hint server:
                      c.root-servers.net. (192.33.4.12)
                      Error: Root hints list has invalid root hint server:
                      d.root-servers.net. (128.8.10.90)
                      Error: Root hints list has invalid root hint server:
                      e.root-servers.net. (192.203.230.10)
                      Error: Root hints list has invalid root hint server:
                      f.root-servers.net. (192.5.5.241)
                      Error: Root hints list has invalid root hint server:
                      g.root-servers.net. (192.112.36.4)
                      Error: Root hints list has invalid root hint server:
                      h.root-servers.net. (128.63.2.53)
                      Error: Root hints list has invalid root hint server:
                      i.root-servers.net. (192.36.148.17)
                      Error: Root hints list has invalid root hint server:
                      j.root-servers.net. (192.58.128.30)
                      Error: Root hints list has invalid root hint server:
                      k.root-servers.net. (193.0.14.129)
                      Error: Root hints list has invalid root hint server:
                      l.root-servers.net. (198.32.64.12)
                      Error: Root hints list has invalid root hint server:
                      m.root-servers.net. (202.12.27.33)
                   TEST: Delegations (Del)
                      Error: DNS server: sud-ad.sud.in. IP:<Unavailable>
                      [Missing glue A record]
                   TEST: Records registration (RReg)
                      Network Adapter
                      [00000006] Intel(R) PRO/1000 MT Network Connection:
                         Warning:
                         Missing AAAA record at DNS server 10.1.6.132:
                         MUM-ADS-01.sud.in
                         Warning:
                         Missing AAAA record at DNS server 10.1.6.132:
                         gc._msdcs.sud.in
                         Warning:
                         Missing AAAA record at DNS server 10.1.6.133:
                         MUM-ADS-01.sud.in
                         Warning:
                         Missing AAAA record at DNS server 10.1.6.133:
                         gc._msdcs.sud.in
                   Warning: Record Registrations not found in some network adapters
             Summary of test results for DNS servers used by the above domain
             controllers:
                DNS server: 128.63.2.53 (h.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
    S server 128.63.2.53
                DNS server: 128.8.10.90 (d.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
    S server 128.8.10.90
                DNS server: 128.9.0.107 (b.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
    S server 128.9.0.107
                DNS server: 192.112.36.4 (g.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
    S server 192.112.36.4
                DNS server: 192.203.230.10 (e.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
    S server 192.203.230.10
                DNS server: 192.33.4.12 (c.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
    S server 192.33.4.12
                DNS server: 192.36.148.17 (i.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
    S server 192.36.148.17
                DNS server: 192.5.5.241 (f.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
    S server 192.5.5.241
                DNS server: 192.58.128.30 (j.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
    S server 192.58.128.30
                DNS server: 193.0.14.129 (k.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
    S server 193.0.14.129
                DNS server: 198.32.64.12 (l.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
    S server 198.32.64.12
                DNS server: 198.41.0.4 (a.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
    S server 198.41.0.4
                DNS server: 202.12.27.33 (m.root-servers.net.)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
    S server 202.12.27.33
             Summary of DNS test results:
    Auth Basc Forw Del  Dyn  RReg Ext
                Domain: sud.in
                   MUM-ADS-01                   PASS WARN FAIL FAIL PASS WARN n/a
             ......................... sud.in failed test DNS

    Hi Meinolf,
    Please find the IP Details as well as DNS test results.
    C:\Users\Administrator.SCI>dcdiag /test:dns
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       Home Server = MDCDCDNS
       * Identified AD Forest.
       Done gathering initial info.
    Doing initial required tests
       Testing server: MDC-Powai\MDCDCDNS
          Starting test: Connectivity
             ......................... MDCDCDNS passed test Connectivity
    Doing primary tests
       Testing server: MDC-Powai\MDCDCDNS
          Starting test: DNS
             DNS Tests are running and not hung. Please wait a few minutes...
     ERROR: NO DNS servers for IPV6 stack was found
             ......................... MDCDCDNS passed test DNS
       Running partition tests on : ForestDnsZones
       Running partition tests on : DomainDnsZones
       Running partition tests on : Schema
       Running partition tests on : Configuration
       Running partition tests on : sci
       Running enterprise tests on : sci.com
          Starting test: DNS
             Test results for domain controllers:
                DC: MDCDCDNS.sci.com
                Domain: sci.com
                   TEST: Basic (Basc)
                      Warning: The AAAA record for this DC was not found
                   TEST: Records registration (RReg)
                      Network Adapter
                      [00000009] Microsoft Virtual Network Switch Adapter:
                         Warning:
                         Missing AAAA record at DNS server 10.64.7.32:
                         MDCDCDNS.sci.com
                         Warning:
                         Missing AAAA record at DNS server 10.64.7.32:
                         gc._msdcs.sci.com
                         Warning:
                         Missing AAAA record at DNS server 10.64.7.35:
                         MDCDCDNS.sci.com
                         Warning:
                         Missing AAAA record at DNS server 10.64.7.35:
                         gc._msdcs.sci.com
                         Warning:
                         Missing AAAA record at DNS server 10.20.33.72:
                         MDCDCDNS.sci.com
                         Warning:
                         Missing AAAA record at DNS server 10.20.33.72:
                         gc._msdcs.sci.com
                         Warning:
                         Missing AAAA record at DNS server 10.20.33.71:
                         MDCDCDNS.sci.com
                         Warning:
                         Missing AAAA record at DNS server 10.20.33.71:
                         gc._msdcs.sci.com
                   Warning: Record Registrations not found in some network adapters
                   MDCDCDNS                     PASS WARN PASS PASS PASS WARN n/a
             ......................... sci.com passed test DNS
    C:\Users\Administrator.SCI>ipconfig /all
    Windows IP Configuration
       Host Name . . . . . . . . . . . . : MDCDCDNS
       Primary Dns Suffix  . . . . . . . : sci.com
       Node Type . . . . . . . . . . . . : Hybrid
       IP Routing Enabled. . . . . . . . : No
       WINS Proxy Enabled. . . . . . . . : No
       DNS Suffix Search List. . . . . . : sci.com
    Ethernet adapter Local Area Connection 7:
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : External Internal Virtual Network
       Physical Address. . . . . . . . . : 00-14-4F-CA-83-AC
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
       IPv4 Address. . . . . . . . . . . : 10.64.7.32(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : 10.64.7.1
       DNS Servers . . . . . . . . . . . : 10.64.7.32
                                           10.64.7.35
                                           10.20.33.72
                                           10.20.33.71
       NetBIOS over Tcpip. . . . . . . . : Disabled
    Ethernet adapter Local Area Connection 6:
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : TEAM : Team #1
       Physical Address. . . . . . . . . : 00-14-4F-CA-83-AC
       DHCP Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
       Autoconfiguration IPv4 Address. . : 169.254.105.163(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.0.0
       Default Gateway . . . . . . . . . :
       NetBIOS over Tcpip. . . . . . . . : Enabled
    Tunnel adapter Local Area Connection* 8:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : isatap.{2D5A4A27-298F-48E5-A376-EA886EF1E
    42A}
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter Local Area Connection* 9:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : isatap.{14FA7CD4-8B69-4C86-A58B-056793B7D
    901}
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Please check and revert back for any queries..
    Thanks...
    Deva Self-trust is the first secret of success.

  • AD DS Config problem (The AAAA record for this DC was not found) Cannot connect to ADUC

    I am trying to figure out what is wrong with my AD DS Config. I ran dcdiag. The results were:
    C:\Users\Administrator>dcdiag /test:dns
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       Home Server = R210_1_2K12
       * Identified AD Forest.
       Done gathering initial info.
    Doing initial required tests
       Testing server: Default-First-Site-Name\R210_1_2K12
          Starting test: Connectivity
             ......................... R210_1_2K12 passed test Connectivity
    Doing primary tests
       Testing server: Default-First-Site-Name\R210_1_2K12
          Starting test: DNS
             DNS Tests are running and not hung. Please wait a few minutes...
             ......................... R210_1_2K12 passed test DNS
       Running partition tests on : Schema
       Running partition tests on : Configuration
       Running partition tests on : bcas-tbf
       Running enterprise tests on : bcas-tbf.local
          Starting test: DNS
             Test results for domain controllers:
                DC: R210_1_2K12.bcas-tbf.local
                Domain: bcas-tbf.local
                   TEST: Basic (Basc)
                      Warning: The AAAA record for this DC was not found
                   TEST: Records registration (RReg)
                      Network Adapter [00000017] Hyper-V Virtual Ethernet Adapter:
                         Warning:
                         Missing AAAA record at DNS server 172.16.0.202:
                         R210_1_2K12.bcas-tbf.local
                         Warning:
                         Missing AAAA record at DNS server 172.16.0.202:
                         gc._msdcs.bcas-tbf.local
                         Warning:
                         Missing AAAA record at DNS server ::1:
                         R210_1_2K12.bcas-tbf.local
                         Warning:
                         Missing AAAA record at DNS server ::1:
                         gc._msdcs.bcas-tbf.local
                   Warning: Record Registrations not found in some network adapters
                   R210_1_2K12                  PASS WARN PASS PASS PASS WARN n/a
             ......................... bcas-tbf.local passed test DNS
    IPCONFIG info:
    C:\Users\Administrator>ipconfig /all
    Windows IP Configuration
       Host Name . . . . . . . . . . . . : R210_1_2K12
       Primary Dns Suffix  . . . . . . . : bcas-tbf.local
       Node Type . . . . . . . . . . . . : Hybrid
       IP Routing Enabled. . . . . . . . : No
       WINS Proxy Enabled. . . . . . . . : No
       DNS Suffix Search List. . . . . . : bcas-tbf.local
    Ethernet adapter vEthernet (Broadcom BCM5716C NetXtreme II GigE (NDIS VBD Client
    ) #36 - Virtual Switch):
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Hyper-V Virtual Ethernet Adapter #2
       Physical Address. . . . . . . . . : 00-26-B9-7E-81-74
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
       Link-local IPv6 Address . . . . . : fe80::bda9:1a28:974a:5fc3%19(Preferred)
       IPv4 Address. . . . . . . . . . . : 172.16.0.202(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : 172.16.0.1
       DHCPv6 IAID . . . . . . . . . . . : 335554233
       DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-0A-52-45-00-26-B9-7E-81-75
       DNS Servers . . . . . . . . . . . : ::1
                                           172.16.0.202
       NetBIOS over Tcpip. . . . . . . . : Enabled
    Tunnel adapter isatap.{AE70C63E-0A8A-4461-A789-8E4CD99CEA46}:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft ISATAP Adapter
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter Local Area Connection* 11:
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
       IPv6 Address. . . . . . . . . . . : 2001:0:9d38:90d7:1cf5:1d4f:53ef:ff35(Pref
    erred)
       Link-local IPv6 Address . . . . . : fe80::1cf5:1d4f:53ef:ff35%15(Preferred)
       Default Gateway . . . . . . . . . : ::
       NetBIOS over Tcpip. . . . . . . . : Disabled
    I'm unsure of what the problem is or what to do next.  Thank You.

    Disable IPv6 according to Pauls blog:
    Disabling
    IPv6 on Windows 2008
    After disabling run:
    ipconfig /flushdns
    ipconfig /registerdns
    restart the netlogon service or reboot.
    For co-existence from IPv4 and IPv6 see: 
    Configuring DNS for IPv6/IPv4
    Coexistence
    IPv6
    for the Windows Administrator: How Name Resolution Works in a Dual IPv4/IPv6 Scenario
    IPv6 for the Windows Administrator: IPv6 Fundamentals
    Hopefully, that fixes your issue.  Added some links to read in cause you want to.
    If it answered your question, remember to “Mark as Answer”.
    If you found this post helpful, please “Vote as Helpful”.
    Postings are provided “AS IS” with no warranties, and confers no rights.
    Active Directory: Ultimate Reading Collection

  • My PC sign: driver for keyboard filter not found. what can i do?

    my PC sign: driver for keyboard filter not found. what can i do?

    Hi:
    I don't think it is a big deal but let's see if we can find a driver for it.
    Please click on the missing keyboard filter in the device manager. Then click on the details tab. In the Properties drop down list, select the second item (Hardware ID's).
    Post  the top string of characters you see in the window.
    That will give me more information to go on.
    Paul

  • Internal drives locked - "chflags: command not found"

    My Intel MacPro has always had occasional issues with ownership and permissions ever since migrating my home folder from a PowerPC. As this is no longer my primary machine, I unwisely decided to do some tidying up. I have drives in 3 bays and they are all partitioned. In moving some data from one partition to another I encountered "you do not have permission.." so called up the Get Info window, noticed the privileges were set to 'custom' and decided to set this straight. And for the other partitions.
    So now every partition has a lock icon except the partition with the OS 10.5.8 on it
    Get Info won't allow me to remove the lock or change the privileges
    As of today, I now cannot boot from the 10.5.8 partition (no idea why this developed), so have booted from the OSX Install DVD
    Running Disk Utility I can verify the 10.5.8 partition ok (all other partitions still are locked) but Verify Disk Permissions returns "Error: The underlying task reported failure on exit"
    So I read a load of threads here and opened Terminal from the Install DVD and typed
    chflags 0 /volumes/*
    very carefully
    but it says
    chflags: command not found
    There is insufficient space on the unlocked partition to run an Archive & Install of the OS, and it won't let me install onto any other partition beause they're locked. I was considering booting it in Target Disk Mode - perhaps BatChmod works?

    BatChmod might work, but careful on the boot disk.
    Open Terminal & paste this in, spaces are important...
    chown root /Volumes/
    chmod 1777 /Volumes/
    then right after the last / of each line, carefully type the name of that external volume, & if it has spaces in it enclose the name in quote marks.
    See this User Tip by Niel: I accidentally set a disk's permissions to No Access ...
    If the disk in question is your Mac OS X startup disk and your computer stops starting up at the blue screen, restart with the Command and S keys held down, and enter the following commands:
    mount -uw /
    chown root /
    chmod 1775 /
    exit
    https://discussions.apple.com/docs/DOC-2240
    I think your original permissions problems were likely from already having an account setup on the new Mac before using MA, in that case the old 1st user on the PPC, (501), gets migrated to 502 on the new mac, & so on.

  • Error on SQL-DMO ( ODBC Driver data Source name not found)

    I Found the below error and all my maintenance jobs were failing with the same error.
    Do any one have any clue on it. help is much appriciated.
    Microsoft (R) SQLMaint Utility (Unicode), Version ??????
    Copyright (c) Microsoft Corporation.
    [Microsoft SQL-DMO (ODBC SQLState: IM002)] Error 0: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
    Sreeni

    Let us know if you see this issue in SQL 2014 as well. You can quickly create a SQL Server 2014
    Virtual machine on Windows Azure .
    http://azure.microsoft.com/en-us/documentation/articles/virtual-machines-provision-sql-server/
    Thanks, Sethu Srinivasan [MSFT] SQL Server http://blogs.msdn.com/sqlagent -------------------------------------------------------------------------------- This posting is provided &amp;quot;AS IS&amp;quot; with no warranties, and confers no rights.
    Please remember to click &amp;quot;Mark as Answer&amp;quot; and &amp;quot;Vote as Helpful&amp;quot; on posts that help you. This can be beneficial to other community members reading the thread.

  • Backup drive and transferred files not found

    I recently purchased a time capsule. I transferred some files from an older hard drive to the TC (they appeared on the TC) and then backed up my PowerMac G5 (wired directly) and my MacBook Pro (wirelessly) to the TC. The initial backups for these two computers worked fine, but I am now encountering two problems.
    1. The files I originally transferred from the old hard drive now don't appear on the TC (although it looks like they might be there based on the amount of TC drive space occupied). Is there anyway to access these older files (assuming they are still there)?
    2. Frequently when I try to enter TC from the PowerBook Pro, it says that hard drive not found. Also, it doesn't back up automatically. The only back ups are those I have done manually. The TC seems to be working fine with the wired PowerMac G5.
    I would appreciate suggestions on either topic.

    1. Have you changed the file sharing access on your Time Capsule since you copied your files? When you use the Time Capsule file sharing without accounts setup you have access to all of the disk. When file sharing with accounts is enabled you have access to a Shared file (where everyone has access and where your Time Machine backups are kept) and then to your own personal file (where only you alone have access). You no longer have access to anything that is not in the Shared file or your account file. If you have enabled account access then I would suggest turning it off which would then give you access to the whole disk and then moving the files you are referring to either into your Shared folder or your Account folder.
    2. Go to System Preferences, Time Machine, and then Change Disk. Select the name of your Time Capsule (this won't overwrite or delete any of your previous Time Machine backups). This should hopefully fix the problem.

  • With Windows 7 or 8 on my 2710p (built in webcam), the camera driver says "HP Webcam not found"

    I had the webcam running on my 2710p with Windows 7 for quite a while, but after I plugged in an external webcam once (I think it was Microsoft branded), it's almost as if my built in webcam dissappeared.  I tried formatting the computer to Windows 7 and now Windows 8 (both 32bit), hoping it that a fresh install would fix the issue, but when I try and install the sonix webcam driver from the hp drivers page for the 2710p (using W7 Home Premium 32bit drivers), it says "The HP Webcam has not found! Please plug in the HP webcam and then run installation again."  The only unknown device in my device manager is the PCI controller, which I don't really care for.
    What's going on here? I'm pretty tech literate but I'm kind of stumped here.
    This question was solved.
    View Solution.

    Webcams are fragile and I suspect yours has died. I think the fact that it happened while you were using an external webcam is coincidence.

  • New hard drive and time machine not backing up

    I recently replaced my MacBook Pro's hard drive with a larger HD.  After replacing HD and making sure all my data is operating correctly, I noticed my Time Machine is not backing up.  I was hoping it would continue to backup daily as soon as I was back on my home network but no such luck.  Does anyone know how to re-establish my conncection and hopefully start where I left off with daily backups?  Thx

    Check Pondini's Time Machine Troubleshooting.
    B6 seems to be the topic you are looking for.

  • Printer driver for brady ip600 not found

    Hi Friends,
    I need to print barcode label through Brady IP600 Model Printer, I didn't found the specific drivers for sap for this printer and please give some idea how i can make a device type for this model printer to print my Barcode Label.
    Thanks in advance

    It sounds like you may have a preference file left over from the Epson Stylus Color 860 printer.
    1) Have you followed the directory path, /Library/Printers/Epson/CIOSupport, to see if the plug-in exists.
    2) Check for a preference file named for the printer in  /Library/Preferences
    3) Check for a preference file named for the printer in  ~/Library/Preferences
    4) Check for an Epson print driver named for the printer in  ~/Library/Printers
    If you find items in those locations from Epson for the Stylus Color 860 printer, move them to the Trash or a folder on the Desktop. See if the message goes away.
    Be careful not to Trash any files related to the Gutenprint driver.

  • Hard drive partition device files not consistent between reboots

    For a reason I'm not completely certain of, the Hardware Abstraction Layer is causing my partition file descriptors to be different between bootups - causing a plethora of fstab-related issues.
    I have two hard drives in my computer, the primary one according to the bios being where GRUB and Arch are installed to.  Ironically, when it works, this drive is given "sdb." /etc/fstab is written to mount the partitions on sdb.
    The secondary hard drive has Windows 7 installed to it. This drive, when Arch Linux boots up properly, is considered "sda."
    However, half the time since enabling the HAL daemon, sda can become sdb and vice versa - causing partition mounting to screw up, naturally.
    I'll also note that attempting to mount sda2 (windows 7) in fstab causes the Arch drive to always be sda.  Rather frustrating, seeing as how I use symlinks to the Windows 7 user folders in my Arch user folders (Documents, Pictures, etc).
    Any help, please? :E

    Check: http://wiki.archlinux.org/index.php/Per … ice_naming

Maybe you are looking for

  • Icons disappearing in Photo app under iOS5

    iOS5 Photo app has major bug on iPad When you select folder and go into it, it is Ok. However when you leave the folder the icon of the folder and the name of the folder completely disappear as if its not there. The only way to get the folder back is

  • TV went black..

    It is less than 2 years old, and today the screen went black.  I still have audio.  Is it dead? It's a model 26av502u.  26 inch LCD. Solved! Go to Solution.

  • Problems using event structure to write new parameter values to VISA

    Attachments: FMA_event_2.vi ‏28 KB FMA_event_2.vi ‏28 KB

  • "Could not authenticate the specified user" error in HFM 9.2.1

    Hi, I'm installing Hyperion 9.2.1, and I have installed and configured shared service and hfm successfully, but when I failed to create hfm application. The reproduce step is: 1. login http://hostname/hfm/Home/LaunchPage.asp, with admin/password 2. c

  • Speaker on phone?

    hi i was wondering if anyone could help me, i have a blackberry curve 8520 (i think) a purple one. i got it on 13th of june 11 and it has never been dropped, or water damaged or anything that would cause it to break but the speaker has suddenly gone