Rectangle is not being shown in 10g Report But text is shown...

I created a new report manually using 10g reports.....i just put one text and one rectangle....Both are being shown when i run with paper design option in report builder itself......But when i run this through url....Only text is being show not rectancle...........
Why ........Please help me..

you need to configure your application Server if calling from an application server
if calling from the same machine then configure your OC4J container properties in the config files located in server folder of your ORACLE_HOME

Similar Messages

Materialized view not being used in the report

I have had a materialized view (MV) for a particular report. Recently, the report definition has changed little bit, so the existing MV is not being used by the report anymore. I copied the code Discoverer's SQL Inspection and recreated the materialized view. But still it is not working. Obviously, I am missing something at the database level. Does anyone have any idea? The database is 9i and Discoverer is 9.0.2. Thank you!

The SQL that you see from the Inspect SQL option will provide you with the SQL that Discoverer sends to the database. The database then may do a query rewrite to point to an available materialized view if available. This rewrite won't be seen from the inspect sql option. You need to check at the database level to verify if a query rewrite did in fact take place.
You may want to check the section titled "Query Rewrite with Materialized Views" from Ch1 - "Introduction to the Optimizer" in the Oracle9i Database Performance Tuning Guide and Reference, Release 2 (9.2), Part Number A96533-02, available at http://download-uk.oracle.com/docs/cd/B10501_01/server.920/a96533/optimops.htm#37287
Regards
Abhinav Agarwal
Oracle Business Intelligence Product Management
http://www.oracle.com/bi
http://www.oracle.com/technology/documentation/bi_ee.html
http://www.oracle.com/technology/software/products/ias/htdocs/101320bi.html
http://oraclebi.blogspot.com/

Where clause is not being passed to the report

I just upgraded my crystal reports from 10.0 to 11 R2. Reports were working fine in 10.0 version,
Reports are called from vb.net (vissual studio 2005). When I was running this reports using crystal 10.0 and visual studio 2005, it was working fine, After the upgrade report runs but I am noticing that where clause is not being passed to the reports.It generates report as there is no where clause and produces multiple pages report.

I believe you are encountering an issue documented in [this|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bip/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] note.
Ludek

This is a stupid question but I needed to ask because I don't want to go there and not being able to buy it, but can I get the iPhone 5 brought straight there when I go to an apple store?

This is a stupid question but I needed to ask because I don't want to go there and not being able to buy it, but can I get the iPhone 5 brought straight there when I go to an apple store?

And I meant go to the apple store physically without preordering it online, and I meant the Southampton one. So could I just stroll in apple store and buy a iPhone 5 in Southampton apple store and buy the iPhone 5 straight away? Because I didn't want to have to wait? I just want to go in and buy it and go out with it, if you guys get what I mean? And felipeV if it is in stock could I just buy it and leave with my iPhone 5?

TS3276 my emails are not being sent from my desktop, but are capable of being sent by my apple phone. as well, I cannnot pull up any emails that I sent. They just disappear.

my emails are not being sent from my desktop, but they are capable of being sent from my iphone 5. Whatever I have sent just disappears from my desktop.

R1: Seems you didn't configure you email account in your Outlook client properly. please refer to the following KB article and try to create a new mail profile to configure your email account again:
http://support.microsoft.com/kb/2758902
R2: Do you want create subfolders under Inbox to category your emails? If so, we can just right click on Inbox > select New Folder... After that, we need to create rules to move or copy your emails to each subfoler. See:
http://office.microsoft.com/en-us/outlook-help/manage-email-messages-by-using-rules-HA010355682.aspx
Besides, in order to avoid confusion and keep track of troubleshooting steps, we usually troubleshoot one issue per thread in order to find a resolution efficiently. Concerning your other question, I suggest we create new posts for your other questions via:
http://social.technet.microsoft.com/Forums/en-US/home?forum=outlook
Thanks for the understanding.
Steve Fan
TechNet Community Support

AADC Shown on .PQR report but Not within mailstream's endorsement line

We are mailing 1st class letters, palletized mail that qualifies for Full Service discounts. An interesting thing happened recently. on a job of 853 pieces, the PQR report listed 3 trays of 597 pieces that qualified for the auto 3-digit rate, 1 tray of 142 pcs that was listed under the AB column and 1 tray of 114 pieces at the single piece rate.
The 142 AB pieces are the ones in question. This was listed as tray 4 with the following tray size and level "1-U 3DG".
My question is if these pieces qualified for the AADC rate, why did the individual maiplieces contain the "AUTO 3-DIGIT" phrase in the endorsement line? If they did NOT qualify for the AADC rate but qualified for the 3-Digit rate, why were they listed under the AB column?

This issue really should be logged for support as we would like to take a look at your job. Please follow the steps below to log a support ticket.
1. Go to http://service.sap.com/bosap-support.
2. Click on "Create a message / Contact technical support".
3. Under System Search, click the drop down arrow next to your installation and choose your system, and click Search and then click on the BOB link.
4. When creating a SAP message it is required to search for Notes. (Knowledge Base articles) to see if you can find an answer to your question without having to log the message for support. In the Search Terms area, type your question and click Continue.
5. If you do not see any Notes pertaining to your question click on Create Message.
6. Choose the correct Component for the product you are creating the message for. The component is the support Q that your call will go into so the correct team can assist you. To do this click on the icon next to the icon next to the Component window to see a drop down list.
7. Click the arrow by BOJ-EIM to see a more detailed list. By each component the names of the u201Cproductsu201D you are using are listed. Choosing the correct component will get your Message logged for the correct support team.
For example:
a. BOJ-EIM-COR is used for ACE, DataRight IQ, Match/Consolidate, IACE, and FirstPrep products.
b. BOJ-EIM-COM is used for DeskTop Mailer, Business Edition, Presort, PrintForm, Label Studio
c. BOJ-EIM-DEP is used for DQXI, Data Insight, eDQ Infa, SAP Siebel, PSFT, Oracle, Rapid Library
8. After choosing the component, fill in any remaining required/optional items. **Required fields under Problem Details are flagged with a red asterisk.
u2022 In the Short Text box, enter a brief description of the question or issue.
u2022 In the Long Text box, you can go into further detail about what you are seeing or questioning.
u2022 click Send Message.
Thanks,
Bryan

Udf Data is not being displayed in the report

Hi all,
i have designed one report in which i am displaying some udf fields along with other system fields.
i have not used any selection criteria.
when i run report it doesn't display udf data of some random rows in the report even if data is peresent in that udf field.
If i open sales order and press 'Shift-F2' and update the document and now if i run report then i get that udf value in the report.
why this happening. data is there in the udf field only its not displayed in the report with out updating the that udf.
pls suggest some solution.
regsrds,
Chetan.

Hi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao.

Plan values not being displayed in the report ..

Hi All,
I have a query on query.. .
which displays actual and plan values , but the report is not showing the plan values
tell me how to do this
Sruthi

Sruthi,
Basically how do you store the data in the transaction cube's ?
How does the data differs b/w Plan and actual for the same KF ?
It stores depending on the Version...
Restrict the KF to a perticular version ...
Then you can get the desired...
Check the LISTCUBE with different versions..
Cheer's
HVR.

Excise Invoice number range not being picked by crystal reports

Hi all,
We have a Crystal Report that generates the Invoice document based on the invoice number which is an input a parameter. The report is built on 'SAP Table,Cluster or Function' type connection. The Invoice numbers are updated into the source system. Current invoice series is *****0001,.....****0052,****0053,****0054.............****0100......****0111,****0112,*****0113.
The problem is that the Crystal Report is working fine till ******0111 but it is returning a blank values for Invoice numbers ******0112 and others following. We checked the data in the SAP system and the details for Invoice Numbers ******0112 and others are available in the SAP system.
While i select the Excise Invoice number field of the corresponding table and clicking on browse data it is showing invoices upto ******0052.
Please help.
Thanks and Regards,
Raja.N

Hi
is this data coming from a single table or are joins involved ?
did you try a report simple on a single table to see if the data would be returned ?
ingo

Ipod not being recognised by itunes..but by pc

Gosh..it seems like a lot of us have problems!!
I had everything working fine. Tonight I imported some cds - then I plugged in my mini...ping...(ie connected)..but it's not showing up in itunes. It does show up as an 'e'drive in my computer. I've reinstalled itunes 5.01 (I had gone back to the version that came with the disk!).
Anyone got any suggestions...I'm going on hols tomorrow!!

I have the same issues. itunes 5.0.1.4 doesn't recognize my mini. ipod updater doesn't recognize my mini either. i have uninstalled itunes 5 and reinstalled 4.9, but it didn't work still. something in itunes 5 changed something in my system that reinstalling 4.9 doesn't fix it. updater just shows that i have no ipod connected. if i try to get updater to check for my ipod during the updater installatin, it just sits there and says "waiting for ipod". it's not my usb port because i can read and write to my ipod. i did the entire list of chores that apple suggests on the site including disabling all other functions and services, reinstalling the com port, uninstalling everything, reinstalling everything, getting windows install clean up, e v e r y t h i n g! nothing worked.
I then installed itunes 4.9 and updater 1.4 in my other laptop. i was able to update to firmware 1.4 using that computer. when i put the ipod into that computer w/ itunes 4.9, everything works fine. of course, it asks me if i want to link that laptop w/ my ipod. i said no, because i want to use my original laptop w/ the ipod.
anybody have a solution for this? it's like we all have the same symptoms and going to the same doctor and we end up having to diagnose ourselves. this is extremely annyoying and inefficient.

Why are some texts not being received on my iPhone but are on my mac

I just got a new iphone 5C. A friend sent me some pics in a text and it didn't show up on my iphone. The text and pics did show up on my mac though. Can anyone tell me if I have something set wrong on my iphone?

If it showed up on your Mac, that was an iMessage - not a text message as in SMS/MMS.
Was the iMessage addressed to your cell phone number or to your Apple ID email address?

Ical invites not being sent from MacBook Pro but are being sent from iphone

Hoping someone can please help me! I am suddenly unable to send iCal invites from my laptop. They look like they send, but nobody receives them and also the events don't show on my iPhone and iPad2. If I add the event on my iPhone, I do see it on my laptop. I recently did a system update and I wonder if that is the cause. Any help you can give me would be so appreciated. Thanks.

I am having this problem as well. Specifically, when I create a new calendar meeting I am able to add users to the invitation and when I save the invite it gets sent. I have also modified an existing calendar event that has other people invited, and when I exit editing the meeting a pop up window specifically asks if I want to save my changes "and send it to the other invited participants" or something like that.
I click yes.
In both cases (the original creation and invitation, and the modification and send update to attendees) nothing is received by the other recipients. Not a calendar event or invitation, not an email with a .ics attachment or similar, or not even an email notification.
Thus, I set up an event in my calendar, invite others, and no one is aware that the event was set up.
Is there any way around this? I don't think I'm doing anything wrong as the process of creating an event, inviting someone, and sending out the invitation seems pretty straight forward. It just isn't working.

Not being seen by Solution Center, but seen by Doctor?

Problem with Photosmart C6280. After a lot of other problems, this one has stopped me in my tracks.
the Print/Scan Doctor can see my printer, but can't print test page,
Tried to install Solution Center, but don't see any of my two printers (that my Firefox broswer sees) and Windows Device & Printer sees.
My Network Configuration Page printout states that the printer status is Ready, and Active Conn Type is Wired
All my wires are firmly in router, printer, & computer.
Printer is turned on!
What's next?
Please Help. Wedding photos are waiting.
Jennifer

Most of the steps you listed are typically steps to resolve a problem.
What problem are you trying to resolve initially?
Also, what operating system does the computer use?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Ipod not being detected by Windows

Hey! I've asked this question before, but no one has given me anything yet. Not being selfish or anything. But when I put in my ipod my computer tells me:
One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it.
For that, Itunes doesn't detect it either. Can't put songs on when that happens and it leads to an very distressed kid. Can someone help me and others who have this problem?

but then I'll have to get all the song from CD's again.
If they are all in your iTunes library and you sync your iPod, when you get a new iPod, you just need to sync it to the library. If you've been manually managing your iPod's content, and the songs are not stored on your computer, well, you were taking a chance that the iPod would break or get lost.

Select * from tab is not working in oracle 10g

select * from tab is not working in oracle 10g. But at the same time,
select * from <<table>> is working.
Please advise me.

This works for me in 10.2.0.2
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
SQL> select * from tab;
TNAME                          TABTYPE            CLUSTERID
LOAN_DETAIL                    TABLE
PLAN_TABLE                     TABLE
...

Rectangle is not being shown in 10g Report But text is shown...

Similar Messages

Maybe you are looking for