Reference Key3 in F-22

Hello ;
I need a matchcode for Reference Key3 -XREF3 in F-22.
Is it possible ?

Hi
There is no F4 possibility for Reference key 3 - field.
Without possible entries - how can you define a match code.
It is not possible.
VVR

Similar Messages

O7Z4 - Line Layout in F-03, Administrator setting

Hi,
1. We have a layout in O7Z4, which we use in F-03.. There are many fields in that layout so all are not invisible in one go.. For this I need to go to the Configuration tab at the right hand side of the Open item display page and make fields visible which I want to see.
I did that and the fields are visible also..but the Reference Key3 field which I chose, shows blank and does not show any value, whereas the data exists in that document No.
2. In addition to this, even if at the selection screen, I give Reference key 3 field in F-03, first screen in additional selections, system shows "No Open items available" even though that Document No. has postings with Ref key 2 field with the same value that I am entering as an input.
Does anyone have any idea as to what could be the issue.. Why system is not reading Reference key 3 field from Additional selections.
Regards,
SAPFICO
Edited by: SAPFICO on Mar 23, 2011 3:08 PM

Hi Deepak,
Thanks for your reply. But do you know what is the exact size that SAP allows..
Because I decreased the size of the text and tried to insert Posting key of two charachters but even then it was not showing. It shows maximum 11 fields in display.
But it allows to configure maximum 15 items in O7Z4.
If you have any idea, please let me know.
One more thing, if you go to configuration, and adjust the basic setting variant, in xn cofr f-03 then you will be able to see all the fields. But it does not come as default.
SAPFICO

Problem in F.13 GR/IR clearing

Hi,
I have two documents, one related to MIGO and one related to MIRO. The same amount of GR/IR clearing account is credited and debited in MIGO and MIRO respectively. But when I am clearing these both documents, it's not getting clear. We have criteria for automatic clearing is Reference Key3, Amount in local currency and Clearing document. At the time of F.13, system is showing me the message "Consolidated companies 1000 and ' ' are different".
I have configured "AB" document type for clearing. Inter company transaction is not ticked in AB document type. Screen shot of F.13 is attached herewith.

Hi Sanil,
I have checked the entries. Actually these entries are related to rejection. It means, at the time of MIGO, GR/IR account was debited and at the time of MIRO entry it was credited. And I need to clear these debit and credit entries.
As per your suggestion, I have checked the vendor master. At the time of MIGO, there was trading partner but before the MIRO, trading partner was removed form vendor master.These entries are related to 2009.
Pl help how can I clear these entries.
Regards,
Ankit Agarwal

Vendor Clearing with Profit center

Hi All,
We have requirement as below:
While making vendor payment our client wants to choose Profit center as a sorting option.
Vendor bill booking (MIRO/FB60) level Profit center is updated in the General ledger view. But it's not showing while clearing the same bill (F-53) by choosing profit center as a Sorting field.
At the time of Bill booking (MIRO/FB60) at entry level Profit center is not updated. By using New General Ledger we get the respective profit centers in vendor line items, those are derived from the GL accounts line items. ( expense /GRIR Lines) and it is with this profit center that the journal entries are created in FI
We are getting Profit center at General ledger view level but not the Entry level. So at the time of vendor payment (F-53) we are not getting the Profit center wise vendor invoice details.
We have identified possible solutions as below, but nothing was worked out. So can you please suggest the possible options.
Book the invoice (MIRO/FB60) by entering profit center in Non valuated fields (Reference, Document header text, Assignment and Reference key1/2/3 etc). In this case lets use Reference Key3 and make this field as a mandatory field for substitute Profit center field in Vendor line item level. But later we identified that Reference Key3 is using for "As a part of SAP Thai localization, a withholding tax certificate number is stored in the Reference Key 3 field of the vendor item" So we can't use reference key 3. Remaining Ref key fields are using for some other purpose.
Thanks in advance.
Prasad

Dear Prasad,
Why dont you make cheque issue accounts of all profit centers as fixed in T.code FAGL3KEH so that at GL view you can see profit center

Error in VBA reference for Adobe Photoshop CS4 Object Library

Hello,
I'm using Windows 7 Pro, MS Office 2010 Pro and Creative Suite CS4 (with all updates).
I will automate Photoshop via Visual Basic for Applications in MS Access.
Befor using there the Adobe Photoshop CS4 Object Library I must reference it in VBA.
But when I will du this, I get the message "Error loading DLL".
When I will manually reference to the WIASupport.8LI File, I get the error: "Cannot reference this file"
Can you give a tip, how I can solve this problem?
Regards

I have the same problem! I have photoshop cc2014 (which we own) and the object library shows, but not for cs 5.1 (30 day trial).
Does registering unlock something?
Help please!!

"cacheHostInfo is null" and Add-SPDistributedCacheServiceInstance : Object reference not set to an instance of an object.

I am working on a standalone install Sharepoint 2013 (no Active Directory). I found newsfeed feature is not available and checked Distributed Cache service is stopped. When start it “cacheHostInfo is null” is returned.
I checked the Windows service “AppFabric caching service” is stopped because the default identity “Network Service” not work. Then I change the AppFabric service identity to use “.\administrator” (which is also the sp farm administrator) and the service can
be started.
However the “cacheHostInfo is null” when try to start Distributed Cache service in central admin.
I searched on web and found this blog: http://rakatechblog.wordpress.com/2013/02/04/sharepoint-2013-spdistributedcacheserviceinstance-cachehostinfo-is-null/
I tried to run the script but it return error:
Add-SPDistributedCacheServiceInstance : Object reference not set to an
instance of an object.
At C:\root\ps\test.ps1:8 char:13
+ $whatever = Add-SPDistributedCacheServiceInstance
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidData: (Microsoft.Share…ServiceInstance:
SPCmdletAddDist…ServiceInstance) [Add-SPDistributedCacheServiceInstance]
, NullReferenceException
+ FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletAddDistr
ibutedCacheServiceInstance
I am not sure what went wrong. Please give me some idea? Thank you for any comment!

Can you deploy Active Directory as installing without is not a supported installation scenario - http://support.microsoft.com/kb/2764086.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Cross Reference Source text options

Creating a Cross Reference linking to a Paragraph. In the paragraph where the cross-reference source is inserted, may the cross-reference link be applied to existing text in that paragraph so that the cross-reference destination text does not appear? Text anchors can be created to accomplish this, but that is an extra step (I can create a cross reference linking to a paragraph all in one dialog box). Thanks in advance for any suggestions.

Hi, Seir:
I agree that it's confusing. Here's how I do it:
To create a text anchor at the insertion point location:
* Open the Hyperlinks/Cross-References panel's menu (also called "flyout menu." It's the small icon at the upper-right of the panel, below the double-arrow (>>) icon that collapses the panel.
* Choose New Hyperlink Destination. THIS SHOULD BE NAMED NEW TEXT ANCHOR!!!
* Choose Type: Text Anchor
* Name the anchor as you like Click OK.
To create a cross-reference to a text anchor:
* Place the insertion point where you want it.
* Click the Create new Cross-Reference button on the bottom of the Hyperlinks/Cross-Reference panel.
* Choose Link To: Text Anchor
* Choose the target document
* Choose the text anchor
* Choose the Cross-Reference format
* Choose Appearance properties
* Click OK
I'm not sure what could cause the straight/curly quotes problem other than perhaps the font doesn't have curly quotes. Have you tried other fonts?
HTH
Regards,
Peter Gold
KnowHow ProServices

Report generation toolkit and signal express user step : problem of closing reference in "Stop" event

Hi all,
I'm trying to make a package of Vis to easily make Excel reports with Signal Express. I'm working on LabVIEW 8.2.1.
I'm using the report generation toolkit, so I build a .llb from my project which contains all the hierarchy of my steps, but also the hierarchy of dynamic VIs called.
I have made some steps, like "Open Workbook", "Write Data", etc.
My steps run well, excepts one step : "Close Workbook".
If my "Close Workbook" step is firing on "Run" Signal Express event, I have no error, so my reference is properly closed.
But if my "Close Workbook" step is firing on "Stop" Signal Express event, I have an error "1", from "Generate Report Objectrepository.vi".
I feel that I'm trying to use a reference which has been killed in the "Stop" step...
I would like to know what exactly do Signal Express on "Stop" event and why my close function does'nt run well.
Thanks,
Callahan

Hi Callahan,
SignalExpress (SE for short) does the following on the Stop event:
1. Takes the list of parameters that SE found on your VI's connector pane, and sets the values that the user set from the "Run LabVIEW VI" configuration page, if any.
2. Then tells the VI that SE is running the Stop event by setting the Enum found on your VI's front panel. This in turn should produce some boolean values telling your VI to execute the Stop case.
3. The VI is then run, with those values and states.
4. SE checks to see if any errors where returned.
5. Since this is the Stop event, SE releases the reference to the VI which it possesses.
Questions for you would be, is the reference to your Workbook linked to a control on your connector pane, or held in a uninitialized Shift Register. If it's held in a Shift Register, SE would not be aware of it, and would not be able to affect that reference.
Hope that helps. Feel free to post your LLB if it doesn't.
Phil

Excel Get ActiveX References.vi and closing references -- grrr

I'm new to ActiveX stuff, but eager to learn!
The "grrr" in my Subject line is a reference to how I feel about LabVIEW's documentation from time to time. I'm a dinosaur who came from text-based programming, and did a fair amount of C coding, so sometimes with LabVIEW I'm left with this awful feeling in the pit of my stomach like, "Good grief! How much memory must LabVIEW be hogging up in the background when I use this vi?" or "What happens to those variables (wires) in that subVI when it completes but doesn't close? What are their statuses when I come back in the next time?" or "What if I put a lot of elements into that array the first time and then started from element zero the second time and just put in a few? What has happened with the memroy that was allocated when there were a lot of elements?"
Today I'm stewing about this "Excel Get ActiveX References.vi," and what happens to the "ActiveX references" it generates each time I call the subVI in which "Excel Get ActiveX References.vi" lives. I think that at least one of the "ActiveX references" it generates when I call it is of the type Excel._Application. Then there appears to be an Excel._Workbook, and others. You see, I've used "Excel Easy Report.vi" to put some data into an Excel spreadsheet, and I want to tell Excel to do a "Save" on the open spreadsheet. I think ActiveX is the (a) right way to do that, so I'm wading into the ActiveX fray... But this "Excel Get ActiveX References.vi" says in its help file, "Do not close ActiveX references opened with the Excel Get ActiveX References VI. References must remain open until the report is closed. Otherwise the error 3001 will occur." Well, these Excel workbooks that get created by my VI could well stay open until after my LabVIEW VI terminates!
So (finally), here are some of my quesitons:
1) When I go through my subVI once, pointing to one workbook, I'll get one set of references "created" or "opened" or whatever you call it when ActiveX references spring into existance. Now, when I exit the subVI, is it going to automatically try to "close" those ActiveX references? I don't suppose so, since subVI's stay in memory until the calling VI closes.
2) Now, I come back into my subVI a second time. New workbook gets created, so I get new references. Ok, fine. Uh oh! What happened to those old references? I suppose that if I didn't somehow save them off, I've probably lost the ability to get them back (maybe I'm wrong, but I don't need them back), but is LabVIEW going to "close" those old references (from previous times through the subVI) because I can't get to them anymore? Won't that cause the dreaded error 3001? If LabVIEW is not going to "close" them, what in tarnation happens to them (the old C programmer in me creeping back out)?? Now it's some oddball, orphaned reference, floating out there, hogging memory, waiting to make something crash intermittently and be a debugging nightmare?
3) Now, here's the real scary one. I think I might dodge the "error 3001" bullet in questions 1) and 2), but now let's say the user closes my LabVIEW application while Excel is still open. All those workbooks are still open. Presumably, all those ActiveX references I was not supposed to close are still open. I really hope that LabVIEW is decent enough to close/erase/delete/blow-away (whatever the right word is) all those ActiveX references which were opened/created by "Excel Get ActiveX References.vi" when my program terminates. But, oh no! Won't the error 3001 come along then? I suppose I can just dump it in the shutdown error handling.
Well, thanks for reading my novel. I don't know what can be done with LabVIEW documentation to make it more satisfying to folks like me, but perhaps someone can weigh in on all my ActiveX questions here.
Thank you in advance,
Steve Brady
Solved!
Go to Solution.

You need to close EVERY ActiveX reference you open. If you don't you'll end up with some Excel processes running even after LabVIEW exits. You can see them in Task Manager.
I, personally, don't like the LabVIEW Report Generation Tool Kit for working with Excel. I don't think it's flexible enough. I have a growing library of VIs that I've written that open, manipulate, and close Excel. Some references I pass from VI to VI and some I close right after I use them. It all depends on what I'm doing. If I want to enter read or write data from/to a certain range I'll get the range reference, read or write the data, then close it right away because I have no use for it any more. On the other hand, when I open Excel or a Workbook I keep the reference until I'm done, which could be later in the program.
1) When I go through my subVI once, pointing to one workbook, I'll get one set of references "created" or "opened" or whatever you call it when ActiveX references spring into existence. Now, when I exit the subVI, is it going to automatically try to "close" those ActiveX references? I don't suppose so, since subVI's stay in memory until the calling VI closes.
2) Now, I come back into my subVI a second time. New workbook gets created, so I get new references. Ok, fine. Uh oh! What happened to those old references? I suppose that if I didn't somehow save them off, I've probably lost the ability to get them back (maybe I'm wrong, but I don't need them back), but is LabVIEW going to "close" those old references (from previous times through the subVI) because I can't get to them anymore? Won't that cause the dreaded error 3001? If LabVIEW is not going to "close" them, what in tarnation happens to them (the old C programmer in me creeping back out)?? Now it's some oddball, orphaned reference, floating out there, hogging memory, waiting to make something crash intermittently and be a debugging nightmare?
3) Now, here's the real scary one. I think I might dodge the "error 3001" bullet in questions 1) and 2), but now let's say the user closes my LabVIEW application while Excel is still open. All those workbooks are still open. Presumably, all those ActiveX references I was not supposed to close are still open. I really hope that LabVIEW is decent enough to close/erase/delete/blow-away (whatever the right word is) all those ActiveX references which were opened/created by "Excel Get ActiveX References.vi" when my program terminates. But, oh no! Won't the error 3001 come along then? I suppose I can just dump it in the shutdown error handling.
1) No, LabVIEW will NOT close those references. You need to make sure that happens.
2) You can save the references in a functional global or use a class but if you're not going to save them close them as soon as you're done with them.
3) Your user should not be able to close your LabVIEW application without it going through the shutdown routine you've created for your program. The ABORT button should never be exposed to the user and you should capture and discard the panel close event so your program ALWAYS shuts down is an orderly fashion. If you don't you will have fragments of Excel hanging around in your operating system and will have to kill those processes using Task Manager. That should only be a problem during development, not once deployed.
I used to program in C and Assembly many moons ago. You should have seen my first LabVIEW code. I go back and look at it just so I can see how far I've come in the last 12 years. I feel your pain.
Kelly Bersch
Certified LabVIEW Developer
Kudos are always welcome

Error 7 occurred at open vi reference in New Report.VI

Hello!
I use the report generation toolkit on LabView 7.0 to create a report in Excel. The program works fine until I make an executable version. I the get the error:
Error 7 occurred at open vi reference in New Report.VI
I use the New Report.VI, Bring Excel to front.VI and Save Report To File.vi
Can you pleace help me!!!

Most likely, you did not include the required libraries in your build script. When building an executable in which you use the Report Generation Toolkit, you must include the _Word Dynamic VIs.vi from _wordsub.llb and _Excel Dynamic VIs.vi from _exclsub.llb as dynamic VIs on the Source Files tab.
Check this article for more info.
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/86256a47004e16d186256a84004cb883?OpenDocument
Daniel L. Press
PrimeTest Corp.
www.primetest.com

Open VI Reference for a Project Library VI

Hi,
my code calls some subVIs by reference by using "Open VI Reference" and "Call by Reference" VIs. Now, "Open VI Reference" expects a path to the VI:
When the SubVIs sit in the same folder as the calling VI, it is easy to simply supply the name of the SubVI. However, I would like to call a SubVI that is part of a project library sitting somewhere else on the disk. I could give the relative path, but this make the code pretty inflexible and if the relative path changes all the paths would need to be ammended. Ideally, I want to utilize the fact that I am using a project library. The help for Open VI Reference states that
vi path accepts a string containing the name of the VI that you want to reference or a path to the VI that you want to reference. If you wire a name string, the string must match the full delimited name of a VI in memory on that target. If you wire a path, LabVIEW searches for a VI in memory that you previously loaded from that path on the same target.
I thought that the underlined path was my ticket and tried something like this:
but this did not work and I got
"Error 1004 occurred at Open VI Reference in MainVI.vi:
Possible reason(s):
LabVIEW: The VI is not in memory.
To load a VI into memory with the Open VI Reference function, a path must be wired for the VI Path input."
Wiring a path is not desirable as per reasoning above. Is there a way around the issue?
Thanks in advance!
Solved!
Go to Solution.

tst wrote:
That should work, but you have to pay attention to something that's stated both in the help and in the error - if you use a string, the only way for LV to know what to access is if that something is already "in memory" (sometimes also referred to as "being loaded"). In the case of standard libraries, that means the VI itself or one of its callers has to be loaded. In the case of classes and XControls, loading the library (as in having it in an open project) should be enough to also load all of its members.
Hm, thanks, I am not advanced enough to know about classes and XControls, but I will check it out. My VIs are part of a library but obviously don't get loaded because, as you said, all their calls are dynamic.
tst wrote:
What I usually do is use a static reference to a VI to get its name, because that ensures that it will be statically linked, included in executables, etc. That might not work for you if you want dynamic loading and then you will need to use some other means.
Hm, this actually gives me an idea! I could add an enable input to all these dynamically called VIs so that the logic runs only when enable is ON; otherwise the VI is called but does nothing. Then I call the VI first statically with enable=OFF just to load it in memory and then proceed with my dynamic call. A little ad-hoc, but should work and serve my purposes, I think.
Thanks!!

"Open Vi Reference" generates a Error 7

Hello,
I am getting "Error 7" from the "Open VI Reference" vi, the name of the vi is wired vi path input. The "Error 7" means that the vi cannot be found. So I went to "Tools ===> Options ===> Paths" and modified the Path so that Labview can find it. But for reasons I do not understand the vi I want to get a reference for cannot be found. So it leads me to beleive that the "Open vi Reference" does not use the path option to find a vi. Any ideas what is going on?
Regards,
Kaspar
Solved!
Go to Solution.

Hello,
Thanks for getting back to me. I have attached a file fo the screenshot of the Block diagram. The "Open Vi Reference" is in the upper left hand corner, which generates a error when I have updated the path options to point to where the file exists.
Regards,
Kaspar
Attachments:
vi_error.GIF ‏21 KB

Open VI Reference Error in the executable version only

Hello folks! I am having a strange issue since I updated to Labview 2014: I have a vi that uses "Open VI Reference" in order to programmatically open the desired vi. It worked flawless also in the compiled version (.exe) of the program until yesterday, when i compiled it again for the first time since my update to Labview 2014. It compiles with no problem, but when i start the exe and load the first vi it already gives me an error "Built Application or Shared Library (DLL): Missing".
The point is that all the VIs that i want to open are inside an LLB that is supposed to be compiled inside the .exe: infact the path that i use to open is:
D:\LabVIEW Data\builds\Sequenzer\Sequenzer2.0.exe\com_lv_sequenzer\trunk\Sequenzer_Functions.llb\Seq_Connect_to_Database.vi
And i get error number 7:
Open VI Reference in Seq_Function_Interface.vi->Sequenzer_Main_2.0.vi<APPEND>
VI Path: <b>D:\LabVIEW Data\builds\Sequenzer\Sequenzer2.0.exe\com_lv_sequenzer\trunk\Sequenzer_Functions.llb\Seq_Connect_to_Database.vi</b>
Built Application or Shared Library (DLL): Make sure all dynamically loaded VIs were properly included in the build specification for the application or shared library.
LabVIEW Real-Time: VIs built into executables cannot be accessed through VI Server calls. Use Source Distributions to dynamically call VIs on Real-Time targets.
The vi Seq_Connect_to_Database.vi is included in my built (as you can see in the attached screenshot and as it has always been).
Do you have an idea of why it is not working anymore?
Thanks a lot in advance!
Dario Cassaniti
Solved!
Go to Solution.
Attachments:
sequenzer.png ‏86 KB

OK, here is where I am confused. You talk about including the llb in the build, but in the screen shot you show a bunch of individual VIs being included. Next, in source file settings where are you telling the app builder to store all those individual VIs? Because they are VIs LabVIEW will, by default, want to put them in the executable somewhere.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Open vi reference error

Hi all,
I am using LabVIEW 2011 SP1. I am running such a vi which is calling another vi by selecting a boolean button. After opening the new vi, the previous vi will stay opened but being minimized and the new vi will stay maximized untill user forces to close the new vi. All the operations are going successful at the start. But if we keep running it for 12-13hrs, then an error is coming in open vi reference of the previous vi and the previous vi becomes maximized and above the new vi. I have attached the error message herewith. Please give me a solution.
Attachments:
error.txt ‏1 KB

Error 2 is a memory full error. If you right-click on the error cluster you can select "Explain Error". The most likely reason is that you are not closing your references properly, or you are not closing them at all. It could also be something else, such as continously building an array until you run out of memory. Without seeing some code it's impossible to say what the real cause is. If you cannot post your code then you will need to look at your code to see whether you are auto-disposing the VI references. If you are not, then you are responsible for closing them. If it's not a reference issue, then you should use the performance tools to monitor the memory usage of your VIs to see which one is causing unbounded increased memory usage.

Depot Excise Invoice with reference to Delivery from project

please understood my requirement
Normal Depo Sales is like VA01-VL01N-J1IJ----VF01 here whatever excise values captured in J1IJ those values come to the commercial Invoice.
As per My requirement we are creating Project and while creating sales order we have to assign WBS element.
now Project -Delivery--Excise Invoice J1IJ
Sales order -
Inovice VFO1
my question is how excise and commercial Invoice values come together.
regards
etr

Hello Amol,
you can create with reference of the deliveyr document. in J1iin trnsaction you have the option in the header tabs of create from delivery
enter the delivery and create the excise invocie
Hope this helps
Thanks
akasha

Reference Key3 in F-22

Similar Messages

Maybe you are looking for