Refresh cache or something else

I work on http to RFC scenario.
After a long time it works. But I don't know why? How I make it work.
so How long will it take for cache refresh?
Before that, there is only one message(http to RFC) in sxmb_moni, then I can see two records for each test: http to RFC, and RFC to HTTP.
Is it a cache problem?

Hi,
This is compltely preformace issue.
HTTP To RFC Synchronous Scenario -
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/httpToRFCSynchronousScenario-FAQs&
About Cache anf refreshing
What is Cache refreshing in XI ? Why and when we will do that ?
Regards

Similar Messages

On some pages the text from more than one paragraph stack up on top of each other, like writing something then writing something else on top of it.

On some pages the text from more than one paragraph stack up on top of each other, like writing something then writing something else over the top of it. Some pages will run text and pictures together, like a car rear-ending another or a train pile up. Other pages will cut an image or text short, i.e. it will display a portion of the top of the image or text but not the rest. This happens on Amazon for example, the section where it says "Customers who looked at this also looked at" will allow only a certain amount of the upper portion of the description immediately below the picture of the product but below that section everything is fine until I get to another section displaying more products and their descriptions and then it cuts the bottom portions off again. I've noticed this behavior mostly in the sections with product photos, the text sections seem okay. YouTube also displays this behavior. It's even doing it on this page right now. Below this box I can read "The more information you can provide the better chance your question will be answered " , but directly below that in the next sentence I can see the start of it with "Troublshootin" and the "Automatically Add" in a green field covering the "g". The next clear text is "A window will open in the top corner. Click Allow, and then click Install. If the automated way doesn't work, try these manual steps." I tried turning of pre-fetching, clearing history, cookies, and cache, scanning for malware with Avast and Windows Defender all to no avail. It began when I upgraded from dial up to DSL via AT&T Uverse. I have a Motorola NVG510 modem. The modem was replaced an hour ago along with new dedicated lines and DSL/Phone splitter from the box by an AT&T technician to make sure my incoming lines were up to par. He ran a connection test and verified everything is up to standards. IE does not display this behavior. I am running Firefox20.0.1 and all previous versions have acted the same way since I upgraded to DSL about 3 months ago.

If you have increased the minimum font size then try the default setting "none" in case the current setting is causing problems.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow websites to choose their fonts.
*Tools > Options > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"
It is better not to increase the minimum font size, but use an extension to set the default page zoom to prevent issues with text not being displayed properly.
You can use an extension to set a default font size and page zoom on web pages.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

I have a CQ60-214dx laptop. I would like to upgrade the processor in it to something else.

I have a CQ60-214dx laptop. I would like to upgrade the processor in it to something else. I have read on the Internet that it is possible to swap out the processor as long as you find the right socket, wattage, etc. processor. Is there a list out there of what is compatible with the laptop I have? I was hoping to find a processor that would take it from a dual core machine to a core2duo machine. Thanks for any info you can give me!
This question was solved.
View Solution.

Hi:
According to the specs page for your notebook it comes with a Pentium T3400 processor.
According to the service manual, link below, in Chapter 1, on page 1-1, it lists all supported processors that can be installed in your machine.
http://h10032.www1.hp.com/ctg/Manual/c02985882.pdf
That means you can go from your little ol' T3400 processor, all the way up to the mighty T9600 if you want to.
You are 100% correct about needing to know the particulars about the processor's FSB speed, L2 cache, lithography, etc.
Apparently notebook PC's have a much wider range of processors one can install. In a desktop for example, rarely do you get such latitude.
In any event, the only thing you need to check for you PC, is the BIOS release notes to see if any are required to support a faster or newer processor.
I've taken the liberty of doing that for you and note that no BIOS updates are necessary to install any of the supported Intel processors listed for you notebook.
There is one other tool I like to use and that is the Intel Processor Comparison tool.
Here is a sample of comparisons for you to review for proessors that would work in your notebook.
http://ark.intel.com/compare/35581,35568,35563,35583
I am surprised that your notebook can handle processors from 2 different code names.
I also don't like that the sockets supported are not named exactly the same. I googled the difference and it doesn't appear to matter.
However, it should have either the GM or PM 45 chipset which supports any of those Pentium processors listed in the manual.
http://ark.intel.com/products/chipsets/35509#compatibility
I believe the GL40 chipset is for celeron processors only.
So, that is basically it in a nutshell. You should be able to upgrade to any of the Pentium processors listed.
Paul

How to refresh cache in TopLink, turn off cache

How does one refresh TopLink's cache resulting from an event change? As an example, if a stored procedure is triggered by a process independent of TopLink, how do I tell TopLink to refresh its cache.
Also, how does one turn off TopLink cache altogether. Thanks.

I do not typically recommend turning the TopLink cache off all together. The cache is also key for managing object identity. If you have data that changes outside of your Java applications knowledge then there are several strategies to handling the stale data situation in the cache.
1. Make sure you setup a locking strategy so that you can prevent or at least identify when values have already changed on an object you are modifying. Typically this is done using optimistic locking. There are several options (numeric version field, timestamp version field, some or all fields). Full details available in the docs.
2. Configure that cache appropriately per class. If the data is being modified by other applications then use a weaker style of cache for the class. SoftCacheWeakIdentityMap or WeakIdentityMap will minimize how long de-referenced objects are held in the cache.
3. Force a refresh if needed. On any query a flag can be set to force the query's execution to refresh the cache. (http://otn.oracle.com/docs/products/ias/doc_library/90200doc_otn/toplink.903/tl_flapi/oracle/toplink/queryframework/ObjectLevelReadQuery.html#refreshIdentityMapResult())
4. If the application is primarily read based and the changes are all being performed by the same Java application operating in a cluster you may want to look at TopLink's cache-sync feature. Although this won't prevent stale data it should greatly minimize it.
5. One less frequently used option is to build infrastructure that can notify TopLink's cache when something changes on the database. This involves building your own call-out mechanism from a trigger into the Java application hosting the TopLink session and cache. In the Java space you can make use of the cache API to force refresh, update the object yourself, or mark it as dirty. I would discourage removing it from the cache at the object may still be in use.
I hope this explains stale-data management at a high level. More details can be found throughout the TopLink documentation.
Doug Clarke
Product Manager
Oracle9iAS TopLink

MCITP 2008 Enterprise Administrator Credential: Have they moved the retirement date of MCITP:EA to something else completely or now it's open ended ?

I've been cramming for 70-640, 70-643, 70-680, Still have to look at 70-642 and 70-647 material.
Thought I could pull this off by July 31, 2014. CramCramCram. LabLabLab. Exam. But that date seems to have vanished and the cache of the internet is no help with previously incorrect or original retirement dates still listed.
MCITP: EA, 70-643, and 70-647 do not appear to have expiration dates (the specific reqs for MCITP:EA) from the links listed on this microsoft webpage.
http://www.microsoft.com/learning/en-us/mcitp-certification.aspx
http://www.microsoft.com/learning/en-us/exam-70-647.aspx
http://www.microsoft.com/learning/en-us/exam-70-643.aspx
Have they moved the retirement date of MCITP:EA to something else completely or now it's open ended ?
(or until Server 2012 market penetration exceeds Server 2008...)

The latest information you can see in the personal
www.microsoft.com/mcp
login & select "See My Certification Planner"
https://mcp.microsoft.com/mcp/tools/CertificationsInProgress.aspx
In Progress = This is where you can see how to upgrade your certification!
What tests should you do to upgrade you further qualification (this according to the tests already do)
Active Due Now = Certifications require recertification and will become inactive on the due date.
Inactive = Your certifications are no longer active.
Active In Good Standing = Qualifications of your activity.
Tzuri Ben Ezra | My Certifications:
CompTIA A+ ,Microsoft MCP, MCTS, MCSA, MCITP
|
FaceBook: Tzuri FaceBook | vCard:
Tzuri vCard |
Microsoft ID:
Microsoft Transcript
|
Thanks.
Specifically for Windows 2008 R2 EA:
https://mycertificationplanner.one.microsoft.com/CertificateDetails/CertificateDetail/1085
I was off studying for Storage+ to fulfill an employer requirement. (Passed that). It was the cheapest option available...

What to learn? Illustrator, InDesign, or something else more appropriate?

Hello All,
I couldn't find an appropriate place to post this discussion, but I thought I would start here as I saw a similar discussion in this forum.
I have been a musician for a long time, running my own ensemble, but recently I have decided to pursue a path in arts administration, a sector in which I have moderate experience.
Still going to keep my music and ensemble going, but to bolster my resume as well as my skills to help my own ensemble, I've decided to take classes and pursue certification in web/graphic design at a local Art/Design college.
These days arts administration job postings seem to be looking for candidates that also have some digital media skills.
I'm starting off with a basic web design classes to become familiar with Dreamweaver, HTML, CSS.
This Art/Design College also offers courses in Illustrator, InDesign, and Photoshop. I will probably next take Photoshop, but wondering whether to take Illustrator or InDesign, or something else?
I think I understand what the two do, but would appreciate real world advice. I could take both, but I am wondering if I would spread myself too thin?
These arts admin jobs are probably looking for someone that can update/maintain websites, prepare images/videos/audio for websites; but also probably someone who can create simple flyers and brochures if needed. That is when I thought of InDesign. I also assume that InDesign also helps in preparation of pdf/documents for websites?
But I am also interested in Illustrator because for my ensemble, we occasionally create moderate-sized banners as stage design elements, and as lobby displays. I often hired a designer to create some new artwork, do the layout, and prepare the files for printing on a large format printer. It would be nice to have a little more control in the whole process, so I thought I might learn Illustrator, but it seems like InDesign covers some of these tasks... ??
I don't know if I am very much off the mark in the functionality of these two. Both seem very interesting, and both probably useful in both my marketability in the job market and my personal work. But I would probably feel more comfortable become very proficient in one rather than a novice in both. I would take both if many people here find good reason to do so.
Any guidance would be appreciated...

There are basically two different kinds of computer graphics: raster-based (arrays of pixels) and vector-based (stacks of mathematically-defined paths).
Web-centric work is overwhelmingly more dependent upon simple raster images.
Several technologies enable the web to deliver vector-based artwork. Websites which do that are generally more sophisticated.
Photoshop (and programs like it) is for creating/editing raster images.
Illustrator (and programs like it) is for creating/editing vector-based graphics.
( By the way, you seem to have overlooked video, which is becoming as ubiquitous a content type as the other two.)
Then, there are programs dedicated to "page assembly"; the work of combining raster artwork, vector artwork, and text into finished whole documents.
InDesign (and programs like it) is primarily for page assembly of documents destined for commercial print.
Dreamweaver is primarily for "page assembly" of web pages.
However:
Programs like InDesign and programs like Illustrator are far more similar than you'll commonly hear from conventional-wisdom. Both so-called "page layout" programs and "vector drawing" programs are what I try to explain as "object based" (not to be confused with the term 'object oriented programming', which is another thing entirely). That is, they both create documents containing stacks and arrangements of individual and independent objects. Those objects can be any combination of text objects, raster objects, and vector objects.
The difference in that regard is this:
Programs like InDesign are almost entirely geared toward assembly of moderate-to-high page-count "bookish" print documents containing long threaded text stories, and repetitive page layouts.
Programs like Illustrator are ostensibly geared toward creation of vector-based artwork. But the truth of the matter is, they are really just as much intended for (and just as frequently used for) whole page design as for standalone illustration.
The vast majority of "page layout" projects are more graphics-intensive than text-intensive, involve low-page count, and less-repetitive page-to-page design. In other words, placement ads, fliers, mailers, brochures, business cards, stationery, etc., etc. The typical freelance illustrator/designer produces far more of these types of projects in a year than the kinds of "bookish" projects which programs like InDesign expedite. And the "dirty little secret" is: It's actually more efficient to build these kinds of common whole-document design projects in a decent so-called "vector drawing" program than in a conventional-wisdom "page layout" program.
Here's The Thing:
The fact is, all of Adobe's core applications (Photoshop, Illustrator, InDesign) had their beginnings in the days of the desktop-publishing "revolution" of the mid-80s. They are all highly print-oriented. They have all gradually acquired over the intervening decades more "me, too" web-centric features. But the truth is, no one seriously uses Illustrator or InDesign for generating finished web pages. These programs are still primarily rooted in content creation for print. It's just that once you've created a graphic for print, it's a simple thing to dumb it down to re-purpose it for web.
And that's actually a good thing, because…
Here's The Other Thing:
The vast majority of commerical enterprises which buy graphics and design do not only market themselves on the web. Despite decades-old buzzword claims to the contrary, print is very, very far from "dead." And the ugly truth is, when you are creating graphics for a both print and web delivery, it makes far, far more sense to develop for print first, web second. Understand; I said graphics.
Here's The Other Other Thing:
Anyone seriously involved in computer graphics in general (whether for web or print) needs to be at least well-versed and intelligently conversant in all three functions: Raster imaging, vector graphics, and page assemby, and how they relate.
Beyond that, anyone seriously involved in print publishing also needs to be at least conversant in print-centric technicalities. Color separation. Halftoning. Process color versus spot color. Ink on paper. Color correction versus color calibration. The vast majority of print-centric content creation is done in programs like Adobe's core applications. But courses which merely teach how to use a specific graphics software, typically merely touch upon those other very important related technical subjects.
Beyond that, anyone seriously involved in web publishing also needs to be at least conversant in web-centric technologies. Nowadays, basic HTML and CSS is not enough. It's big-yawn, archaic kid-stuff. The days of the dumb, standalone web page are numbered. Nowadays there's client-side scripting (Javascript), server-side scripting (PHP), and database back-ends (SQL) and all of these are becoming ubiquitous, even for fairly modest websites.
Back To The Three Basics
So the "big three" fundamental functions (raster images, vector graphics, page assembly) are just that—fundamental. For the vast majority of basic web use, creation of raster and vector graphics is much less technically demanding than for print. They are really rather mundane, and can be done with programs far less expensive and requiring far less time to learn. There exists a plethora of raster imaging and vector drawing programs. Some good and widely-used ones can be had for free (GIMP, InkScape).
As for web page assembly, Dreamweaver is sort of "last of the dying breed" of WYSIWYG web page layout applications. These factors are at play:
As mentioned above, even modest websites nowadays need data-driven functionality. Making a page clean and attractive is just basic design principles. Meanwhile, let's face it: There's only so many arrangements within the rectangle of a web browser window that make good sense for clean, clear, intuitive, and efficient navigation.
Meanwhile, the average-joe web developer just doesn't have time to continually re-invent the drop-down menu wheel. There won't be anything special or innovative about it anyway (and even if it were, it would be more annoying to users than anything else). He's too busy figuring out the schema of delivering the content. 'I need this kind of data to be organized and accesible by this kind of visitor. I need this particular story to be editable by this particular in-house staffer, who knows nothing about HTML code. My customer needs to be able to routinely upload data refreshes, and he doesn't have time to know web code either.'
Also meanwhile, people have grown weary of continually "upgrading" their WYSIWYG web editor to get a few piecemeal proprietary features, each with its own proprietary interface and learning curve.
So the simple "practicality vaccuum" of it all has given rise to open source server-side WYSIWYG website assembly tool (Joomla, WordPress, etc.) which provide robust SQL data-driven functionality, and do it for free. These kinds of solutions are quickly supplanting the position of traditional web editors like Dreamweaver.
Bottom line:
If I were in your shoes, and really did intend to focus entirely on direction of web-centric advertising, marketing, and graphics, I really woudn't be all that concerned with specifically-Adobe apps anyway. There are scads of web developers out there who never touch a WYSIWYG web page editor. And creating a graphic in GIMP or InkScape is small-potatoes no-brainer. There's no reason to become immersed in Photoshop and Illustrator esoterica for creating individual web images; you can do it with most anything. I'd be focusing on web-centric technology and delivery schema. I'd also want to be conversant in database fundamentals.
On the other hand, if I were in your shoes and intended to focus on art direction of all aspects (web and print) of a company's advertising, marketing, graphics, and information delivery, I would consider it a necessity to be converant (maybe even working-proficient) in programs like Photoshop and Illustrator. InDesign would be somewhat less important unless the business is publishing "bookish" or "magazine-like" documents.
JET

I believe for the year I have not been using photoshop photography but something else so I never really used it or photoshop photography ..can you check for me

now that I just re-newed my photoshop photography ....I have not been using that for some reason I have been using something else. they had changed me a couple
of times last year from one thing to another ...so I never go photoshop photography downloaded. I used the other one very little because I wasn't sure I should...gee
I hope that makes sense.
I need to download photoshop photography.
Sherri nicholas

You need to get the owner's manual for your Ford's bluetooth system to see how to put your system into discovery mode for the iPhone as well as the appropriate steps to take.
In addition, you should see if the iPhone is supported.

Downloading a file would bring up an option to open the file or save it - for some reason now it just downloads straight to the download folder. Why? Problem with Firefox or something else?

Downloading a file would normally bring up an option to open the file with the appropriate program or save it - for some reason now it just downloads straight to the download folder. Why? Problem with Firefox or something else? It's very frustrating - sometimes you want the file opened first so it can be discarded or saved to a different location.

Hey. that's great! Thanks for posting back with the outcome.

My mom put my ipod 5th gen in the house somewhere and it was turned off. It is connected to the internet in the house. How do i turn it on with the Findmyiphone or something else? It was an expensive gift and we can't find it now! Please help!

My mom put my ipod 5th gen in the house somewhere and it was turned off. It is connected to the internet in the house. How do i turn it on with the Findmyiphone or something else? It was an expensive gift and we can't find it now! Please help! How do i turn it on without finding it because she can't remember where it was.

That is so dumb...Apple is the best and most techinological company IN THE WORLD and they don't have the time to invent something like that? HUH? All they are worried about is making the "Worlds best Phone" and they can't take the time out to help their users or anybody that has their products. All they have is "Find mt Iphone" Well they should step up and do something else to help people like me out. Find a way to turn it on and you can find it or find a way to turn it on remotely.
Thank you for your replys

How does Azure Compute Emulator (or the Azure one) determine if a role is web project or something else ("The Web Role in question doesn't seem to be a web application type project")?

I'm not sure if this is F# specific or something else, but what could cause the following error message when trying to debug locally an Azure cloud service:
The Web Role in question doesn't seem to be a web application type project.
I added an empty F# web api Project to a solution (which adds Global.asax etc., I added an OWIN startup class Startup etc.) and then from an existing
cloud service project I picked Roles and
chose Add
-> Web Role Project in solution, which finds the F# web project (its project type guids are 349C5851-65DF-11DA-9384-00065B846F21 and F2A71F9B-5D33-465A-A702-920D77279786),
of which the first one seem to be exactly the GUID that defines a web application type.
However, when I try to start the cloud project locally, I get the aforementioned error message. I have a C# Web Role project that will start when I remove the F# project. I also have F# worker
role projects that start with the C# web role project if I remove this F# web role project. If I set the F# web project as a startup project,
it starts and runs as one would expect, normally.
Now, it makes me wonder if this is something with F# or could this error message appears in C# too, but I didn't find anything on Google. What kind of checks are there when starting the emulator and which one needs
failing to prompt the aforementioned message? Can anyone shed light into this?
Sudet ulvovat -- karavaani kulkee

Sudet,
Yeah you are right, the GUID mentioned seems to be correct and the first one i.e. {349C5851-65DF-11DA-9384-00065B846F21} means the web application project which compute emulator uses to determine while spawning up role instances.
You might want to compare the csproj of your C# and F# web projects which might give some pointers.
Are you able to run your F# web project locally in IIS? If yes then you will definitely be able to run it on azure so I will recommend to test it in IIS Express first.
Here are some other tips which you can refer or see If you are yet to do those settings
1. Turn on the IIS Express - You can do it by navigating to project properties
2. Install Dependent ASP.NET NuGets / Web Api dependencies (If there are any missing), Reference System.Web assembly
Also I will suggest to refer this nice article about how to create a F# web Api project
http://blog.ploeh.dk/2013/08/23/how-to-create-a-pure-f-aspnet-web-api-project/
Hope this helps you.
Bhushan | http://www.passionatetechie.blogspot.com | http://twitter.com/BhushanGawale

I just got iphone 5c and i am not happy with it. It uses to much data and i don't even know how. I can't get the ringtones i want for my contacts.I got it on my free upgrade but i want to take it back and get something else but where i got it they say i c

I just got iphone 5c and i am not happy with it. It uses to much data and i don't even know how. I can't get the ringtones i want for my contacts.I got it on my free upgrade but i want to take it back and get something else but where i got it they say i can't because i don't have the earbuds and i have serches or them. now i am suck with a phone i don't like at all until my next upgrade. this is very dishearten

1. If you are this unhappy with that phone, and the lost earbuds is the only thing stopping you from taking it back, why do not just buy some earbuds. That way you can get rid of that phone. It all depend upon how much you want to get rid of that phone.
2. Yet if you are stuck with that iPhone, here is something might help you to control the data usage. By design, iPhones do turn off WiFi when they go dormant. So if a download is in progress and so forth when the phone goes dormant, it will switch to use cellular data, if this setting is left on. Therefore, from multi-sources I have learned that if you keep your iPhone connected to a power source, then it will stay connected to the available WiFi.

The only thing I did was get down to 5GB HDD space, had a half-import, & something else

By that I mean here's what I got:
Both Libraries are the same path....
As in the title, I was/am running out of HDD drive space, I recently (and last time) had my last iPhone (IOS 7.*.*) iPhoto import go snafu (for first time between this MBP and 3 other iphones....ever), and I think I did something else like at the least a CHECKSUM or VERIFIED or REPAIRED permissions which seemed to make some other stuff squirlley.
Anyway, I have a mid-late 2010 (OCT) 7,1 MacBook Pro 2.4 GHz Intel Core 2 Duo running Mac OS X Version 10.7.5 with 8 GM 1067 MHz DDR3 RAM and a 250GB 2.5" startup disk
*******I have a 1TB SSD/HDD here waiting to replace my boot drive, with the adapter kit from OWC and all, but want to back up all my stuf and make it reduntant a few times first. Problem is I have 1000 great photos since our snowfall here in the NE and don't to lose them and the ones of my daughter and baby daughter.
Any help is much appreciated.
Best Regards,
GJ

Sorry but I do not even know what your question is
as a side note you must always have a minimum of 10GB of free space on your hard drive and more is better
If your photos are on your iphone then backup to iCloud in case of issues
I you could post a simple question with only the revelant context it would be good
LN

Black macbook: not sure if its the fan, or something else (noise)

I got this macbook is september. I had no issues with it, when suddenly it began making noises. Now, I'm a gadget-blog reader, so I've been aware of Macbooks making the "moooo" sound from the fan; however, I'm not sure if my noise is the fan or something else. I get more of a "whrrrrrrrrrrrrrrrr" noise.
1) I have the macbook plugged in
2) I leave it on all the time
3) It began to hear the "whrrrrrrrrrrrrrrrrr" when:
a) activate visualizer in iTUNES
b) download shows off iTUNES
c) have a bunch of windows open and the 512MB Memory is struggling to access each window, if I say, I want to close them.
Considering this is the uncrashable, flexible, awesome OSX, and should be pesk-free, like say WINXP...I would expect such problems to not exist on the glossy OSX.
I'm currently studying abroad in the United Kingdom. I bought this macbook in San Francisco just before I left. I have plenty of warranty left. Is this a big issue? It annoys the **** out of me. None of the macbooks demoed in the store had this problem. So in a way, this is false advertising, since I'm reading that a lot of people have this noise issue.
I've fully updated my firmwares with software updater, but I still get the noise. So I'm at situation that needs some outside help as to what I should do.
Thanks.

hard to say if it is serious or not. have you tried resetting the pmu? http://docs.info.apple.com/article.html?artnum=303319 that could very well help the matter.

I bought an Apple TV but my HDTV has only one HDMI outlet. What do I need to operate the Apple TV and my Uverse wireless network. I bought a four outlet hub at Best Buy but I can't't figure it out. Do I need something else?

I bought an apple TV but my TV has only oine HDMI outlet, so I have to unplug it when I want to watch regular TV. I bought a four plug hub at Bestbuy but can't get it to work.
Is there something else I can use?

hdmi spillers and switches are hit or miss some work some don't

How can I do mirroring of a screen from new iPad to hdtv using apple tv and still work on something else in my ipad

How can I do mirroring of a screen from new iPad to hdtv using apple tv and still work on something else in my ipad

You don't. Mirroring is duplicating your ipad screen on another projector - so you can't have another app going on your iPad without it also showing up on the projected image. Some apps are designed so that you see a different image in the iPad than the mirrored out display, but even then you're within the app itself.

Refresh cache or something else

Similar Messages

Maybe you are looking for