Reg: Adding Country Group 99 for Infotype 9
Hello Guru's,
Can anyone help me with adding a New Country to Infotype 0009 (Bank Details).
1. In Component FPM_OVP_COMPONENT - Application HRESS_A_PERSINFO - Created a Application Configuration(AC)
2. Started the AC and gave Component Configuration(CC) to go to the applications for Bank Details
3. Go to Edit Page - Bank Details edited the Wire Schema for HRESS_CC_PER_DTL_BANK_XX to use Custom Config id created for FPM_FORM_UIBB and FPM_LIST_UIBB
4. In the General Settings - Floorplan Settings - Application Controller Settings - Changed the Configuration Name to Z configuration name which was created for Component HRESS_C_PERSINFO_CONFIG
5. Component HRESS_C_PERSINFO_CONFIG is used to link the custom Component Configuration created where the masking is done.
Created 2 Component Configuration for FPM_FORM_UIBB for US and UK and within the Component Configuration created for HRESS_C_PERSINFO_CONFIG replaced to open the link for US and UK.
6. Component Config for HRESS_C_PERSINFO_CONFIG is missing the configuration for Country Grouping 99, so created an entry for Other Countries and assigned the US Component Configuration to open.
Note 2035081 - How to add a custom infotype to ESS 'Personal Profile' in WD ABAP
I couldn't find any document or note to add a country to Infotype.
Please help me.
Thanks,
Pramod
Hi Siddharth Rajora,
When using GENIL_MODEL_EDITOR to add the Dependent Object and activating the changes, it is giving error on other Dependent Objects which are not been touched.
Below is the error I am getting when saving the entry.
Let me know if there is anything else I am missing.
Thanks,
Pramod
Similar Messages
-
Change Country grouping for International countries
Hi Experts,
Can you please help me with the information that I need for one of my implementation.
My client wants to change the country grouping for say one country DENMARK. The company codes belonging to DENMARK are currently tagged to international country grouping (99).
What are the various things, that I need to change. I need to prepare a detailed check list for the same, so that I won't miss anything while changing the country grouping.
Thanks & Regards, Swapnil Mishrahi
Go thru the payroll node , i cannot give you each customizing table , but check for all the tables where the country grouping is there.
This will not be just small change , you will have to do the entire config. for the new country code.
Regards
sameer -
Incorrect country grouping 40 (country grouping for run: 99)
Hi All
i was getting following error while posting in prod. this is my first posting doc in prod: -
Incorrect country grouping 40 (country grouping for run: 99)
guide what are all i need to check.
regardsHello
please have the following checked in your system
SE16
Table PA0001
-> Select the relevant Payroll Area then take all the values in P0001-WERKS.
-> Go with this values to table T001P and check if the MOLGA is always the right one.
For some reason there is in the payroll area selected for posting an employee that has a personnel area (P0001-WERKS) which country grouping (MOLGA) is 40 instead on 99. Please go to trx SE16 -> table PA0001 -> select the relevant Payroll Area then take al the values in P0001-WERKS.Finally go with this values to table T001P and check MOLGAS are always 99.
Regards
Ramana -
Modification groups for infotypes
Hi All,
Could anyone please explain me the concept of modification groups in the contest of standard infotype screen fields in plain words? Is there any limit to the number of values that can be assigned to a particular modification group?Hi vijay,
1. The modification group fields (4)
which are avaialble in infotype screens,
are actually available in all kind of screens.
2. The purpose of them is to :
a) group similar related fields
b) so that at the same time,
(at the same time means, in a loop)
(other wise we have to give code for each field, one by one)
c) they can be in EDIT MODE, Display MODE
d) or INVISIBLE mode
e) we can use the combination of 4 modification group fields
f) for our any permutation/combination requirement.
regards,
amit m. -
Adding redolog group for a database which has standby
hi friends,
Database: 10.2.0.3
OS: windows 2003 server sp2
i had a database (which has a standby) with the following redolog information
SQL> select group#,member from v$logfile;
GROUP# MEMBER
3 I:\D001\ORACLE\ORADATA\INFA05UT\REDO03.LOG
2 I:\D001\ORACLE\ORADATA\INFA05UT\REDO02.LOG
1 I:\D001\ORACLE\ORADATA\INFA05UT\REDO01.LOG
4 I:\D001\ORACLE\ORADATA\INFA05UT\SBREDO01.LOG
5 I:\D001\ORACLE\ORADATA\INFA05UT\SBREDO02.LOG
6 I:\D001\ORACLE\ORADATA\INFA05UT\SBREDO03.LOG
by name SBREDO01.LOG i hope this is standby redo log file.
the following is the output from v$standby_log view.
SQL> select group#,status from v$standby_log;
GROUP# STATUS
4 UNASSIGNED
5 UNASSIGNED
6 UNASSIGNED
the following is in standby database
SQL> select * from v$log;
GROUP# THREAD# SEQUENCE# BYTES MEMBERS ARC STATUS
FIRST_CHANGE# FIRST_TIME
1 1 8319 52428800 1 YES CLEARING_CURRENT
99953082 05-JAN-09
3 1 8318 52428800 1 YES CLEARING
99947833 05-JAN-09
2 1 8317 52428800 1 YES CLEARING
99941239 05-JAN-09
will standby redo log file shown in primary? now i want to add a redolog group to primary. how can i do this? plz explain
thanks in advanceHi,
AFAIK, You can add redo log file groups or members to the primary database without affecting the standby database and Enabling and disabling threads at the primary database has no effect on the standby database.
Example :-
ALTER DATABASE
ADD LOGFILE GROUP 15 ('/oracle/dbs/log1d.rdo', '/oracle/dbs/log2d.rdo')
SIZE 500K;
The Standy performance only effects when you the Primary Failovers and standy DB had less Redo Logs, In that case the performance degrades. I suggest try to maintain Equal numbers of Online Redo Members on Both.
- Pavan Kumar N -
Personal Data and Address for Country Grouping 99 - error on ESS
Hello All,
I have configured personal data and address infotypes in ESS for the country grouping 99.
I have done the following config
1. Assign Screen Structure to Infotype Versions
2. Define Active Subtypes and Use Case
3. Define Country-Specific Applications
4. Created a Z service and then assigned this service to subarea.
I made use of US service and copied to z.
after the config when i log on to the portal and check the personal data or address links am getting the error:
An exception occurred that was not caught., error key: RFC_ERROR_SYSTEM_FAILURE
the st22 dump is
Runtime Errors OBJECTS_OBJREF_NOT_ASSIGNED_NO
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "HRXSS_PER_CLEANUP" "(FUNCTION)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component.
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
I searched in the forum but still am unable to figure it out where i am wrong or missing any config or any other technical error.
Can any one pls help mehttp://wiki.sdn.sap.com/wiki/display/ERPHCM/HowtoReuseCountryspecificapplicationsforMolga99
check the steps in above link
and also please check with some standard country like india 40 or usa 10 what use cases and time constraints have been set
INFTY - Now specifies the infotype.
USECASE - Corresponds to the value in the table V_T7XSSPERSUBTYP.
ZEITB - Corresponds to the value in the table V_T591A (V_T582A).
Page 2
SUBTYPE_TAB - Here, you will find a list of the subtypes that have
already been checked and that are correct.
You then find the subtype in METADATA-SUBTY. However, you must move up
one subroutine in the call hierarchy in advance to do this.
This data makes it easy for you to identify the infotype and the subtype
and correct the inconsistency by making entries in the tables mentioned.
ie
T_cd:SE24 >>CL_HRPA_PERNR_INFTY_XSS >> CHECK_USECASE_WITH_CONSTRAINT >>
for
usecase = A1, A4, B1, B4 (table V_T7XSSPERSUBTYP)
you need to have
zeitb = '1' OR zeitb = '2' (table V_T591A)
for
usecase = A2, A3, A5, B2, B3, B5
you need to have
zeitb = '2'
for
usecase = A6, B3
you need to have
Zeitb = '3' -
No Assignment of Payroll Data to BW Month for Country Grouping 10 and 13
Hi Gurus,
I get the error "No Assignment of Payroll Data to BW Month for Country Grouping 10 and 13" when extracting data for 0PY_C02. I then added the "End Date of For Period" in the SBIW in the Payroll systen activity "Assignment of Payroll Data to BW Month". I am still getting the same error???
Also I do have data in the cube from that extraction, but when I run a query I get no data?? Is this due to the above error?
Thanks,
GarthHi,
The extractor runs without errors in RSA3 in the source system. The error is red with the test of "No Assignment of Payroll Data to BW Month for Country Grouping 10 and 13". I completed the SBIW task to set this in the source system but I still get the same error?
Any other ideas?
Thanks,
Garth -
ESS/MSS for International Country grouping
Hi all,
Scenario: We are implementing Portal ESS/MSS on ECC6 and have loaded the Best Practices with the below components.
SAP NetWeaver Portal 7.0 SP12 with the following additional software components
BP ERP05 Common Parts 1.0 SP08 (BP_ERP5COM)
BP ERP05 ESS 1.0 SP08 (BP_ERP5ESS))
BP ERP05 MSS 1.0 SP08 (BP_ERP5MSS)
SAP ESS 600 SP08 (SAP_ESS)
SAP MSS 600 SP08 (SAP_MSS)
SAP PCUI_GP 600 SP08 (SAPPCUI_GP)
Now, the ESS and MSS is to be implemented for a Country Grouping 99 - International and not any specific country.
Problem: The iViews are not loading for International, when the R/3 config setting is for 99. While it seems to be calling the right iViews for 10 - USA or 12 - Belgium.
Can you please assist on how to link up the Users to the roles and correct iViews.
Thank you.
SandeepHi Anil,
Steps in brief:
0. Once you have implemented the Busin. Packages from SAP you will get all the Portal Content which is country specific. This is the same content being called from R/3 using country specific resources.
1. Go to R/3 -> Pers Admin -> ESS -> General Settings -> Home Page for SS -> Services -> Define Country Srvcs.
Go into Define Country specific srvcs and you will see the view V_T7XSSSERSRVCG
2. This table contains all the country specific implementations offerred by SAP. You can use some of these and copy/create for CGrpng 99 as below. This should be based on what services you want to use on ESS.
EMPLOYEE_PERSINFO_ADDRESS 99 EMPLOYEE_ADDRESS_BE_SERVICE
EMPLOYEE_PERSINFO_ADDRESS05 99 EMPLOYEE_ADDRESS_BE_SERVICE05
EMPLOYEE_PERSINFO_BANK 99 EMPLOYEE_BANK_BE_SERVICE
EMPLOYEE_PERSINFO_BANK05 99 EMPLOYEE_BANK_BE_SERVICE05
EMPLOYEE_PERSINFO_FAMMEMBER 99 EMPLOYEE_FAMMEMBER_BE_SERVICE
EMPLOYEE_PERSINFO_FAMMEMBER05 99 EMPLOYEE_FAMMEMBER_BE_SERVICE05
3. Also make sure your CGrpng in Pers Area/ PSA is set to 99, basically Employee shold belong to 99.
Hope this helps in figuring out a few more things !!
Good luck
~ Sandeep -
Problem with HRFORM for country grouping 40.
Hello Everybody,
I have created HR Form ZSAP_PAYSLIP_IN for India (Country Grouping = 40 ) copied from standard HR form SAP_PAYSLIP (for Country Grouping 99). The DDIC structure /1PYXXFO/ZSAP_PAYSLIP_IN and the smartform ZPYXXFO_ZSAP_PAYSLIP_IN are generated succefully and both are activated. But while trying to generate the HR form I am getting the following error "Generated print program contains a syntax error". In the program /1PYXXFO/ZSAP_PAYSLIP_IN_PRNT its giving error in this line
NODES: PAYROLL TYPE PAYIN_RESULT.
Please help.
Thanks in advance.
DebasisThat's my guess, as it worked for me:
It doesn't compile, because there's a bug in the structure of the PNP logical database.
Payroll result structure specific to your country is not listed as a 'possible type' for LDB node 'Payroll'.
You can correct it easily in tracaction SE36. Choose PNP, tab: 'Structure'.
Double-click on 'PAYROLL'. Click on 'Possible types'.
Add country-specific structure (PAYIN_RESULT).
Tell me what happened
PS. Be aware that this is a modification to the system and you need a key for this object.
Message was edited by: Jacek Wojciechowski -
Wagetypes used in Travel Management for Country grouping 40 (India)
Dear Consultants,
May I know which model wagetypes are to be used for Travel management for country grouping 40 (India). For Country Grouping 10 (US) we have MJ10 to MJ95. I created some wagetypes & set their characteristics similar to those in MJ10 to M95 but it does not work well.
Is there any simple process to go from Wagetypes > symbolic accounts > GL Accounts.
Regards,
BindumadhavThat's my guess, as it worked for me:
It doesn't compile, because there's a bug in the structure of the PNP logical database.
Payroll result structure specific to your country is not listed as a 'possible type' for LDB node 'Payroll'.
You can correct it easily in tracaction SE36. Choose PNP, tab: 'Structure'.
Double-click on 'PAYROLL'. Click on 'Possible types'.
Add country-specific structure (PAYIN_RESULT).
Tell me what happened
PS. Be aware that this is a modification to the system and you need a key for this object.
Message was edited by: Jacek Wojciechowski -
Hi
I am currently adding a chart for each group on group footer in a table.
but i want that charts to be on the right side of the group data.
regards
Pratap M:)Hi PratapM,
If I understand correctly, you have already added a chart in group footer, and you want to display the chart on the right side of the cell. If I have misunderstood, please don't hesitate to let me know.
Based on my research, if we directly add a chart into a cell, the chart will fill all of the space in the cell. So in order to achieve your requirement, we can insert this chart into a rectangle, then add the rectangle to the group footer. If we want to
display the chart on the right side, we can directly drag the chat to the right of the rectangle.
If there are any misunderstanding, please elaborate the issue for further investigation.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
'No assignment of payroll data to BW month for country grouping 99'
hi gurus,
i am getting the error 'No assignment of payroll data to BW month for country grouping 99'
to solve this i went to
SBIW>Settings for Application-Specific DataSources (PI)->Human Resources->Payroll Plug-In>Assignment of Payroll Data to BW Month
i am choosing country 99 and here i get 4 options which should i choose.
1.payment date of for- period
2.end date of in -period
3payment dare of for -period
4payment dare of in- period
regards
manHi,
As per the settings in the SBIW code in R/3 , we can go with a single Time based assignment for a Country at a time.So we can not use both IN Period and FOR period for the same country code.
For more information, refer the below path.
SBIW>Settings for Application-Specific DataSources (PI)->Human Resources->Payroll Plug-In>Assignment of Payroll Data to BW Month
Under human resources.....go to payroll and assignment of payroll data to BW
if you do not get...use Cntl + F and enter payroll..
you will get
in Assignment of payroll data to BW Month, after giving country grouping, what type of period assignment should be given. in R/3 dev side when i have chosen
1.End of For period, extracted 972 records
2. End of In period, extracted 1023 records
3. Payment date of For period, extracted 972 records(just the same as in the first option)
4.Payment date of In period, extracted 0 records
Do u know more about these options??? one more thing to clarify on this. While doing payroll data extraction, do we have consider or say give "Define time frame for transfer", if that is compulsory then i have done that by givigng
Earliest date as 01.01.2005
Latest date as 31.12.2005
but in the info package selection i have given to extract 01.01.2005 to 28.02.2006 and it has extracted successfully even 2006 records which means that though we define time frame, extraction is independent of this time frame, am i correct???
Hareesh -
Account group for an Indian company- Reg
i have to configure account group for an Indian company
how i configure account groups please suggest
name for the account groups
i dont have idea to confiure the how many account groups
Email id [email protected]
regards
dharmendrarUh. Contact Apple. If you're a dev, then go to the dev site or call. I don't think anyone would have the information your looking for here, since this is something that deal directly with the store and setting this thing up.
-
Adding responsibility objects for the Notification Groups for a PA
Hi Gurus,
I am supposed to add responsibility objects for the notiifcation groups for a PA.. Could you please confirm the steps I am planning to follow
1. Find out the Workflow
2. Add the responsibilities objects ( Where can Add those ( in the workflow or in Org Management?)
3. Edit the rule to point to that PA..
I am new to workflows ..points are assured for the helpJust write your own composite Icon class:
public class CompositeIcon implements Icon
private Icon icon1;
private Icon icon2;
public CompositeIcon(Icon icon1, Icon icon2)
this.icon1 = icon1;
this.icon2 = icon2;
public int getIconHeight()
return Math.max(icon1.getIconHeight(), icon2.getIconHeight());
public int getIconWidth()
return icon1.getIconWidth() + icon2.getIconWidth();
public void paintIcon(Component c, Graphics g, int x, int y)
icon1.paintIcon(c, g, x, y);
icon2.paintIcon(c, g, x + icon1.getIconWidth, y);
}Hopefully a slightly more reusable solution. You could write all sorts of different layouts in this way.
Hope this helps. -
Adding a field in infotype 0009
Hi,
I have a requirement where in i have to add a filed in the infotype 0009.
For this i have added the field in the structure ps0009 through append structure. But i have to get the filed in the sceen. Please let me know how to do this.
I have gone to PM01 transaction and for infotype 0009 went into module pool option button and clicked on create screen then its asking for the access key as this is the standard infotype. But i dont know how many screens are related to this infotype as the access key for all the screens is different. I took access for 2 screens but not sure how many screens are there.
Please advice how to proceed.
Thanks,
RajuHi raja,
1. The screen numbers starting with 2
are the ones which will show the data for entry purpose.
2. So while doing pa30, check the exact screen number,
which comes in your case (this is country dependent / customizing dependent)
3. Then accordingly u can enhance those screen.
regards,
amit m.
Maybe you are looking for
-
Sorting Albums in a Playlist by Title???
Hello, I created a Smart Playlist and when I change the grid view, the albums sort by Artist only and I cannot figure out how make them sort by Album Title. Can anybody help? Cheers
-
Feedback:Error when trying to save a site
I'm new to Muse and yesterday I tried saving a new site I'd created (I'd actually created two and had them both open at the same time if that matters?) Anyway when it came to save them it told me that I could not as the file was either open somewhere
-
CD/DVD drive does not work after Win 8 intsallation
from a month i've updated my windows into windows 8, everything is working great but the DVD-RW . When i put empty cd and try to open it, it gives me error while opening saying: "windows was unable to complete the format" So is that a software or a h
-
Dreamweaver CS on Vista Pro, everything has worked fine for the last 5 months I have been able to ftp to all my sites. Then last week I started getting the following when I tried to connect to my sites: quote: Operation timed out...canceled...An FTP
-
Hello, sorry for my english, I'm french, and I need help: My Blackberry has decided yesterday to stop. I turn it on, and all the apps were messy, not in order. More, the blackberry hub was loading and loading, and it never ends... It stills load now,