Reg errors in webdynpro runtime

hi every im new to this webdynrpo n this is my first post
my problem when im tying to run the Code Samples in SDN and some Weblogs n SDN Best Practices im getting the following errors. So please guide me what steps to be taken to run the following application.
on my stand along im having WEBAS n NetweaverStudio
WebDynpro_OVS_Valuehelp
com.sap.tc.webdynpro.services.exceptions.WDTypeNotFoundException: type com.sap.tc.webdynpro.demo.ovs.adrfcmodel.types.S_Date could not be loaded: com.sap.dictionary.runtime.DdException:
TutWD_UploadDownloadInteractiveForm
Application error occurs during processing the request.
Details: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to create deployable object 'local/TutWD_UploadDownloadInteractiveForm' since it is not of a Web Dynpro object.
TutWD_PdfObject
Application error occurs during processing the request.
Details: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to start the deployable object 'local/TutWD_PdfObject'.
TutWD_OnlineInteractiveForm
com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Service call exception; nested exception is:
     com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (404) Not Found.
TutWD_DynamicForm
com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Service call exception; nested exception is:
     com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (404) Not Found.
TutWD_EmailInteractiveFormApp
Sending failed; nested exception is: com.sap.engine.services.javamail.exception.JavaMailMessagingException: Cannot send message to host your.smtp host:25 using the SMTP protocol.
Using Weblog
"WebDynpro_SMS"
     java.lang.Error: Unresolved compilation problem:
          Request_SendSMSHttpPost_sendSMSToIndia cannot be resolved or is not a type
SDN Community
BestPractices_AccessGoogle
Service call exception; nested exception is: java.net.UnknownHostException: proxy
No search results found for null

Hi,
For the first error do check your JCO connections.Refer the following links for further assistance.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/webdynpro/how to configure the jco destination settings.pdf
How to configure my sld server to make a JCO destination work.
For the remaining errors I believe that Adobe document services(ADS) is not installed in your server.Do check the following weblog on how to install ADS and configure the same.
/people/achim.hauck/blog/2005/02/04/my-struggles-with-the-adobe-document-services-in-was640
Regards,
Vijith

Similar Messages

Reg: Error in webdynpro

Hi All,
I am getting the following error in webdypro.Can you explain me the reason for this error. I am attaching the code which is giving the error.
wdThis.wdFirePlugTo_Individual();
wdThis.wdGetIndividual_Interface().initialise();
Can you help me out?
This is the error
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Given name does neither identify the interface controller nor the configuration controller.
    at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.eventSourceIsInterfaceController(ComponentUsage.java:726)
    at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.subscribeToEvent(ComponentUsage.java:232)
    at com.sap.tc.webdynpro.progmodel.controller.Component.subscribeToEvent(Component.java:692)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.subscribeSelfToEvent(DelegatingComponent.java:149)
    at com.change.app.wdp.InternalChangeAppComp.wdDoInit(InternalChangeAppComp.java:362)
Thanks in Advance.

Hi Bharath,
                What does <b>Individual_Interface</b> refer to? If the reference missing it shows error in the code itself and build fails. If you are sure the usage is not missing then repair and rebuild the project. If still error persists, give more details like what are the components you are using, exactly where this error is occurring and what are you doing?
regards,
Siva

Error in WebDynPro Iview in portal.

Hello All,
I have to create WebDynPro ABAB Iview to display the Application created in the same.
I have followed this Blog
Creating WD-ABAP iView and the WD Namespace
and steps taken are.
1) Created System with R/3 Credentials and System is Up and running.
System Name:: CoP
System_Aliase:: CoP_Aliase
2) Now i have created one WebDynPro Iview and on the Application Parameter Page which is in the wizard of Iview creation i have done thease entries.
System:: Cop_Aliase
Namespace:: sap
Application Name ZRAH_TUTORIAL2
and created Iview now When i see Preview of this Iview am getting this Error.
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Application URL ':///sap/bc/webdynpro/sap/ZRAH_TUTORIAL2/;sap-ext-sid=CiOljEJTkrTNS5ZSeEZtwA%3D%3DY3EU8GM3SofqGxk%2B6%2BWHWg%3D%3D' is not valid! Please check the protocol and host entries for system 'CoP_Aliase'..
See the details for the exception ID in the log file
What can be the cause of it and how can i get rid of it.
Any help will be highly Appretiated and will be rewarded for sure.
Thanks and Regards.
Vinit

Hi Vinit,
It seems that there should have been issue with the connection from portal to your ECC system.
Can you please close the thread and also post the solution so that it is useful for others.
Regards
Mukesh

Sub node does not exist error in webdynpro.

Hello Experts,
I have Faced following Run time Error in Webdynpro.
"Subnode ZALV21.ALV_TABLE does not exist "
I done External Mapping Neatly In controller Usage.Even Though I faced this Runtime Error.
Kindly Reply me ASAP.
Regards,
Ameya Karadkhedkar

Hi,
Is component controller of your component is active? It seems that the node ALV_TABLE is not being activated. Hence the instance of it not found during run time.
Regards,
Rama

Error: The Java Runtime in use does not contain a suitable JAXP feature

Hi,
I'm trying to get Eclipse TPTP to work. One of the steps I need to execute is to run a setConfig.bat file. When I ran it, I got the following error:
ERROR: The Java Runtime in use does not contain a suitable JAXP feature
RESOLUTION: Use a JRE which supports the JAXP featureI use Eclipse Europa, and it is using my JDK (actually JRE) 1.6.0_05. That should mean I have JAXP in my JRE (which is confirmed when I search on JAXP from the directory C:\Program Files\Java containing jdk1.6.5_05 and jre1.6.5_05 directories).
Is there something extra I need to do to let Eclipse and TPTP find my JAXP classes?
TIA,
Abel

Hi,
Even i am getting the same error but i use JRE 1.5.0_14. please let me know if you happen to resolve this.
Thanks in Advance,
Sai

Java Plug in fatel Error The java Runtime Environment cannot be loaded from

Java Plug in fatel Error The java Runtime Environment cannot be loaded from <\bin\server\jvm.dll>
files are left behind when you uninstall Java from Windows XP.
Directory of C:\Documents and Settings\user1\.java
10/14/2004 06:02 PM <DIR> .
10/14/2004 06:02 PM <DIR> ..
03/07/2005 07:10 PM 32 jpicerts130_02
09/19/2004 04:37 PM 32 jpicerts141_02
09/19/2004 04:37 PM 32 jpihttpscerts141_02
03/07/2005 07:10 PM 549 properties130_02
09/19/2004 04:37 PM 383 properties141_02
5 File(s) 1,028 bytes

How do i fix it

Error logging into runtime user

My coworker recently added a new windows agent that is on a different domain than her Tidal master and is getting the error
*** Error logging into runtime user when she tries to run a job through Tidal.
She verified that the runtime user has the proper rights on the agent server, she logged onto the agent as the runtime user and ran the script from the job manually and it ran successfully.
Is there a known problem with using a runtime user that was created in domainA but trying to run a job on an agent server in domainB?
Thanks

It turns out that the problem was with the userid the agent service was running under. She changed the service to run with the Local System credentials and the problem was solved.

I am trying to install the latest itunes software to my computer. After installing I keep receiving the error messages. Runtime error. Please help

Hello
I am trying to install the latest itunes software to my computer. After installing I keep receiving the error messages. Runtime error.
Please see the screen capture of the error messages.
Please help, Thank you
Ab Majid

See Troubleshooting issues with iTunes for Windows updates.
tt2

Print action in WebDynpro runtime (Visual Composer)

I have added in toolbar for the table the button and as action have specified system action "Print". But in WebDynpro runtime it does not work unlike Flash (there is no pop-up window with a choice of printers). How to solve this issue?

Jax,
I don't think it's possible to directly print from within WD and call the printer dialog box per my understanding.
But a workaround is achievable:-
1. Create an Iframe element in a new view and embed an html page containing the print JavaScript i.e window.print();
2. When you select the Print button, on its action handler navigate to other view containing the Iframe where the script will get executed and it should probably open a pop-up.
Note: WD does NOT support JavaScript or client side eventing.
Chintan

Time out error in webdynpro

Hi all,
We are facing a time out error uisng webdynpro.
The webdynpro application is mapped to the enterprise portal for the users.
When ever the users loads the application and first click on the link then again loads the application and click any link(as clicked previously) then the application returs time out error.
I am little confused as not known the error is a portal one or webdynpro error.
Requesting experts for a say on this.
thanks

Hi,
You can try this...
Re: TimeOut
Cheers,
Kris.

WebDynpro runtime mode in Visual Composer

We are unable to create and deploy Visual Composer projects with WebDynpro runtime mode due to we unable to see any datasource of systems in "Find Data Service" area.
In the same time when we use Flex runtime mode BAPIs in "Find Data Service" apears.

Sorry, I mean WebDynpro runtime in Visual Composer
I've found the solution.
WebDynpro only supports Webservices as datasource.
See also note 950492
RFCs
However, if you uncheck mask unsupported features under Tools -> Options, and then deploy, BAPIs will also work to a certain extent.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/vc/flashvs.WebDynpro

Unexpected error compiling the runtime metadata for Split-Join.

Hi Everyone,
We are getting below error while restarting the managed servers on Weblogic. We are having 6 managed servers in our cluster. In one of the application in OSB10.3, we are using SplitJoin to call third party webservices. The application is getting deployed properly, and sometimes on one of the managed nodes, we are seeing below error during startup. The servers are coming into Running mode as per the console, but in logs we are seeing the error. No services are accessible on that particular managed node. We have to restart the server and by luck, it will come up properly. This is inconsistent behaviour from the managed servers. Below is the stack trace from stdout files. Any help would be greatly appreciated...
<Jan 24, 2012 5:49:34 PM CST> <Error> <OSB FLOW Kernel> <BEA-2031003> <Split-Join deployment error during load notification: Unexpected error compiling the runtime metadata for Split-Join: "FISRecXferInqServiceV2_0/SplitJoin/RecXferInqSJ".
com.bea.bpel.compiler.CompilerException: Unexpected error compiling the runtime metadata for Split-Join: "FISRecXferInqServiceV2_0/SplitJoin/RecXferInqSJ".
com.bea.bpel.compiler.CompilerException: Unexpected error compiling the runtime metadata for Split-Join: "FISRecXferInqServiceV2_0/SplitJoin/RecXferInqSJ".
     at com.bea.alsb.flow.compiler.ProcessMetaDataFactory.create(ProcessMetaDataFactory.java:99)
     at com.bea.alsb.flow.resources.ResourceDeployer.deploy(ResourceDeployer.java:104)
     at com.bea.alsb.flow.resources.ResourceDeployer.access$100(ResourceDeployer.java:64)
     at com.bea.alsb.flow.resources.ResourceDeployer$LoadListener.onLoad(ResourceDeployer.java:545)
     at com.bea.wli.config.impl.ResourceListenerNotifier.sendLoadNotificationsInContext(ResourceListenerNotifier.java:239)
     Truncated. see log file for complete stacktrace
>
<Jan 24, 2012 5:49:34 PM CST> <Error> <ConfigFwk> <BEA-000000> <Failed in onLoad. Will not deliver the remainder of onLoad notifications to this listener.
java.lang.RuntimeException: Unexpected error compiling the runtime metadata for Split-Join: "FISRecXferInqServiceV2_0/SplitJoin/RecXferInqSJ".
     at com.bea.alsb.flow.resources.ResourceDeployer$LoadListener.onLoad(ResourceDeployer.java:551)
     at com.bea.wli.config.impl.ResourceListenerNotifier.sendLoadNotificationsInContext(ResourceListenerNotifier.java:239)
     at com.bea.wli.config.impl.ResourceListenerNotifier.access$400(ResourceListenerNotifier.java:41)
     at com.bea.wli.config.impl.ResourceListenerNotifier$1.execute(ResourceListenerNotifier.java:152)
     at com.bea.wli.config.transaction.TransactionalTask._doExecute(TransactionalTask.java:217)
     Truncated. see log file for complete stacktrace
com.bea.bpel.compiler.CompilerException: Unexpected error compiling the runtime metadata for Split-Join: "FISRecXferInqServiceV2_0/SplitJoin/RecXferInqSJ".
     at com.bea.alsb.flow.compiler.ProcessMetaDataFactory.create(ProcessMetaDataFactory.java:99)
     at com.bea.alsb.flow.resources.ResourceDeployer.deploy(ResourceDeployer.java:104)
     at com.bea.alsb.flow.resources.ResourceDeployer.access$100(ResourceDeployer.java:64)
     at com.bea.alsb.flow.resources.ResourceDeployer$LoadListener.onLoad(ResourceDeployer.java:545)
     at com.bea.wli.config.impl.ResourceListenerNotifier.sendLoadNotificationsInContext(ResourceListenerNotifier.java:239)
     Truncated. see log file for complete stacktrace

Most 8.1 development was done with Workshop (the version before Eclipse integration). It is not set up to do Workshop Framework builds with Eclipse OOTB.
If you are going to use Eclipse, then I would guess that your builds would be best done using Ant or similar. Check out the wls web service samples that install with the product and see if you can use any of those as a basis for using ANT in Eclipse.
This is only theory, as I have not worked extensively with 8.1.

Server error in '/' Application Runtime error

hello everyone,
I have a sharepoint 2013 in a simple farm server configuration(web server and application server on the same server (windows server 2012), and a seperate sql server ( unsure of version, but will check). All servers using domain authentication.
Users are randomly getting this message:
Users are getting this randomly but are able to click the back button to get to their web pages with list views. Any ideas why it might be happening?
George Ferreira

Hi George,
According to your description, my understanding is that you got an error when you used SharePoint 2013.
Please change the web.config files as the followings:
1.In customErrors tag set mode="Off" to "On
2.In SafeMode tag set CallStack="true" to false
3.In Compilation tag Debug="false" to true
There are three web.config files you need to change, the paths are:
1.C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\TEMPLATE\LAYOUTS\web.config
2.C:\inetpub\wwwroot\wss\VirtualDirectories\Port_Number\web.config
3.C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\CONFIG\web.config
Finally reset IIS to do go to windows start->run->IISRESET (for this you must have administrative permissions).
More information, please refer to the link below:
http://sp77.blogspot.in/2011/08/server-error-in-application-runtime.html
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Error initializing Java Runtime Environment. You may need to reinstall Flash.

...This is really annoying.
I work with adobe cs5. Recently, it started to not work. I would have to restart it over and over to get it to compile an swf properly. So I am trying cs5.5. I get this error "Error initializing Java Runtime Environment. You may need to reinstall Flash."
So im like OK....Thats helpful....
-reinstalls flash-
"Error initializing Java Runtime Environment. You may need to reinstall Flash."
-reinstalls java-
-reinstalls flash-
-reinstalls adobe flash cs5.5-
"Error initializing Java Runtime Environment. You may need to reinstall Flash."
-google-
So I come across this post. Follow it exactly.
"Error initializing Java Runtime Environment. You may need to reinstall Flash."
I change the thingy in the file to Xmx1024M
"Error initializing Java Runtime Environment. You may need to reinstall Flash."
I come to the forums.
What do I do now?

Intro:
Finally I got near to roots of that mysterious Error
"Error initializing Java Runtime Environment. You may need to reinstall Flash."
So here is what I'm found out + Bugfix
JavaPatch for Adobe Flash CS5 / CS6...     Ver #1 [ 21.01.2014 ]
======================================
This is the fix the bug in Flash tell you all the time that
Java could not be loaded. The effect of this error is that
Actionscript will not work.
Flash gives a little misleading error messages that tells you that
"There is no Actionscript in the current Project"
background information:
The problem is that the Java Virtual Machine.dll demands on startup
250MB huge contiguous memory blocks, but the 2GB-Virtual address
space of the Flash.exe process is already filled with various loaded dll's
BEFORE you continue ensure that you install/copied JRE 1.8.0 update 31 to
%ProgramData%\Adobe\CS5\jre\
For testing check if ...Adobe\CS5\jre\bin\java.exe starts
(and shows a help about available commands)
The Patch is for 32-bit version only!
(however the problem is probably not in the 64-Bit Version - since there a process has a much large more 'space')
Well SIMPLE FIX / Workaround:
Use 64-Bit version of Adobe Flash !
TechDetails:
Java's JVM.dll loaded in Ollydebug - The patched / change bytes are red.
^-Note that String ASCII "NUMA page alloc..." - will be a great 'link' to easily find that location in other JVM-versions to applied the patch there. Open jvm.dll in Ollydebug open String Ref. Windows and search for the string...
Download instructions:
Right click on picture above and download it.
Drag/open the *.jpg in / into Winrar / 7-Zip
OR
Rename 'Flash-CSX-jvm-JavaPatch #1.7z.jpg' -> 'Flash-CSX-jvm-JavaPatch #1.7z' so you open it by doubleclick
-> My creative solution for that A-Dope-board missing 'Attach file feature'
Tested:
with Adobe Flash CS5 + JRE 1.8.0 update 31
More Techstuff:
Some of my notes that might be useful:
Note the memory is not real allocated in the way it can be use since to write or read from it is just allocated as
MEM_RESERVE like you see in the screenshot above. And freed just a little alter.
It seems that java just checks if it could possible the maximal the JVM is made for.
Note the problem is not that you have to less physical RAM installed.
It's more related how memory is organise.
Well in 32 Bit each process has 4GB (or well practically Windows limits this to 2GB).
0x00000000 to 0x7FFF0000
This space is virtual and not actually claimed (else you would very quickly run out of RAM) but it a kind of potential or Adress system. Na sorry that'll be to offtopic to explain all the basic's about memory.
Adobe Flash CS5 calls
jvm.dll!JNI_CreateJavaVM( OUT **p_vm, OUT **p_env, IN *vm_args);
The 'vm_args'
typedef struct JavaVMInitArgs {
    jint version; 00010004
1. /* user classes */
-D java.class.path=
C:\Program Files\Adobe\Adobe Flash CS5\Common\Configuration\ActionScript 3.0\;
C:\Program Files\Adobe\Adobe Flash CS5\Common\Configuration\ActionScript 3.0\asc_authoring.jar;
C:\Program Files\Adobe\Adobe Flash CS5\Common\"...
2. /* set native library path */
-D java.library.path=
C:\ProgramData\Adobe\CS5\jre\bin
3.
-D java.Home=C:\ProgramData\Adobe\CS5\jre
4. classpath append
-X bootclasspath/a:
C:\Program Files\Java\jdk1.7\jre\lib\ext\QTJava.zip
5. Headless mode is a system configuration in which the display device, keyboard, or mouse is lacking. Headless mode support has been available since the J2SE 1.4 platform.
-D java.awt.headless=true
    jboolean ignoreUnrecognized; 1
} JavaVMInitArgs;
So for any further exploration about this Java problem setting a breakpoint to 'JVM.dll!JNI_CreateJavaVM' will be a great startpoint

During the installation of iTune update received error message C runtime Library error 7 1114, R6034. Unable to now open my itunes. How do I fix this?

During the update of iTunes to my desktop, I received the error message: C:runtime error. R6034 Error 7 1114. What does this mean and how do I fix it?
Not that computer savvy so please walk me through the fix in simple terms. Thanks

Hey lucky scruffy,
Thanks for the question. I understand that you are experiencing issues with iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M.

Reg errors in webdynpro runtime

Similar Messages

Maybe you are looking for