Reg.how to config sub contract systems

Hi,
The sap B1 how to create and config the sub contractor system(Top to end)
1.Dc prepare
2.Retun receipt
3.Billing passing
4.Another TDS system
regards
Prakash

hi,
The sap B1 how to create and config the sub contractor system(Top to end)
1.Dc prepare
Create subcontractor warehouses.
Create finished product warehouses.
Create production order for finished product,Child item defaulted to subcon warehouse,incluse
conversion charges as child item apply base qty for it.
Do stock transfer to subcontractor.
2.Retun receipt
In case you want to book conversion charge,create conversion charges item as inventory item,
Do GRPO for total conversion charges as quantity and price as 1.
Do receipt from production after receipt from subcon.
3.Billing passing
Create AP invoice for subcon. from GRPO
4.Another TDS system
Apply TDS applicable in AP invoice.
Hope it will be helpful.
regards
Jeyakanthan

Similar Messages

  • How to take sub-contracting challana print out

    Hai friends,
    How to take sub-contracting challana print out.
    Where i have to do the message settings for taking return delivery excise document print out ( rejected RM  material return to vendor ).
    Please guide me.

    Hello,
    During creation of 57F4 Challan in J1IF01, in Basic Data Tab Page, scroll down the screen, you will get a check box of "Print immediately" just activate it before saving, it will print the Subcontracting challan once you save it.
    And to re-print the same go to J1IF11 and activate this indicator again and save.
    Configuration Checks: -
    SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Subcontracting > Subcontracting Attributes > Check whether Subcon Output Type - J1IF is maintained here.
    Also check in M706 - For Output Type - J1IF should be in place.
    Note: - There is no need of maintaining condition record for output type J1IF in MN21 and also no need to do any further configuration.
    Maintain printer in the SPRO - IMG - MM - Inventory management - Output determination - printer determination.- printer determination by plant / storage location ( OMJ3). Here for the application area ME, condition type J1IF, assign the printer.
    regards,

  • Reg: finance docs. for sub-contracting GR

    Hello
    how many finance documents will system generates when goods reciept from subcontracting made.
    Thanks
    Raju

    Hi,
    Once a Subcontracting Goods Receipt is done the following entries are made:
    FG BSX acc. Debit Acc.
    GR/IR Cle.acc. WRX acc. Credit Acc.
    FRL Acc. Debit Acc.
    BSV acc. Credit Acc.
    BSX acc. of components Credit Acc.
    GBB - VBO Acc. Debit acc.
    PRD acc. Some time Credit &
    Some time Debit
    For more check the link:
    http://www.sap-basis-abap.com/sapmo005.htm
    Regarding Documents, Two docs are generated one is Material and other is Accounting Document.
    Reg,
    Ashok
    Assign points if useful.

  • Reg !!! Sub-contract

    Hi all,
               In sub-contracting, when is receive the goods by using Mvt 101. Then the material provided to vendor (mvt type 541) is booked against Mvt 543.
                                   My query is against Mvt type 543 (material consume) only Material doc. is created or Accounting doc also created. If accounting doc created then what are the different account affected.
    Thanks in advance
    Regards
    Sanjay

    Hi,
    When you order for the FG material in the Subcon Po you need to mention the Components(BOM will be included with SFG, ROH, Packing material)
    When you do the GR following entry will happen in the system
    FG or SFG receipt from sub contractor
    Consumption of raw material(ROH) account   Dr 
    Inventory account – raw material(RoH)          Cr 
    Conversion charges                                     Dr
    GR/IR clearing                                            Cr
    FG Stock account  (FERT or FG)                 Dr
    Cost of goods manufactured                        Cr
    On invoice verification of subcontractor invoice
    Conversion charges clearing ac          Dr
    Vendor account                                Cr
    Hope this will help you.
    Regards
    John

  • How to config  Sun Java System Application Server 9

    Hi
    I developed a small web application using Netbeans Visual Web and Sun java application
    Server 9. and it working fine. Now how can I access the application from another machine
    (Clint) through net work
    Can anyone please help?

    Huh? You'd have to go to some trouble to make it [bold]not[bold] accessible from another machine on the network! Just point your web browser at the machine, as you must have done during development and testing. If you pointed your browser at localhost before, replace localhost with either the host name or IP address of your web server

  • Sub Contracting for Production Order

    Hi All,
    Scenario is like this, I release Production order & deicde to sent it to sub contracting & PO Created is wth Acct assignment F with no material master.
    after this how do i account sub-contacting bills with MIGO i'm not able to make a GR.
    should i maintain a material master in purchase order, how do i send material to sub-contractor.
    Regards

    Hi,
    You have to maintain material master for both - Ordered Material & the material in the BOM of ordered material. Also you have to maintain procurement key as X - Both procurement types possible. When the planned order is created for the final product, you can convert the Planned order to PR with item category L - Sub Contracting, system prompts the material to be supplied to subcontractor in Material Component list (BOM Material). You may transfer the material to the sub-contractor via transfer posting (MB1B) movement type 541. When you post GR for final product, the BOM material is consumed for the Final product via movement 543.
    Hope the query is fulfiled.
    Reward proper points if the answer is helpful.
    Regards,
    Prashant Kolhatkar

  • Sub Contracting in FIFO Valuation Method

    Dear All,
    I am facing one serious problem while using Subcontracting Addon.
    We have developed Sub Contracting Add-on based on Standard Valuation Method and it is working fine.
    But when we use FIFO Valuation method then it will not allow.
    So could you please guide me the process/procedure how to implement Sub Contracting in FIFO Valuation Method.
    Means what are changes needs to make it success in FIFO.
    Thanks
    Vikas

    Hi
    Yes its right not to change the earlier valued items on one costing method to another.
    Imp. to note that, for manufacturing/sub-contracting the best costing method is Standard. Because, in manufacturing processes, its very much impossible to track the exact in and out of material as per FIFO; costing method comes into picture as you made some inward and outward or some movement of material, i.e. in case of purchasing material FIFO starts acting as you start consuming the materials or you transfer the material from one warehouse to another, other than in which you have received the material. When you have material on floor, its quite impossible to track the exact movement of material, means which material is actually being processed on the floor. So, If we use FIFO for such items, then actual costing will be always different from executed/system costing, Also, FIFO is suggested for only those business practices who are following the JIT principle. But, by having Special as costing method for manufacturing items, we avoid such problems to have actual costing, though it may again differ from actual costing, but overall as per the business experience we come to know COGS to actual basis.
    In Special Costing method, it's recommendable to revise the Standard cost of the items, periodically.

  • Sub-Contracting for Make to Order

    Hi all
    We are having Make to Order Scenario. We have created a sales order and some materials for BOM have to send for Sub-Contracting Process.
    I have created a PO with Acct Assignment "E - Ind. cust. w. KD-CO"  and Item Category as "L".
    But as per Standard SAP Acct Assgnmt "E" and Item Category "L"  is not possible.
    Consider the Header material is "X "  and Component is "Y".
    I am having Material "Y " in Sale Order Stock. Now when i do MB1B using 541 mvmgt type the system is not allowing me to post .
    please suggest me this scenario how to proceed. 
    <b>For a Make to Order scenario how to do Sub-contracting Process.</b>
    Regards
    Kumar

    Hi,
    For transfering sale order stock to sub-contractor the movement type is 311-E. Here, you have to create the sub-contractor storage location & then transfer the stock (of BOM material) to sub-contractor storage location by movement type 311-E in transaction MB1B. While posting GRN of the upper material, system posts the consumption of the BOM material against the upper material.
    Hope this works.
    Regards,
    Prashant
    - Reward points if answer is helpful

  • Sub contracting in CS order

    Hi Guys
    Any idea how to update the field subcontracting in CS order with BAPI or other functions?
    Batch input is not optional.
    Thanks in advance

    Hi,
    You have to maintain material master for both - Ordered Material & the material in the BOM of ordered material. Also you have to maintain procurement key as X - Both procurement types possible. When the planned order is created for the final product, you can convert the Planned order to PR with item category L - Sub Contracting, system prompts the material to be supplied to subcontractor in Material Component list (BOM Material). You may transfer the material to the sub-contractor via transfer posting (MB1B) movement type 541. When you post GR for final product, the BOM material is consumed for the Final product via movement 543.
    Hope the query is fulfiled.
    Reward proper points if the answer is helpful.
    Regards,
    Prashant Kolhatkar

  • Sub-contract without BOM

    Hi
    How to create sub-contract without BOM..We want to create a subcontract for a customer return finished product .Even this Product have bom.We don’t want to send any components with the FP.We want to send some service materials with this FM.How to do this in SAP?
    Thanks
    Nick

    hi Nick,
    have not tried in one company code, any way you can try this with creating another plant as subcontracting vendor & process in the same way how you process for sub contracting.
    1) Create plant as sub-contracting vendor
    2) create po with item category L
    3) send components
    4) receive materials.
    but since it is within a company code check for legality involved with FI, you can customize special transaction key for this may be with movement types since it is within a company code, that is the reason i asked you is it within a co.code
    Regards
    Ranjit

  • Config of contract type

    Anyone knows the configuration for the contract type.how to config the contract thru SPRO.
    I wanna to config the contract types  with repect to sales area.
    plz send it urgently.......

    Hi,
    Contract types are configured through Tcode VOV8 (Sales document types maintaince).
    Once you configure the document type,assign this contract type to your desired sales area in Assignment of document types to sales area.
    Maintain the proper copy control for furthur processing.
    Reward points if useful
    Regards,
    Amrish Purohit

  • Sub-contracting through Project system.

    Hi
    Can some one please help me in understanding how Project system (PS) is supporting sub-contracting scenarios.
    I am looking for activity sub-contracting and also sub-contracting with Project stock materials.
    I am aware of normal sub-contracting through production order and also sub-contracting through MM. I am specifically looking for sub-contracting in PS.
    Thanks and warm regards,
    Jagadeesh

    Hi,
    If requirements for subcontract items (or services) are generated automatically from PS just make sure that the right document category is used (subcontract) then any requisitions or planned orders etc. will have the right category.
    There is no difference between PP, PS and PM effectively, they all use subcontracting in the same way it is just how the requirement is triggered that is slightly different.
    If you need details on how to trigger the right type of requirement through PS then you may need to use one of teh financial forums that cover PS? (is there one?)
    Steve B

  • HOW TO DELETE A SUB CONTRACTING PO

    Hello Everybody,
    I have a scenario where i am trying to delete only Sub contracting PO's. How can i do this. There are all different kinds of PO's being CIFed to APO system but out of those i would like to delete only the Sub contracting PO's between a Plant & a Vendor.
    I am planning to use Program /SAPAPO/DELETE_PP_ORDER.
    But i am not sure how do i filter the Sub contracting PO.
    Best Regards,
    King

    Hello King,
    In report /SAPAPO/DELETE_PP_ORDER you can filter orders based on ATP category for deleting only Sub Contracting PO.
    Regards, Chirag
    Edited by: Chirag Kothari on May 25, 2010 4:56 AM

  • How to select the Alt BOM in the Sub-Contract PO

    Dear All,
    please tell me how to select the alternative BOM in the sub -contracting purchase order.
    for the above said requirement i have cretaed production versions and the BOMselction method also i have selcted in the material master data as "2" means BOM by produ ction version.
    so how can i select the alt BOm in theSub-contracting PO.
    Thanx in advanvce
    regards
    Srinivas

    Hi,
    SAP help says you have to write the production version in the subcontracting info record:
    http://help.sap.com/saphelp_46c/helpdata/en/b2/fa1ed4d51d11d1a69e0000e83235d4/frameset.htm
    http://help.sap.com/saphelp_46c/helpdata/en/35/b0e96787a62488e10000009b38f9b7/frameset.htm
    (I've checked a subcon-info record but sorrowfully I havent found a field for this...if you can find please let me know)
    BR
    Csaba

  • How to find out the link for the tables for sub contract PO

    Dear All,
    How to find out the link for the tables for sub contract PO, I am looking for the fields Material, Unit, Batch no., quantity.
    Please provide the solution for the Table related to ABAP.
    Thanks,
    V.V.

    Hi,
       Make use of the table EKKO, EKPO...
    For subcontract please select the option in EKPO-PSTYP.
    Regards
    GK.

Maybe you are looking for

  • Tools 8.50 on Debian / Ubuntu

    Hi, Has anyone tried installing tools 8.50 on a debian / ubuntu system?   ( yes, I know this is not supported )   ( yes, I know I could use Oracle Enterprise Linux ) Oracle, WebLogic and Tuxedo all seem to run ok, so if I can get the database loaded

  • Create index in SQL using a variable

    Hello, need to programatically create an index in a SQL script using a variable for the tablespace name. VARIABLE ts_name VARCHAR2(50) BEGIN SELECT tablespace_name INTO :ts_name from user_indexes where TABLE_NAME = 'PREFERRED_CUSTOMER'; end; How woul

  • Error using SQL data in javascript vars

    I have a javascript routine which queries sqlite for a series of top-level categories, then, for each category, executes another query, using an item ID which is a result of the first query as follows: // Get first level of categories table var stmt

  • New network (and much more) monitor for XFCE panel

    A few years ago I wrote a tiny app to show a text network monitor in the XFCE panel, resembling the previous one I was familiarized with (in KDE?). The past month I started fixing a bug and ended in a full rewrite, but keeping the original simplicity

  • Problem: Execution of T-CODE via RRI ( RSBBS )

    Hey, I have an ongoing problem with rsbbs using a t-code as target. I want to use rri within a bw bex-query to call rsdmd within the source system. So far so good but everytime when I use the rri via context menü within bex to following happens: 1.)