Reg : Material warehouse management view 1 & 2

Hello All,
Using a Z-programI am extending the warehouse managemnt view for a single Plant, the view gets created successfully. But some how an Inactive version of Warehouse management view gets created for other plant also. How we can prevent the creation of this inactive view creation.
Please let me know your suggestion.
Regards,
Ravi Kasale.

from Note 545626 - FAQ: Data transfer problems:
Read the explanations in OSS Note 67616.
Bear in mind that, in the structure/table HEADDATA, the for BAPI methods StandardMaterial.SaveData (BAPI_MATERIAL_SAVEDATA) and StandardMaterial.SaveReplica (BAPI_MATERIAL_SAVEREPLICA) of the business object BUS1001006, you can select the required views and these correspond to the respective maintenance status.
In the segment E1MARAM of the MATMAS IDocs, you can assign the overall maintenance status in the field VPSTA.
Edited by: Jürgen L. on Jun 6, 2011 4:01 PM

Similar Messages

Materia master warehouse management view

Hi Experts
In OMS2 I have enabled the Warehouse Management view for ROH & HALB.
But In MM01 appears both warehouse management view 1 & 2.
How do i restrict it to appear view 1 only and not . Also how to control in the field reference for a specific plant only. I have assigned a new field reference #0009.
thanks
Edited by: SAP-MM1 on Aug 25, 2011 4:40 PM

Hello ,
For Field Reference please make sure you have maintained the following:
Txn OMSR
Eg Field MBEW - MTORG -> Selection group 128
in Txn OMS9
Field Selection group 128 Field reference 0009 -> Optional Entry
Txn OMSA
Plant 1000 -> Field reference 0009..
As for Views , you cant restrict by authorisation for just one view . You can restrict the wholw view by using Authorisatio Object M_MATE_STA. OR you can customise screens. Please look at note 44410
Regards
Amber

Delete the warehouse management view and archive before deleting.

Hi All,
I have requirement like this where I need to delete the warehouse management view from about 40k records
also need to archive the materials in order for the views to truly be deleted, instead of just marked for deletion.
Could you please help me in proceeding with this.
Thanks,
Reddy

Hi,
in this way which I described you will delete the warehouse managment view for the material ( after that your material will no longer exist for that warehouse management organization data, but the other organization data for the material will exist). It's depend on where you are going to set the deletion flag for the material in MM06 before Archiving/Deletion with MM71
Regards Vassko!

Delete the warehouse management view archive the materials before deleting

Hi All,
I have requirement like this where I need to delete the warehouse management view from about 40k records
also need to archive the materials in order for the views to truly be deleted, instead of just marked for deletion.
Could you please help me in proceeding with this.
Thanks,
Reddy

Hi,
in this way which I described you will delete the warehouse managment view for the material ( after that your material will no longer exist for that warehouse management organization data, but the other organization data for the material will exist). It's depend on where you are going to set the deletion flag for the material in MM06 before Archiving/Deletion with MM71
Regards Vassko!

Work scheduling view and warehouse management view

Can any one explain what is Work scheduling view and where it need to be extended fro raw material or Finished or Semi finished

Hi,
Work schedule is purl related to PP where as warehouse management related to warehouse
where it need to be extended fro raw material or Finished or Semi finishe
It can be for three
check following link also
[work schedule|http://www.sap-img.com/production/work-scheduling-view-in-material-master.htm]
Regards
Kailas Ugale

Reg: Material change Management.

Dear Friends,
can i get some information about Material change management.
Please let me know..
thanks in advance.

Hi,
Pl go through the sap help... will get deatail idea.
[http://help.sap.com/erp2005_ehp_04/helpdata/en/d8/731cab4b7511d1894b0000e8323c4f/frameset.htm]

Can not see warehouse management data screens for material while extending.

I want to extend material for warehouse managment views.I can not see these views for the material in MM01.Looks like this is some thing to do with material type configuration.Can some one assist me how to do this?

1)Check whether the material exist for that plant and storage location which is assigned to warehouse number .
spro->enterprise structure->assignment->logistic execution->assign warehouse number to plant/sloc.
2) Check in OMS2 tcode in the material type setting WM view is selected.

Warehouse Management-Material

Hi ALL,
How can we know if the Material is warehouse managed..? The material can be defined to be warehouse managed in Material Master...warehouse mgmt 1 tab...is it rite? ...
If I select the warehouse mgmt tab of material master i get an error saying "Warehouse mgmt 1 is not active for the organisation level." and it asks me to enter warehouse number..So does this error message mean that Material is not Warehouse Managed....?
Now how to make material Warehouse managed in this case...? Also if the material is made warehouse managed then is it possible to make the material without warehouse managed again....? If yes then ...How?
Thanks in advance..
Regards,
Ameya K.

Hello Ameya,
How can we know if the Material is warehouse managed..? The material can be defined to be warehouse managed in Material Master...warehouse mgmt 1 tab...is it rite? ...
If material is managed for warehosue then you will be able to see material record in table MLGN (Material Data for Each Warehouse Number). This is for consultant level.
If any user wants to see whether material is managed for any warehouse, then go to MM03 tcode, give the mateiral number and press enter, select the WM view 1 & 2 and press enter, when it comes to organization level press F4 in the WHN field, it it is maintained then it will pull that WHN with X mark.
If I select the warehouse mgmt tab of material master i get an error saying "Warehouse mgmt 1 is not active for the organisation level." and it asks me to enter warehouse number..So does this error message mean that Material is not Warehouse Managed....?
Warehouse is activated for the combination of Plant and Storage Location, so you need to create the warehouse number in Log execution area and assign it with Plant/SLoc combination in Organization assignment.
Now how to make material Warehouse managed in this case...? Also if the material is made warehouse managed then is it possible to make the material without warehouse managed again....? If yes then ...How?
Once you assign warehouse number to plant/Sloc in assignment and you need to complete the other settings related to WH. Then when you do any inventory transaction which is relevent to that Plant/Sloc combination (which is assigned to WH number) then the system will process Warehouse transactions.
If you have carried out some transaction with Warehouse level, it is not advisable to delete material for WM view (MM06), but you need to complete the open transactions and made the inventory zero for that material then only you need to deactivate/delete WM view for that material.
Hope this helps.
Regards
Arif Mansuri

Create Quality Management view for a Material in background mode

I want to know if there is a way to create a Quality Management View (Quality Management tab) on Material Master (material already extended to plant ) in background mode.
The requirement is to add inspection setup data for a material extended to a particular plant in background. I tried using 'BAPI_MATINSPCTRL_SAVEREPLICA' to add the data and it works perfect as required. Now the problem is this BAPI is creating the inspection setup data only for the material which has QM tab in MM02 for e.g. I manually created the inspection setup for a Material from MM01 and then deleted it , now the BAPI works fine for this material because when I created an inspection setup from MM01 it created the QM tab and after i deleted the entry the tab was still there with no entry in inspection setup.
I want to create inspection setup for a material which does not have QM tab.
I have to create everything is background mode. BDC is one option which I am list interested in.
Thank you for helping in advance.

Thank you for looking into my issue. I have to do the inspection setup in background without using any front end transaction.

Reg: material needs the batch management

Hi All,
The material needs the batch management. We have created without the batch
first and the few movements were done, then tried to put the flag after the
stock remove and sales order deletion, however could not process. System
messaged as below in italic. Please let me know how we could change the MM
date for the batch. The sales order alive now.
The batch management requirement cannot
be changed for the following reasons:
SD documents exist (orders or deliveries) that have not yet been
processed or that have been processed only in part.
Thanks & Regards
Siva

Hi,
This was asked in LE forum also, please read this thread:
reg. activating batch management for existing materials
You should fully process the sales documents (sales order - delivery - invoice) or you should delete them and after setting batch requirement for your material master you could recreate the them (SO, delivery).
Regards,
Csaba

Material Managent view

Hi,
Regarding to the first question on material management view I would like to clarify further that while creating a material using Material master I could able to see only MRP 1 and MRP 2 view but not the MRP 3 & MRP 4 view .How can i see all four MRP views while creating,modifying as well as viewing the material master ?
Thanks & regards
Rabi

Hi Rabikumar,
You need to maintain following setting in OMT3E
SRef: trans    *
SRef: user     *
SRef: matl type    *
SRef industry       *
SSeq                 21
Screen Sequence description     Std ind.(short) tab pages
Hope this solve your problem.
Regards,
Raja.
Edited by: Raja on May 20, 2009 1:01 PM

MM11-Schedule Creation of Material: Missing MM views & custom fields?

Hi,
I am trying to implement use of transaction MM11/MM12/MM13, but I noticed that when I go to create or change material records I do not get the same mm views when I use MM01/MM02. (ex. i am missing classification view when trying to use mm11). I also do not get any of the custom fields that my company added to the material master? Any ideas where in IMG I can correct this?
Regards,
Ernie

Here is the explanation of each of those characters in PSTAT.
User department Maintenance status 
Work scheduling A
Accounting B
Classification C
MRP D
Purchasing E
Production resources/tools F
Costing G
Basic data K
Storage L
Forecasting P
Quality management Q
Warehouse management S
Sales V
Plant stocks X
Storage location stocks Z

List of differences in warehouse Management after posting inventory movemen

Hello,
is there a possibility to get a list of differences in SAP Warehouse Management after posting the movements and after Li21?
I tried with listing all postings (bookings) of movement type 711 and 712 in MM, is it correct?

Hi,
If you are analysing the difference in the WM like difference occured during GR or GI then it will be moved to storage type 999.
So in materials in storage type 999 will be due to difference. If you are clearing the difference, in LI21, system will create a material document with 711 to reduce the inventory or 712 to increase the inventory.
You can list the documents generated via 711 and 712 in MD51 to lsit down the differencs.
You can also view the reports LX17 and LX18
Thanks,
JK

Which SAP module for static location control in warehouse management ?

Hello,
can someone please help me answering this question:
One of our warehouses is managed with location. One item can be stocked in more than one location, but the user decides which location he puts the item in. We do not need dynamic location control.
Do you think we can manage this with the modules we plan to implement (MM, SD, PP, FI, CO), or do we absolutely need a new module (WM) ?
Thanks in advance for yourr help.
Regis

Dear Regis,
If using the Warehouse Management System, a storage location can be further defined down to the bin level.
Although it is possible for you to manage warehouse inventories using the Inventory Management (IM) application component, the primary difference between managing stock in WM and in IM is that in IM, the system can only display the total stock of a material for a storage location. If a warehouse is small and easily manageable, then the use of IM may be sufficient to fulfill your needs.
WM, on the other hand, offers the capability to manage stock quantities in each individual storage bin in highly complex storage facilities. This means that, with WM, you can optimize the use of all storage bins, mix pallets belonging to several owners in randomly slotted warehouses and know exactly where a particular material is located in the warehousing complex at all times.
The bottom line is it all depends on various facrors including budget, complexity etc.
Regards,
Naveen.

T-codes for warehouse management

hi.
can anybody gives the mostly used t-codes for warehouse management

SAP WMS - Decentralized Warehouse Management System Integration Setup
You can operate the SAP Warehouse Management System (WMS) as a stand-alone decentralized system that is independent of a central Enterprise Resource Planning (ERP) System.
You make the necessary settings for the ERP (Enterprise Resource Planning) system within the WMS component (Warehouse Management System).
The steps are set up as a checklist and guide you through the process of configuring the system parameters.
Checklist (For those with the Table Views used transaction code SM30).
1. Customizing for "Enterprise Structure"
- Create storage location in OX09 (if necessary).
- Define warehouse number in Views V_T3001.
(you should not copy the warehouse number in the ERP system)
Activities within a warehouse, like goods movements and physical inventory, are assigned to a specific
warehouse number.
The physical warehouse where these activities take place is identified by the warehouse number.
- Assign plant/storage location to warehouse number in Views V_T320.
(Valid if the component MM-IM (Inventory Management) is implemented.)
Fields : Plant + Sloc + WhN
2. Customizing for "Decentralized WMS integration", section "Central processing" -> Application
- Activate decentralized WMS in Views V_T340DM.
- Define interface to Inventory Management in Views :-
V_156S_WM - Assign WM movement type references to IM movement types
V_T3211 - Delivery-Relevant Parameters for Reference Movement Type
V_T340DL - Delivery-Relevant Data for Warehouse Number
- Exclude stock in decentralized WMS in Views V_T321B
(if the decentralized WMS is not an SAP R/3 system)
- Finally do a consistency check for decentralised WMS in transaction OL20.
3. Customizing for "Application Link Enabling (ALE)", section "Basis Components"
Maintaining Logical Systems in Views V_TBDLS.
Assign logical system to client in Views T000.
4. Make basic settings for RFC in transaction BD97.(if necessary)
5. Customizing for "Application Link Enabling (ALE)", section "Maintain Distribution Model"
You can define the Reduce message types and Activate message types in transaction BD53.
SAP recommends that you use message types :
"MATMAS" (material master tables) and
"DEBMAS" (customer master) as a template.
Be aware that only those fields that are absolutely necessary are transferred from the master data tables in
the ERP system to the decentralized WMS.
6. Customizing for "Decentralized WMS integration", section "Central processing" -> Distribution
Use transaction OL19 to generate distribution model. As far as the application is concerned, when the model
is generated, application-specific Customizing parameters are modified or set (for example, activate
decentralized WMS).
Display or check distribution model
Generate partner profile in transaction BD82.
(you can also perform this activity using ALE Customizing)
Distribute distribution model in transaction BD64 (model view) using menu item "Edit"
If both the ERP system and the decentralized WMS are SAP R/3 systems, the distribution model should be
distributed on a central basis only, that is, via the ERP system.
7. Customizing for "Application Link Enabling (ALE)", section "Maintain Distribution Model" (transaction BD64)
Activate the change pointers for master data distribution using transactin BD61.
If necessary, reduce the message types concerned with transaction BD53.
8. Customizing for
"Logistics - General" - "Material Master" - "Tools" - "Data Transfer : Material Master" -
-> "Define required-field check for ALE/Direct Input" (Views V_T130S)
Define whether an error message should be generated in the receiving system for required fields
from the material master.
Reward points if useful.

Reg : Material warehouse management view 1 & 2

Similar Messages

Maybe you are looking for