Delete the warehouse management view and archive before deleting.

Hi All,
I have requirement like this where I need to delete the warehouse management view from about 40k records
also need to archive the materials in order for the views to truly be deleted, instead of just marked for deletion.
Could you please help me in proceeding with this.
Thanks,
Reddy

Hi,
in this way which I described you will delete the warehouse managment view for the material ( after that your material will no longer exist for that warehouse management organization data, but the other organization data for the material will exist). It's depend on where you are going to set the deletion flag for the material in MM06 before Archiving/Deletion with MM71
Regards Vassko!

Similar Messages

Delete the warehouse management view archive the materials before deleting

Hi All,
I have requirement like this where I need to delete the warehouse management view from about 40k records
also need to archive the materials in order for the views to truly be deleted, instead of just marked for deletion.
Could you please help me in proceeding with this.
Thanks,
Reddy

Hi,
in this way which I described you will delete the warehouse managment view for the material ( after that your material will no longer exist for that warehouse management organization data, but the other organization data for the material will exist). It's depend on where you are going to set the deletion flag for the material in MM06 before Archiving/Deletion with MM71
Regards Vassko!

Materia master warehouse management view

Hi Experts
In OMS2 I have enabled the Warehouse Management view for ROH & HALB.
But In MM01 appears both warehouse management view 1 & 2.
How do i restrict it to appear view 1 only and not . Also how to control in the field reference for a specific plant only. I have assigned a new field reference #0009.
thanks
Edited by: SAP-MM1 on Aug 25, 2011 4:40 PM

Hello ,
For Field Reference please make sure you have maintained the following:
Txn OMSR
Eg Field MBEW - MTORG -> Selection group 128
in Txn OMS9
Field Selection group 128 Field reference 0009 -> Optional Entry
Txn OMSA
Plant 1000 -> Field reference 0009..
As for Views , you cant restrict by authorisation for just one view . You can restrict the wholw view by using Authorisatio Object M_MATE_STA. OR you can customise screens. Please look at note 44410
Regards
Amber

Reg : Material warehouse management view 1 & 2

Hello All,
Using a Z-programI am extending the warehouse managemnt view for a single Plant, the view gets created successfully. But some how an Inactive version of Warehouse management view gets created for other plant also. How we can prevent the creation of this inactive view creation.
Please let me know your suggestion.
Regards,
Ravi Kasale.

from Note 545626 - FAQ: Data transfer problems:
Read the explanations in OSS Note 67616.
Bear in mind that, in the structure/table HEADDATA, the for BAPI methods StandardMaterial.SaveData (BAPI_MATERIAL_SAVEDATA) and StandardMaterial.SaveReplica (BAPI_MATERIAL_SAVEREPLICA) of the business object BUS1001006, you can select the required views and these correspond to the respective maintenance status.
In the segment E1MARAM of the MATMAS IDocs, you can assign the overall maintenance status in the field VPSTA.
Edited by: Jürgen L. on Jun 6, 2011 4:01 PM

I have recently transferred data from my old Mac to my new one. The result was good, but I have 2 users now, whose data I want to merge into 1 single user, so to avoid having to switch from one user to the other to view and use certain files. How to do it

I have recently transferred data from my old Mac to my new one. The result was good, but I have 2 users now, whose data I want to merge into 1 single user, so to avoid having to switch from one user to the other to view and use certain files. How to do it?

Here's an easy way:
Pick the user that you want to eliminate (making sure that the remaining user has administrator privileges) and move all of the data that you want to keep into the Shared folder. Reboot or log out and login to the user you want to keep. Copy all the data from the Shared folder into your account - placing it neatly in folders (Documents, Music, Movies, etc.).
Once the data is moved, log into the account you want to delete just once more to make certain that you've grabbed all the data you want to keep. Log out and log back into your admin account and go to System Preferences>Users & Groups and delete the 'old' user.
That should do it.
Clinton

"Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility." Trying to format my iomega external HD for use with Mac

Hi. Trying to connect iomega ext. HD. i have to reformat for Mac. When i plug in & go to Disk Utility,the external shows up and i'm supposed to click "partition". When i do, a box comes up saying ""Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility." I quit and relaunched, same results. After googling my question, i came up with this:
"Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility."
(Quitting and reopening Disk Utility does not help.)
The following also appears in Console log:
*** malloc[419]: Deallocation of a pointer not malloced: 0x290a410; This could be a double free(), or free() called with the middle of an allocated block; Try setting environment variable MallocHelp to see tools to help debug : for architecture i386 object: ./Applications/iTunes.app/Contents/MacOS/iTunes malformed object (unknown flavor for flavor number 0 in LC_UNIXTHREAD command 27 can't byte swap it)
Workaround
Quit Disk Utility.
From the Finder's Go menu, choose Go to Folder....
Type the following, then click OK: /Library/Receipts
Temporarily remove these iTunes receipts from /Library/Receipts (sort the folder alphabetically as a list):
iTunes.pkg
iTunes4.pkg
You can put them on the desktop, for example. Do not remove iTunesX.pkg or iTunes Phone Driver.pkg.
Open Disk Utility and repair disk permissions again.
Quit Disk Utility.
Put the removed iTunes receipts back in /Library/Receipts.
Note: This issue does not affect Disk Utility's verify or repair disk features.
All seemed good, for a moment, until, upon going back to Disk Utility after removing itunes4.pkg and putting on desktop (i did not have itunes.pkg to remove) the same thing was happening. When i highlite my iomega ext. on left of page, disk perrmissions is grayed and does not allow me to click on it. Same problem from the start. Can somebody please help me out here? That would soooo awesome. Thanx!

i'm just scared i will do something wrong on my own and lose my data.
You shouldn't be scared of that, because you should already have backups. If you don't have backups, then backing up is the first priority.
Insert the Snow Leopard DVD and restart. When you hear the chime, hold down the C key and keep holding it until the Apple logo appears on the display. You should now see the language selection screen. Select your language, then choose Utilities > Disk Utility from the menu bar. In the Disk Utility window, select the external drive (not the internal). The drive may already have a data partition, in which case there will be another icon below the drive icon. Choose the drive icon, then select the Partition tab. Create a single partition with the default options (GUID partition table, Mac OS X Extended Journaled).
When the partitioning is done, select the startup volume on your internal drive in the DU window. Select the Restore tab. Drag the icon of the startup volume to the "Source" field. Then drag the icon of the newly-created volume on the external drive to the "Destination" field. Make sure you have this right. Then click the Restore button, and the data on your startup volume will be copied to the external drive.

None of the solutioin Manager ST and ST-TAO packages were found

Hi all,
I'm in the middle of installation and configuration of SAP TAO. My SAP TAO was fully connected to the SAP SolMan (SAP EHP 1 for SAP Solution Manager 7.0) and to HP QualityCenter/QuickTest Pro (both with version 10).
But I canu2019t connect to the SAP ECC 6.0.
When i run SAT TAO 2.0.6.0, the error message that appears is "The following error message has been sent while cheking the connection to the Solution Manager backend system: None of the solution manager ST and ST-TAO packages where found. Ensure that they are installed.".
I install on SAP ECC 6.0, the files from SAP_TAO_2_0_ABAP / plugin 70x / (KITLRD1.SAR and KITLRDA.SAR), who after deploy with SAPCAR result on
a) CSN0120061532_0034496.ATT
b) CSN0120061532_0034496.PAT
c) CSN0120061532_0038764.ATT
d) CSN0120061532_0038764.PAT.
After that, i put that files on \usr\sap\trans\eps\in and run transation saint to uploading. I see sucess on that operation.
I run again SAP TAO, who is on the virtual machine on the HP QC and HP QTP, and i find again the error.
Important note: on the window of program of SAP TAO when we press the button "Test SAP Connection", the comment is "Function module "TAOAGENT" not found"
What I did wrong or what is missing?
Can anyone help, please
BR
Edited by: catalaopaulo on Feb 7, 2012 7:21 PM

Hi,
The so-called TAOAGENT Function Module is part of the ST-PI
abap package. This package shall be installed on the managed system
you are trying to test (this is NOT the Solution Manager backend).
Depending on the SAP TAO version you are using, you need to install
a corresponding ST-PI version.
You can check the compatibility matrix for further details on this.
See here:
https://service.sap.com/testing -> Additional Information -> Test
Management-> Compatibility Matrix
You can find the install package for ST-PI here:
- http://service.sap.com
- SAP Support Portal
- Software Downloads
- Support Packages and Patches
- A - Z Index
- T
- SAP TAO
- SAP TAO 2.0
- Comprised Software Component Versions
For more information, see the installation note 1404715.
Thank You.
Regards,
Deepika

HT3951 helo when i want to dollar from the online manager football and need for speed the game , i try to buy but i cannot because they told ( your purchase could not be completed contact itunes store support to complete this transaction.) pleasr help

helo
when i want to dollar from the online manager football and need for speed the game , i try to buy but i cannot because they told ( your purchase could not be completed contact itunes store support to complete this transaction.)
pleasr help me for that , i can not buy any thing inside the game .
i wating , thank you
Email : [email protected]

Click here and request assistance.
(75245)

What is the difference between view and materialized views

Hi
What is the difference between view and materialized view ? can we update the base table using views

can we update the base table using viewsYes:
VIEWS
1. an updatable view is one that lets you perform DML on the underlying table
(see Oracle Database Concepts 10g - 5 Schema Objects)
2. non-updatable view requires INSTEAD OF Triggers
(see Oracle Database Concepts 10g - 22 Triggers)
SNAPSHOTS
You can have updateable (and writeable) snapshots - in updateable (writeable) MV replication.
Oracle uses snapshots (Materialized Views - MV) for two different purposes:
1. replication
2. automated Query Rewrite facility (first introduced in Oracle Discoverer, later included in Oracle database 8i).
Replication types in Oracle are:
a) Basic replication (MV replication)
- transaction based
- row-level
- asynchronous from master table to MV (Materialized View)
- DML replication only
- database 7 / 8.0 / 8i / 9i / 10g
- Standard and Enterprise Edition
1. Read-only MV replication
2. Updateable MV replication:
2.1 asynchronous from MV to master
2.2 synchronous from MV to master
3. Writeable MV replication
b) Multimaster replication
- transaction based
- row-level or procedural
- asynchronous or synchronous
- DML and DDL replication
- database 7 / 8.0 / 8i / 9i / 10g
- Enterprise Edition only
1. row-level asynchronous replication
2. row-level synchronous replication
3. procedural asynchronous replication
4. procedural synchronous replication
c) Streams replication
- (redo) log based
- row-level
- asynchronous
- DML and DDL replication
- database 9i / 10g (10g has Down Streams Capture)
- Enterprise Edition only (Standard Edition 10g can execute Apply process)
Regards,
Zlatko Sirotic

Work scheduling view and warehouse management view

Can any one explain what is Work scheduling view and where it need to be extended fro raw material or Finished or Semi finished

Hi,
Work schedule is purl related to PP where as warehouse management related to warehouse
where it need to be extended fro raw material or Finished or Semi finishe
It can be for three
check following link also
[work schedule|http://www.sap-img.com/production/work-scheduling-view-in-material-master.htm]
Regards
Kailas Ugale

HP TouchSmart IQ504 trys to access but ends with the Recovery Manager Screen and freezes or locks.

Hi Everyone,
When turning on the HP TouchSmart IQ504, it freezes or locks at the Recovery Manager Screen. There have been some good suggestions to help with this issue, but so far, none have solved the problem. Control + Alt + Deleter has been tried several times. I did install some anti-virus programs before the computer failed to respond. Have tapped the F8 key and have tried every solution it offers...nothing happens to get the TouchSmart IQ504 going again.. Have also used the esc key, F9, F10 & F11. Nothing with any of those solves the issue. Don't know for certain the operating system, but think it is Windows Vista. And I can't check it now to know what operating system is installed. Can anyone out there help. Would appreciate that very much.
Kindest regards,
from Skowghee

Hello skowghee,
I understand that you are not able to boot into windows.
Turn off the computer.
As you power it back on tap the F2 key. This will load hardware diagnostics.
Run the startup test.
This will test all the hardware in the system and detect any problems.
Let me know how everything goes.

Error connecting to the Exchange Management Shell - and no one can connect w/ Outlook or OWA

Whew - I'm not sure what's happening but everything blew up this morning when another admin rebooted the server...
I can't connect to the Exchange Management shell - I get this:
[<servername>.<domainname>.local] Connecting to remote server failed with the following error message : WS-Management cannot process the request. The operation failed because of an HTTP error. The HTTP error (12152) is: The server returned
an invalid or unrecognized response . For more information, see the about_Remote_Troubleshooting Help topic. + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [], PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionOpenFailed
And in digging around, re-running the sharepoint PSConfig appeard to be a fix for a related issue I was reading about, and since there didn't seemt to be any harm in running it again (I did find the technote and had manually ran it after SP1 was installed)
I ran it and this is an excerpt from the log:
09/08/2011 16:48:05 1 INF                      Entering function Farm.Clear
09/08/2011 16:48:05 1 INF                        Entering function CentralAdminServiceInstance.Reset
09/08/2011 16:48:05 1 INF                        Leaving function CentralAdminServiceInstance.Reset
09/08/2011 16:48:05 1 INF                      Leaving function Farm.Clear
09/08/2011 16:48:05 1 INF                    Leaving function Farm.TryIsJoinedToFarm
09/08/2011 16:48:05 1 ERR                    A failure has been encountered when trying to load the Farm
09/08/2011 16:48:05 1 INF                    Entering function StringResourceManager.GetResourceString
09/08/2011 16:48:05 1 INF                      Resource id to be retrieved is FarmIsJoinedFailureWhileUsingCommandLine for language English
(United States)
09/08/2011 16:48:05 1 INF                      Resource retrieved id FarmIsJoinedFailureWhileUsingCommandLine is Failed to detect if this
server is joined to a server farm. Possible reasons for this failure could be that you no longer have the appropriate permissions to the server farm, the database server hosting the server farm is unresponsive, the configuration database is inaccessible
or this server has been removed from the server farm. To diagnose this problem further, review the extended error information located at {0}. If this problem persists, run this wizard again to disconnect from the server farm. After disconnecting,
run the wizard again to create or connect to an existing server farm.
So I seem to have some massive permissions issues. Is there any kind of a technote or walkthrough that can step me through verifying what permissions should be where? The connect to Internet Wizard won't complete complaining it can't configure
the email and to run it again. That caused the Set Up your Internet Address wizard to not run, complaining you have to run the connect to Internet wizard.

Is there any update on the issue?
No. I gave up and rebuilt the server - this time inside of HyperV!
It's definetly a problem of some sort of a problem with IIS, that much is obvious. It's frustrating, because by not being able to get to the Exchange Management Shell it made recovery of the Exchange database VERY hard.
The rest of this will be a bit of a rant so feel free to stop reading here if you like :)
I'm pretty unhappy with the fragility of recovering an Exchange databas in general - there is a VERY narrow range of parameters to get mail back - and very many things that can prevent you from recovering. Had I suspected that there would have been
1/10th the pain in recovering mail, before I tried to connect the clients to the new exchange I would have made .PST files for everyone - which would have worked since they all had cached .OST files, even if the clients couldn't talk to Exchange due to the
aformentioned IIS problems. Anyway, it was a total nightmare, extremly frustrating and while many of my problems were probalby self-induced, the total lack of a coherant disaster recovery strategy has at least motivated me to be EXTREMLY diligent about
backups - and not just backups, but ensuring that the SBS backup is working and occasionally firing up a clone VM and doing a restore to ensure the one of two ways Exchange can be successfully backed up are indeed working.
With such an extreme dependence on IIS for client acces AND managemet of Exchange, there really, REALLY needs to be more documentation on how Exchange uses IIS, how to step through the registry and other low-level internals to troubleshoot and compare.
I must have read just about every technet article and literallly hundreds of blog entries on recovering Exchange - but the lack of information about Exchange's integration and dependancies on IIS were the most frustrating of all. Talk about putting all
your eggs in one basket and a huge single point of failure ticking time bomb!
And I think it was either SharePoint Express or an accidently applied SharePoint Express update that blew up IIS. A few days after that update got applied the server was restarted, and that's when everything went completly sideways. That's whats
even more frustrating - that so many applications are so dependant on a now essential layer is frustrating. I realize SBS is an exception to the rule - generally Exchange is installed on it's own server and this isn't a remote possiblity, but any update
(or installer) that messes with IIS really needs to check the environment it's going to go into, and if there is anything at all that could possibly cause a compatibility issue, the update should "fail open" and not install wtihout explicit confirmation
from the admin that he wants to isntall it. Then again, another admin either ran the installer or approved the SP Express update so that still may not have saved me - but if he saw an explicit warning he probably would not have just clicked through
it!
Oh well - thanks for reading if you went all the way through. I'm just glad that it's now over :)

Cannot preview filetype please download the file for viewing and garbled text on a downloaded image

Dear Madam or Sir,
When I click on a file titled "Subject Access Request Letter re Account Number 12527629 Sort Code 60-10-34 24022015.pdf", which is stored in my Account on Acrobat.com I get the response "Cannot preview filetype please download the file for viewing". This file was created from an OpenOffice .odt document of the same title. Please advise.
I downloaded an image, which purports to be a .pdf, from the Royal Mail Track & Trace web facility using my Samsung S5. The text that I expect to see might as well be hieroglyphics for all its similarity to text. Please advise.
Regards,
Ron Platt
PS I have tried to attach both files (.pdf) but am advised "That image type is forbidden". Please advise.

Hi Laura,
I have found the solution to be:
   1. Not to upload to "Document Cloud" from the .pdf stored on my PC and
   open on screen.
   2. To login to Acrobat.com from the .pdf stored on my PC and open on
   screen, select "Document Cloud" and the sub-folder required and then upload
   the file
I have a feeling that there is a glitch somewhere, because after I have
opened a number of .pdf files stored on my PC, and irrespective of whether
I have closed them prior to opening the next .pdf file or left them open,
Acrobat Reader will display (Not responding) in the window title bar. The
"number of files" equates to less than 10. I, then, click on the X at the
right of the window title bar and I am given the option of "Close the
program" or "Wait until the program responds" (or words to that effect). If
i choose the latter, nothing happens and I am back at the unhappy status
quo. If I choose the former, I am told that Windows is searching for a
solution, which it never finds. I, then, have to shut down the PC and then
start it up, again. Clicking "Restart" does not solve the problem.
I have described the above before and received the usual "it cannot be
Acrobat, it is perfect" response. I could, I suppose, screenshot/snip every
sequential screen but why should I have to when I have described the
sequence as fully as I can. So I have found a "workaround" that does not
solve the "Not responding" problem but does solve the problem of not being
able to upload from the open .pdf file to the sub-folder in "Document
Cloud". I am, on occasion, working through the myriad of .pdf files that
are in the root folder of "Document Cloud" and putting them in the correct
sub-folder(s).
I have today read that Google is starting a cellphone service in the USA in
which a monthly "access" rental (US$20) is paid plus a GB capacity usage is
elected for at a rate specified, e.g. US$10.00/GB. If the subscriber does
not use the elected GB capacity Google refunds the US$value of the unused
elected GB capacity.
Suggestion: Adobe applies that kind of policy to its online software
package usage rates, e.g. I elect to subscribe to a particular level of
online software package usage monthly, but, if I do not use all of the
programs included in that online software usage package, I am credited back
for not having used the softwares, that I did not use, that were inclusive
in that online software package offer.
Regards,
Ron

Warehouse Management pros and cons

Dear WM Gurus,
Can somebody care to please help me in creating my first and ever WM feasibility study for my company? Below are the requirements for which I don't know where to start.
Would somebody answer each inquiries with their own opinion?
1.)Explore the functionality of Warehouse Management in SAP.
2.)Submit a report on the feasibility of implementing WM in Company BSS (pros and cons)
3.)Research on the configurations of these feature thoroughly.
4.)Thorough and proper Documentation on functionality and Feasibility of the above is required.
Hoping that somebody can guide me on this... Thank you.
Best Regards,
Dranreb WM (New)
Edited on May 18, 2008 3:20 PM

Hi,
Please download WM Configguide given b ySAP under Logistics--->Logistics Execution.
This gives complete knowledge on WM.
[WM Configguide|http://help.sap.com/printdocu/core/Print46c/en/Data/htm/english.htm]
Reward if helpful.
Thanks and Regards,
Naveen Dasari.

How do the ibooks apps (viewer AND author) identify a publication?

I have a recurring frustration with my own iBooks that I have created in iBooks Author.
I should start by saying that in some cases I created an original publication and layout (Call that BOOK 1) and then later duplicated that file to create a similar publication with different content (Call this BOOK 2). With the second ibooks author file, I used a different file name, a different TITLE (in all applicable areas - the Cover Title, the relevant areas of the inspector (along with the author name), etc.
In the end I have two very different publications of vastly different file sizes, content, titles, etc.
Whichever iBook I first load into the iBooks (reader) app (say, BOOK 1) loads perfectly. Then when I try to do the same with the "relative," it accuses BOOK 2 of being a duplicate of the one already in my library. The only way to read BOOK 2 is to delete BOOK 1 and then load BOOK 2 into my library (at which point it accurately). If I want to read BOOK 1... yep... I have to first delete BOOK 2.
This trend has now expanded... as I have made 5 or 6 publications from the same beginning template, and this has made for a frustrating experience with the concept of having a "library" containing the full collection.
What am I missing? I see that the files copied into my User Accounts library are strings of numbers, not names. Is this number somehow created upon the creation of a new (fresh) ibook project in iBooks Author, and thus never changes regardless of how many times I make edits to the title (or file name) of the book?
Arrrrrggghhh. Any help GREATLY appreciated!

LWShackelford wrote:
I created an original publication and layout (Call that BOOK 1) and then later duplicated that file to create a similar publication with different content (Call this BOOK 2).
That's the problem. Duplicating the file does not work. I don't remember the fix for sure, but I think you have to save your original as a template and then use that as the basis for further books.
This has been addressed in the forum quite a few times. If you search you should be able to find other discussions with a definite answer.

Delete the warehouse management view and archive before deleting.

Similar Messages

Maybe you are looking for