Reg: Problem to find Which view it belongs in MM01
Hi all,
I have to display an ALV list for displaying the changes that have been made for a material during a period.
Iam using a FM CHANGEDOCUMENT_READ
Using this FM Iam getting the details of the material that have been changed in to an Internal table CHGDOC, i am getting the tables and fields where the changes have been made to this internal table.
I need to find out which view these fields occur in MM01 i.e. whether the field belongs in the Basic data view or Sales View or Purchasing view or etc.
For the above problem i tried a sol which is somethin like below:
Iam using table T130F where iam getting the maintenance status using the filedname. And using the maintenance status iam determining the view, but I have a problem in this scenario,.
the problem is:
In the internal table CHGDOC for material description iam getting the table field as DMAKT-MAKTX which is a structure but final changes will be made in the DB table MAKT, how can i find out this table programatically.
If there are any other solution also it would be very helpful.
Kindly help.
Regards
Naveen
Hi,
there is no translation between e.g. MAKT and DMAKT.
There are some "shortened structures" for MAKT, MARM, and so on. They all begin with a "D". It is simply coded. See for example program LWBBIF07.
Shift the leading "D" and watch out for a reasonable table name.
Good luck
Jo
Similar Messages
-
HR how to find which personal area belongs to which country
HR
how to find which personal area belongs to which country
thank you,
Regards,
Jagrut Bharatkumar shuklaHi,
You can use the table T001P for finding that for eg.,
<b>Select molga from t001p where werks = 'Your Personnel area code'.</b>
Thanks
Yogesh -
how to make each playlist for each movie songs ? when i tried to add songs all movie songs comes in row , its very difficult to find which movie song belongs?
Thank you! I put some self help hypnosis tracks to listen to on my iPod. I did not want to go to the next track automatically, I wanted to listen to them individually, one at a time. (If I fell asleep, I did not want to 'wake up' in the middle of a different track.) Your information helps me understand that I need to re-load this playlist onto my iPod from my Mac computer, only first, I need to UNCHECK the boxes in front of each track so the iPod will STOP each time after playing the selected track. It is too bad that so many functions are not availabvle within the iPod, but that is probably why they can make it so compact.
-
How to find which Credit Memo belongs to which AR Invoice?
Hi all.
I wish to get a report where I can know which credit memo is used to cancel which invoice as I found in my report that some of the invoices still showing even the users has cancelled it using credit memo.
I know I might refer to ORIN & OINV but I can't find any relation between these two tables.
Kindly advice me on the above matter.
Thanks.
Best Regards,
xavierHi,
Please check this :
select distinct case when t5.trgetentry is not null then t2.Docnum Else NULL end as [AP Credit Memo] ,
CASE when t4.Baseref is not NULL then t4.Baseref Else NULL end as [AP Invoice Number],
t1.cardcode
from JDT1 T3 inner join OPCH t1 on t3.transid = t1.transid and t3.shortname <> t3.account
inner join ORPC t2 on t3.transid = t1.transid and t2.doctotal = t1.doctotal
inner join RPC1 t4 on t4.docentry =t2.docentry and t4.baseref = t1.docnum
inner join PCH1 t5 on t5.docentry = t1.docentry and t5.trgetEntry = t2.docentry
order by cardcode
select distinct case when t5.trgetentry is not null then t2.Docnum Else NULL end as [AR Credit Memo] ,
CASE when t4.Baseref is not NULL then t4.Baseref Else NULL end as [AR Invoice Number],
t1.cardcode
from JDT1 T3 inner join OINV t1 on t3.transid = t1.transid and t3.shortname <> t3.account
inner join ORIN t2 on t3.transid = t1.transid and t2.doctotal = t1.doctotal
inner join RIN1 t4 on t4.docentry =t2.docentry and t4.baseref = t1.docnum
inner join INV1 t5 on t5.docentry = t1.docentry and t5.trgetEntry = t2.docentry
order by cardcode
Hope it helps.
Kind Regards,
Jitin
SAP Business One Forum Team -
Product Category Level 5 -- Which Product it belong
HELLO i AM USING THE CRM_PROD I see the hierarchy has product category
which I can find in Table COMM_CATEGORY and then relate to product
but under each product category i see accessories in hierarchy which are different levels like in table SMOT179 so how do i Marry this level 5 to find which product it belong to
can u tell me the table name in CRM Where i can go look the level 5 prod category and see what is the product
493567E0C07200D3E10000000AB37660Check these tables
CRMM_PRCAT_ILH
CRMM_PRCAT_ILREF -
Find which report invoke my module pool program
hi everyone,
I have a problem of finding which report calling my module pool program.
I have one module pool program and 5 reports. In all 5 reports i use
call transaction to fill up the screen values of that module pool program.
Now i have to change screen output depending upon the each report.
So i have to find out which report call my module pool program
Is there any possiblity to find out??? my client will not allow to use
SAP memory or ABAP memory.
Thanks in advance,
FlorianHi,
Check this system field. This is for procedures
sy-cprog - In procedures called externally, the name of the calling program, Otherwise the name of the current program. If a procedure called externally calls another external procedure, sy-cprog contains the name of the framework program, and is not set to the name of the framework program of the subsequent calling program.
may be this works. -
How could I find which i-views/pages are being used
Hello
I am pritty new in portal area. I have to administrate an ESS/MSS portal during hollydays. I am trying to find everywhere the way.
How could I find which i-views/pages are being used. Let say I can see which group I belong and which roles are behind.
How could I know in which PCD folder they are taken into account (to e.g give permission to someone not in the group)HI,
the user administration (UME) gives you the information about the user <-> group <-> role assignment.
When you know the role, search in the PCS for it, open the role and you will see all the pages / iviews assigned to the role.
SAP Help: Role Assignment: http://help.sap.com/saphelp_nw04s/helpdata/en/59/bf2287b3cb5e48af94f99929ad15b9/content.htm
SAP Help: Content Administration: http://help.sap.com/saphelp_nw04s/helpdata/en/5a/0339000c0b11d7b84800047582c9f7/content.htm
br,
Tobias -
How do I find which photo iPhoto is telling me I have a problem with?
I'm trying to buy a book I've formatted, but in place of the filename, it just calls it "(null)".
All of the photos I'm using have names.That same one others seem to have gotten: "Unable to Assemble Book -- There is a problem with the photo with the filename “(null).” The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your book"
I've tried restarting iPhoto with the option and command keys pressed, and asking it to repair permissions, but still have the same message... -
How can I find which datafile a row in a huge partitioned table belongs to?
Hello guys.
We have a bunch of potentially corrupt LOB data in a 15TB partitioned table. I have run a query to find out what rows may be corrupt. Is it possible to find out if these belong to a common datafile (the are 450 datafiles in this tablespace)?
Oracle 10.2.0.4 single instance on HP-UX
Any help appreciated
SandyThe Flaz wrote:
Hello guys.
We have a bunch of potentially corrupt LOB data in a 15TB partitioned table. I have run a query to find out what rows may be corrupt. Is it possible to find out if these belong to a common datafile (the are 450 datafiles in this tablespace)?
Oracle 10.2.0.4 single instance on HP-UX
Any help appreciated
SandyTo checking corruption datafile level you can use dbv utility.But to fixing(marking) corruption you have to use dbms_repair package.Please refer below links
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/repair.htm#sthref3170
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/repair.htm#sthref3192 -
Which view to find if database is 32 or 64 bit
Hello,
Which view or where is the information that indicate if the database is 32 or 64 bit. I looked at v$version but the info is not there. Thank you.Once time on this forum I saw one example like below:<br>
Re: 32-bit or 64-bit ?<br>
;-)<br>
Nicolas. -
Problem with the table view's _visibleBounds when used on a scroll view
I've had numerous problems with getting a table view to work on a scroll view since the table view keeps resizing (http://discussions.apple.com/thread.jspa?threadID=2618816&tstart=0)
I have created the views in IB. The scroll view is attached to the controller's view, and is assigned as the controller's view. The frame size of the scroll view is 320x436. I am manually setting the content size in code:
UIScrollView* tempScrollView = (UIScrollView*) self.view;
tempScrollView.contentSize = CGSizeMake(320, 720);
The table view's frame's width/height is set to 280x88 in IB (i.e the size of two cells), and the header and footer are set to size 0.
However, when I run the code, the table view is smaller, it is only 280x68. I have looked in the debugger, and the table view's _contentSize (of its scroll view) is 280x88; however, the _visibleBounds property is 280x68.
I've tried looking into the documentation for the UITableView class, but can't find anything on the _visibleBounds property, or where it is being set and how to force it to the correct size.
If anybody has any advice, I'd appreciate it.I can get around this problem by going to the scrollview which the tableview belongs to, and unchecking the Autoresize Subviews box.
But if anybody knows about the _visibleBounds property, or the rules which are applied when resizing subviews, I'd be interested. -
If you want to stop a JATO request in its tracks, you have a little black
magic at your disposal: you can throw a CompleteRequestException. This
indicates to the JATO infrastructure that it should immeditately stop
handling the request, but not generate an error, as the develper has taken
full control. You can generally throw this error from anywhere, at any
point--it is a RuntimeException, and is "tunneled" through other exception
handlers where appropriate.
In your scenario, you want to check if the user is logged in, and if not,
save the target URL using the parsePathInfo() method. Then, forward to the
login page and then throw a CompleteRequestException.
Todd
----- Original Message -----
From: "nickmalthus" <nickmalthus@h...>
Sent: Monday, January 07, 2002 3:05 PM
Subject: [iPlanet-JATO] Re: onBeforeRequest(); Finding requested view from
requestContext
I guess what I am thinking about doing is capturing the requested URL,
i.e. /appname/modulename/RequestName. In the onBeforeRequest(). I
would then check to see if the user is logged in, and if not, set the
URL in the session(or page session of the Login bean) and forward to
the Login viewbean using the viewbean manager. Inside the login view
in the handleSubmit() method I would authenticate the user and then
get the URL out of the session (or pagesession). I would then
magically get the ViewBean/Command object for the URL or otherwise
"forward the request" as if the user had typed in
/appname/modulename/RequestName, which is the behavior I am trying to
acheive.
It turns out I cannot forward in the onBeforeRequest() as it will
output the viewbean and then continue to process the request which in
turn trys to do a RequestDispatcher().forward after data has been
written to the stream which does not bode well with the servlet
container. Thus, it appears I have no control of the request in the
onBeforeRequest() method. Is this correct?
In light of this new observation I am now going to create a base view
class that all views will extend from and override the
onSecurityCheck() method to forward to my login bean. If I can't find
any other way, I will get the URL from the page session and do a
response.sendRedirect() to the URL.
Thanks for the help!
--- In iPlanet-JATO@y..., "Craig V. Conover" <craig.conover@s...> wrote:
The problem is that you don't know what the target view is until it has
been forwarded to.
Think about it... the request handling view bean (or command object)has
the request handler that has the code that will ultimately forward to
another view bean. This is code that you have written. So, until that
forwardTo() is invoked, there is no notion of a "target page".
What you do know is which "page" (view bean) the request is coming from
(the handling view bean or command class). You can get this from the
HttpServletRequest. The attribute name is "viewBean".
So you can get the view bean name by doing the following inonBeforeRequest:
<HttpServletRequest>.getAttribute("viewBean");
But I suspect this is not going to solve your current issue.
You could add the target page name to the page session. If there ismore
than one possible target page, it might get a little more involved.
Let me know if the use of page session needs further explanation.
c
For more information about JATO, including download information, pleasevisit:
http://developer.iplanet.com/tech/appserver/framework/index.jspIf you want to stop a JATO request in its tracks, you have a little black
magic at your disposal: you can throw a CompleteRequestException. This
indicates to the JATO infrastructure that it should immeditately stop
handling the request, but not generate an error, as the develper has taken
full control. You can generally throw this error from anywhere, at any
point--it is a RuntimeException, and is "tunneled" through other exception
handlers where appropriate.
In your scenario, you want to check if the user is logged in, and if not,
save the target URL using the parsePathInfo() method. Then, forward to the
login page and then throw a CompleteRequestException.
Todd
----- Original Message -----
From: "nickmalthus" <nickmalthus@h...>
Sent: Monday, January 07, 2002 3:05 PM
Subject: [iPlanet-JATO] Re: onBeforeRequest(); Finding requested view from
requestContext
I guess what I am thinking about doing is capturing the requested URL,
i.e. /appname/modulename/RequestName. In the onBeforeRequest(). I
would then check to see if the user is logged in, and if not, set the
URL in the session(or page session of the Login bean) and forward to
the Login viewbean using the viewbean manager. Inside the login view
in the handleSubmit() method I would authenticate the user and then
get the URL out of the session (or pagesession). I would then
magically get the ViewBean/Command object for the URL or otherwise
"forward the request" as if the user had typed in
/appname/modulename/RequestName, which is the behavior I am trying to
acheive.
It turns out I cannot forward in the onBeforeRequest() as it will
output the viewbean and then continue to process the request which in
turn trys to do a RequestDispatcher().forward after data has been
written to the stream which does not bode well with the servlet
container. Thus, it appears I have no control of the request in the
onBeforeRequest() method. Is this correct?
In light of this new observation I am now going to create a base view
class that all views will extend from and override the
onSecurityCheck() method to forward to my login bean. If I can't find
any other way, I will get the URL from the page session and do a
response.sendRedirect() to the URL.
Thanks for the help!
--- In iPlanet-JATO@y..., "Craig V. Conover" <craig.conover@s...> wrote:
The problem is that you don't know what the target view is until it has
been forwarded to.
Think about it... the request handling view bean (or command object)has
the request handler that has the code that will ultimately forward to
another view bean. This is code that you have written. So, until that
forwardTo() is invoked, there is no notion of a "target page".
What you do know is which "page" (view bean) the request is coming from
(the handling view bean or command class). You can get this from the
HttpServletRequest. The attribute name is "viewBean".
So you can get the view bean name by doing the following inonBeforeRequest:
<HttpServletRequest>.getAttribute("viewBean");
But I suspect this is not going to solve your current issue.
You could add the target page name to the page session. If there ismore
than one possible target page, it might get a little more involved.
Let me know if the use of page session needs further explanation.
c
For more information about JATO, including download information, pleasevisit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp -
How to find which drivers are missing?
My laptop model no is Hp Pavillion dv6 1337tx. Someday ago I installed Windows 7 32 bit OS and also installed all drivers from the HP site. Still in the device manager I can see som drivers are missing. What can those be and how can I identify those missing drivers and solve this problem?
I am attaching a screenshot of the device manager showing some drivers are missing.
This question was solved.
View Solution.Your image has not yet been approved by a moderator.
Determining what the devices are is a one at a time process. On each unknown device or device without drivers, right click on the device and select properties. In the properties window select the Details tab and hardware ids in the property dropdown. Post the PCI\VEN string as seen in the following image for each device here in your post. Once that is done we can let you know what the device is.
This is where the drivers for your notebook are located. Do you know which chipset is installed?
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
Problem with the crystal viewer
Hi there,
I have a problem with thw crystal viewer. I have reports developped in Crystal XI that run in vb.net within the "CrystalDecision.Windows.Forms.CrystalReportViewer" object. On all computer client everything works fin except on one of them. When the print button is pressed, it gave a "Object reference not set to an instance of an object" error. Since this error is raised by the "Crystal report windows form viewer" preview window i have no idea why this occured. We tried to uninstall the viewer and reinstall it without chance.
The only thing i can tell is that this client use a "HP deskjet 3420 series" printer. that's the only difference there is on this computer. Anyone as an idea?
Thanks
BenHi Ben,
Try moving that printer to another PC and install the print driver. If it fails there it's likely a driver issue. HP and Cr has a history of problems. Mostly it's HP drivers returning the wrong memory structure size.
If you can find someone who is using Windows XP and Windows 2003 and see if either work. Or possibly plug the printer ina print server and see if that works.
Next option is if you wrote the software you are running run it in debug mode and see if it captures anything when printing. If did not write it then ask the person who did to test it also.
Next option if you want to dig deeper into the cause is go to Windows site and download a program called DebugDiag. Run this program and set it to capture crashes. It will generate a dump file which can be analyzed. It should tell you which API or function caused the crash.
Thank you
Don -
Problem with disabled code view
Hi,
I've a problem with a template-based website which works fine
in design view but will not allow edits in code view (with the
exception of the contents of the <title> element). The
template has multiple editable regions and has been deployed on
quite a few occasions to multiple authors with varying
configurations without any trouble before, but now it is causing
quite a bit of head-scratching!
The problem originally manifested in Dreamweaver MX 2004 on
Windows 2000. An upgrade to Dreamweaver 8 has taken place and the
issue persists. Testing on a similar computer using a standard
shared drive in Windows shows the same problem in Dreamweaver 8 but
was fine in Dreamweaver MX. Working with a copied set of files on a
remote computer (Win2k and DW MX 2004) seems to somehow resolve /
circumvent the problem and the code view works fine. Unfortunately
this isn't an option for the main authors of the site who have only
their current machines available.
The fifth post down in a
thread
over at DMXzone seems to refer to a similar problem, but the
workaround highlighted there has not worked for me.
I'm not really a heavy Dreamweaver user but I can normally
figure things out. This one however has got me stumped - anybody
got any ideas? (Apologies if it's a really simple setting or flag
that I should know about, but I've not been able to find anything!)
Cheers,
DanCa you post a link to the page, please?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"yorkdan" <[email protected]> wrote in
message
news:[email protected]...
> Hi,
>
> I've a problem with a template-based website which works
fine in design
> view
> but will not allow edits in code view (with the
exception of the contents
> of
> the <title> element). The template has multiple
editable regions and has
> been
> deployed on quite a few occasions to multiple authors
with varying
> configurations without any trouble before, but now it is
causing quite a
> bit of
> head-scratching!
>
> The problem originally manifested in Dreamweaver MX 2004
on Windows 2000.
> An
> upgrade to Dreamweaver 8 has taken place and the issue
persists. Testing
> on a
> similar computer using a standard shared drive in
Windows shows the same
> problem in Dreamweaver 8 but was fine in Dreamweaver MX.
Working with a
> copied
> set of files on a remote computer (Win2k and DW MX 2004)
seems to somehow
> resolve / circumvent the problem and the code view works
fine.
> Unfortunately
> this isn't an option for the main authors of the site
who have only their
> current machines available.
>
> The fifth post down in a
>
http://www.dmxzone.com/forum/topic.asp?topic_id=33748
> seems to refer to a similar problem, but the workaround
highlighted there
> has
> not worked for me.
>
> I'm not really a heavy Dreamweaver user but I can
normally figure things
> out.
> This one however has got me stumped - anybody got any
ideas? (Apologies if
> it's
> a really simple setting or flag that I should know
about, but I've not
> been
> able to find anything!)
>
> Cheers,
> Dan
>
>
>
Maybe you are looking for
-
Smart Card based ssl connection not possible with SunPKCS11 Provider?
Dear all We use jsse connections with file based Pkcs12 Keystores for longer time. Now we d'like to replace these .p12 files with SmartCards. While the jsse 5 reference guide suggests: "To use a Smartcard as a keystore or trust store, set the javax.n
-
I bought windows when I needed the Mac version, who can help me?
I accidentally bought the wrong for the wrong system - how can I get is exchanged?
-
Please tell me your idea about my manner of using proxy user
Hello Please say to me your idea about my manner of using proxy user , I don't know that my method is right , doesn't it has security weakness ? Let me to say what I wanna do : I want my application users authenticated by database , therefore in my d
-
Hi, When I add an UDF in the Marketting Documents -> Row/Title it appears in all the marketting related documents. How can I add it only for say AR Invoice. I tried defining Category for the user defined fields. But then I will have to do it for all
-
Why can't I see my template in Design view as it is?
Hi Guys A couple of days ago I noticed that my template which I use for my website, doesn't show correctly while working in design view. Quite annoying since I now constantly have to save all and view in Chrome or Firefox or... Does anyone know how I