Reg SAP HCM Process Change Position Attributes

Hi All,
I have copied the standard Form Scenario 'S_HR_PD_CHANGE_POS_ATTRIBUTES' into Custom one.
I have made only one step i.e. Stage02 (Process) and attached everything ISR Scenario,Form,Interfaces.
I have created one process and attached the form Scenarion and custome workflow to it. When I run the ASR_PD_PROCESS_EXECUTE from the SE80, I am able to get the selection scree,giving the position id,selecting my custom process and getting hte adobe form with all fields.
When I clicked on Personnel Area or Personnel Sub Area list button, am getting one pop up with the message 'Internet Explorer has stopped working' A problem casused the program to stop working correctly. Windows will close the program and notify you if a solution is avilable.
I am getting the same error when I tried with out copying the standard one.
Could any one please help on this.
Thanks in advance.
Regards
KP

Hi Siddarth,
Thanks for the response.
The Custom process is running fine and am able to get the F4 help too using the TCode  'hrasr_test_process'.
Still getting the problem while executing from SE80 as mentioned in the main thread.
Any suggestions are appreciated.
Regards
KP

Similar Messages

  • Integrate SAP ERecruiting Newhire/Rehire with SAP HCM Process

    How to integrate SAP ERecruiting Newhire and Rehire with SAP HCM Process and forms using SAP NetWeaver PI 7.3 , Could any one  give me steps or docs..

    I think standard content available in market place if no then try with Web service (sender side) and Proxy in receiver side,

  • SAP HCM Processes and Forms (WDABAP) - Implementation Cost

    Hello,
    As many companies are doing, right now we are defining budget for the next year.
    We expect to implement the HCM P&F based on WDABAP in the next FY but although we still don't have to much details on the feasibility or the scope, I need to provide an estimate cost of implementing the solution (licences, if applied, and consulting effort).
    Does anyone here already had the experience with the HCM P&F based on WDABAP and can share the metrics used to estimate the project cost?
    Thanks
    Daniel Kiel

    Well, First of all there are no licensing costs if you have already ESS/MSS, as Adobe P and F only requires licences Costs would come to be on how complex and how many forms you ll implementing? how many would be akin to standard and how much effort will they involve, these things will determine actual costs. refer here on the options you have, http://scn.sap.com/community/erp/hcm/employee-self-service/blog/2012/06/27/hcm-processes-and-forms-with-new-user-interface https://scn.sap.com/community/erp/hcm/blog/2014/03/18/hcm-processes-forms-why-pick-one-form-uiwe-have-options

  • How to start sap hcm process and forms in ess

    Hi,
    Here is the requirement for us i.e., employee (Role SAP_ASR_EMPLOYEE) has to initiate the HCM Process and Forms in the ESS. But as per the standard the possibilities are initiated by the Mangers and HR Administrators... How to solve it...
    Regards,
    Santhosh Kumar R

    Hi,
    Process can be initiated by the employees in the ESS. However you need to link your HCM P & F in the ESS l.The standard initiator role for the employee is 'HRASRD'.
    Try attaching this role in the role assignment section of the process.
    Regards,
    Aravind.P

  • BUS1065 - SAP HCM - Employee changes in infotype 0000 + infotype 0001

    Dear all,
    I have a problem with the customizing in order to recognize the changes in infotype 0000 + infotype 0001 for employees.
    What do I want?
    If there is a new hire, a rehire, a retire or a company-left action, I want to start ONE workflow in order to dispatch the employee data to several satellite systems considering the new validity dates.
    What happens currently?
    I maintain a rehire action through transaction PA40 and the system raises several events so that the workflow start multiply, meaning raises event hired, rehired, companyleft, ...
    My customizing:
    TCode: SWETYPV
    BO BOR-Objekttyp     BUS1065     COMPANYLEFT     WS91000007     0
    BO BOR-Objekttyp     BUS1065     HIRED     WS91000007     0
    BO BOR-Objekttyp     BUS1065     POSITIONCHANGED     WS91000007     0
    BO BOR-Objekttyp     BUS1065     REHIRED     WS91000007     0
    BO BOR-Objekttyp     BUS1065     RETIRED     WS91000007     0
    TCode: SWEHR1
    P     Person     0000                                                                      BUS1065
    P     Person     0001                                                                      BUS1065
    TCode: SWEHR2
    P     Person     0000     Maßnahmen                                        APP          100     BUS1065                                          CACS_LOG_HRINFTY
    P     Person     0000     Maßnahmen                                        DEL          100     BUS1065                                          CACS_LOG_HRINFTY
    P     Person     0000     Maßnahmen                                        INS          0     BUS1065                                          HR_EVENT_RULES_PA0000
    P     Person     0000     Maßnahmen                                        INS          100     BUS1065                                          CACS_LOG_HRINFTY
    P     Person     0000     Maßnahmen                                        UPD          0     BUS1065                                          HR_EVENT_RULES_PA0000
    P     Person     0000     Maßnahmen                                        UPD          100     BUS1065                                          CACS_LOG_HRINFTY
    P     Person     0001     Organisatorische Zuordnun                                        APP          100     BUS1065                                          CACS_LOG_HRINFTY
    P     Person     0001     Organisatorische Zuordnun                                        DEL          100     BUS1065                                          CACS_LOG_HRINFTY
    P     Person     0001     Organisatorische Zuordnun                                        INS          0     BUS1065                                          HR_EVENT_RULES_PA0001
    P     Person     0001     Organisatorische Zuordnun                                        INS          100     BUS1065                                          CACS_LOG_HRINFTY
    P     Person     0001     Organisatorische Zuordnun                                        UPD          0     BUS1065                                          HR_EVENT_RULES_PA0001
    P     Person     0001     Organisatorische Zuordnun                                        UPD          100     BUS1065                                          CACS_LOG_HRINFTY
    TCode: SWEHR3 (For testing purpose only one entry)
    P     Person     0000                                                                      INS          1     BUS1065     HIRED
    Can anybody tell me how I can customize our system so that the system raises only event hired for a new employee hire and e.g. companyleft event for a termination action?
    Thx you all in advance for your support!!!
    In case you need more information, don't hesitate to contact me!
    Kind regards,
    André

    Hi
    TCode: SWETYPV
    BO BOR-Objekttyp BUS1065 COMPANYLEFT WS91000007 0
    BO BOR-Objekttyp BUS1065 HIRED WS91000007 0
    BO BOR-Objekttyp BUS1065 POSITIONCHANGED WS91000007 0
    BO BOR-Objekttyp BUS1065 REHIRED WS91000007 0
    BO BOR-Objekttyp BUS1065 RETIRED WS91000007 0
    Iam not sure about what you have done in the customizing but, the above settings represents that the same workflow is set as receiver for different events.
    Now As per my understanding what ever you have posted, I feel like you want to restrict the workflow intiiation only for some of the events. and for the remaining events you do not want to start the workflow.
       If this is the case then I would suggest that to over come any kind of issues, I suggest you take a copy of the workflow WS9100000070 and assign the new workflow template to each different event, in this way you can differentiate which workflow is acting as a receiver for the event.
    and accordingly you activate the Event Linkages in SWE2 txn too.
    Regards
    Pavan

  • SAP HCM P&F : FPM Form List UIBB Table Width...

    Dear All,
    I am stuck with strange issue. In SAP HCM Process & Forms with FPM Form, when we use UIBB List layout configuration, how can we set the width of the table?
    During run time,table is displayed from left to right (column A-H) and all other form fields are from column A - G only, so the table looks very annoying.
    Any suggestion how can I set the width of the list layout table in FPM Form ?
    Chohan

    Dear Sahir,
    Thanks for reply as always.
    My setting for List UIBB is :
    and during run-time the list UIBB is shown like this, and I want its width equal to the above comment box' width.

  • Post Work Exp of 8 yrs+ in HR and now Career in SAP HCM Functional Consultant

    Dear Respected Members,
    Myself Abhinav Chandra , having a PG Degree in HR and a work experience of 8 yrs plus in HR Domain . At presently, I am associated as as Manager - Human Resources with India's 2nd largest Steel Manufacturing organization . My organization is planning to implement SAP HCM module in this May 2015 and I am designated with the responsibility for its implementation in my organization .
    Pursuing a career in SAP HCM was always my dream since 3 yrs when had a refresher training in SAP HCM domain in 2012 . Now my question is if after gaining a SAP HCM Implementation experience and a SAP Certification with core HR exp of 8 yrs , how will it benefit in making a career move in SAP.
    Request you all kindly update with your desired suggestions.
    Thanks and Regards
    Abhinav Chandra

    Hi Abhinav,
    First I am very glad to hear that you have sound domain knowldge in HR. So for a person like you SAP Implementation experience will be fantastic advantage. Off course if you wanna do certification on SAP HCM that you can always do but for a person like you who has already sound domain knowldge if you add SAP HCM Implementation experienece in your bucket you are done.
    You know the respective HR Processes so thats a big advantage. However following steps would be good for you:
    Participate in Requirement Gathering workshop
    Participate in Design Process and finalise the design
    Try to know the SAP Configuration to some extent
    Involve in SAP HCM Process testing
    Good amount of involvement in SAP Authorisation issues as well.
    Thanks & Regards
    Subhasish

  • HCM Process and Forms Position Change Workflow Rejection

    Hi Experts,
    I am new to HCM Process and Forms workflows and have a simple query here.
    With the conventional workflows (PR/PO) when Approver Rejects a workitem we send a notifcation to the INITIATOR and when he changes the PO/PR the workflow gets triggered via CHANGED EVENT.
    However, here in POSITION CHANGE workflow when an approver REJECTS it at any level HOW WILL I SEND BACK THE FORM TO INITIATOR SO THAT he does the suggested changes and submits for RE-APPROVAL.
    Idea is to avoid the burden of filling all the fields everytime
    Please guide me on this.
    Thanks a lot
    Rgds,
    Lakshmi

    Hi,
    If a change method doesn't exist you can create a new one where you can use a Call Transaction sentence that redirects to a tcode where you can modify the form.
    Regards,

  • Hi i have 50 infoobjects as part of my aggregates and in that 10 infoobjects have received changes in masterdata.so in my process chain the Attribute change run in running for a long time.can i kill the job and repeat the same.

    Hi i have 50 infoobjects as part of my aggregates and in that 10 infoobjects have received changes in masterdata.so in my process chain the Attribute change run in running for a long time.can i kill the job and repeat the same.

    Hi,
    I believe this would be your Prod system, so don't just cancel it but look at the job log. If it is still processing then don't kill it and wait for the change run to complete but if you can see that nothing is happening and it is stuck for a long time then you can go ahead and cancel it.
    But please be sure, as these kind of jobs can create problems if you cancel them in the middle of a job.
    Regards,
    Arminder Singh

  • How to Change Column text of Iview HCM Process Overview

    ECC Ehp4 sps7
    Portal 7.01 sps7
    Please Help,
    I am trying to globally personalize the Copy of the Iview HCM Process Overview . The column texts have titles such as Object Type and Object Key. I want to rename them Person ID etc.
    I was able to "Hide" some columns in the Iview but when I change the text in the "Settings for Current Configuration" it does not Appy or change the Display.
    I am in the Portal Content Administrator, with Admin priveledges. I am opening the Iview objecyt then using Preview.
    I then Right cntl click to bring up the Settings for Current Configuration. I am looking at the View UI Element Tree and opening the Grouping of UI Elements. I see the text for the column "Object  Key" I change the text but when I save it does not change the Iview text. When I open the "Settings for Current Configuration again the changed text is still there but the Iview has not changed
    Any help on this matter would be appreciated.
    thank you,
    Sarah

    Yes,
    I have opened the Role object, edited the Work Overview Page inside the role, selected / clicked on the Iview HCM Process Overview, opened the IView  HCM Process Overview, previewed it, cntl right click for Settings for current configuration,
    Selected the UI Element "Object Type" TEXT and made my changes
    Sarah

  • Creating a new position and updating IT 1028 using HCM processes and forms

    I have to create a new position and update the related infotypes using the design time framework of HCM processes and forms. The problem I am facing is the info type 1028 is not a part of the de coupled infotype framework and does not appear in the service fields list. How can I update the infotype 1028? I was thinking of updating it using the FLUSH method of the class implementing the ADV services interface IF_HRASR00GEN_SERVICE_ADVANCED by calling the function module RH_INSERT_INFTY. But, how do I get the position ID created? Is there any other way of achieving this? Please help as soon as possible.

    HI
    Create one Function Module to return all the vacant positions and load that in a drop down.
    For IT1028 you have to update via the RH_INSERT_INFTY.
    Kind Regards,
    Mukesh

  • HCM Process and Forms - Clarification required reg BADI QISR1.

    Hi all,
               I want to have some extra validations done on some of the fields of my HCM Process Adobe form. For this, I created a new implementation for the BADI QISR1 with filter value as my Custom Scenario and implemented the method INT_SERVICE_REQUEST_CHECK. Validation is working now, but, it's not updating any data to the back end after I submit. When I checked, I found that SAP has written the whole logic to update the data to the Infotypes in another Implementation of the same BADI,which was like the Default implementation. But, that implementation is not getting triggerred now, as I have a new one now.
    Do I have to copy the whole update logic to this Implementation now? Or is there any other setting for this?
    Kindly help me.
    Regards!
    Mahesh

    Not sure I follow you here, but here's some basics.
    For any backend updates to infotypes, you should use the standard services SAP_PA, SAP_PT and SAP_PD (if on EhP4).
    In some case, this won't work. So you have two choices:
    (1) write and advanced generic service to handle this (difficult and no examples from SAP)
    (2) write custom code triggered in workflow to do this (such as a custom function module) to handle your updates (past EhP2, you have to use the same classes as the decoupled framework uses....not the good ol' "infotype operations" standard FM).
    Now, as for validations, you can handle those separately. In fact, talk about timely! (haha) I just posted a blog on this just now. =)
    /people/christopher.solomon/blog/2009/06/22/hcm-processes-forms-required-fields-arent-what-they-use-to-be

  • HCM Process and Forms - Changes to Form Issue

    We have a scenario within HCM processes and forms where the changes being made by an intermediate approval step is not being sent to the next level approver.  For example, in a pay change the initiating manager sends the pay change to his/her boss for approval, then once approved the form is sent to HR for final approval and update into R/3.
    In this scenario the initiating manager starts the process and makes appropriate updates to the form (including comments).  This then routes to that manager's manager for updates/approval.  When processing the form, the approving manager can see the information input by the initiating manager.  The approving manager then has the opportunity to make appropriate changes within the form and add comments before it is approved and sent to HR for final approval.
    Once the approving manager makes changes and sends this to HR, when HR processes the form they see the changes as if it was sent by initiating manager (HR does not see the changes made by the approving manager).
    I appreciate any insight you may have on this issue.
    Regards,
    Brad

    Sounds like you process is designed incorrectly and your are having problems with your process object integrity. You need to be careful with loops/branches when designing your process. Are you doing it all in the same Form Scenario and just using multiple steps? The form scenario will "share" the "data" hence you can have issues. You can split it to a differnt form scenario and pass the data over from the other FS to your FS. Then you know you will have your own data there. I often see people trying to do their whole process within one form scenario and use multiple steps without realizing the data integrity issues with that.
    Hope this helps.

  • SAP Script :change position of window margins (resize window)

    Hi,
    how to change position of window margins (resize a window)?
    Sounds very simple, but when I open my SAPScript form in layout editing mode it does not allow me to change values of window margins...
    Regards,
    Mindaugas

    Hi...
    Make sure your entering language and orginal language of the script is same or not.
    utilities -> convert orginal language..
    Procedure if you are using English as entering language:
    Enter script name -> Enter language as DE -> change -> utiliteis -> convert orginal language -> change it DE to EN -> now back and re-enter into script...
    Thanks,
    Naveen.I

  • SAP HCM Support Function reg

    Hi All
    I have 4 Years of Experience in SAP HCM End user support and I also got a job offer for SAP HCM Support from one of the big company.
    If I continue my career in SAP Support what will be my future career, whether is there any big career opportunities available in future for Support function.
    Please suggest your views
    Thanks

    I agree with Colleen,
    There is a general perception among many that Support project work is degrading, boring, monotonous, non-challenging, lack-of-learning-opportunities etc.
    Those who say this, have actually no real work experience or are ignorant of world they live in. A support project is as important as an Implementation or a Roll-out project. Most Implementation and Roll-out projects are a 100m dash to the finish line. No one is bothered whether you flew or limped to the finish-line - as long as you completed the run within a decent timeline. The real challenge of Support project is in fixing a hurriedly set-up system without taking into consideration future performance or sustainability. These points have been discussed many times(even recently).
    Even if the above reasons don't excite here's one more. All Implementation/roll-out projects are short term and you'll end up searching for projects within months of beginning one, whereas Support projects are long-term and hence give you more stability and reassurance of steady revenue.
    pk
    PS: And this comes from a person who's worked in Implementation/Rollout/Upgrade projects for 70% of his total SAP project experience.

Maybe you are looking for