Reg. tips during configuration

Dear Experts
As a MM consultant what are the thinks to be followed during configuration.
And what is meant by " roll out project".
Please explain.
Thanks
Rajakumar.K

When Parent company have the SAP implemented and the management wants the SAP implementation for the New company(like in the case of Merger & acquisition or new company setup with different business.) in that case
consultant use the parent company's organization structure and with little modification in the configuration implement the SAP. That project is called as the Rollout project.
You can take Example of hul (hindusthan unilever limited). At First hul has implemented SAP for 4 palnt and later they extended SAP to all the Remaining plants with different business processes thru Rollout.
Explain about Roll Out Project

Similar Messages

Error during configuration process while installing obiee 11.1.1.7.0 in windows server 2012

HI..
I'm having an issue while installing obiee 11g(11.1.1.7.0) in windows server 2012 and using the database as ms sql server 2008. During configuration process after the installation process is completed , here the process is stopped at "Step:executing opmnctl start configuration_obisch1" status "failed"
Here is the error:
Error
    opmnctl task failed
    Step Executing: opmnctl start coreapplication_obisch1 failed
    Configuration Action "Executing opmnctl start coreapplication_obisch1 " has failed. please check log files...
any help would be great
thanks..

Friend,
Installer file size is:
Size: *1.23 GB (1,323,085,837 bytes).*
Size on disk: *1.23 GB (1,323,089,920 bytes).*
I tested also disabling antivirus on my PC and disconnect the power cord before starting the installation of JDeveloper. In both tests the result was the same.
Some additional recommendations to solve this case.
Thank you for supporting.
Edited by: Luis_vkacito on Nov 15, 2012 6:48 AM

Automatic comm channel when assigning Business system during configuration

Hi all,
In scenario file to file during Configuration,
During assigning business system there is a check box:
<b> 'Create communication channels automatically' </b>
I am planning to use File adapter on both receiver and sender side..
The question is Do I check this box or not ? If I do check this box it creates for me HTTP adapter ...Do I need it or not? I am clearly only using file adapter
thanks all !
Jon

U cannot use it in ur scenario. This function is supported for the following adapter types:
- XI Adapter
- HTTP Adapter
- IDoc Adapter
- RFC Adapter
See this
http://help.sap.com/saphelp_nw04/helpdata/en/42/d1a4d665c5574fa6e19784358ec948/content.htm
Regards,
Prateek

Add user validation in create user form during Configure User Object Classe

Hi friends,
I like to add a user validation code (javaScript or PL/SQL) into create user form during Configure User Object Classes.
Is any way to pick user information and role assignment for validation in Portal side?
or pre event in OID provisioning befor loading LDAP?
We like to make a rols assignment validation. But portal does not have this function.
TOM, Any suggestion?
Thanks!!

after study, portal form --LOVGroupSearch take a role search and display user name for select role.
Who know we are can find system object LOVGroupSearch in portal or OID?
the source SCR as /oiddas/ui/oracle/ldap/das/search/LOVGroupSearch?title=Role%3Fredirect=/oiddas/ui/oracle/ldap/das/search/LOVGroupSearch%3Ftitle=Role
When we search a role and added it. selected role appears in form Search and Select:.
When click role name in Search and Select form. system will display Group Members and group owner.
Who can find behind codes for this form or samilar pl/sql codes?
Thanks!!

Problem during configuration of webutil

My Dears;
during configuration of webutil
when I sign the jar file
I Write as C:\DevSuiteHome_1\forms\webutil\sign_webutil C:\DevSuiteHome_1\forms\java\frmwebutil.jar
in cmd
it give me like this
http://www14.0zz0.com/2010/11/08/06/734584338.jpg
what is the reason for this error
I try more but....
I remove oracle before but also no good
plz help me
Thanks In advance

GO through this thread it has similar issues ...
WebUtil Demo Runtime "Bean not found" Error

CS6 SetUp Freezes during Configuration

I'm installing 64bit CS6 on a Lenovo M51. (4GB - 64bit)
Getting setup to start took a few tries but I got it to run. Now it's stuck at one point during configuration. Any suggestions?
Thanks in advance,
Randy Schirmer

Hi Randy,
What product specifically are you trying to install?
General recommendations:
Wait a while on this configuration screen, maybe its working but just taking a long time?
Disable any anti-virus or security software which might be running in the background and try running the installation again.
Try starting the setup by right-clicking on the installer and choosing Run as Administrator
-Dave

TS1398 During configuration I cannot access wifi to continue

During configuration I cannot access available wifi to continue

Then connect to your computer via USB and setup the iPad that way.
Do other devices successfully connec to the network?
Try powring off and then back on your router.
iOS: Troubleshooting Wi-Fi networks and connections
iOS: Recommended settings for Wi-Fi routers and access points

Web client configuration assistent failed during configuration

Hello,
I am trying to install OCS on RH ES 3.0.
Infrastructure, Information storage and middle tier are on the same machine.
During middle tier installtion , i have selected following components at a time oracle files,oracle calender assiatent, web conferencing, portal.
But during configuration "webclient configuration assistent" and "infrasturucture phase 2 assistent" failed.
can anyone help me, for solving this problem ASAP.
Thanks and Regards,
Sarita

It would help to know which release you are installing? for general help, please look at the install guide or the OCS admin guide.

HT1338 os x 10.5.4, update search, updates to 10.5.8, downloads, restarts, freezes during configuration. i'm not a techie, please answer a fix for this layperson.

after a software update search an update is found, it is downloaded, restarts computer, but during the configuration it freezed at about 15% done. how can i update? i'm a non-techie.

Some general advice on updating Leopard:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site.
The Combo updater of Leopard 10.5.8 can be found here:
http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious! In fact a second restart can be recommended.
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a week or two while you regularly check their websites for updates.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
[b]If you are updating Safari (or just have):[/b]
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
/Library/InputManagers
~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).
Solutions for troubleshooting installation, startup, and login issues in Mac OS X v10.5
http://support.apple.com/kb/TS1541?viewlocale=en_US

Reg:error during transfer order creation

hi,
after quality inspection i move the stock into warehouse integrated storage location. if i clear inspection lot in qa32 for a material after saving it will pop up express message"error during creation of transfer order for a material".i configured that after qc inspection automatic TR is created.i just proceed with manual.
its a issue related with workflow or configuration....i checked with automatic TO all the things are deactivated.....where i am missing
Thanks
Muthuraman.D

hi,
goto VOV8
choose your sales order type
transaction flow - variant (remove the transaction variant if any)
but this will remove the transaction variant(custom) which you created , it will take the standard variant for your transaction VA01
regards
senya

Error during configuration of Sender Mail Adapter

Hellow All,
I was trying to configure Sender Mail Adapter and I am getting this error.
<b>error occured: exception caught during processing mail message; java.io.IOException: unexpected greeting response; read 220 mailrelay2.lntinfotech.com ESMTP Service (Lotus Domino Release 6.5.5) ready at Fri, 14 Jul 2006 16:11:29 +0530</b>
Can anybody please suggest me why this error is occured and how to solve that?
I am waiting with points, come on
Thanks in advance,
Sugata

HI,
1)Try to do with POP3
2)Check the URL , give correct Exchange Server Name/IP address.
3) Hope you have access to read the inbox (sometimes it will not be there)
Than try it.
Regards.
Moorthy

Mac unable to locate HP ENVY 5532 on network during configuration - device not reachable

I have MacBook Pro with OSX 10.9.5 and HP ENVY 5532. I have had it set up and configured for over a year but have always had a problem with scanning. Today after becoming frustrated that the scanning capabilities no longer worked, I found another thread which suggested re-installing the HP drivers and software here. http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/Scanning-from-HP-ENVY-5532-to-Mac-with-Yosemite-operating/td-p/4819461 So I did a full install of the drivers but now the mac cannot even connect to the printer at all during the configuration process. I had been prompted to connect the USB to the printer if the device was not picked up during the configuration process, so I did that. However the printer cannot be reached by the Mac.   But I can see that the printer has sucessfully connected to the network. I can see it on the network which I log into the router and I can access it via it's IP address.   The printer is connected to the correct network.  I have also noticed that the printer itself is showing as a separate wireless network. I have no idea how this happened as I had been trying to do so many things to fix the scanning capabilities in the first place I may have somehow inadvertently set up this network!! Could the printer itself as a network be causing these problems?   ANy help would be appreciated.

Hello,  I had already re-installed the drivers from the HP website as shown in the link, so I went to the steps as below. Also the router I have has always worked with the printer before (not the scanning capability) but the printing has worked. So does this mean that it supports Bonjour as I have no manual?  These are the steps I followed: On the step to Print a Network Configuration Page, the network settings need to be checked . It asked to review the following Review the following sections on the test page.No Filtering: Pass or FailPass: There is no MAC filtering preventing communication between the printer and the router. No action is required.Fail: There is a MAC filter preventing communication. Refer to the router manual or contact the router manufacturer for steps on disabling MAC filtering.
My problem here is that I do not see any section on the test page for No Filtering but everything else appears ok.  In the next section Option one: My test page shows the correct SSID and a valid IP address when i get to step 5: Click the plus sign () at the bottom of the left pane. NOTE:Make sure that the printer kind is Bonjour or Bonjour Multifunction.  First of all there is no printer to choose from and secondly I see no option to ensure that the kind is Bonjour or Bonjour Multifunction     After clicking the + icon, you can see no printers are shown,  I think it is probably not much use to me to to do anything further right now until I see what feedback I can get from you.  IN the meantime, I will contact my internet service provider to make sure that the router they have supplied supports Bonjour.  I have tried to add the printer manually using the IP address and managed to print a page. It shows as following   However I am not able to scan. Have you any ideas what is going on? is this something to do with Bonjour? Best RegardsNuala

RWD error during Configuration of RWD Server: Object Required webservice.js

We are in the process of Configuring the Server - after installing the Autonomy IDOL/DISH and the RWD Server. We get to the point of entering Company Name - and Product Key, as soon as we click on SAVE we get the error message
Object Required                          Line 43 - Character 13
webservice,js
==========
Need help Thank you!
Guillermo Gomez

Since we are using 64 bit application the ASP.Net file needs to be forced to use 32 bit because RWD sometimes does not recognize the file during the installation process.
1. Ensure the uPerform Website points to use port 80 and the Collaboration Server to use port 8080. This can be verified or change by executing the AuthenticationWizard.exe file located in: <InstallPath>\Collaboration\WWW\uPerformWS\ms
-Click on Start u2013 verify or change the information as needed and ensure the Server DNS Hostname does not have 8080 at the end.
2. Set the permissions to full rights for all users for the file RWD.uPerform.ServerConfiguration.DLL u2013 located in: <InstallPath>\Collaboration\WWW\uPerformWS\
3. Delete the VCBS folders in
<InstallPath>\Collaboration\webapps\
Re-Start IIS
Once is back up:
-     Make sure Web Service Extensions is using ASP.NET v2.05727 (32-bit). Remove or prohibit any other ASP.NET.
-     Make sure Jakarta Connector is set to allowed if not create a new connector to point to file <InstallPath>\Collaboration\JKConnect\bin\isapi_redirect-1.2.14.dll
-     Make sure WebDAV is set to allowed
Inside the websites (iis) right click on uPerform Collaboration and click on properties. Display the tab ISAPI Filters and make sure Jakarta is there and in black font. Any other color (RED) indicates is not connected and you need to delete it from the web services extensions and then add it back in this section u2026 same file location.
Re-Start IIS
Once is back up:
Re-register ASP.NET by executing this file from the command line:
C:\windows\microsoft.net\framework\aspnet_regiis.exe u2013iru
Once this is doneu2026 then do:
C:\windows\microsoft.net\framework\aspnet_regiis.exe u2013ir
Re-Start IIS
Ensure the website is back up u2026 and continue with the configuration of the RWD uPerform Server.

Watching price condition in sales order during configuration product

Hello evrybody,
I have a little question about product configuration during the sales order creation.
I have done all my configuration structure and I have add prices on certain characteristics.
However, I would like to see the price of each value of characteristic when I click on the matchcode to select the component what I need (column Condition scheduled to dysplay "Pricing information on a value").
Can you help me please ?
Thanks a lot for your help !!!
Thierry

Hi Rieu,
I believe you are referring F4 to display the prices values instead of the conditions. You need two notes to avail the functionality. Notes 1259021 (VC ) and 1267335 (SD). If you want the values to be shown then please ensure that c_condition_price is set to X in INCLUDE LCEI0FS4
Regards
Amber
SAP Support

ORA-00001: unique constraint during "Configure Database Security Store for OIM Domain"

Hi Guru's,
I am following the below steps for OIM 11.1.2.1 with SOA 11.1.1.7 Installation and facing below error during step "Configure Database Security Store for OIM Domain".
Installed Database 11.2.0.3
Installed RCU (Here I used two versions.
RCU 11.1.2 - Used IDAM prefix for (Metadata Services, OPSS, OIM)
RCU 11.1.1.7 - Used SOA prefix for(Metadata Services,SOA Infrastructure, User Messaging service)
Installed JDK 7 (Java 1.7)
Installed WL 10.3.6 (MW_HOME-/u01/Middleware/fmw, WL_HOME=/u01/Middleware/fmw/wlserver_10.3)
Installed FMW 11.1.2.1 for OIM. (ORACLE_HOME=Oracle_IDM1)
Installed FMW 11.1.1.7 for SOA (ORACLE_HOME=Oracle_SOA1)
WL Domain creation. (Domain Name – idam_domain1)
Configure Database Security Store for OIM Domain.
Internal Exception: java.sql.SQLIntegrityConstraintViolationException: ORA-00001: unique constraint (IDAM_OPSS.IDX_JPS_RDN_PDN) violated
Also followed the below bug solution, but issue still occurs.
Bug 16690836 : CONFIGURE DATABASE SECURITY STORE (CONFIGURESECURITYSTORE.PY) SCRIPT IS FAILING
@ 1. Delete the Schemas using RCU.
@ 2. Recreate the OAM schemas.
@ 3. Reinstall the WLS and OAM software.
@ 4. Run config.sh to create a new domain.
@ 5. Run setDomainEnv.sh from user_projects/domains/<Domain_name>/bin
@ 6. Run the configureSecurityStore.py from same window.
Not sure if anyone tried with different steps that fixed the issue? Could you please help.
Thanks
VG

Hi Gurus, I got the solution from Oracle. SOA 11.1.1.7.0 shouldn't be used with Identity Management 11.1.2.1.0(11GR1-PS1) version. Identity Management 11.1.2.1.0(11GR1-PS1) is bundled with SOA 11.1.1.6.0. When used this SOA version, Installation went smooth. Thanks VG

Reg. tips during configuration

Similar Messages

Maybe you are looking for