Reg : User status information is not updating in Cube

Hi Experts,
I am loading data to INfocube which gets data from sales order ODS and Master data infoobject PROJECT which has project code. User status is a attribute fo Project (Master data infoobject). 1 WEEK before user staus was changed for a particular Project code in source system ECC system .If i display data in Master data PROJECT ,I could able to see changed user staus for that particular Project code.
Later data loaded to cube from Master data and ODS.If I select a particular Project code and give a sales document number and try to see user status which got changed ,it is not showing changed User status and values are not showing in Infocube.But when i try for another project code its showing correct User status in INfocube.
Kindly guide me to solve this issue.
Thanks in advance!

ACR for Master data load was happend already and we can able to see changed user status in Master data.
But we are unable to view user status ,SALES document values for that particular project code. Sales document is extracting from ods.

Similar Messages

CRM user status in delta not extracted

Hi,
In the delta load of datasource 0CRM_SRV_CONTRACT_H the custom added user status fields are not filled.
For extracting CRM (5.0) user statusses of Service Contract Business Transactions to BW (3.5) I did required CRM customizing in SBIW and appended extraction structure with fields and did Bdoc mapping in BWA5 (customizing CRM_BWA_MBDOC BAdI not required according SAP user status logic). The custom user status fields are defined as BWSTONExyz.
Full load works fine, but in delta load the user status is not filled. It appears that the delta messages in the delta queue (RSA7) do not contain the user status, even when the delta is triggered by a user status change only.
Has anyone an idea what the problem can be? Or better: how to solve?
Thanks in advantage!
Kind regards,
Marinus

Note 793986 may help (at least in my case, even parallel processing is not used!).

User Profile email address not updated on Site Collection User Information

Hi All,
Ok here we go....SharePoint 2007 with SSP profile sync not enabled, however I have a few profiles I need to update (email address). This has been completed by editing the user profile in SSP, but when viewing the information via Site Collection >
People & Groups > User Information "Work E-mail" is still showing the old one.
All alerts are still being sent to the old email address, SSP DB UserProfile_Full shows the new email address as per SSP.
Anyone know where else user profile emails are stored which is used by Exchange?
Many Thanks, Roger

As per the following post from GuYuming
http://social.technet.microsoft.com/Forums/sharepoint/en-US/319d5b0e-336a-4815-9ee5-5d1685db867f/how-to-send-sharepoint-alerts-to-users-on-different-domain?forum=sharepointadminlegacy
After the email address in SharePoint user profile is updated to [email protected], you have to wait until
they are synchronized into the user information list in SharePoint site collections so that alert can be sent to that address. For detail, please read http://vspug.com/mirjam/2009/06/17/user-profiles-and-the-user-information-list-or-userinfo-table/ and http://blogs.technet.com/paulpaa/archive/2009/10/01/user-profile-information-not-updated-on-site-collection-s-people-and-group.aspx
--Cheers

Billing status in delivery not updated for free-of-charge flow

Hi,
I have a free-of-charge flow: sales order-delivery-invoice. The invoice has the net value 0 and do not goes in accounting. The problem is that the billing status in delivery is still "not invoiced" and because of this i can make more invoices for the same delivery/qty. Why the status in not updated? The item categ is relevant for billing (A).
Thanks.

You can refer SAP Note 33258 - Processing free-of-charge items.
Where they talk about Item cat setting, use of Cond Type R100.
Regards
JP

Account Information Does Not Update

I'm starting to get aggravated. I've received a new credit card and have moved. When I go to my account information and update my credit card information and address, then click done, it should save right? I then try to purchase a song. Which prompts the error rerouting me to my billing information to "verify" it's correct. For my protection I imagine. More like, to create a huge pain in my a$$ really because when it reroutes me to my account info none of the changes I made are there. So after going through the process on and off for about 3 months now I htought I'd beat the system and just use a gift certificate. So I purchased a 100 dollar gift certificate and credited my account. And even still when I go to purchase a song it says my billing info has changed. Well no $hit. So I deleted any credit card information from my account by choosing "none." Then clicked Done which lead me to believe iTunes would default to using the $100.15 credit on the account. But oh no! I get that stupid error saying things changed, rerouted to the account info, and all my old stuff is still there. So I thought to myself, this is rediculous... I'm just going to try creating a new account. Sure enough that worked. My new credit card info is saved, new address is saved, etc. BUT there's a huge problem with that... a)I don't want to use that email address or that account I was just testing it out because I'm going insane thinking I'm entering my credit card info or address wrong (which has been proven to not be the case) and b)my $100.15 credit is on that other account so I'm out $100! I've tried sending an email to support asking what to do and they replied to download the new iTunes and re-enter my account info... well hum, do you think I didn't already try that? Guess what, it didn't work. And why doens't apple have a phone number to support anywhere on their website. This is absurd! If anyone has experienced similair problems and have gotten it fixed can you please shed some light?
Thanks,
Angelita
hp pavilion a749c Windows XP

hiya!
Thanks for the phone numbers but that still doesn't resolve the real issue at hand. My question is regarding iTunes... and account information not updating.
Thanks!
(puzzled look) just checking ... are you actually thanking me, or complaining about my reply? i'm finding it extremely difficult to tell.
confused, b

I have set up iCloud control panel 3.1 for Windows 7 but when I add a contactact on my PC the information is not updating my iPhone and sames hold true for my calendar. Any suggestions?

I have set up iCloud control panel 3.1 for Windows 7 but when I add contacts on my Windows 7 desktop it is not updating to my iPhone 5 and the same holds true with my Calendar. Any suggestions? Thanks

The version that came with Microsoft Office Home and Business 2010 and says Version 14.0.7106.5003 (32 Bit) and the e-mail I have set up as POP / SMTP. Thanks for your reply.

User Status dont wan't update ( Urgent )

dear all,
i have some problem with status in nofication.
the case is :
The key user do the transaction with Tcode DNOTIFWL to change status with Complete Status than save the transaction.
and then, the key user do the transaction with tcode CRM_DNO_Service_Monitor, if we display the notification status still Customer action, basiclly the key user aleardy change the status on notification to the complete, with transaction DNOTIFWL.
my question is, how to fixed the problem with user status ?
thanks for your help
rgds
echo

Hi Liam,
In the Program MV45AFZZ in the FORM userexit_save_document
you use the following fn module to change the user status
'STATUS_CHANGE_EXTERN'
Example
IF t180-trtyp = 'H'. "Only creation time
READ TABLE xvbap WITH KEY matnr = c_matnr.
IF sy-subrc = 0. "If above material exist then change status
 LOOP AT xvbap WHERE cuobj NE space
 AND matnr = c_matnr.
 l_objnr = xvbap-objnr.
 CALL FUNCTION 'STATUS_CHANGE_EXTERN'
 EXPORTING
 objnr = l_objnr
 user_status = 'E0013' "Send ej IDOC
 set_chgkz = 'X'
 EXCEPTIONS
 object_not_found = 1
 status_inconsistent = 2
 status_not_allowed = 3
 OTHERS = 4.
 ENDLOOP.
ENDIF.
sy-subrc = 0. "Restore the previous condition
ENDIF.
Reward if helpful *********

ECM EHP4 - status of IT759 not updated when manager approves

Hi, we are implementating ECM on EHP4 and are having issues in the planning overview iview. when a planning manager approves an org unit, the status of IT759 for the employees it not being updated from submitted to approved. I have checked the user interface config and we have the tick box checked for allow approval process.
Also, once the org unit is in approved status, we cannot reapprove. I have tried using PECM_ADJUST_0759 - Adjust Compensation Process Records , to reopen the approved org unit and reinitialise but this does not work.
does anyone have any ideas?
Thanks Tanya

Hi Tanya,
Use PECM_CHANGE_STATUS to reset the 0759 records from Approved or Submitted back to In Process. Or the other way around. Very useful transaction.
As to your first question, from your description you are having the planning manager Approve the proposed pay changes. Normalthe planning manager will Submit and then a higher level manager will Approve or Reject. We used a separate area for the Planning vs. the Approval/Reject step. Only proposals in Submitted status are available for Approval/Rejection.
We are removing that process this year as we had the same problem of always resetting. So we just allow the adjustments to remain In Process throughout the review period. Then use PECM_CHANGE_STATUS to move to Submitted, Approved and Activated.
Paul

Reconcilation woking, status of RO not updating

Hi,
Am performing the target recon, recon working fine.
Following typical case I have issue
-before running the recon (for example RO is: ABC), same RO (ABC) is in provisioning state for the user.
-After running the recon, reconciliation event linked but RO (ABC) still in provisioning state and process form updated (old).
It should be create a new RO as provisioned, here in my case it updating the existing one.
Thanks,
anwar.

To make the resource object status to 'Provisioned'. Do the following
1. Go to your process defination associated with the resouce object.
2. Select 'Reconciliation Insert Received' Task and Double click on it. It will open window.
3. From that window, select 'Task Status to Object Mapping' Tab, then it will display various status and categories. For Completed Status, select Object Status as 'Provisioned'.
This is will solve ur problem.
Thanks.

Goods Movement status of delivery not updated from C to A

Hi
I am facing a peculiar problem.
We reversed goods issue using VL09 however the goods movement status of the delivery has not been updated. The GM status is still showing C- Completely processed.
If we are trying to repeat the process again thinking that reversal has not been done using VL09 for that particular delivery error message is displaying already the goods reversed.
Here we are missing the link. Though the goods reversed status has not been reflecting in the delivery.
Regards
Maruthi
Edited by: MARUTHI RAM on Apr 18, 2009 1:25 AM

1) First check in MB51 with movement type 602 whether you could see the delivery reference
2) Next go to VOV7, select your item category and see what is maintained for the field "Completion Rule". It should have been "B".
3) Next go to VTLA, select the item category for the combination of your order type and delivery type and see whether you have maintained "+" for the field "Pos./neg. quantity"
thanks
G. Lakshmipathi

Wmii status bar code not updating.

I use the wmii tiling window manager and its status bar abilities. The status bar all works fine except the section for getting the CPUMhz (CPU frequency). It does not get updated properly every 2 seconds as it should.
My code is here:
# Status Bar Info
status() {
echo -n 'CPUTemp:' `expr $(sensors | grep temp1 | awk '{print $2}' | cut -c2-3) + 15` '|' 'CPUMHz:' $(cat /proc/cpuinfo | grep MHz | awk '{printf "%.0f\n", $4}') '|' '/home:' $(df -h | grep sda5 | awk '{print $3}') '|' '/:' $(df -h | grep sda1 | awk '{print $3}') '|' 'RAM:' $(free -m | grep -i /cache | awk '{print $3}') 'MB |' $(uptime | sed 's/.*://; s/,//g') '|' $(date +"%a %b %d %H:%M")
If anyone can point out my mistake it would be greatly appreciated.

Are you sure that the CPUMHz is causing your problem? When I do
$ sensors
on my machine, I get 2 lines containing 'temp1'. If that is happening on your machine, then the `expr $(sensors ...) + 15` of your CPUTemp part will not work as you expect.
Other than that, I don't know what is causing your problem, but you could replace
...'CPUMHz: ' $(cat /proc/cpuinfo | grep MHz | awk '{printf "%.0f\n", $4}')...
with
..."CPUMHz: $(awk '/MHz/ { printf "%.0f", $4}' /proc/cpuinfo)"...
If that doesn't help, you could try
..."CPUMHz: $(( $(</sys/bus/cpu/devices/cpu0/cpufreq/cpuinfo_cur_freq) / 1000 ))"...
although on my system, that file is readable only by root. I don't know why it is set up that way.
You could also break up that long line so that it is easier to read.
status() {
echo -n "CPUTemp: $(( $(sensors | awk '/temp1/ {print $2}' | cut -c2-3) + 15 )) | "
echo -n "CPUMHz: $(awk '/MHz/ { printf "%.0f", $4}' /proc/cpuinfo) | "
echo -n "$(df -h | awk '/sda[15]/ {printf "%s: %s | ", $6, $3}')"
echo -n "RAM: $(free -m | awk '/\/cache/ {print $3}') MB | "
echo -n "$(uptime | sed 's/.*://; s/,//g') | "
echo -n "$(date +"%a %b %d %H:%M")"

Host Information is not updated in System Monitoring tab

Hello Team Mates,
I have installed SOLMAN 7.1 SP06, also we have completed the Managed system configuration.
Now while doing the configuration of system monitoring, I am not getting the any update related to HOST,
apart from its database. Instance monitoring is working properly.
solman_workcenter -->technical monitoring --> system monitoring --> monitor system,
Also in the solman_workcenter-> root cause analysis ->host analysis ; data is not getting updated.
Please guide us on the same, ASAP. Kindly check the attachment.
Thanking you in advance,
with best regards,
Deepak
Points will be rewarded to the right answers.

hi,
outside recovery follow the steps here Outside Discovery on Solution Manager 7.1
And also Please check whether your host agents are working, you can done this in managed system configuration -> connect diag agents -> check host agent,
Please update.
Thanks
Jansi

Why Yelp informations are not updated

Hello.
After having written several reviews on Yelp since a few weeks, I noticed the lack of updates of these informations inside iOS Maps for France.
Is there some restrictions to update Yelp integration of iOS Maps ? Or is it just some countries which have an absence of updates ?
Thanks by advance for your answers.

No Body responded very strange !!!!!

Itunes user id on phone not updating

I've updated my itunes account but I still get my old user id on my phone. how do i update the user id on my phone to the one on my computer?

Hello, 34sandy.
Thank you for the question. This behavior is normal if updated on another Apple ID account holders computer. To change the Apple ID on your device, follow the steps in the article below.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Cheers,
Jason H.

Billing Value is not updating in Cube for 2lis_13_vditm

Hi All,
I am getting Billing Value in PSA for 2lis_13_vditm, while its not getting updated in 0SD_C03 Cube. My transfer rules and transformation both are activated.
In PSA, i am getting Billing value for M and I both document category, while in cube I am getting value 0 for both document category.
I am not getting any error message.
Thanks in Advance,
Rishit

Hello,
Please check if there are any Start Routines , Char Routines or End routines written in the transformation
Also check if a constant is assigned to it.
Waiting for your feedback
Regards
Nitin Bhatia

Reg : User status information is not updating in Cube

Similar Messages

Maybe you are looking for