Regarding Default value
hai
I have one parameter P_XBLNR.
where i want to set DEFAULT value as Cancatenation of both SY-datum and questionmark(?).
how to do this.
Can i use Concatenation command in the data declaration part.
it does not seem to be working.
can you give me example
ambichan.
Does the date need to be in the users date format? The INITIALIZATION event is the correct place to do this. I assume that P_XBLNR is a character field of length 11. To get the date in the users date format, do the following:
INITIALIZATION.
WRITE SY-DATUM TO P_XBLNR MM/DD/YYYY.
P_XBLNR+10(1) = '?'.
Even though the WRITE says MM/DD/YYYY, it will still produce the date in the users format.
Similar Messages
-
MySQL question regarding default values
For the contacts management tutorial the contacts table ('contact_con') lists data for names as:
`name_con` varchar(50) NOT NULL default ''
However, in the PHPAdmin panel the "default" field is referenced by a footnote which reads: "For default values, please enter just a single value, without backslash escaping or quotes, using this format: a
Does this mean that the default field is simply left blank, or as PHPAdmin puts it, left blank "without [...] quotes"? If so, why include these quotes in the SQL dump?Paul,
*if* you specify a default blank value for text columns (e.g. varchar) in your sql dump, you will have to use those quotes, and that´s the correct way to do that -- but it´s of course up to you to omit specifying a default blank default value.
Providing an SQL dump that´s going to be inserted into PhpMyAdmin is different from how things can be specified when working with PhpMyAdmin directly.
If this is incorrect, how does one enter a blank default value in the values field 'for 'name_con' (for instance) by using the PHPadmin gui
just leave the default value field empty, and PhpMydmin will care for the rest.
when it specifically instructs not to use quotes for this field?
because you don´t have to add those quotes when working with PhpMyAdmin directly :-)
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver -
Regarding VL01N settinf default value
Hi Gurus,
In trancation VL01N Val.Type ( LIPS-BWTAR) should default value should set as ZCLIENT. Fot this what i have do please any one help me i am very thankfull .
Regards,
Venkat.hi,
use this exit.
V50PSTAT. -
Regarding the Report's Default Value
Now the default value of the CrystalDecisions.CrystalReports.Engine is empty which is a problem clarified by both Luke and Don Williams. Don provided a good tips for code, referring Don's reply at Jan 10, 2014 and Jul 31, 2012, I’ve tested this and it is worked, and I got a default value. However, the other sever problem has been occurred. Since the unmanaged code (COM) can't construct (casting) to the managed code directly, since it is a interface. Otherwise the original all Crystal Document objects will be wiped out, and become null value. Here is my analysis referred Don’s code:
foreach (CrystalDecisions.ReportAppServer.DataDefModel.ParameterField rasParamfield in myReport.ReportClientDocument.DataDefController.DataDefinition.ParameterFields)
Here myReport is coming from CrystalDecisions.CrystalReports.Engine.ReportDocument, so this code will not be useful if you want to keep myReport active. From this point, I do not know what another alternatives could be used to achieve this or using Reflection , and how?
Any responses would be so appreciated.
J. HuangHi Johnson,
Correct, but mostly it works without having to set the viewer to the RAS Report Object but just in case you do then I use a flag id RAS has modified the report and set the viewer accordingly:
You still need to open the report by the Engine but then assign it to the RAS client Doc:
add these assemblies:
using CrystalDecisions.CrystalReports.Engine;
using CrystalDecisions.Shared;
using CrystalDecisions.ReportAppServer;
using CrystalDecisions.ReportAppServer.ClientDoc;
using CrystalDecisions.ReportAppServer.Controllers;
using CrystalDecisions.ReportAppServer.ReportDefModel;
using CrystalDecisions.ReportAppServer.CommonControls;
using CrystalDecisions.ReportAppServer.CommLayer;
using CrystalDecisions.ReportAppServer.CommonObjectModel;
using CrystalDecisions.ReportAppServer.ObjectFactory;
using CrystalDecisions.ReportAppServer.Prompting;
using CrystalDecisions.ReportAppServer.DataSetConversion;
using CrystalDecisions.ReportAppServer.DataDefModel;
using CrystalDecisions.ReportSource;
Global flag:
bool IsRpt = true;
CrystalDecisions.CrystalReports.Engine.ReportDocument rpt = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
CrystalDecisions.ReportAppServer.ClientDoc.ISCDReportClientDocument rptClientDoc;
In the routine to you update the values add IsRpt = false;
In your open method use this:
rptClientDoc = new CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocument();
rpt.Load(rptName.ToString(), OpenReportMethod.OpenReportByTempCopy);
rptClientDoc = rpt.ReportClientDocument;
Then in the view report button use this:
try
if (!IsRpt)
crystalReportViewer1.ReportSource = rptClientDoc.ReportSource;
else
crystalReportViewer1.ReportSource = rpt;
catch (Exception ex)
btnSQLStatement.Text = "ERROR: " + ex.Message;
Don -
Default Value is not getting displayed in SUN ONE Ldap
Hello,
I have created an attribute in slapd.user_at.conf and it is associated in slapd.user_oc.conf.
The attribute default value is given through SUN ONE Console. But, In our application the default value is not getting displayed.
We need the default value to run our applicatin. Can anyone help me for this issue
Regards,
K. Senthil KumarHi anandkumar,
I belive this issue can be resolved by changing the Query proprties for the perticular field.
Kindly check the Field proerties in query designer and ensure that Text is enabled ather than Key.
__Field property check up:__Go to query designer->click onn the field-> Right hand side in properties click on display tab-> select Text in drop down menu of Display as tab.
FURTHER CHECK UP: check the master data avaiulability for the perticular info object, if masterdata is not available, do the text data for txt data availability in report level.
Hope this helps you!!
Best Regards,
Maruthi -
How to load a default value in to a column when using sql loader
Im trying to load from a flat file using sql loader.
for 1 column i need to update using a default value
how to go about this?Hi!
try this code --
LOAD DATA
INFILE 'sample.dat'
REPLACE
INTO TABLE emp
empno POSITION(01:04) INTEGER EXTERNAL NULLIF empno=BLANKS,
ename POSITION(06:15) CHAR,
job POSITION(17:25) CHAR,
mgr POSITION(27:30) INTEGER EXTERNAL NULLIF mgr=BLANKS,
sal POSITION(32:39) DECIMAL EXTERNAL NULLIF sal=BLANKS,
comm POSITION(41:48) DECIMAL EXTERNAL DEFAULTIF comm = 100,
deptno POSITION(50:51) INTEGER EXTERNAL NULLIF deptno=BLANKS,
hiredate POSITION(52:62) CONSTANT SYSDATE
)-hope this will solve ur purpose.
Regards.
Satyaki De. -
Assigning a default value to a field
Hello Everyone,
Could you please tell me how to assign a default value to a field in a transparent table, so that while creating an entry even if we don't enter the value, a default value will be assigned.
Thanks,
Anbu.Like this
DATA: BEGIN OF itab OCCURS 0,
field1 TYPE c VALUE 'X'
field2 TYPE c,
END OF itab.
append itab.
append itab.
You will have by default X set in both rows for field1.
Regards
Marcin
PS: Ooops I just noticed you meant transparent table but I wrote about internal one. As long as you maintain that table using maintenance view you can use event 05 - When Creating a New Entry and set fixed value for a field there. So whenever you create new entry it will receive that value.
Edited by: Marcin Pciak on Jun 23, 2010 8:57 AM -
SQLLDR - how to set a default value for an empty string
I'm using SQLLDR to load data from a flat file on Oracle 10g 10.2.0.4 EE, Linux RHEL 4 update 6. Seems like my question is simple, but darned if I can't find the solution.
My source file (comma delimited extracted form a different RDBMS) has some (not all) rows where the output for a string is "", and not NULL. How do I check for empty string and add a default value in the control file? The target column is non-nullable
Here's my current control file - however, the column attributeName where sometimes the source record is "" does not get evaluated as NULL.
load data
infile 'mydata.del'
badfile 'mydata.bad'
discardfile 'mydata.dsc'
into table mydata
fields terminated by "," optionally enclosed by '"'
TRAILING NULLCOLS
(l_metadata,
company,
className,
attributeName "decode(:vc_attributeName,null, 'none')",
attributeDefault)
{code}
When I tried decode with "", I received the following error:
{code}SQL*Loader-350: Syntax error at line 11.
Expecting "," or ")", found ", 'none')".
attributeName "decode(:vc_attributeName,"", 'none')", {code}
This does not work either:
{code}
load data
infile 'mydata.del'
badfile 'mydata.bad'
discardfile 'mydata.dsc'
into table mydata
fields terminated by "," optionally enclosed by '"'
TRAILING NULLCOLS
(l_metadata,
company,
className,
attributeName NULLIF attributeName = BLANKS ,"decode(:vc_attributeName,null, 'none')",
attributeDefault) I get the following in the log:
Table COMPANYMETADATA, loaded from every logical record.
Insert option in effect for this table: INSERT
TRAILING NULLCOLS option in effect
Column Name Position Len Term Encl Datatype
L_METADATA FIRST * , O(") CHARACTER
COMPANY NEXT * , O(") CHARACTER
CLASSNAME NEXT * , O(") CHARACTER
ATTRIBUTENAME NEXT * , O(") CHARACTER
NULL if ATTRIBUTENAME = BLANKS
SQL string for column : "decode(:attributeName,null, 'none')"
ATTRIBUTEDEFAULT NEXT * , O(") CHARACTER
Record 1: Rejected - Error on table COMPANYMETADATA, column ATTRIBUTENAME.
ORA-01400: cannot insert NULL into ("SRV5"."COMPANYMETADATA"."ATTRIBUTENAME")
{code}
Any help is appreciated -
Edited by: kpw on Feb 9, 2009 11:10 AMHello,
I just loaded following data successfully in my_data table using the same control file I posted. Yes it will evaluate "" as null and replace with none, remember in control file you have this option, "optionally enclosed by '"'.
#my_data.dat
"myname1", "attribname1"
"myname2", "attribname2"
"myname3", "attribname3"
"myname4", ""
#my_data.ctl
load data
into table my_data
fields terminated by "," optionally enclosed by '"'
TRAILING NULLCOLS
my_name char(30),
vc_attributeName "decode(:vc_attributeName,null, 'none', :vc_attributeName)"
{code}
Here is the output log file
{code}
Control File: my_data.ctl
Data File: mydata.dat
Bad File: mydata.bad
Discard File: none specified
(Allow all discards)
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Bind array: 64 rows, maximum of 256000 bytes
Continuation: none specified
Path used: Conventional
Table MY_DATA, loaded from every logical record.
Insert option in effect for this table: INSERT
TRAILING NULLCOLS option in effect
Column Name Position Len Term Encl Datatype
MY_NAME FIRST 30 , O(") CHARACTER
VC_ATTRIBUTENAME NEXT * , O(") CHARACTER
SQL string for column : "decode(:vc_attributeName,null, 'none', :vc_attributeName)"
Table MY_DATA:
4 Rows successfully loaded.
0 Rows not loaded due to data errors.
0 Rows not loaded because all WHEN clauses were failed.
0 Rows not loaded because all fields were null.
Space allocated for bind array: 18560 bytes(64 rows)
Read buffer bytes: 1048576
Total logical records skipped: 0
Total logical records read: 4
Total logical records rejected: 0
Total logical records discarded: 0
Run began on Mon Feb 09 18:17:35 2009
Run ended on Mon Feb 09 18:17:36 2009
Elapsed time was: 00:00:00.98
CPU time was: 00:00:00.10
{code}
Hope this helps clearing your dobuts
Regards -
Default value of BeX customer Exit variable not Displayed in WeBI??
Hello Experts,
We are stuck with a problem where WeBI report is created on top of BeX query and we are not able to see the default value of Bex Customer exit variable in WeBI run. Here is the complete scenario:
1. One restricted KF is created in BeX, restricted with Customer exit variable on net Due date. And this variable is mandatory, ready for input, and Default value in calculated is user exit as current Week's Monday.
2. So, by default KF data should be restricted to Monday of current week, if user does not change this value.
3. Now, WeBI report is created on top of this Bex query, and all is working fine, i.e. we are getting variable as Prompt in WeBI, but Default value is not shown while Running the Webi Report.
So, need your inputs on the same, if default values from BeX in WeBI is supported or not? If yes, why this is happening, and how to resolve it?
Please notice, the restrcition is in KF only, it is not a separate restrcition on Net Due date in Filter area or in Defualt area of BeX
and we are on SAP BW 7.1 and BOXI 3.1 SP4.
Regards,
Vipul
Edited by: VIPUL GOYAL on Nov 23, 2011 9:44 PMHi,
See 1285993 - Support of Customer Exit Variables from BEx query into WebIntelligence via OLAP universe
WebI will prompt when executed, but the default values calculated by the user exit - do not appear.
Note: If the BEx variable has property 'ready for input' set / enabled, then its WebI prompt shows ok, but no default value appears.
Cause
This behaviour expected 'by design' (in the context of the product's current limitations) as explained in the online guide below:
Please refer to Chapter 7, page 44, document link here: http://help.sap.com/businessobject/product_guides/boexir3/en/xi3_sap_olap_universes_en.pdf
Characteristic variable > processing type > Customer Exit is "Supported, without user entry"
--> This should be understood as meaning "User will not be shown a prompt"
regards,
H -
Why the default value is not the Oracle recommended?
Why the default value is not the Oracle recommended?
In Oracle 10g, the default alocated unit of Oracle ASM is 1MB. But the Oracle ducumentation states that "To ensure a higher probability of one
logical I/O resulting in no more than one physical I/O, the minimum stripe depth should be at least twice the Oracle block size". ---See Performance Tuniing Guide (10g10.2 Page8-3.
It's inconsistent. What is right way?>
Why the default value is not the Oracle recommended?
In Oracle 10g, the default alocated unit of Oracle ASM is 1MB. But the Oracle ducumentation states that "To ensure a higher probability of one
logical I/O resulting in no more than one physical I/O, the minimum stripe depth should be at least twice the Oracle block size". ---See Performance Tuniing Guide (10g10.2 Page8-3.
It's inconsistent. What is right way?
The default database blocksize of 10g is 8k.
>
8 * 128 = 1024
128 >= 2
At least twice the size does not mean exactly the doubled size.
There is no contradiction between the documentation and your observation in this case.
Kind regards
Uwe
http://uhesse.wordpress.com -
SUN ONE Ldap - Default value is not getting displayed
Hello,
I have created an attribute in slapd.user_at.conf and it is associated in slapd.user_oc.conf.
The default value for the attribute has been given in the SUN ONE Ldap. But it is not getting displayed in our application.
Can any one help me in this for this issue.
Regards,
K. Senthil KumarI assume that you are referring to a brand new field on the second step that was not on the form of the first step. If this is the case, then you should put the field in a hidden block of the first steps form. Default values and Auto-population from shells/single record BPs only occur of the create step, even if they are not used on that step. As long as you put them on the create step (even in a hidden block) they should initialize.
-
Default Value in Formula Variable - Inconsistent behaviour
Hi,
I am facing a very strange issue in a formula variable.
I had created three formula variables with default values and the user (Power user who has the Bex access) was able to change the default value themselves for two of these variables.
Now he wants to change all the three, so I have tried to check the issue and changed all the three for testing purpose.
Now, he is unable to change any of them!!! Sad, now I cant even say that "You dont have the Auth to do so"
Any clue? Anyone has faced similar issue.
Any thoughts are highy welcome! Suddenly users wants to get this one URGENTLY, usually he used to access the report once in month. Now he wants to use the same once in half an hour
We are on BI 7.0 with SP 24
Any thoughts PLS
Regardshi,
probably you can refer to SAP Note 1413030 - SAPBWNews NW 7.x BW Add-On Frontend Patch 1300 - GUI 7.10 or maybe SAP Note 1294382 - SAPBINews NW7.0 BI Add-On Frontend SP900 - GUI 7.1 that might help you in sorting out your problem, plus you can buy more time from the user as well
regards
laksh -
How to Change a Default Value from Drop Down Box displayed in Web Dynpro?
Hi,
How to Change a Default Value from 'High' to 'Low' in a Drop Down Box for RANGE field displayed in Standard Web Dynpro Component. I saw a Default Value set for a RANGE field in View Context When I select that field and click on Display. I am seeing Default Value set it to 'HI'. Please let me know how to change from HIgh to Low.
I appreciate your help!
Thanks,
Monicahi,
use the set_attribute( ) method now to set the attribute with a particular key eg HIGH in ur case
// u can use the code wizard( control +f7) this code will be auto generated when u select the
//radio button to read the context node
DATA lo_nd_cn_node TYPE REF TO if_wd_context_node.
DATA lo_el_cn_node TYPE REF TO if_wd_context_element.
DATA ls_cn_node TYPE wd_this->element_cn_node.
* navigate from <CONTEXT> to <CN_NODE> via lead selection
lo_nd_cn_node = wd_context->get_child_node( name = wd_this->wdctx_cn_node ).
* get element via lead selection
lo_el_cn_node = lo_nd_cn_node->get_element( ).
* set single attribute
lo_el_cn_node->set_attribute(
name = `ATTribute name.`
value = 'LOW' ).
it will solve ur query ..
also refer to this component
wdr_test_events -> view dropdownbyidx and dropdownbykey ->method name onactionselect.
regards,
amit -
How to set default value for a drop down in Mobile Application Studio
Hi,
We have a requirement in which for a drop down - Transaction type (Activities), the value should be defaulted to 'Visit' and the Activity Category should be 'Sales Visit'. I tried debugging the code and got the piece of code where this value is referred, but i'm unable to find out the location where this value is picked from. Also while opening up the properties corresponding to this, there is a default value tab in the properties pane. I tried by giving this default value, but didn't work. When I'm trying to revert the changes i've made in the property, it is showing up an error.
Any pointers on this would be of great help.
Thanks in advance,
Rasmi.Hi Rasmi,
You can default the process type field of BOACTIVITY by different ways-
1.In BOL, business object BOACTIVITY loaded event, check the parameter bIsNew and then default the value of process type if you want it only for new activities.
Other attributes currently get defaulted in the attributechanged event of BOACTIVITY where field is processtype.So if processtype is defaulted it will try to default other attributes based on that.It will pick values from the customizing maintained in SPRO->CRM->Transactions->Basic Settings->Define Transaction Type->Customizing Header.
2.You can also do defaulting in the UI.If you want to default one field based on a value selected for drop down, then write the code in the onselected2 event of the drop down.
In your specific case, best way is to use option 1.
Regards
Vivek -
How to set default value for drop down box in jsf
Hi,
Can anyone help me to set the default value in drop down box using <af:selectManyChoice> ?
As I know there is an unselectedLabel attribute in <af:selectOneChoice> but not valid attribute for <af:selectManyChoice>.
Any help must be appreciated.
Regards,
AKHi Frank
My entity type is a List in managed bean. I have set the entityType in the constructor of the managed bean. I have attached my code here.
TPSearchCriteriaBean.java****************************************
/** Constructor */
public TPSearchCriteriaBean() {
super();
entityType=new ArrayList<String>();
entityType.add(UIConstants.LIST_ITEM_ALL);
authorizationType=new ArrayList<String>();
authorizationType.add(UIConstants.LIST_ITEM_ALL);
companyType=new ArrayList<String>();
companyType.add(UIConstants.LIST_ITEM_ALL);
mrgStatus=new ArrayList<String>();
mrgStatus.add(UIConstants.LIST_ITEM_ALL);
legalStatus=new ArrayList<String>();
setEntityType(entityType);
setAuthorizationType(authorizationType);
setCompanyType(companyType);
setMrgStatus(mrgStatus);
country = "0";
//address = new AddressBean();
UIConstants.java***********************************************************
public static final String LIST_ITEM_DEFAULT = "select";
public static final String LIST_ITEM_ALL = "0";
LOVManager.java*****************************************************************
public List<SelectItem> getLovList(String lovType, boolean requiredOption_SELECT, boolean requiredOption_ALL)
log.debug("LOV loading for " + lovType + ": START");
List<SelectItem> lovList = new ArrayList<SelectItem>();
//check validity of lov loading request
validLov:
for (int i = 0; i < lovTypeArray.length; i++)
if (lovTypeArray.equals(lovType))
break validLov;
log.debug("ERROR: LOV Type not valid.");
return lovList;
//First select is replaced by ALL here
//<-- Select --> should be an option
if (requiredOption_SELECT)
lovList.add(new SelectItem(UIConstants.LIST_ITEM_DEFAULT, "--Select--"));
LOVDao dao = new LOVDao();
dao.loadLOVValues(lovType, lovList);
log.debug("LOV Loading successful!");
//<ALL> should be an option
if (requiredOption_ALL)
lovList.add(new SelectItem( UIConstants.LIST_ITEM_ALL, "ALL"));
return lovList;
Kindly help me.
Regards,
AK
Maybe you are looking for
-
Update Unavailable with This Apple ID
For years, my wife and I have shared the same Apple ID, so that we could share music and apps without having to pay for them twice. With the introduction of Family Sharing, I thought we could bypass that. I had my wife create her own Apple ID. I enab
-
Is there a way to NOT add "_X4" to the pdf file name after batch processing conversion?
whenever i convert a pdf file to a certain profile in batch processing, the pdf file duplicates with the other one having an "_x4" in the filename. i already tried removing in fixups (preflight) but i can't. do you have any ideas? thanks!
-
Rounding the order quantity in different Units of measurement
Hello Experts, We need your suggestion to meet the below mentioned client's requirement. There are around 200 SKUs in the consideration and three units of measure ( case, carton and pallet defined for them).We are looking for way to suggest the orde
-
how to reset play count in iTunes
-
Hi, A friend of mine bought a brand new iPad. He manage to enroll it to an Apple ID. However, he forgot the password of the Apple ID account and the device is linked to it. I tried to configure it myself. As i go through the configuration, it says ".