Regarding incentives text in the pay slip
hi experts,
one of my friend configured <u><b>incentives</b></u> wage type '6500' with the help of spro ,no doubt the amount of incentives is calculating in the total amount on the pay slip but the text of incentives and figure for it is not coming ,what will be the possible reason for it if u have a idea plz let me know ,,thnx in adnance...
here its comes like this...
Basic Salary 9,200.00
Special Allowance 5,872.00
15572.00
but in third line the incentive text and figure is not coming.....but its calculating in the total i.e incentives amount 500 must be displayed here.
null
solved by own
Similar Messages
-
Regarding heaer text in the smartforms
hi experts,
i m using table in my smartforms with header,main & footer,
also with the help of command statement i m getting number of pages,
here the header text is coming only on the first page but not on the next pages why,,,,,,,,,,,,,,,,,,,,,,,,
i dnt know what is the reason, eariler i used the same thing i m getting but now i m not getting header text on the next/number of pages except first page,,,on the next pages a only blank header is coming no doubt the main and footer is coming alrt......
plz help me........Hi,
In table attributes you have to check the check box.
at page break. -
Hi
i wanted display bank name in the payslip. i have usedd single fields where throug XBT table i brought field BANKL. here i am able to get the bank key but not name of the bank.
According to key i want to bring the bank name since we are using two banks.
inputs will be rewardedhi
got it
thanks Santhosh
srinivas -
Can I add text on the GR/GI Slip while performing MvT 313 in MB1B ?
Hi
When i use movement type 313 in Tcode MB1B, with Print and Collective Slip marked, is it
possible to add a text that comes visible on the GR/GI Slip ? The text is suppose to be
as an additional note to the other information on the slip.
I think i have tried to enter text in a couple of fields in MB1B but have never seen any of
this text on the printed Slip.http://help.sap.com/saphelp_nw70/helpdata/en/d6/0db303494511d182b70000e829fbfe/frameset.htm
-
How to create a pay slip in SAP
Hi,
I am new to SAP, I would like to know how to create the pay slip in SAP. Please provide me the detailed explanation on the same and it would be helpful if you could send the screenshots step by step.
Regards,
Vinayaka.Hi Vinayaka,
You can use PE51 transaction.
I advise you to copy the standard remuneration statement for your country grouping and change accordingly.
Moreover, pls refer to the following links for further info.
https://forums.sdn.sap.com/click.jspa?searchID=21265681&messageID=5798149
http://www.esnips.com/doc/1def7d8a-0fbd-4b72-82ef-c5ac2108710c/HR-Form-Editor-
Regards,
Dilek -
Printing remuneration statement (Pay slips) in the portal
Good Morning.
I have the following request.
I want that the employee can display the remuneration statement (Pay slips) or (receipt of payroll) in the portal.
There is a service standard in the ESS for do this customizing.
What are the steps to do this?.
Kind Regards,
Sanew2Hi,
The salary statement is either a Pe51 form or the HRFORM. Whichever it is, it needs to be added to the 'HRFOR' feature e.i, the form name needs to be added and the feature needs to be activated. Then the same will be displayed in the portal.
Secondly, there is another BADI, 'XSS_REM_INTERFACE' which needs to be implemented.
Then from here you can configure the settings for printing the salary statement from the portal ( the method DEFINE_PRINTBUTTON_STATUS in the BADI mentioned above needs to be activated, the button needs to be enabled) and then the MASS printing configured.
Regards,
Pinki -
Regarding the text in the smartforms.
HI EXPERTS,
i m working on the smartforms ,i have to display the text as a column heading in the forms i.e "Amount of
one increment granted from 01.07.95" as this text is very lengthy due to which my rows are getting heighted as i m using table for populating it in the forms,what i want that is there any way to get it condensed so that the distance between "amount & of " for example will be reduced.
plz help me sort out this problem.hi,
Goto SMARTSTYLES and Create a appropriate style there.
Create a Paragraph Style with lower Font and hence the Area will be reduced.
Apply that style to the text of the Heading
Regards
Sumit Agarwal -
Regarding the FM 'CREATE_TEXT' to writer text in the header
Hi all,
I am writing the text in header by using the FM 'CREATE_TEXT', in this we will pass the tables as it_tline,
this it_tline is declared as
data : it_tline TYPE STANDARD TABLE OF tline WITH HEADER LINE.
this tline table is having 2 fileds,
TDFORMAT
TDLINE
is that first field will repressent the column and sendcodn will be the test for that column..
Please correct me if i m wrong...
if the it_tline contains the data like this means
TDFORMAT TDLINE
01 SVB34334334,suresh
02 SVB25876666,Ch
then how it will write in the header.. please clarify me..
i gave the model how i m calling the FM in the below..
for writing the text into the invoice header
CALL FUNCTION 'CREATE_TEXT'
EXPORTING
FID = c_z122
FLANGUAGE = sy-langu
FNAME = gv_param
FOBJECT = c_vbbk
SAVE_DIRECT = 'X'
FFORMAT = '*'
TABLES
FLINES = it_tline
EXCEPTIONS
NO_INIT = 1
NO_SAVE = 2
OTHERS = 3 .
IF SY-SUBRC <> 0.
MESSAGE I111 WITH text-005.
ENDIF.
Thanks,
SureshPlease look at FM SCMS_DOWNLOAD .. to know how this is
used ...
If U can download it onto your desktop .. U'll get the file -
Hi Friends,
Please guide me "How can I show the employee designation on Pay slip"?
Where as of now currently it displays only emp group & emp sub group on Pay slip but not designation.
Job I taken as an M9 & Position: Officer
Emp group: Regular & Emp Sub group : M9
How can I proceed?
Thanks a lot for your timing,
Points can be given to the correct solution.
Kind Regards,
Saisree.SHi SAISREE,
For this u need to modify the remuneration form, copy the standrad form and make your own, Now suppose u don't need the employee group then remove it. In place of it add text module Position and in place where position no is printed, include PLANS (position ) field and in conversion choose 01 (Replace key with text) .
Path for the same is PE51-> enter the form name -> go to singfle fields(change mode) -> remove the text for emp grp and add text for position -> Now dbl click on the emp. grp printed , change the table to "P0001" and table field to "PLANS" conversion field as 01 and also adjust the output lngth.
This will solve your problem.
Regards,
Tomesh -
Print pay-slip on double-sided
Hello,
We would like to print pay-slip on both side mode (we use ABAP list with report RPCEDTF0).
The print is Ok but the problem is that, on the same page, there are pay data for an employee on the side and pay data for an other employee on the other side.
My question is : how to do to add a jump (new page) after each employee ?
Is it a standard option and how to implement it (ABAP, form) ?
Examples could be help me.
Thanks in advance for your answer.
Daniel.dear ,
check ur printer settings , bcos u are using std.program , so i cannt say SAP is doing wrong , better to check ur printer settings
Regards
prabhu -
Printing Employee Pay Slip using HRFORMS
Hello Experts,
I am working on a smartform for printing employee pay slips/remuneration statments using HRFORMS config.
I am trying to print the payslip checks using this and in the smartform, I have a problem with printing the check footer data using MICR font.
I read the Note 94233 - Support of MICR font. I have both MICR_C 10.0 Point Bold=Off, Italic=Off
MICR_E 10.0 Point Bold=Off, Italic=Off configured, and it does not work. I also have the required setting for the output device in SPAD.
While I try to print C &bank number&C A&bank_account_number&A, it literally prints C and A instead of the special MICR characters for C and A.
Anybody came across any such problem before and found any solution to this?
I appreciate if you can reply with your solution, will realy appreciate it.
PS: I am using Smartforms for printing the forms here.
Thanks in advance.
Shivani.
Edited by: Rob Burbank on Sep 22, 2009 4:03 PMHi,
The problem is resolved .
Regards,
Tanuja -
Customize Payment Advice according to the paying company
Hello Guys,
I was wondering whether it is possible to change the header of the payment advice to show the data of the paying company.
The standard method for the header is to contain data from a text module, defined in SO10.
So is it possible to make an automatic check in the form, or in customizing perhaps, that selects a different text module according to the paying company.
E.g.: paying company has company code A => text module TEXT_HEADER_A is selected,
paying company has company code B => text module TEXT_HEADER_B is selected, etc.
Am I missing something here? Any help is appreciated.
Best Regards,Hello,
Thanks for the reply, but I probably wasn't very clear. We are using a custom Zform sapscript not a smartform. On the sapscript we would like to add some details about the paying company.
The conditioning is not really the problem, but where we can get the info about the paying company. I have found that tables REGUP and REGUH contain info that might be able to provide this.
It seems quite difficult however to print a payment advice, since it involves scheduling a payment run that contains some documents with expired due date. Perhaps anyone has similar experience with this? -
Hr: Pay-Slip Layout Change
Hi Guys,
This is Prabhu from Pepsi, india. I am new to SAP-HR(ABAP).I have a requirement to chanhe the layout Format of pay-Slip.
That is :
In place of Company Code, i have to Display Emp PAN Number.
In Tcode: PE51 , i am trying to change that fields(Company Code) to PANnumner fields.But i am unable to find relavent table in the table list of the Form.
1.How can i do ?
2. We r using Standard form itself.
3.if there any way to include new Fields in that.
please give me some Inputs .
regards
Prabhu
technical Consultant-team SAP
PIH
Gurgaon
[email protected]Please specify you are taking about the renumeration statement or payroll check
1. if renumeration statement then you can go to PE51 eneter the molga as 10 and then your form name
2, if payroll check then might be sap SCRIPT or smart forms is used for desining the layout of check.
Thanks -
MB5B : show the material slip
Hello,
I'm using MB5B to have a report of stocks with material movement.
When I make some material movement, I have filled the "material slip" field.
How to get it in report MB5B ?
thanks a lot.Hello Romeo,
I agreed with Rajat's answer
The possibility to include additional fields in the report MB5B is limited to MSEG, just as you can see in the text of the report RM07MLBD_CUST_FIELDS itself:
This include contains the structure for additional fields for report
RM07MLBD ( transaction MB5B )
the following fields are not shown in the list of report
RM07MLBD
If you want to insert some of these fields in the list of the
hidden fields delete the '*' in the type definition.
>>* There are only fields from database table MSEG possible <<<<<<<<<<<
Please use only the following fields, because these fields
are considered during the creation of the field catalog;
plaese consider, that each active field will cost performance
If you need to add aditional information from other tables, like the
Reference Document Number (MKPF-XBLNR) I am afraid that you will need to
build your own queue...
Regards,
Mauro -
Hi Experts,
I want to add Leave details in pay slip.
for eg.
i having separate colums for
1) Leave with out pay
2) Privilage leave
3)casual leave
4) sick leave....Etc...
How to add these leaves in Pay slip.
Please Help me
Regards,
SivaHi siva,
You can add P2001 to V_T512K table for CEDT class.
Then in PE51 it comes in the table list.
Pls try it.
regards,
Dilek
Maybe you are looking for
-
Dear Sirs, We have activated version management for purchase orders. Purchase Orders are made in the system and printout of the same are being taken from the print preview screen before the release of the PO. If some changes are made in the PO after
-
How to create service PO while using BAPI
Dear Experts I am getting error while creating Service PO using BAPI E 518 No account assignment exists for service line 0000000010 E 518 No account assignment exists for service line 0000000010 TYPES : BEGIN OF ty_header, po_no(10) TYPE n,
-
Duplicates in library, which is in album, (more complicated)
So I had 3 massive libraries that I merged into 1 using iPhoto Library Manager. However on my first attempt I neglected to check the option to not import duplicates and replace duplicates in existing albums. I had attempted a second time and was succ
-
PowerMac G5 OS 10.4.11 Won't boot
Hi, This morning one of our MacPro G5 wouldn't boot. Power LED stays solid on, but no chime, no video, no nothing. It won't even recognize the keyboards (tried different ones just in case), so I can't even try to boot from the install media nor clear
-
Org.xml.sax.SAXParseException: Content is not allowed in prolog Error
Hello, this is pratap.<br> i was trying rules using decision tables with 'call charges' example<br>. after filling the text fields i am getting an error org.xml.sax.SAXParseException: Content is not allowed in prolog<br>. Can any one please tell me w