Regarding message_type_x
Hi Experts,
During Upgrade from version 4.6c to Ecc6.0
I am facing the following runtime error with the standard include
LKKBFF01.
The error is due to MESSAGE_TYPE_X in the LKKBFF01.
MESSAGE X000(0K) WITH L_MESSAGE L_LINE L_WORD.
Can any one give the solution for the above problem.
<REMOVED BY MODERATOR>
Best Regards,
venkata Siva Reddy.
Edited by: Alvaro Tejada Galindo on Apr 23, 2008 11:53 AM
check the oss notes..
note 203388..
regards,
venkat.
Similar Messages
-
ABAP program "SAPLCNTL" in "CHECK_OO": MESSAGE_TYPE_X
Hi,
I have a problem with a program with ALV-list. Sometimes it terminates with a dump. I can not reproduce the dumps and I can not find the reason for it. I do not know, if it only terminates on some clients.
In the program the alv table is refreshed with CL_GUI_ALV_GRID=>REFRESH_TABLE_DISPLAY. After this there is also a statement CALL METHOD cl_gui_cfw=>flush.
Can anyone help?
Kindly regards
Frank
Runtime Error MESSAGE_TYPE_X
Date and Time 11.11.2008 11:24:28
ShrtText
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
Short text of error message:
Control Framework: Invalid Processing of ABAP Object Control
Technical information about the message:
Diagnosis
You want to edit a control created with ABAP objects techniques
(class-based Control Framework) using a function module (function
module-based Control Framework). The system does not support this.
The Class ID of the control is SAP.DataProvider.1.
System response
The transaction is terminated.
Procedure
Contact the person responsible for the SAP System.
Message classe...... "DC"
Number.............. 007
Variable 1.......... "SAP.DataProvider.1"
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"MESSAGE_TYPE_X" C
"SAPLCNTL" or "LCNTLF01"
"CHECK_OO"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "gl3ap4"
Network address.......... "194.69.46.206"
Operating system......... "AIX"
Release.................. "5.3"
Hardware type............ "00C2809E4C00"
Character length......... 16 Bits
Pointer length........... 64 Bits
Work process number...... 8
Short dump setting....... "full"
Database server.......... "glince215"
Database type............ "ORACLE"
Database name............ "GL3"
Database owner........... "SAPSR3"
Character set............ "C"
SAP kernel............... "640"
Created on............... "Feb 18 2008 23:36:16"
Created in............... "AIX 1 5 00538A4A4C00"
Database version......... "OCI_920 "
Patch level.............. "221"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.*.*, ORACLE 10.1.0.*.*, ORACLE
10.2.0.*.*"
SAP database version..... "640"
Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5, AIX 1 6"
Memory usage.............
Roll..................... 16192
EM....................... 16759424
Heap..................... 0
Page..................... 139264
MM Used.................. 4672968
MM Free.................. 3703952
SAP Release.............. "640"
User and Transaction
Client.............. 001
User................ "PB754"
Language key........ "D"
Transaction......... "ZVLA "
Program............. "SAPLCNTL"
Screen.............. "ZTCOCKPT 2000"
Screen line......... 4
Information on where terminated
The termination occurred in the ABAP program "SAPLCNTL" in "CHECK_OO".
The main program was "ZTCOCKPT ".
The termination occurred in line 178 of the source code of the (Include)
program "LCNTLF01"
of the source code of program "LCNTLF01" (when calling the editor 1780).
Source Code Extract
Line SourceCde
148 *---------------------------------------------------------------------*
149 * FORM %_CONTROL_DISPATCH *
150 *---------------------------------------------------------------------*
151 *
152 *---------------------------------------------------------------------*
153 * --> OKCODE *
154 *---------------------------------------------------------------------*
155 FORM %_CONTROL_DISPATCH.
156 * CALL FUNCTION 'CONTROL_DISPATCH'
157 * EXPORTING
158 * FCODE = SY-UCOMM
159 * EXCEPTIONS
160 * CB_NOT_FOUND = 1
161 * OTHERS = 2.
162 ENDFORM.
163
164 FORM REGISTERGLOBALOCXEVENT
165 USING SHELLID TYPE I EVENT TYPE I.
166 CALL METHOD OF CL_GUI_OBJECT=>H_GUI 'RegisterGlobalOCXevent'
167 NO FLUSH
168 EXPORTING #1 = SHELLID
169 #2 = EVENT.
170 ENDFORM.
171
172 form check_OO using p_handle type cntl_handle.
173 * check sy-uname = 'KSCHMIDT'.
174 call method cl_gui_cfw=>get_subscriber_by_id
175 exporting shellid = p_handle-shellid
176 exceptions others = 1.
177 if sy-subrc = 0.
>>>>> message X007 with p_handle-clsid.
179 endif.
180
181 endform.
182
183 form check_oo_2 using p_shellid type i.
184 data l_handle type cntl_handle.
185 * check sy-uname = 'KSCHMIDT'.
186 call method cl_gui_cfw=>get_subscriber_by_id
187 exporting shellid = p_shellid
188 exceptions others = 1.
189 if sy-subrc = 0.
190 call function 'CNTH_HANDLE_BY_SHELLID'
191 exporting shellid = p_shellid
192 importing h_control = l_handle
193 exceptions others = 1.
194 message X007 with l_handle-clsid.
195 endif.
196 endform.
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 0
SY-TABIX 12
SY-DBCNT 1
SY-FDPOS 1
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY STAT2000
SY-UCOMM NSEL
SY-TITLE ZTCOCKPT Cockpit: Transporte Aufträge Lieferungen
SY-MSGTY X
SY-MSGID DC
SY-MSGNO 007
SY-MSGV1 SAP.DataProvider.1
SY-MSGV2
SY-MSGV3
SY-MSGV4
Active Calls/Events
No. Ty. Program Include Line
Name
11 FORM SAPLCNTL LCNTLF01 178
CHECK_OO
10 FUNCTION SAPLCNTL LCNTLU13 16
CONTROL_DESTROY
9 FUNCTION SAPLCNDP LCNDPU07 22
DP_DESTROY
8 FUNCTION SAPLCNDP LCNDPU10 103
DP_CONTROL_ASSIGN_TABLE
7 METHOD CL_GUI_ALV_GRID_BASE==========CP CL_GUI_ALV_GRID_BASE==========CM01U 37
CL_GUI_ALV_GRID_BASE=>SET_TOOLBAR_BUTTONS
6 METHOD CL_GUI_ALV_GRID===============CP CL_GUI_ALV_GRID===============CM01M 52
CL_GUI_ALV_GRID=>SET_TOOLBAR
5 METHOD CL_GUI_ALV_GRID===============CP CL_GUI_ALV_GRID===============CM01P 432
CL_GUI_ALV_GRID=>SOFT_REFRESH_TABLE_DISPLAY
4 METHOD CL_GUI_ALV_GRID===============CP CL_GUI_ALV_GRID===============CM00T 116
CL_GUI_ALV_GRID=>REFRESH_TABLE_DISPLAY
3 MODULE (PBO) ZTCOCKPT ZTCOCKPT 652
PBO_ALV_2000
2 FORM ZTCOCKPT ZTCOCKPT 167
ALVAUSGABE
1 EVENT ZTCOCKPT ZTCOCKPT_INC 213
START-OF-SELECTION
Chosen variables
Name
Val.
No. 11 Ty. FORM
Name CHECK_OO
SY-REPID
SAPLCNTL
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5454445422222222222222222222222222222222
310C3E4C00000000000000000000000000000000
%_VIASELSCR
0
4
P_HANDLE-SHELLID
128
0008
0000
BS_CENTER
768
0000
0030
%_DUMMY$$
0000
0000
2222
0000
FONT_ITALIC
1
0000
0001
SY-SUBRC
0
0000
0000
SY-XFORM
XAB_READ
000000000000000000000000000000
000000000000000000000000000000
544554442222222222222222222222
812F25140000000000000000000000
SY-MSGID
DC
00000000000000000000
00000000000000000000
44222222222222222222
43000000000000000000
SS_SIMPLE
11
0000
000B
SS_BLACKRECT
4
0000
0004
SPACE
0
0
2
0
SY-MSGNO
007
000
000
333
007
SY-MSGV1
SAP.DataProvider.1
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
54524676576766672322222222222222222222222222222222
310E414102F69452E100000000000000000000000000000000
P_HANDLE-CLSID
SAP.DataProvider.1
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
5452467657676667232222222222222222222222222222222222222222222222222222
310E414102F69452E10000000000000000000000000000000000000000000000000000
SY-MSGV2
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
SY-MSGV3
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
SY-MSGV4
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
No. 10 Ty. FUNCTION
Name CONTROL_DESTROY
NO_FLUSH
X
0
0
5
8
H_CONTROL
OBJHOLE2## 7263 ####
00000000FF000000000000000000000000000000000000000000000000000000000000000000000000000000000000
00000000FF000000000000000000000000000000000000000000000000000000000000000000000000000000000000
44444443FF222222222222222222222222222222222223333222222222222222222222222222222222222222080022
F2A8FC52FF000000000000000000000000000000000007263000000000000000000000000000000000000000000A00
BS_DEFPUSHBUTTON
1
0000
0001
BS_LEFT
256
0000
0010
THIS_DUMMY_VALUE
0
0000
0000
BS_PUSHBUTTON
0
0000
0000
H_CONTROL-OBJ+16(4)
-1
FFFF
FFFF
SYST-REPID
SAPLCNTL
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5454445422222222222222222222222222222222
310C3E4C00000000000000000000000000000000
H_CONTROL-HANDLE_TYPE
NO_OC
0000000000
0000000000
4454422222
EFFF300000
CNTL_TYPE_OCX
OCX
0000000000
0000000000
4452222222
F380000000
CNTL_TRUE
1
0000
0001
IS_ITSAC_767A497173BF11D28BB
0
0
2
0
AC_EXPORTS_4E238C5273BF11D28BB
Table[initial]
AC_EXPO_WA_4E238C5273BF11D28BB
000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
2222222222222222222222222222222233333333322222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
No. 9 Ty. FUNCTION
Name DP_DESTROY
H_DP
OBJHOLE2## 7263 ####
00000000FF000000000000000000000000000000000000000000000000000000000000000000000000000000000000
00000000FF000000000000000000000000000000000000000000000000000000000000000000000000000000000000
44444443FF222222222222222222222222222222222223333222222222222222222222222222222222222222080022
F2A8FC52FF000000000000000000000000000000000007263000000000000000000000000000000000000000000A00
G_STRETCH_UNICODE_COLS_VALID
X
0
0
5
8
%_DUMMY$$
0000
0000
2222
0000
SY-SUBRC
0
0000
0000
SYST-REPID
SAPLCNDP
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5454444522222222222222222222222222222222
310C3E4000000000000000000000000000000000Hi Frank,
I doubt it is related to function 'LVC_FIELDCATALOG_MERGE' since the current SAP help documentation talks about using this function for the purpose that I'm sure you are using it. The short dump states that the problem is caused by the use of an "old" function-module-based control framework function combined with the class-based OO CFW.
Diagnosis
You want to edit a control created with ABAP objects techniques
(class-based Control Framework) using a function module (function
module-based Control Framework). The system does not support this.
If you look at the call sequence in the short dump, function module 'CONTROL_DESTROY' is being called (which then calls function 'CHECK_OO' from which the error is sent). Function module 'CONTROL_DESTROY' is in function group CNTL which is part of the "old" function-module-based CFW.
Since the 'CONTROL_DESTROY' function is ultimately called as a result of your Z-program legitimately calling the standard SAP method CL_GUI_ALV_GRID=>REFRESH_TABLE_DISPLAY, I'd say you might want to consider opening a customer message with SAP providing as much detail and background as possible. But before you bother to do that (or while you are waiting to hear back from SAP) you may want to double-check your Z-program to make sure you aren't calling some other function modules from function groups CNTL or CNT0 (the "old" CFW function modules).
I've included just the call sequence from your short dump here for easier reference. Notice the order of the calls from 1 to 11, ending with functions 'CONTROL_DESTROY' and 'CHECK_OO'. I think 'CONTROL_DESTROY' may be causing the problem (??):
Active Calls/Events
No. Ty. Program Include Line
Name
11 FORM SAPLCNTL LCNTLF01 178
CHECK_OO
10 FUNCTION SAPLCNTL LCNTLU13 16
CONTROL_DESTROY
9 FUNCTION SAPLCNDP LCNDPU07 22
DP_DESTROY
8 FUNCTION SAPLCNDP LCNDPU10 103
DP_CONTROL_ASSIGN_TABLE
7 METHOD CL_GUI_ALV_GRID_BASE==========CP CL_GUI_ALV_GRID_BASE==========CM01U 37
CL_GUI_ALV_GRID_BASE=>SET_TOOLBAR_BUTTONS
6 METHOD CL_GUI_ALV_GRID===============CP CL_GUI_ALV_GRID===============CM01M 52
CL_GUI_ALV_GRID=>SET_TOOLBAR
5 METHOD CL_GUI_ALV_GRID===============CP CL_GUI_ALV_GRID===============CM01P 432
CL_GUI_ALV_GRID=>SOFT_REFRESH_TABLE_DISPLAY
4 METHOD CL_GUI_ALV_GRID===============CP CL_GUI_ALV_GRID===============CM00T 116
CL_GUI_ALV_GRID=>REFRESH_TABLE_DISPLAY
3 MODULE (PBO) ZTCOCKPT ZTCOCKPT 652
PBO_ALV_2000
2 FORM ZTCOCKPT ZTCOCKPT 167
ALVAUSGABE
1 EVENT ZTCOCKPT ZTCOCKPT_INC 213
START-OF-SELECTION
Regards,
Jamie
P.S. Please report back here if you find a solution (or if SAP finds one as a result of your customer message). -
0BBP_BIGURE - MESSAGE_TYPE_X in attrib change
Hi,
When I load the 0BBP_BIGURE hierarchy from SRM 5.0 to BI 7.0 in process chain I always get a MESSAGE_TYPE_X dump in the Attrib Change. If I activate the hierarchy, I don't get an error.
I think the reason is that the RSDDCHNGPROT is not filled, but I'm not sure about this. Did anyone else have this problem ?
kind regards
PieterHello Dinesh,
Here is the most useful info in the dump
Error analysis
Short text of error message:
System error in program SAPLRSDDS and form GET_CNSID_AND_OBJECTS_2-1- (see long text)
Technical information about the message:
Message classe...... "BRAIN"
Number.............. 299
Variable 1.......... "SAPLRSDDS"
Variable 2.......... "GET_CNSID_AND_OBJECTS_2-1-"
Variable 3.......... " "
Variable 4.......... " "
kind regards
Pieter -
All,
I am done some code changes in Program ZEX_SAPLXRSA related to structure ZAMC11VA0ITM ,And field has been added in DS-2LIS_11_VAITM.
All chnages transported to Production System,setup tables filling done and pulled data to ODS.
In daily loads before starting loads in R/3 2LIS-02,03,11,13 V3 Jobs could be running , but today 2LIS 11 R/3 job cancelled due to shoort dump ( MESSAGE_TYPE_X ) in PR5 System.
Once this 2LIS 11 R/3 Job is in finished status only i can pull the data to BW,All my daily loads dependent on 2LIS 11(SALES Data) PLease suggest.
How could i resolve the dump(MESSAGE_TYPE_X ) in PR5 to success the 2LIS 11 R/3 Job.
Please suggest ASAP.Hi ,
Can you please paste the dump here?
MESSAGE_TYPE_X is a generic dump and it occurs for a variety of reasons.
Regards,
SK -
Hello all,
We are facing an issue, that "Message_type_X " short dump occurs .
the actual short dump message is:
"MESSAGE_TYPE_X" " " |
"CL_RSQ_ISET_SERVICE===========CP" or "CL_RSQ_ISET_SERVICE===========CM016"
"EXTEND_FIELD_BUFFER" .
kindly help me..
|hi,
kindly check SAP Note 1137254 , it might be helpfult to you
also check in sm21 about system log, in ST22 check on information on where termiinated and in error analysis that will give you some clue on job which is effected
regards
laksh -
Hi,
I'm facing a short dump error is POS DM. When I read data from the remote cube using LISTCUBE / RSA3 (checking the datasource), I'm getting MESSAGE_TYPE_X error in the following line, this is due to the SY-SUBRC NE 0.
If NOT SY-SUBRC IS INITIAL.
MESSAGE X000(/POSDM/COMMON) with " " " " " ".
ENDIF.
My datasource is 0RT_PA_TRAN_CON_REM
Please let me know if there is any OSS for this.
Thanks,
ChandranHi,
This behaviour can be observed if there were changes done to tablespace in the target system during deletion (for example: the tablespace assigned to ZAGILE_ECO does not exist anymore). Do check for ORA-00959 errors in the system logs in such a situation.
Also check if the table ZAGILE_ECO has already been deleted. In that case, you can just ignore the error and change the status of the activity to complete via tha troubleshooter.
Regards,
Suman -
ABAP Runtime error MESSAGE_TYPE_X in process chain
in our daily load process chain we have a level where datas are getting loaded in to a cube from 4 dso thru dtp. in this level the DTP fails approximately twice in a week. the DTP is shown in red in the log view. when we check the message its showin MESSAGE_TYPE_X ABAP runtime error.
if we give repeat it runs sucessfully and the following process are going well.
do u ppl have any ideas abt this.Hi,
This failure would happen for many reasons, like,
Source system connection failure
Short dump.
System overload
Non availability od work processes as a reasonthe load would have been timed out.
Locked due to another load.
That is the reason as to which the load when repeated is successful, as by then,
The source connection would have been restored
there would be free processes available
The other load would have completed.
Regards,
Savitha -
Message_type_x short dump while deleting request from infocube
Hi,
While deleting one of the erroneous requests from some infocubes,
system is resulting in short dump "MESSAGE_TYPE_X".
This is happening only with respect to some infocubes.
Description of short dump:
Short text of error message:
System error in program RSMDATASTATE and form RSM_DATASTATE_CHECK-5- (see long text)
Can any one of you please help with this?
Regards,
Nilima RodriguesHi NILIMA,
I got same problem with my InfoPackage last month with same error msg.
that error come due to data inconstancy in data base table.
in my case i am unable to open my InfoPackage and after double clicking it was giving dump with same error.
If u know abap then just change the sy-subrc value from 4 to 0 before dump line code it will resolve your problem.
for this on dump screen click on debugger button then it opens your code and shows line on which u getting dump with table name check your entry in table ok
if u unable u find table then do one thing just put break point before dump line and open fresh rsa1 and go to same cube and double click it will stop on your debugger point just press f5 button it shos sy-subrc 4 convert it to 0 and press edit button and press f8 .
Regards
Ankit -
ABAP/4 processor: MESSAGE_TYPE_X while creating bulk shipment cost
Hi All,
while bulk shipment cost creation using SAP program 'ROIGTRSL' in background , some jobs are failing very raarly in prodcution, if i check in job log it's showing message 'ABAP/4 processor: MESSAGE_TYPE_X'
how to avoid this error, is there any OSS note?
regards,
DSKHi kumar,
see this link
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapdocu.txt
chk below....
Try this program RS_TRANSTRU_ACTIVATE_ALL to activate
Check if any transports imported in the system ( some one else might have transported BI objects for other requirements, they might have missed to check the dependency ). if so recollect your objects in development system and transport those objects again.
Check if any support packs or OSS notes are imported in your system. Massage type X error is so
generic error so please review the system logs( tcode : SLG1) and analyize the problem.
Cheers
nagendra -
Dear Folks,
We are using BW 3.1 and R/3 4.6C. Daily I am getting one ABAP dump of MESSAGE_TYPE_X type.
Upon further investigation, I got the following information:
Short text of error message:
Structures have changed (sy-subrc=2)
Long text of error message:
Diagnosis
You are using the update method 'Queued Delta'. It is not possible
to transfer an entry from the extraction queue MCEXnn (nn = number
of affected application from the Logistic Cockpit) to the
corresponding delta queue with report RMBWV3nn. This is because
since the document was updated, one of the structures used was
changed.
System Response
Transfer to the delta queue was not performed.
It is also referring to one note # 328181, which I felt some difficulty to follow.
Can any one please help me resolving this issue? If you need any other information, please let me know.
Thanks in adnvace!
Regards,
FasialHi,
it seems you have tried to do some patch or plugin upgrade in R/3 and you havent cleaned up the extraction queue for LO data sources in LBWQ or did some ehancements to a data source belonging to LO cockpit and didnt cleaned up the queue.
Also it seems the daily delta loads are not running.
See this note which tells you what needs to be done in those cases 762951,1081287,328181
1)You need to delete the existing init which is present in the system for the data source.
2)Stop the job for collective update in LBWE->Job control for this data source.
3)Go to LBWQ in R/3 display the queue which you think is creating the issue.go inside the queue with the display function again.you will have to delete all the entries present in the queue.
4)Once deleted then you can schedule a new init without data transfer and schedule the job in LBWQ for the data source again.
This will result in loss of delta and you will have to reload the history again.
Thanks
Thanks
Ajeet -
Regarding error occur in business content activation
Hai experts,
when i am activating the business content its going to dump analysis the system is going to give me the error like " message_type_x" using st22 i found that error occured in abap program .It is an predefined program.Is there any solution for that one other wise i have raise this question to service.sap.com.i need emergency.
bye.Hi ,
You have to underastand whether this is happening with all the objects , I mean are you getting this dump for any object you are trying to activate through bi content.
If this is happening with few objects then you have see whether the method of activation bi content is being performed in the correct method.
If thisis happening with all the objects then check all the basic settings and at the same time check authorisations.
Check if you have any thing in SU53 transactions.
Regards
Rahul Bindroo -
ALE throws dump Message_Type_X
Hi All,
I did ALE configuration on my DEV and PRD for transferring data from DEV to PRD. Although i know, we should not move any data from DEV to PRD, but it's client requirement.
So i did ALE and model view successfully generated on DEV and RFC is perfectly fine even by connection test or authorization test.
When i run bd10 on DEV, it successfully generated idoc with message type MATMAS. and when i get the materail via BD11, it successfully created idoc on PRD. but when i see the material in MM03, it throws error material does not exist or is not activated.
it also throws dump Message_Type_X
WORKFLOW_LOCAL_400
RFC_READ_DESTINATION_TYPE
DESTINATION_NOT_EXIST
What steps should follow now?
Regards
DishaHi Krishnendu,
Status is in red when i check from t-code WE02.
When i check it in MM90 and execute it, it does not show any log.
Please tell if i am missing any step..
Regards
Disha -
SM:EXEC SERVICES JOB CANCELLED with MESSAGE_TYPE_X dump
In SAP solution manager server SM:EXEC SERVICES job is Cancelling
Hence we are unbale to get the EWA reports...
Error:
Job started
Step 001 started (program RDSMOPBACK_AUTOSESSIONS, variant
&0000000001009, user ID RAOP)
Solution OC Application Monitoring is being edited (Operations)
Trying to perform session 5000000003618
ABAP/4 processor: MESSAGE_TYPE_X
Job cancelled
Applied note 727998 but no use... please help me .
Regards
Prabhakar
Version details:
ST-SER 620-2006_2
PI_ BASIS 2005_1_620Hi Prabhakar,
Which SP of Solman are you using? If you are using Solman SP12 then the ST-SER has to be upgraded to higher version. Also update the PI_BASIS component.
ST-SER 700_2007_1
PI_BASIS 2006_1_700.
Regards,
Raghavendra. -
Runtime Error "DYNPRO_MSG_IN" and "MESSAGE_TYPE_X"
Hi Gurus,
I getting the following Runtime Error
"DYNPRO_MSG_IN" and "MESSAGE_TYPE_X"
can anybody help me..
Thanks & Regards
Manna Dasupgrade your patch levels this would solve ur problem
-
Hi , MESSAGE_TYPE_X dumps generated in SRM system ...
Hi all,
Large no. of MESSAGE_TYPE_X dumps generated in SRM system ...need solution for this dump.Looking forward for your suggestions...
Regards,
prakashHi Kalakatla,
Check all jobs running and probably ended by error, also check IDOC handling in BD71. The dump says something about token management. Possibly this is something with automatic user/password distribution to various systems. Your system landscape and/or architecture may have changed and something is not maintained accordingly.
Regards,
Clemens
Maybe you are looking for
-
I've got a new laptop. How do I sync the music and videos from my iPhone back to the laptop?
There's no data on my new computer. How do I transfer all my iPhone data to the computer?
-
Count the number of rows based on the values!!!
Hi all, What I am using: I am working with a multidimensional database in Visual Studio 2010 using its Data source view and calculation member and dimension usage. What I want to do: I have a fact table that has five columns(leg(s),hand(s), Head and
-
Router blocks random IP or Domain Addresses
This appears to be a rather unusual problem and has only been noticed in the past month. Suddenly without any apparent warning, certain web sites are no longer accessible. This was first noticed when I was unable to access my pop3 email from the www.
-
Calling report with auto-filling the date parameter
Hi all, I need to schedule a report whereby the date is need to be entered manually by the user. Now, if I need to schedule this report, how am I tell this report on the date parameter I want to fix in the 1st day of a month. So that the report will
-
BlackBerry keeps beeping all time - Only beeps when the connection with carrier is active.
Sirs, I have a Curve 8900 with the 4.6.1.133 (platform 4.2.0.85). This device keeps beeping every 10 seconds, I have tried remove the battery when the BB was on, waiting for 1 minute, put it again. I have looked all configurations. I don´t have any