Regarding selection of value

hi,
i have two table controls in my view.but i can able to select valu from both of them.which i should not do,that why i hav a button in the same view to clear the row which one i want,tell me how to know whether i hav selected both the rows of the table controls or not.and if the user is selecting both then i have to raise an error msg.
regards,
tania

hi tania,
just check in onselect event of one table abd check the other table is initial or not,
DATA LO_ND_TABLE TYPE REF TO IF_WD_CONTEXT_NODE.
DATA LO_EL_TABLE TYPE REF TO IF_WD_CONTEXT_ELEMENT.
DATA LS_TABLE TYPE WD_THIS->ELEMENT_TABLE.
navigate from <CONTEXT> to <TABLE> via lead selection
LO_ND_TABLE = WD_CONTEXT->GET_CHILD_NODE( NAME = WD_THIS->WDCTX_TABLE ).
@TODO handle not set lead selection
IF LO_ND_TABLE IS INITIAL.
ENDIF.
get element via lead selection
LO_EL_TABLE = LO_ND_TABLE->GET_ELEMENT( ).
@TODO handle not set lead selection
IF LO_EL_TABLE IS INITIAL.
ELSE.
*Raise the error message
ENDIF.
Yogesh N

Similar Messages

Select all values from field in LOV

I need to create a LOV in Discoverer that works as follows: I have 4 values in a dimension, but I want the user could select another value, something as 'all'. This value includes the values in the dimension table and any other value in the relationed fields.
For example, I have four values, A,B,C and D. But I want to add another value, 'All' that matches this four values as any other one. How can I do that?
Thanks in advance.

Hi Javier,
When you create a parameter, you have the option to let the user to enter multiple values. Therefore, if you have a LOV, the user can select one or multiple or all values.
Regards,
John

How to select several values from a user exit variable in a planning folder

Hello,
I have created a user exit variable for limiting the values only to which the user need to access.
For a simulation part, it is then necessary for him to select several values from these values (not only one, and not all)
But It seems in this case the user has only two possibilities :
- keep all the values without any restriction
- restrain the selection to only one value.
It seems possible for the user to access to a multiple choice window, but this possibility doesn't seems to work : in all tests we did, only the first value was taken into account by BPS.
If this method is not good do you know an other manner to permit the user to choice several values amongst a set of pre-selected (because the original set is too important) values ?
Thanks for your help.

Hi Mayank,
Thanks for your response, but I don't think it corresponds to my problem.
I my case, I use a user exit variable to filter some data. It seems BPS offers the possibility to the user to select several values amongts the pre-selected values presented by the user exit variable, but it doesn't work. We can use a popup in which we enters the required values, but in final, only the first value is taken into account.
I don't know if it is due to a BPS bug or if it is not a good solution in regard to BPS philosophy. In this case, the concerned caracteristic isn't in the header but in lead columns.
I must present a solution to my client next monday, so I have not enough time to open an OSS message.
An alternate solution should be interesting too.
My need is to present to a user a selection of values amongst all values from an infoobject (the user exit variable seemed to be a good solution) and the user must have the possibility to select some values amongst these as filter.
Regards

Refresh PL/SQL Report Region (not Page) using Select List value

Hi,
I've got a report region based on a 'PL/SQL function body returning a SQL query'which gets generated on selecting a value from a Select list item, The Select List action is 'Redirect and Set value' but this causes the whole page to refresh rather than just the report region. I've tried to refresh the report only using a dynamic action on the Select List item (Action now reset to 'None') but now the report is not appearing on choosing from the List. Can anyone suggest a solution that will allow me to refresh this report without refreshing the page? I am using APEX 4.2.2 and the report syntax is as follows:
DECLARE
v_statement VARCHAR2(500);
BEGIN
SELECT query_text
    INTO v_statement
   FROM sql_queries
   WHERE query_id = :P2_QUERY ;
   RETURN v_statement ;
END ;
where P2_QUERY is Select List Item,
regards,
Kevin.

KevinFitz wrote:
The report region being displayed is conditional on P2_QUERY item being NOT NULL. I assume the region not appearing is because the Action for the Select List Item is set to None and so P2_QUERY is always NULL.
No, the region is not appearing because it is conditional on P2_QUERY being NOT NULL. This means that the report region never exists on the page shown in the browser, so it can't be dynamically refreshed. (Dynamic refresh doesn't evaluate region conditions, and it only re-renders the report content, not the entire region.)
Remove the condition on the report region, check the refresh is working, then reconsider exactly what the requirements here are. If you want the region to appear only when P2_QUERY has a value, and you want it to be refreshed without submitting and re-rendering the page, then the region needs to be hidden rather than conditionally rendered, and shown via a dynamic action when P2_QUERY gets a value.
I tried adding an additional Set Value True Action for the DA event but got an error as listed above,
All irrelevant if Page Items to Submit on the region is used properly.

Select-options - select multiple values from personal value list

Hi experts,
In my application, I am using select-options. I select the values required from the search help into the personal value list . I want to copy these values from the personal value list into my ranges table. Do I have to copy them one row at a time. Is there any way to select the values directly into the ranges table of the select-options field?
Regards,
Abdullah.

Boy, this is something we're struggling with too. So we'd like to hear others' ideas on this also.
thank you,
iggy

JOB_SUBMIT with Selection Screen Value

I have a requirement :
with other select-options and parameters, i have two radio button, Foreground and Background:
when Background radio button will be selected program should be scheduled as a background job.
How i will pass selection screen value in JOB_SUBMIT ??
Cheers.
Srikanta

Hi ,
Try This
*& Report ZMMVB_PG_SL_CHANGE_BDC
REPORT zmmvb_pg_sl_change_bdc.
TABLES : mara,t133a,marc.
DATA i_t133a LIKE t133a OCCURS 0 WITH HEADER LINE.
DATA : BEGIN OF itab OCCURS 0,
 matnr LIKE marc-matnr,
 werks LIKE marc-werks,
 ekgrp LIKE marc-ekgrp,
 END OF itab.
DATA : BEGIN OF itab1 OCCURS 0,
 matnr LIKE marc-matnr,
 werks LIKE marc-werks,
 dispo LIKE marc-dispo,
END OF itab1.
DATA : fname LIKE ibipparms-path ,
 ename TYPE string,
 mode.
DATA: BEGIN OF it_t133a OCCURS 0,
 bilds LIKE t133a-bilds,
 pstat LIKE t133a-pstat,
 guifu LIKE t133a-guifu,
 auswg LIKE t133a-auswg,
 END OF it_t133a.
DATA: ctr TYPE i,
 ctr_s(2) TYPE n,
 wrk(35),
 ch(1),
 viewno(2) TYPE n,
 guifu LIKE t133a-guifu.
DATA: BEGIN OF it_views OCCURS 30.
 INCLUDE STRUCTURE mbildtab. " Selection Views
DATA: END OF it_views.
DATA bdc_data LIKE bdcdata OCCURS 0 WITH HEADER LINE.
SELECTION-SCREEN BEGIN OF BLOCK b WITH FRAME TITLE text-000.
PARAMETERS : ek RADIOBUTTON GROUP rg1 ,
 sl RADIOBUTTON GROUP rg1
SELECTION-SCREEN END OF BLOCK b.
SELECTION-SCREEN BEGIN OF BLOCK c WITH FRAME TITLE text-001.
PARAMETERS : fg RADIOBUTTON GROUP rg2 DEFAULT 'X',
 bg RADIOBUTTON GROUP rg2.
SELECTION-SCREEN END OF BLOCK c.
START-OF-SELECTION.
IF fg = 'X'.
 mode = 'A'.
ELSEIF bg = 'X'.
 mode = 'E'.
ENDIF.
IF ek = 'X'.
 guifu = 'SP09'.
 PERFORM bdc_ekgrp_change.
ELSEIF sl = 'X'.
 guifu = 'SP12'.
 PERFORM bdc_mrpcontroller_change.
ENDIF.
*& Form BDC_EKGRP_CHANGE
* text
* --> p1 text
* <-- p2 text
FORM bdc_ekgrp_change .
CALL FUNCTION 'F4_FILENAME'
 EXPORTING
 program_name = sy-repid
 dynpro_number = sy-dynnr
 field_name = ' '
 IMPORTING
 file_name = fname.
IF NOT ( fname IS INITIAL ) .
 ename = fname .
ENDIF.
CALL FUNCTION 'GUI_UPLOAD'
 EXPORTING
 filename = ename
 filetype = 'DAT'
 TABLES
 data_tab = itab
 EXCEPTIONS
 file_open_error = 1
 file_read_error = 2
 no_batch = 3
 gui_refuse_filetransfer = 4
 invalid_type = 5
 no_authority = 6
 unknown_error = 7
 bad_data_format = 8
 header_not_allowed = 9
 separator_not_allowed = 10
 header_too_long = 11
 unknown_dp_error = 12
 access_denied = 13
 dp_out_of_memory = 14
 disk_full = 15
 dp_timeout = 16
 OTHERS = 17.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF itab[] IS NOT INITIAL.
 LOOP AT itab.
 REFRESH bdc_data.
 IF itab-matnr NA sy-abcde AND itab-matnr NA '/*-_.'.
 UNPACK itab-matnr TO itab-matnr.
 ELSE.
 TRANSLATE itab-matnr TO UPPER CASE.
 ENDIF.
 SELECT SINGLE * FROM mara WHERE matnr = itab-matnr.
 IF sy-subrc NE 0.
 CONTINUE.
 ENDIF.
 PERFORM view_routine.
 PERFORM bdc_dynpro USING 'SAPLMGMM' '0060'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'RMMG1-MATNR'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'RMMG1-MATNR'
 itab-matnr.
 CONCATENATE 'MSICHTAUSW-DYTXT(' viewno ')' INTO wrk.
 CONDENSE wrk NO-GAPS.
 PERFORM bdc_dynpro USING 'SAPLMGMM' '0070'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 wrk. "'MSICHTAUSW-DYTXT(08)'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=ENTR'.
 CONCATENATE 'MSICHTAUSW-KZSEL(' viewno ')' INTO wrk.
 CONDENSE wrk NO-GAPS.
 PERFORM bdc_field USING wrk "'MSICHTAUSW-KZSEL(08)'
 'X'.
 PERFORM bdc_dynpro USING 'SAPLMGMM' '0080'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'RMMG1-WERKS'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=ENTR'.
 PERFORM bdc_field USING 'RMMG1-WERKS'
 itab-werks.
 PERFORM bdc_dynpro USING 'SAPLMGMM' '4000'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=BU'.
* PERFORM bdc_field USING 'MAKT-MAKTX'
* '"HEX BOLT M16X1.5X100,B8.8,BP"'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'MARC-EKGRP'.
* PERFORM bdc_field USING 'MARA-MEINS'
* 'NOS'.
 PERFORM bdc_field USING 'MARC-EKGRP'
 itab-ekgrp.
* PERFORM bdc_field USING 'MARA-MATKL'
* '1702'.
* PERFORM bdc_field USING 'MARC-USEQU'
* '3'.
* PERFORM bdc_field USING 'MARC-KORDB'
* 'X'.
 CALL TRANSACTION 'MM02' USING bdc_data MODE mode UPDATE 'S'.
 ENDLOOP.
ENDIF.
ENDFORM. " BDC_EKGRP_CHANGE
*& Form BDC_MRPCONTROLLER_CHANGE
* text
* --> p1 text
* <-- p2 text
FORM bdc_mrpcontroller_change .
CALL FUNCTION 'F4_FILENAME'
 EXPORTING
 program_name = sy-repid
 dynpro_number = sy-dynnr
 field_name = ' '
 IMPORTING
 file_name = fname.
IF NOT ( fname IS INITIAL ) .
 ename = fname .
ENDIF.
CALL FUNCTION 'GUI_UPLOAD'
 EXPORTING
 filename = ename
 filetype = 'DAT'
 TABLES
 data_tab = itab1
 EXCEPTIONS
 file_open_error = 1
 file_read_error = 2
 no_batch = 3
 gui_refuse_filetransfer = 4
 invalid_type = 5
 no_authority = 6
 unknown_error = 7
 bad_data_format = 8
 header_not_allowed = 9
 separator_not_allowed = 10
 header_too_long = 11
 unknown_dp_error = 12
 access_denied = 13
 dp_out_of_memory = 14
 disk_full = 15
 dp_timeout = 16
 OTHERS = 17.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF itab1[] IS NOT INITIAL.
 LOOP AT itab1.
 REFRESH bdc_data.
 IF itab1-matnr NA sy-abcde AND itab1-matnr NA '/*-_.'.
 UNPACK itab1-matnr TO itab1-matnr.
 ELSE.
 TRANSLATE itab1-matnr TO UPPER CASE.
 ENDIF.
 SELECT SINGLE * FROM mara WHERE matnr = itab1-matnr.
 IF sy-subrc NE 0.
 CONTINUE.
 ENDIF.
 PERFORM view_routine.
 PERFORM bdc_dynpro USING 'SAPLMGMM' '0060'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'RMMG1-MATNR'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'RMMG1-MATNR'
 itab1-matnr.
 CONCATENATE 'MSICHTAUSW-DYTXT(' viewno ')' INTO wrk.
 CONDENSE wrk NO-GAPS.
 PERFORM bdc_dynpro USING 'SAPLMGMM' '0070'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 wrk. "'MSICHTAUSW-DYTXT(11)'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=ENTR'.
 CONCATENATE 'MSICHTAUSW-KZSEL(' viewno ')' INTO wrk.
 CONDENSE wrk NO-GAPS.
 PERFORM bdc_field USING wrk "'MSICHTAUSW-KZSEL(11)'
 'X'.
 PERFORM bdc_dynpro USING 'SAPLMGMM' '0080'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'RMMG1-WERKS'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=ENTR'.
 PERFORM bdc_field USING 'RMMG1-WERKS'
 itab1-werks.
 PERFORM bdc_dynpro USING 'SAPLMGMM' '4000'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=BU'.
* PERFORM bdc_field USING 'MAKT-MAKTX'
* '"HEX BOLT M16X1.5X100,B8.8,BP"'.
* PERFORM bdc_field USING 'MARA-MEINS'
* 'NOS'.
* PERFORM bdc_field USING 'MARC-DISGR'
* '701'.
* PERFORM bdc_field USING 'MARC-EKGRP'
* 'A00'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'MARC-DISPO'.
* PERFORM bdc_field USING 'MARC-DISMM'
* 'PD'.
 PERFORM bdc_field USING 'MARC-DISPO'
 itab1-dispo.
* PERFORM bdc_field USING 'MARC-DISLS'
* 'MB'.
 CALL TRANSACTION 'MM02' USING bdc_data MODE mode UPDATE 'S'.
 ENDLOOP.
ENDIF.
ENDFORM. " BDC_MRPCONTROLLER_CHANGE
*& Form bdc_dynpro
* text
* -->PROGRAM text
* -->DYNPRO text
FORM bdc_dynpro USING program dynpro.
CLEAR bdc_data.
bdc_data-program = program.
bdc_data-dynpro = dynpro.
bdc_data-dynbegin = 'X'.
APPEND bdc_data.
ENDFORM. "BDC_DYNPRO
* Insert field *
FORM bdc_field USING fnam fval.
CLEAR bdc_data.
bdc_data-fnam = fnam.
bdc_data-fval = fval.
APPEND bdc_data.
ENDFORM. "BDC_FIELD
*& Form VIEW_ROUTINE
* text
* --> p1 text
* <-- p2 text
FORM view_routine .
CLEAR viewno.
SELECT * FROM t133a INTO CORRESPONDING FIELDS OF TABLE i_t133a
 WHERE bilds = '21' AND guifu LIKE 'SP%' .
LOOP AT i_t133a .
 ch = i_t133a-pstat.
 IF mara-vpsta NA ch .
 DELETE i_t133a .
 CONTINUE .
 ENDIF .
ENDLOOP.
SORT i_t133a BY guifu ASCENDING .
LOOP AT i_t133a .
 viewno = viewno + 1 .
 IF i_t133a-guifu = guifu .
 EXIT .
 ENDIF .
ENDLOOP .
ENDFORM. " VIEW_ROUTINE
Regards,

How can i select multiple values form select list

Hi ,
I have created few items in a page and all items are Lov items and based on these items stacked charts will display. My requirement is I need to select multiple values form LOV's
Eg: In Interactive report goto filter and select an item and expression as IN and select multiple items and i need to select multiple values like this.
Please anybody help me how to get multiple values.
I have one more doubt Can we have a Print preview option in APEX.
I have to see print preview for stacked charts. is it possible?
Regards
Narender B

HI ,
Thank you for valuable information and looks good.but Here our client need to select multiple values.... for eg: Open IR report and click on Actions button --->select filter
select any column , operator as IN and from expression select multiple items.
I need to select multiple values in that way so, could you please guide me how can i achieve this.
Regards
Narender B

How to get the selected node value of a tree which is build on java code

Hi Experts,
How can i get the selected node value if I build the tree programatically.
I am using the following code in selectionListener but it is throwing error.
RichTreeTable treeTable = (RichTreeTable)getQaReasontreeTable();
CollectionModel _tableModel =
(CollectionModel)treeTable.getValue();
RowKeySet _selectedRowData = treeTable.getSelectedRowKeys();
Iterator rksIterator = _selectedRowData.iterator();
String selectedQaCode ="";
while (rksIterator.hasNext()) {
List key = (List)rksIterator.next();
JUCtrlHierBinding treeTableBinding =
(JUCtrlHierBinding)((CollectionModel)treeTable.getValue()).getWrappedData();
JUCtrlHierNodeBinding nodeBinding =
treeTableBinding.findNodeByKeyPath(key);
String nodeStuctureDefname =
nodeBinding.getHierTypeBinding().getStructureDefName();
selectedQaCode = selectedQaCode + nodeBinding.getAttribute(0);
where I am using following link to create a tree with java code.
http://one-size-doesnt-fit-all.blogspot.com/2007/05/back-to-programming-programmatic-adf.html
Please help me in resolving this issue.
Regards
Gayaz

Hi,
you should also move
JUCtrlHierBinding treeTableBinding =
(JUCtrlHierBinding)((CollectionModel)treeTable.getValue()).getWrappedData();
out of the while loop as this is not necessary to be repeated for each key in the set
Frank

How to Select a value from DropDownByIndex -Urgent

Hi All,
I have dropdownbyindex UI elements in my Views, I get values from BAPI. When click records in a table, It goes to another view to display full record. Here i have dropdownbyIndexes So it should select one of appropriate value in dropdownbyindex based on record(Value) in table.
Example:
In Table View
id title status priority
10000 webDynPro New Low
Detail View:
id 10000
title webDynPro
Status New [New,Old,Open,Closed]---DropDownbyIndex
Priority Low [High,Low,Medium]---DropDownByIndex..4m BAPI
How to select Appropriate Values from DropdownbyIndex. if any one has sample code, that will be helpful.
Note: I am using Model Nodes
Thanks and Regards
Ravi Golla

Hi Ravi,
In details view, you will have corresponding context node created for Status and priority dropdown fields.
Let suppose, context node for Status is, StatusNode.
value attribute inside this is,
StatusNode
|_ StatusAttrib
Now, you need to write following code to set l_status ="LOW" value in it.
wdContext.nodeStatusNode().moveFirst();
for(int i=0; i<wdContext.nodeStatusNode().size(); i++)
 if(wdcontext.currentStatusNodeElement().getStatusAttrib().equals(l_status)
 wdContext.nodeStatusNode().setLeadselection(i);
 break;
wdContext.nodeStatusNode().moveNext();
write same code for priority also.
Let me know if it is not working with you.
regards,
Bhavik

Getting error while selecting LOV value

Hi all,
I am getting the below error in R12 apps while selecting the lov value from list (But it is working properly in 11i apps and loacal jdeveloper.)
Error: Stale Data
The requested page contains stale data. This error could have been caused through the use of the browser's navigation buttons (the browser Back button, for example).
Cause:
The view object ProjectInformationAM.EmployeeLOVVO1 contained no record. The displayed records may have been deleted, or the current record for the view object may not have been properly initialized.
To proceed, please select the Home link at the top of the application page to return to the main menu. Then, access this page again using the application's navigation controls (menu, links, and so on) instead of using the browser's navigation controls like Back and Forward.
The lov query is select employee_number,full_name from per_all_people_f
I have tried both internal and external lov but both cases it is showing the error in R12
I have used below code in PR of create page, still no use
if(!am.getEmployeelovVO1().isPreparedForExecution())
am.getEmployeelovVO1().executeQuery();
Row row1 = am.getEmployeelovVO1().createRow();
am.getEmployeelovVO1().insertRow(row1);
row1.setNewRowState(Row.STATUS_INITIALIZED);
Except this lov all lov's working properly,
Any one help on this it is very very urgent....
Thanks

Hi,
I had a similar issue just now, and we fixed it in this way. But the case is probably different compared to your situation.
Situation:
- custom inquiry page
- case: manual search, so not results based or Auto Customization Criteria
- multiple search criteria fields
- separate AM for all the LOV fields
- each LOV has its own VO
- Results table on same page, but with its own VO
- each search criteria field has Lov mapping to the corresponding external Lov region
Issue: when selecting a value via the Lov and coming back into the search page, I received the stale data error.
searched lots of places and finally figured out what was wrong in my case.
Each search field had its BC4J properties set to the VO of the results table. And since we wanted to make a manual search thing, this is not good.
Removing the View Instance value and the View Attribute value in the properties of the search fields resolved the error.
Hoperfully this can help other beginners, like me, in finding a solution for the same mistakes... :)
regards
Ronny

ABAP Query - Selection Screen Values Usage

Hi,
I have created an ABAP Query. For one of the selection-screen fields (CAUFV-FTRMI)
which is select-options, I want to use the values during coding (in the where clause of a select query)
in Extras section under the event "record processing". Please suggest how to make the the selection-screen values
available during record processing event. Thanks in advance.
Regards,
Tejas Savla

Hi Kartik,
I need to fetch data from some table KEKO depending on the values entered on the selection-screen for the field CAUFV-FTRMI. So, I need to find a way by which the selection-screen input values are available in the record processing event. The values are available in some variable SP$00002 of the automatically generated report program. But, this variable cannot be used in the Coding section of the ABAP QUERY. Please advise.
Thanks & Regards,
Tejas Savla

InfoSet Query - Long Description while selecting variable values

Dear Experts,
We have an InfoSet Query on different InfoObjects like 0CUSTOMER, 0CUST_COMPC etc and the common link between these InfoObjects is CUSTOMER.
We have a variable created on this CUSTOMER. The requirement is that when this query is executed, user should be able to select a value of Customer (F4 help) and at that time, he should be able to view both Key and Long Text of Customer.
We know that if we change the CUSTOMER InfoObject --> BEx Properties tab, then we can display Long Text and Key in Query Selection Screens. However we can not do that because it would affect all queries in which this InfoObject is used.
If we go to Query Design, and choose "Long Text and Key" in properties of Customer, then system displays Long Text and Key of Customer but after the report execution is done.
We want to display the Long Text of Customer to User at the time of selection and that too without making any InfoObject level change.
If it was InfoProvider, we could have done it using "Provider specific properties of Characteristic" option. But this is InfoSet and that option does not appear here.
Please suggest the solution.
Regards
P

Rohit,
Are you looking to display long text for infoobject instead of short description ?
Then go tp rsd1>infoobject>display/change-->master data/texts -->text table properties -->check long text exists.
It supports a long text field with a length of 60 characters
Activate the infoobject
--Doodle
Message was edited by: Doodle

Parameter weirdness: Report not using user selected parameter value

I am writing my first report and cannot for the life of me figure out how to deal with this issue.
When I call a report and pass the parameters in, it appears that the user cannot then change the parameter values and run the report again even though the parameters are displayed. When user hits run report, the values revert to what was passed in by original
call.
Scenario
Report B has Parameter Period : Month, Quarter, Year displayed in a drop down list.
Report A calls Report B and passes it the parameter: Quarter.
Report B loads. User now changes parameter to Year via the drop down parameter list and hits Run Report.
Instead of loading the report with user selected value (Year), it reverts back to the parameter it was called with, Quarter.
I have tried changing the refresh option on the parameter to always, but no joy.
The only way that seems to work is to put textboxes on the report to change the parameter.
How can I stop this behaviour, and use the users new selection.
This should be really straight forward, and its driving me nuts that its not allowing the user to change the parameters
Any help would be much appreciated.
Thanks Jon

Hi Jon,
Did you use SSRS 2012? Based on my test, the issue is occurred in SSRS 2012 Business Intelligence Development Studio (BIDS). When we deploy the report to report server, it will disappear.
In this situation, we can add another duplicate parameter to work around this issue. Please add two parameters in the report, and then hide one of the parameter. We can pass the parameter value to the hide parameter. If we want to select other values, we
can change the visible parameter values.
Alternatively, I recommend you that submit this suggestion at
https://connect.microsoft.com/SQLServer/. If the suggestion mentioned by customers for many times, the product team may consider to add the feature in the next SQL Server version. Your feedback is valuable for us to improve our products and increase the
level of service provided.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Filtering internal table using select-option values

Hi,
I got an internal table with select-option values. for eg. it_perno with the values I BT 000160 000170.
Now i got another second internal table which is have the person number. Now i need to filter this second internal table based on the values from the select option table. my question is
i can collect all the values from 160 to 170 in a separate table by looping over the select option table. and then based on the values filter the second internal table person number.
But what would be the case if the select option contains both intervals and multiple options. For eg.
I BT 000160 000170.
I EQ 000185.
So can you suggest any good solution, that based on this select option table i need to filter the second internal table Person number.
Thanks in advance.
Regards,
anbu.

Hi,
Can you not use the select-options in the Select query while populating the internal table.
SELECT pernr FROM pa0000 INTO it_tab WHERE pernr IN s_pernr.
If you cannot do this and you do not want to delete the unwanted entries, then you can use the WHERE clause in the LOOP statement to process the specific entries required:
LOOP AT it_tab INTO wa_tab WHERE pernr IN s_pernr.
Regards,
Aparna Alashe.

Problem in passing selection screen values using CALL TRANSACTION.

Hi All
I am facing problem in transfering selection screen values to the called transaction. I am trying to pass the path of the transaction filer but to no avail. The variable for filepath is not empty.
Below is my code:
DATA: lt_bdcdata TYPE TABLE OF bdcdata,
       wa_bdcdata TYPE bdcdata,
       opt TYPE ctu_params.
CLEAR wa_bdcdata.
wa_bdcdata-program = 'RFBASM00'.
wa_bdcdata-dynpro   = '1000'.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_CURSOR'.
wa_bdcdata-fval = 'RFPDO1-FEBUMSF'.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'RFPDO1-FEBUMSF'.
wa_bdcdata-fval = gv_filepath.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_OKCODE'.
wa_bdcdata-fval = 'PASS'.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
opt-dismode = 'E'.
opt-updmode = 'S'.
CALL TRANSACTION 'FF_5' USING lt_bdcdata OPTIONS FROM opt.
Please help.
Harsh

Hi Harsh,
I think you have entered wrong main program for tcode 'FF_5' and wrong screen field for the file name. Use the below code instead of yours.
DATA: lt_bdcdata TYPE TABLE OF bdcdata,
       wa_bdcdata TYPE bdcdata,
       opt TYPE ctu_params,
       gv_filepath type char128 value 'C:\testfile.txt'.
CLEAR wa_bdcdata.
wa_bdcdata-program = 'RFEBKA00'.
wa_bdcdata-dynpro   = '1000'.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_CURSOR'.
wa_bdcdata-fval = 'UMSFILE'.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'UMSFILE'.
wa_bdcdata-fval = gv_filepath.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
*wa_bdcdata-fnam = 'BDC_OKCODE'.
*wa_bdcdata-fval = 'PASS'.
*APPEND wa_bdcdata TO lt_bdcdata.
*CLEAR wa_bdcdata.
opt-dismode = 'A'.
opt-updmode = 'S'.
CALL TRANSACTION 'FF_5' USING lt_bdcdata OPTIONS FROM opt.
Thanks.
Regards,
Jey

Regarding selection of value

Similar Messages

Maybe you are looking for