Regarding semi colon seperated file for upload

Hi Friends,
I have an requirement where in to upload text files from presentation server which is semi colon seperated.
I am able to upload to the internal table using GUI_UPLOAD, but the problem is sometimes in the text file one line can be in two lines where in the system takes it as two different lines of records.
Could anyone suggest a logic to correct this.

Hi,
Use the below blog, it may help you...
http://abaplog.wordpress.com/2007/08/15/reading-a-comma-delimited-file-in-abap-aka-csv-file/
http://www.kyusl.com/ilya/csv.html
You may need to adopt it to parse semicolon.
Regards
Karthik D

Similar Messages

  • What is the difference between: "Place..." or "Add files for Upload..."?

    Where can I get information about the detailed differences between the commands "Place..." and "Add Files for Upload..." of the Files menu?
    Understand that in both cases the files are linked and not embedded. But what further differences are there?
    I came across this issue because widget 039 (Animated Image Rollovers) from MuseThemes works only if you use the "Add Files for Upload..." option.
    Thanks,
    Daniel

    Hi Daniel,
    There are a few differences in both the options-
    Place is used to add content to page (rendered) while Add Files for Upload... is used to upload files to your site but not on page (not rendered).
    Placed images are published to /images folder on the server while images added using Add Files for Upload... option are published to the /assets folder on the server.
    Placed images have a chance of getting renamed (if resized/interpolated in Muse) upon publish while images added using Add Files for Upload... retain their names.
    Place can be used to add limited file formats like jpg/png/psd/swf/oam etc while you can upload almost any type of file using Add Files for Upload...
    You don't see Placed content in the Hyperlinks dropdown for linking while files added using Add Files for Upload... show up in the Hyperlinks dropdown so that you may link to them and allow download.
    Both serve different purposes and Add Files for Upload... is preferred by Widget Developers because it gives more control over uploaded content and assurance that file location and name will be as expected.
    Hope the above give you clarity on the basic difference.
    Cheers,
    Vikas

  • ADD FILES FOR UPLOAD - IMAGE PATHS DO NOT WORK IN WIDGETS

    Hi There
    I'm trying to add my own images to a widget I bought from Qooqee - the Wrapper_v2 image slider. But when I try to add my own images with the image path it doesn't work. I've tried adding the image with 'Add Files for Upload' - and then using the full path which I get from right clicking on it in the assets panel - but it still doesn't work.
    Most of the widgets require you to either specify the image path, or an external URL. I do not want to use a third party image hosting site to get URL's for every image I want to use on the site - so I just need to know what I'm doing wrong with the Add files for Upload - why do my file paths not work in the widgets?

    Provide the name of the program you are using so a Moderator may move this message to the correct program forum
    This Cloud forum is not about help with program problems... a program would be Photoshop or Lighroom or Muse or ???
    Also, you need to ask for help from the widget maker

  • What flash player to use on iPad 2 that is similar to Adobe Flash Player?  Need this to choose files for upload of assignments to my online university.  I started my profile using my iPad 2 and couldn't choose a picture to upload as well.  Hmm

    What flash player to use on iPad 2 that is similar to Adobe Flash Player?  Need this to choose files for upload of assignments to my online university.  I started my profile for this site using my iPad 2 and couldn't choose a picture to upload as well.  Hmm

    There is no "flash player similar to Adobe Flash Player". Flash is a proprietary Adobe product. There is currently no version of Flash for iOS.

  • How to Remove Files for Upload?

    So, now that I've added files for upload, now I wish to change direction, how do I remove files that have been Added to Files for Upload to reduce clutter?

    That's exactly what I was looking for...thank you so much!!

  • Can't select files for uploading through Flash Player

    I can only say that this seems to be related to Flash Player, but I'm not 100% sure exactly what the cause of the problem is.
    On most sites that uses a Flash uploader it won't allow me to select files for uploading. When I get to the Select A File dialogue box
    all files are greyed out. This happens in Chrome, Firefox and Safari. I'm using the latest version of Mac OSX. I can't seem to find
    any information about this anywhere on the web.

    Make sure Java and Javascript are both turned on in Safari Preferences/Security.

  • What setting should I use to save file for upload to youtube

    Hi,
    the link below is the video on youtube that I just saved using the first setting that I always use using Flash.  Now because of the change over, as we have discussed I have to save the file then upload it for sites I upload to after the change.  I know I can save it on the For Windows one but it is not HD.  As you will see when you play this video it is all shakey (and not because I am shaking the camera   ).
    The other link is the non shakey saved for windows version.
    http://www.youtube.com/watch?v=lfjoqXIm2q0 Flash
    http://www.youtube.com/watch?v=i2OwQ3GTSPE (saved For Windows)
    Should I just resign my self to using the work around and use the save for Windows and not the FLASH.  or is there a setting I can use that gets rid of the shake.   However, since most of what I post is for people trying to sell their horses I would like the best quality I can get up on YouTube.
    Thanks for your help.  I really do appreciate it very much.  Saves me hours of time.
    Sarah

    Because YouTube is so unpredictable -- and always changing it encoding systems -- your best bet is to use the workaround and output as a WMV file.

  • How come Flex Builder does not complain when semi-colons are omitted for AS3 statements?

    Hi, I was wondering why my flexbuilder3 plugin for eclipse does not complain when and if I leave off a semi-colon at the end of an AS3 statement.  Has anybody else experience this in their flex environments?
    What can I do to fix this; as this is very annoying.
    Thanks in advance!
    Tonté

    Hm...  I see.  Thank you all for your replies.  I didn't realize AS3 does not require semi-colons at the end of AS3 statement unless there is more than one statement on the line.  I will have to double check this for my self and report back.  I guess I can't shake my Java habbits.
    Thanks again!
    Happy Flexing!
    Tonté

  • Flagging modified files for uploading later

    Is there any way in Dreaweaver 8 to flag or mark files that
    have been modified and are ready to be uploaded?
    With large updates, there may be dozens of files in dozens of
    different folders, all of which must be uploaded at once but which
    may take many dates to create/modify. In a team environment, many
    other files may have been changed in the same timeframe, for other
    unrelated changes.
    It seems silly to have to keep paper or external logs of
    changed/new files in a project. Is there a mod or add-in that
    allows files to be ticked/flagged/marked as being part of a
    particular upload batch?
    Tony

    Hi John,
    Unfortunately, the Edit > Select options won't work well
    for us, as they will still pick up not only the files I have
    added/changed, but also those of all the other team members. Also,
    they cannot distinguish between completed files and work in
    progress.
    No, we are not using Check In/Check Out. We have discussed
    it, but our network and server environment is quite complex and it
    just won't work for us. Our local machines are in danger of being
    wiped at any time to rectify a problem (we are on a standard
    operating environment). We have three servers for the internet
    (development, test and production) and four for the intranet
    (development, test, production and live - oddly enough). This means
    that when we finish changes in dev, we PUT them to test, not to
    production/live. At the moment, the only real way we have to track
    completed work is PUTting the files to test. All files in test
    which are different from production can be sent live. But it's not
    an ideal situation.
    Overwriting is a real issue for us. There are, of course,
    many common pages. When working on any page, there is likely to be
    a common index page and common includes also involved, that could
    be being modified by someone else. When we were all in one
    workspace, it was easy to communicate. Now we are split over two
    workspaces and it's much harder to know who is working on what.
    We'd like to add some kind of version control system, but
    they all require changes to our server structures to operate
    effectively. Our servers are shared with three other departments,
    so they are very difficult to change.
    Regards
    Tony

  • Prime Infrastructure 2.0 is not accepting ubf patch file for upload

    Hi,
    After successfully installing Prime Infrastructure 2.0 on a single server via OVA file in ESX, i tried to install all the latest patches.
    - pi_update_2.0-3.zip was installed successful
    But for the patch "pi_dev_pack_update_2.0-10.ubf" i was not be able to do the file-upload via the Web-GUI.
    Is there anyone who knows how to put this file on the Prime server and how to install this patch via CLI ?
    Cisco Application Deployment Engine OS Release: 2.0
    ADE-OS Build Version: 2.0.6.003-px-build
    ADE-OS System Architecture: x86_64
    Copyright (c) 2005-2010 by Cisco Systems, Inc.
    All rights reserved.
    Hostname: xxxxxxx
    Version information of installed applications
    Cisco Prime Infrastructure
    Version : 2.0.0.0.294
    Kind regards,
    Danjan Mudde.

    Hi Danjan,
    ****These patches cannot be applied via cli and can only be applied from GUI of Prime*****
    Go to the link below and download the "pi_dev_pack_update_2.0-10.ubf"
    http://software.cisco.com/download/release.html?mdfid=284422771&flowid=45323&softwareid=28
    4272933&release=2.0.10&relind=AVAILABLE&rellifecycle=&reltype=all
    After downloading the file, go to "Administration > Software Update", click upload
    update file, browse to the file location that you've downloaded. 
    Once the file has beenuploaded, you can select the update and click install. 
    After installing, it shouldindicate "Pending Restart" = Yes.  You will likely need to
    go to the cli and do an "ncs stop" and then "ncs start".
    Hope it will help
    Thanks-
    Afroz
    [Do rate the useful post]

  • Conversion of an excel file into a CSV 2.0 file for uploading in CCM 2.0

    Hi guys,
    We are downloading content from SAP R/3 into an excel spread sheet.
    We are uploading this content in a CSV file 2.0 into CCM 2.0
    the csv file we use today we are arming manualy because of the difference in structure between excel and CSV 2.0. We would like to be able to convert easily the excel file in a CSV file. How can one do this.
    Example of our csv-file:
    SAP CATALOG CSV 2.0 <,>FULL,,,,,,,,,,,,,,
    DEFAULTS,ES,,,,,,,,,,,,,,
    Model,,,,,,,,,,,,,,,
    DataType,String_ID,String,,,,,,,,,,,,,
    Characteristic,Z_COMPANY,/CCM/ID,,,,,,,,,,,,,
    Characteristic,Z_DOC_TYPE,/CCM/ID,,,,,,,,,,,,,
    Characteristic,Z_DATE,STRING_ID,,,,,,,,,,,,,
    Characteristic,Z_SUPPLIER_ID,/CCM/ID,,,,,,,,,,,,,
    Characteristic,Z_MARCA,/CCM/DESCRIPTION,,,,,,,,,,,,,
    Schema,ENTEL,Z_COMPANY,Z_DOC_TYPE,Z_DATE,Z_SUPPLIER_ID,Z_MARCA,{}ENTEL,,,,,,,,,,,
    Category,PRODUCTOS ENTEL,,,,{}ENTEL PRODUCTS,,,,,,,,,,
    Category,A.B.G INGENIERIA S.A.,PRODUCTOS ENTEL,,{}A.B.G. INGENIERIA S.A.,,,,,,,,,,,
    Content,,,,,,,,,,,,,,,
    ItemValuation,parent cty,/ccm/supplier_part_no,/ccm/base_uom,/ccm/order_unit,/ccm/price[1]#/ccm/amount,/ccm/price[1]#/ccm/currency_code,Z_DOC_TYPE,/ccm/supplier_name,/ccm/contract_id,/ccm/contract_item_id,Z_MARCA,/ccm/short_description,Z_SUPPLIER_ID,/ccm/product_group,/ccm/product_id,Z_DATE,Z_COMPANY
    1,A.B.G INGENIERIA S.A.#ENTEL,61,PCE,PCE,1,UF,ZSV0,A.B.G INGENIERIA S.A.,4410000181,10,ALL,Insp.TTecnica Terreno Servicios Privado,096898120K,A0307S001,3001870,20060111,ENT
    Any advice is welcome,
    Thanks in advance
    Aart

    Hi,
    We are also facing same issue like when we saved data was in CSV formate but now when we open the file then it comes in Text formate.
    Currently file extension is .xls but we tried to change that to .csv but still it opening in text only...
    Regards,

  • Splitting large files for upload

    I need to upload a very large file to an FTP site, 9.8G. This takes a hugely long time with my bandwidth and invariablly fails somewhere before it finishes. Does anyone know if there is software that will take a large file like this, split it up, perhaps into disk images, so that they can be uploaded separately and then reassembled?
    Thanks very much.

    If you perform a web search there are some file splitters available for the Mac, I don't use them.
    Hopefully you will find a suitable one.

  • How to downsize a QuickTime file for uploading?

    I want to upload a short film to vimeo.
    I have made a QuickTime movie by simply exporting to via QuickTime Movie in my Export option (instead of the Quick Time conversion I usually use) in order to have a high quality master.
    The QT movie file weighs 2.13 GB, so it's too big to upload.
    How do I make a copy the is less than 500 MB?
    Can I easily calibrate the size?

    Compressor is the way to go.
    It's actually simple to get going with once you've had a few tries - though it does require an understanding of codecs and the limitations of certain distribution media types, etc. I sometimes think it's more art than science when it comes to getting the best possible results. That said, there is a pre-made setting for online media like youtube and vimeo in Compressor 4 but I've not tried it.
    But anyway, compressor has a built in Help menu, with access to the user guide which is pretty good.
    Help >> Compressor 4 Help >> Compressor 4: User Manual >

  • Creating text file for upload to bank

    Post Author: kevin belyea
    CA Forum: General
    I'm creating a .rpt that requires specific formatting to be uploaded into banking software for automatic payment processing. There are a couple of specifics that I've been stumbling on. Here they are:
    1. I need to remove  the leading $ from a string. The string is displaying as $0000002233 which is correctly stated as a 10-character filed for the amount of $22.33
    2. Any idea on how to format a julian date? For example today's date would be displayed as 07282  (2007 282/365)
    Any help for this new poster would be appreciated.
    Kevin

    Post Author: kevin belyea
    CA Forum: General
    Thanks for the quick reply.
    The first solution worked great. - Thanks
    The second solution worked partially in that it returned the following value 00282. I would like to pickup the last two digits of the year (07). It looks like it is picking up the middle two characters. I tried a couple of variations of the formula but no luck. Any suggestions?
    Kevin

  • .dwt to .html files for upload

    Help! Newbie, designed my site in DW8, and all of my pages
    are .dwt. To upload to remote server for site to work I have to
    convert pages to .html, rename front page as index.html, and redo
    page links. Ok. But when I do this all of my images on the entire
    pages are x'd out (although the links I set up on them with
    hotspots seem to work ok) What to do? Thanks-

    > Help! Newbie, designed my site in DW8, and all of my
    pages are .dwt.
    This means that you have not used Templates correctly.
    > What to do?
    Read DW's F1 help about how to use Templates, and how to
    properly spawn
    child pages - and copy/paste your content from your existing
    pages to the
    newly (and properly) created template child pages.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "glotus" <[email protected]> wrote in
    message
    news:ej2var$93d$[email protected]..
    > Help! Newbie, designed my site in DW8, and all of my
    pages are .dwt. To
    > upload to remote server for site to work I have to
    convert pages to .html,
    > rename front page as index.html, and redo page links.
    Ok. But when I do
    > this
    > all of my images on the entire pages are x'd out
    (although the links I set
    > up
    > on them with hotspots seem to work ok) What to do?
    Thanks-
    >

Maybe you are looking for