Tcode to see the aggregation ratio

Hi Gurus,
Based on aggregation ratio, we decide whether a cube require an aggregate,but what is the tcode to know the aggregation ratio? or is there any log/statistics report for that?
Regards
Anu
Edited by: Anu4SAPBI on Sep 21, 2010 1:28 PM

If the BI statistics are activated for the corresponding query, we can execute the query from RSRT (Debug version) with the option " Display statistics data" chosen, thereby once we execute the query we get the stats details like Session UID, Step UID details etc. And in the statistics data verify the column Event ID for the following events:
9000     Data Manager
9010     Total DBTRANS ( Total records transfered from the database)
9011     Total DBSEL ( Total records read at the database)
For these events 9000,9010, 9011 verify the counter column to check for the Total DBSEL and Total DBTRANS values and event 9000 for the Duration aswell. If DBSEL by the DBTRANS ratio if greater than 10 it is generally recommended we can create aggregates on the cubes to improve the performance of the query.
Also further detailed analysis can be done using the stats data in the tables RSDDSTAT_OLAP and RSDDSTAT_DM tables based on the Session UID, Step UID details. Hope this helps.

Similar Messages

Unauthorized User can see the aggregated result?

Dear all,
I got a problem that, unauthorized user can see the aggregated result.
e.g. A user who is allowed to read data of Sales Office (0SALES_OFF) 0001 only. (It is done in the RSECADMIN already)
Now a cube contains Sales records of Sales office 0001 & 0002 :
Sales Office 0001 Sales Value 3000
Sales Office 0002 Sales Value 2000
When the user execute a query from the cube without any selection criteria, it give the aggregated Sales Value 5000.
But if the user try to drill down for each sales office, it can then give error, because the user are not suppose to see Sales Office 0002 records.
What I expect is an error at the very beginning when the user execute the query, saying the cube contains data that the user is not suppose to see, the user need to put in the correct Sales Office as criteria first.
Is there anyone can help on this issue?? I have no idea how can this happened?
Many Thanks!!!
Chris

Hi,
Now I understood your concern correctly. Unfortunately, I do not have prompt answer for you. So, User should be able to view the aggregated result, but not to irrelevant sales office. If you don't have condition on Aggregated Result, restricting to individual Sales Office can be done in RSECADMIN.
Let's wait for other's opinions.......
Regards,
Suman

Any tcode to see the address of all storage loc

Hi All,
Is there any specific t-code to list all the storage location address

Dear venugopal
I dont think you can see all storage locations address in one shot. Either you run ox09 or se16 table V_TWLAD
thanks
G. Lakshmipathi

Tcode for see AUTHORITY-CHECK asignement for User ?

Hi everybody
1. Does somebody knows a TCode for see an Authorization Object directly, that is i know to see them using SU21, then selecting an Authorization Class and then i see the corresponding Auth.Objetcs. But, is there a Tcode for see the Auth.Objects without see first the Auth.Classes ?
2, Is there a Tcode for see the Auth.Objects and values assigned for a user , that is, a Tcode for evaluate if an AUTHORITY-CHECK is going to be passed by an specific user-object-activity ?
For example, i have the Auth.Object 'M_MATE_WRK' wich uses the Plant (WERKS) object. Is there a Tcode wich allow me to know if a user has asigned this Auth.Object for specified Plant (WERKS) Value, and wich activities does the user has permited ?
Thanks..
Frank

Hello Frank
Call transaction <b>SUIM</b> (User Information System) and check the available reports there. I am sure you will find a report fulfilling your requirement.
Regards
Uwe

Example to help me see the steps in extracting data from IDES R3 to BW?

Hello folks,
I have some documents on extraction but I have not been able to step through successfully.
Can you step me through the process with a simple example:
1. identify an object(table?) on R3; provide typical tcode to see the data in this source
2. steps see the data in this R3 table
3. steps to create an extractor to pull the data we saw in step 2.
4. Steps to go through so that I can see this data in BW
I will appreciate a real example which will help clarify some difficulties I have in extracting data from R3 to BW.
Thanks

1. To see data in the extractor, activate the data sources first and then execute RSA3. For LO extractors, in addition to activating the data sources, fill the set up tables and set the delta process and then execute RSA3.
2. To view data in source tables, you must know the source tables. The best way to find out the source table from where the extractor picks up data, go to help;sap.com - BI content. In the help pages, you will find the source tablles. Once you get the source tables, go to Se16, type the table name and execute. You wil see the data.
3. If you wish to create extractor from the source table, go to RSO2 ( O as orange), choose which data source you wish to create ( master data, texts, hierarchies, transaction data). The steps are explained in the following document. Pl follow the link:
https://websmp206.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000194044&_SCENARIO=01100035870000000202
Or send me a note to my email and I can send this document to you.
Ravi Thothadri
[email protected]

Tcode to see PO details in SRM GUI

What is Tcode to see the PO in SRM GUI.
Thank you
Regards,
Yshu

Hi Chinni,
BBP_POC is the process purchase order in the SRM 4.0 and SRM 5.0 from the SAP GUI equivalent to the one in browser
You need to login as purchaser or whoever has the purchaser role to the SAPGUI and then u will find all the authorized tcodes in the SAP easy access menu.
Since I presume that you are using SRM 3.0 ,(from your previous threads) use BBP_PD where you can see all the list of POs for the business object BUS2201 or try to login as the purchaser in the SAPGUI and search for process purchase order.
Put /n go to the previous screen and then enter what ever tcode u want to enter. Or else
you will get an information like this :
Transaction BBP_POC cannot be called in the Easy
Access Menu; see long text
Once you are able to see the PO in SRM 3.0, kindly let me know how did you acheive if the above details doesnt help.
Best regards,
Sridhar
Do reward points for useful answers.

Tcode to see Dunning Block for a Billing Docuement

I need to see Dunning block for a Billing docunent, what is the tcode to see the Dunning Blosck user for a billing document.

Hi,
Go to FBL5N look for the FI invoice, open the invoice and see the dunning block field is populated. You can unblock it by changing the document to change mode from the main menu bar.
Thanks,
JD

Please watch and see if you can tell me how to correct the aspect ratio

http://www.youtube.com/watch?v=shiFprOnbK4
This is an unfinished std. def video hence this issue I ran into which is just a fun video for my youth group kids I teach at my church. I am editing it in final cut pro 7 and if you see at about 35 seconds the aspect ratio changes whatever its doing with the picture there.
I have never ran into this problem before so I don't know if its something I may have selected on the camera accidentally or done wrong in FCP but I shot all the video the same day of course for this event of ours and all the other video is fine an in 16:9 or what was called the "letterbox" option on my Panasonic DVX100B.
Please help me correct it if you know how. Thank you very much in advance.

I can't watch the video as well. Not quite sure what trouble your having
Aspect ratios can be tricky and there are a few spots you can mess them up. First I would check to make sure that your sequence settings are the same aspect ratio as your original footage. I would also make sure your exporting with the correct aspect ratio as well. (If you’re using the quicktime conversion option. Sometimes depending on your settings options like 16:9 are not turned on by default and you need to check them before exporting.)
Also if you can change the aspect ratio in FCP regardless of your sequence's aspect ratio is. Under your distort tab there is a aspect ratio option. +33 will make your footage 4:3 and -33 will make your footage anamorphic. However this will only stretch your footage. This method is only useful for when you can to place 4:3 footage into a 16:9 sequence without it appearing distorted and stretched

Want to see constant value of CPU not the aggregated one from the cube?

Hi All,
When I see my layout with fiscyear ,it shows the aggregated values for Quantity,Cost Per Unit,0Amount,which is distributed across period.
For example if one WBS and one uear(2008) -0Quantity(12),CPU(100) to four periods of one fiscyear.The distribution would be as shown below:-
Period       0Quantity      CPU            0Amount
003.2008         3               100              300
004.2008         3               100              300
005.2008         3               100              300
0006.2008       3               100              300
Total               12               400            1200
So in my layout I'll be able to see :-
fiscyear        0Quantity           CPU         0Amount.
2008                12                  400            1200
So 12 * 400 <> 1200 which is logically incorrect.
Is there any way by which we can get the constant or average value of CPU from the cube???
Any help would be appreciated.
Rgds,
Indu

Hi Indu,
If you are using Query designer for generating report, you can have this property...In the properties of CPU>Calculate result as...>Average value...
This will give you the result as average of all the values.
Assign points if this helps u...
Regards,
KK.

Where I can see the controlling documents- tcode please?

Hi all,
All financial documents can be seen at FB01. In the same way where I can see the cotnrolling documents. Please provide TCODE if any?
Thanks in advance!
Regards,
Satish

hi,
you can try: KSB5
hope this helps
ec

When we are able to see the data in Tcode RSA3(Source system)

Hi,
Please help me!
In enhancement after doing the R/3 stuff, when we are able to see the data in Tcode RSA3 in R/3 only?
Give the detail for all types of data source and for all types of loads.
eg: Std data source for deltaload, Generic data source for full load.....etc...
Regards,
Shiva.

Sure...
I am doing enhancement for datasource '2LIS_05_QVUDN'.
I complited the R/3 stuff and check the data for enhanced fields in RSA3...it's giving run timeout run time error.
Then I just ignore that error and I complited BW stuff successfully....after compliting BW stuff I am able to see the data in RSA3 in R/3.
So my question is, What is the root cause for this....?
When we are able to see the data in RSA3 in source system.?
please give me details for all types of datasource and all types of loads so that it will helps a lot for me in future.

What is the tcode to see all the workitems with out agents?

Hi Gurus,
What is the tcode to see all the workitems with out agents?
Thanks in advancec

SWI2_ADM1
Thanks
Arghadip
Edited by: Arghadip Kar on Feb 21, 2008 5:45 AM

What is the Tcode to see all the Tcodes

HI
What is the Tcode to see all the Tcodes

Hi Raj,
As you want to see the list of T Codes, you can get the same by following ways:
SE16 ==> Table TSTC ==> execute and you will get the list of the T codes.
SE93 ==> Give any T code initial which u want to see for ex V* and display this will list all the T codes starting from V.
Hope this will resolve the issue.
Do Reward if useful.
Regards,
Abhi

Report exection problem for one user - not able to see the data.

Hello Friends ,
Need some help . I have got the one ticket from bussniess side about the report execution .
Unfortunately , I am also not having authorisation of that report due to sensible data.
Problem - User is executing the report but some how he is not ABLE TO see the data for one company code Hierachy .
I executed the same report through RSSMQ via his user id , and I got the below message.
All value were selected . Hierachy Authorisation cannot be used.
A displayed hierachy requier a hierachy authorisation .
But when i checked his authorisation , I am able to see that he should have authorisation to all the hireachy .
could you please let me know , how can I check more ?
Regards,

after accessing the report , u go to su53 tcode and check the authorization and u can see what is problem in authorization for the that user and u can send the details to secuity team to rectify the issue ,

Link on a pivot table to see the data behind summary figures

Hello,
I need your support because I am not sure if what I need to do is possible.
I have a flattened table and I have created several pivot tables and slicers based on it. Once I have created the scenario I want to analyze (using slicers), I get some summarized figures in the pivot table. What I need is a way to put a link on those figures
to allow me to see the data associated to them.
For instance, if after applying some slicer I get one figure 3, another 2 and grand total 5, I need to see the 2, 3 or 5 records behind them filtered in the existing data (not just double-click and create a new worksheet) .
Thanks in advance for your comments,
Parseval

Hyperlinks in pivots are not supported.
There is some limited drill through functionality built into pivots, but you can't do a lot to configure how it behaves.
If it is enabled, which I believe it is by default, you show be able to double click on a aggregated total and a new sheet will pop up with the underlying records. If your measure is a relatively simple aggregation and the underlying data is a
flat file then this should work pretty well. The results can be unexepected if the measures are complex or there are a lot of underlying relationships in the model.
The other possibility is to use the pivots ability to collapse/expand fields. If you can put the row ID for the individual records into the rows of your pivot beneath what ever aggregated row you are currently displaying, then you should be able to expand
into the rows and see the lower levels of the "hierarchy". By default, all rows in you pivot would be collapsed, but then a user could click the little plus sign next to the row label and expand it to see the underlying records.

Tcode to see the aggregation ratio

Similar Messages

Maybe you are looking for