Regarding the problem of cooloing fan and warranty period

When i power on my HP pavilion dv6 6051ea laptop it shows "cooling fan is not working correctly" and says press enter to continue but it cause to damage your data......... . According to my knowledge, i think it should be replace. I purchased lap top from UK with two year international warranty but now i am in Sri Lanka, when i check for warranty form HP it shows 2012-09-11 as warranty expiration date but i purchased this on 2011-06-14. I would like to know, is it possible to replace cooling fan in Sri Lanka under warranty. Please help me to solve the problem.

If you purchased an Care Pack, or exented warranty, from HP then the warranty will need to be registered to that specific notebook for the warranty system to reflect that change. Even if it is not registered to it properly in the system, they have ways of getting that completed.
I am in the U.S. and do not have experience with international warranties overseas.
Here is the support contact page I found on HP's Sri Lanka site. I would contact them first since they should be local to your location.
Here is the support contact page if ound on HP's UK site. I would contact them as a last option since there would be several phone charges to talk to them.
If you prefer to contact HP's UK support by e-mail, this link should get that process started to get support without paying for phone charges.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

Hello apple I have the problem with my iPhone and my friends have this problem too. My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it bu

Hello apple
I have the problem with my iPhone and my friends have this problem too.
My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it but when answer both of us can't hear anything and when I put my iPhone to my face the screen is still on and when I quit the phone application and open it again it will automatic call my recent call. And when my friends call me my iPhone didn't show anything even the missed call I'm only know that I missed the call from messages from carrier. Please check these problem I restored my iPhone for 4 time now in this week. I lived in Hatyai, Songkhla,Thailand and many people in my city have this problem.
Who have this problem??

Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$

How you can solve a problem or find out on a dead pc if the problem relies on motherboard and not on processor or vice versa

hi.
I am working myself with computers , so there is one thing in my mind I wanted to be sure,which I couldn't find an answer for it!
because I had before totally black screen and the problem was damaged processor.
I am wondering how I can be sure as the last option when I get a black screen and there is no lihgts at all no any LED is lighting.totally dead pc.
how you can be sure then that the problem relies on processor and not on motherboard or vice versa the problem relies on motherboard and not on processor
because I can't say to the customer lets buy first a processor if it is the cause of dead PC and if not then we buy motherboard. this sounds not wise.
so I experimented first with my latop ,I pulled out the processor to see if I can see any LED light or any movement on the motherboard to be sure that motherboard giving me some clue that it is healty. I gave some light heat to de fan to let it turn ,because
it is working with heat sensors then I know that the motherboard is healty. but it didn't work.
I did the same with my desktop computer and the result is the same no any lights and no any movement on the motherboard . so now can some one tell me how you can distuingish as a last result which of this 2 components is causing dead PC. is there any
tool to test the motherboard or how asus,dell ect. they solve such a problem if the customer send to them a dead pc.
I know that the power supply also can cause dead pc but I know how to solve a problem with dead power supply. and I want to keep away power supply from this question. please do not tell me that Idon't have to pull out processor
because I am a technician and both of my computers are doing very good after this experiment.
thanks
johan
h.david

Usually if you have some kind of hardware failure there is some beeping during POST or most motherboards now have LED indicators to produce and error message based on the type of failure
So if its bad memory, not place properly, mismatched, processor not inserted properly, mismatched voltage or voltage connector not present etc it beeps or generates the error id.
Power supplies can be tested for failure. There are some walk throughs for testing just them with a switch, paperclip or a jumper (I'd suggest not doing this if you are not familiar with the dangers of electricity).
Memory can be tested with memory diagnostics programs like Memtest+
Processors can overheat if the proper precautions have not been taken usually you will get a POST beep or error code for that.
If the motherboard has no response then do the basics first:
Check power connectors and power supply. Once you determine that is not the case move on to other items like graphics cards in all the way or memory.

When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and th

When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but do not see any video. Have I changed some setting that controls video playback in the monitor window?

Randy Ruttger
Thanks for the follow up.
Missing in this equation were the version of Premiere Elements that you were using and the computer operating system on which it was running. But...
The deed is done. But.....Until now and after you went ahead and moved to version 12, we now learn what version of Premiere Elements you were using. We still do not know the computer operating system involved.
You just said Premiere Elements 10. Premiere Elements 10 is hit by a serious known display issue if the computer uses a NVIDIA GeForce video card/graphics card. In this issue, the only remedy is to roll back the driver version to about May 2013. The description of the problem and how to do the roll back are described in one of the Announcements at the top of this forum. What video card/graphics card does your computer use?
On another front, Adobe will be releasing a new version of Premiere Elements any day now. No one but Adobe knows the feature set for the new version. That type of information is announced at the moment of release of the new version.
So the remedy to the problem that you presented in this thread could have been...
1. Rolling back the NVIDIA GeForce driver version to about May 2013 if possible (Windows 8 or 8.1 64 bit, may not be possible)
2. Move to another version of Premiere Elements (which you did)
I offer the above for consideration so that you can review your decisions. We are pleased to learn that Premiere Elements 12/12.1 works for you.
Please do not hesitate to ask questions and ask for clarifications, but remember that the answers are in the details.
Best wishes,
ATR

When I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?

when I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?

Hi
And without info - it's near to impossibly to help. Try my general troubleshooting note:
Troubleshooting note
When iMovie doesn't work as intended this can be due to a lot of reasons
iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
problem in iMovie Cache folder - trash Cache.mov and Cache.plist
Creating a new User-Account and log into this
This forces iMovie to create all pref. and cache files new and error free
Event or Project got corrupted - try to make a copy and repair
a Codec is used that doesn't work (even though iMovie and/or iDVD tries to / they fail in the end)
version miss match of QuickTime Player / iMovie / iDVD
preferences are wrong - Repair Preferences
other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
USB-flash-memories - usually do not work
Net-work connected hard disks - usually do not work (most often not fast enough and WRONGLY FORMATTES as DOS etc)
iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie. When iMovie starts-up it first look trough this iPhoto library and if faulty it all Halt’s.
This You do by
First - close iPhoto
Secondly - on start up of iPhoto - Keep {cmd and alt-keys down}
Thirdly - now select all five options presented
THEN - WAIT a long long time (>20 hours are not strange)
free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
Screen must be set to million-colors
Third-party plug-ins doesn't work OK
Run "Cache Out X", clear out all caches and restarts the Mac
Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
(I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
buenrodri wrote
I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
Last resort: Trash all of iMovie and re-install it
Yours Bengt W

Why is Apple so bad at providing customers with information on what the problem with email is and what they are doing to fix it?

Why is apple not providing information on what the problem withe email is and what they are doing to fix, along with a time frame for fixing the problem.

It was because the problem was major. If you do not know tech, you should know that a two day outage usually indicates some type of virus, hack, or a bad software load that they had to unravel. The common way to solve that is to rebuild servers and put back into service. That takes time.
Apple did not want to admit this problem. My guess at this stange was that they loaded new software that might be associated with the new IOS and it crashed. To reveal this would be to cast into doubt their future revenue.
Either way. Run do not walk away from Icloud products and services. Apple has demonstrated they can not be a business partner.

Computer iMac7,1 has been giving sundry problems for some time. Within the last six weeks I have reinstalled the OS (Snow Leopard), without affecting the overall contents of the hard drive. ±3 weeks later the problems became more serious and I again reins

Computer iMac7,1 has been giving sundry problems for sometime. Within the last six weeks I have reinstalled the OS (Snow Leopard),without affecting the overall contents of the hard drive.
±3 weeks later the problems became more serious and I againreinstalled the OS and installed OS 6.6.7 from the internet.
I used the option to restore from the external backup driveand went back some time as it was my intention to reinstall individualcomponent in an attempt to find out where the problem might lie. This hasintroduced an entirely new problem! If I open Time Machine from the desktop itappears that all backups from late 2009 to June 2011 are intact. But, in thiscase there are none of the restore functions &c on screen. The latter areonly shown if Time Machine is opened from the menu bar or from the dock but, inthis case, available are only backups in late 2009!
I also opened the Apple Hardware Test in an attempt toestablish the nature of the problem. The ‘quick’ version said there’s nothingwrong; the more detailed one reported “Error detected, 4HD/11/40000004.” I haveagain tried to employ this test but nothing I do can induce it to open!!!
What to do? I need help urgently and would appreciate anyadvice that offers solutions to the problem.

To check your S.M.A.R.T status open disk utility and click on your drive and then click on the info icon.

What is the problem in my account I could not download from the store, whether programs are free or non-free I hope you fix the problem or Chrho me and I repaired the problem

What is the problem in my account I could not download from the store, whether programs are free or non-free I hope you fix the problem or Chrho me and I repaired the problem
thank you...

Nobody here can fix your problem, we do not work for Apple. And I have no idea what "Chrho" means. Neither does Google.
So - exactly what happens when you try to download a program? And from where are you trying to download it?

Query regarding the Node manager configuration(WLS and OAM Managed server)

Query regarding the Node manager configuration(WLS and OAM Managed server):
1) In the nodemanager.properties I have added the ListenAddress:myMachineName and ListenPort: 5556
My setup : One physical Linux machine(myMachineName) has : WLS admin server, managed server(OAM 11G) and nodemanager.No clustered environment.
2) nodemanager.log has the following exception when I start the oam_server1 using EM(Enterprise Manager11g):
Mar 23 2012 1:39:55 AM> <SEVERE> <Fatal error in node manager server>
java.net.BindException: Address already in use
at java.net.PlainSocketImpl.socketBind(Native Method)
at java.net.AbstractPlainSocketImpl.bind(AbstractPlainSocketImpl.java:336)
at java.net.ServerSocket.bind(ServerSocket.java:336)
at javax.net.ssl.impl.SSLServerSocketImpl.bind(Unknown Source)
at java.net.ServerSocket.<init>(ServerSocket.java:202)
at javax.net.ssl.SSLServerSocket.<init>(SSLServerSocket.java:125)
at javax.net.ssl.impl.SSLServerSocketImpl.<init>(Unknown Source)
at javax.net.ssl.impl.SSLServerSocketFactoryImpl.createServerSocket(Unknown Source)
Default port on which node manager listen for requests is localhost:5556.I have changed it to point to my machine. The port should be of WLS admin server or it should be the managed server port?
3) I have started the NodeManager using the startNodeManager.sh script.
4) The admin server port is 7001 and the oam managed server port is 14100.
Any inputs on what might be wrong in the setup will be helpful.Thanks !

By using netstat -anp|grep 5556 you can check which process on your machine is using the 5556 port.

The problem about integrate Portal and R/3

Hi everyone :
   We want to achieve that our vendor can query R/3 report via our Portal. I had done SSO configuration.
   But we had about 500 vendors, it is impossible that we create 500 R/3 users for our vendors, because the cost is too much .
   And there is another problem, vendor who had the authorization to query report can query the other vendor's data at same time. But we expect that certain vendor can query his data only.
   I think this is a general problem when integrate Portal and R/3, BW .
   Is there somebody had solved this problem or give any advice?
   Any discuss is welcome.
Best Regards,
Jianguo Chen

Hi,
I would say: get in contact with your SAP account manager anc check which options SAP can offer you...
Normally every user using a R/3 system has to have a valid user license in that system. Expecially when you want to access control to data on user (vendor) level you nedd to identifiy the user clearly and uniquely which by standard means you need a user for every vendor.
Hth,
Michael

The problem about integrate Portal and R/3 : vendor query report problem

Hi everyone :
   We want to achieve that our vendor can query R/3 report via our Portal. I had done SSO configuration.
   But we had about 500 vendors, it is impossible that we create 500 R/3 users for our vendors, because the cost is too much .
   And there is another problem, vendor who had the authorization to query report can query the other vendor's data at same time. But we expect that certain vendor can query his data only.
   I think this is a general problem when integrate Portal and R/3, BW .
   Is there somebody had solved this problem or give any advice?
   Any discuss is welcome.
Best Regards,
Jianguo Chen

Hi,
I would say: get in contact with your SAP account manager anc check which options SAP can offer you...
Normally every user using a R/3 system has to have a valid user license in that system. Expecially when you want to access control to data on user (vendor) level you nedd to identifiy the user clearly and uniquely which by standard means you need a user for every vendor.
Hth,
Michael

Ive just purchased Adobe Acrobat Pro and when i pdf a Revit file all text is unreadable. If i do it on a free pdf as Cube i dont have the problem. Whats happening and have i wasted my money

ive just purchased Adobe Acrobat Pro and when i pdf a Revit file all text is unreadable. If i do it on a free pdf as Cube i dont have the problem.

Hi michaele,
What is the extension of the revit file you converted to pdf?
Regards,
Rave

I had itunes installed on my pc. I received notice to update. I started update but gpt the following message - this application failed to start because MSVCR80.dll was not found. Reinstalling may fix the problem. I uninstalled and have tried to reinstall

I already had itunes installed on my pc. I received an update and tried to install it. I got a message
This application failed to start because MSVCR80.dll was not found. Reinstalling may fix the problem.
I uninstalled itunes and tried to reinstall. itunes says it has installed but when I try to open itunes I get the same message.
How do I repair/sort out this error/fault
Thanks
David

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Invalid security certificate for my website host-they say the problem is Apple Safari and use Firefox instead

For the past few days, I keep getting an invalid security certificate in Safari whenever I select Edit My Site from my website homepage (http://annaporterartist.com), or whenever I select anything requiring a secure log in from my website host main page (FASO.com). I have contacted technical support at my website host (fineartstudioonline.com) and they say that this has been an intermittently recurring problem in Safari for years and they recommend that I use Firefox instead. As proof of this they emailed a link to an Apple Support discussion, but it was for Mac OS X Lion v 10.7.4 and Safari 5.1, even though I told them I am using Mac OS X Mountain Lion v 10.8.2 and Safari 6.0.2. I do not get this error message anywhere else on the web using Safari. I did try Firefox and it seems to work fine, but I prefer Safari and I want to know why Safari is not working as it should be. I am concerned that there is a real security problem with my website host and I need someone to explain why I am getting this error message, what it means, and if it is, in fact, a known problem with Safari or is my website host corrupted? Really tired of technical support playing pass the buck or pretending the problem does not exist.
The specific error message is:
Their response to my inquiry and my reply is shown below:

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
From the menu bar, select
Keychain Access ▹ Preferences ▹ Certificates
There are three menus in the window. What is selected in each of them?

I forgot my apple id password so i create a new one. the problem is i cant remove my first apple id because any time i tried to reset my password i never received any email from Apple.now the problem is my iCloud and ... have problem on my iPhone????

I have a problem with my I phone5 . after i bought an iPhone6 and i joined it to my iTunes , the same problem happens to my new Iphone.
i thought with the new Apple ID the problem could be solved. so i create a new Apple ID. now i have 2 I Phones with the same problem means i can't remove my first Apple ID because any time i try to reset my password and delete the Apple ID i don't receive any Email from APPLE .
Please HELP me. i would be very appreciated .
thank you very much.

Hello ba.t,
After reviewing your post, it sounds like you tried to reset the Apple ID password but did not receive the email. I would recommend that you read this article, it may be able to help the issue.
If you didn't receive your verification or reset email - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Regarding the problem of cooloing fan and warranty period

Similar Messages

Maybe you are looking for