Regarding Video Capture Utility with Monitoring

Hi everyone,
I downloaded the "Video Capture Utility with Monitoring" example. i want to make a few changes to it.
Along with recording the video i want to capture images as well(from the video stream itself) at regular intervals of say 6 seconds.
This is where i found the Recording Video Utility example.
http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/JVidCap.htmlThis example uses a Processor, i tried to create a player object from media locator and then grab frames but it didnt work out.
Can anyone help? I am new to JMF.
Edited by: ashish.kumar.shah on Mar 28, 2009 10:06 PM

ashish.kumar.shah wrote:
Can anyone help? I am new to JMF.TBM and I developed some code a while back that does this...
[http://forums.sun.com/thread.jspa?messageID=10596692#10596692]

Similar Messages

USB 2.0 Video Capture Adapter with Audio

Hi
Can any one help, I would like to watch my security cameras on my G5 but I think I need a way of getting the pictures in, will a USB 2.0 Video Capture Adapter with Audio - that states Capture and Edit High Quality Video and Audio without Sound Card. I also have two programs called securityspy and camspinner-101. that I am told will work on a Mac?
Thanks
George

George Hilton-
Just out of curiosity how did you solve your issue?
-DaddyPaycheck

Problem with video capture device, with a virtual camera

I try to use Adobe Flash Media Live Encoder 3 with a virtual camera(DirectShow Filter) but met such a problem:
"Error connecting input preview RGB filter."
"Failed with error 80004005:SetupInputVideoPreview(pFilter, pguidCategory)"
"Failed with error ffffff97:SetupVideoPreview(pFilterSource)"
"Problem with video capture device. Please verify that the video capture device is working correctly and is not already in use."
However, it is good to use AMCap,
what's the problem with FMLE.
Looking forward to your replies. Thx!

Did you ever figure out the problem/solution?
I am experiencing the same thing with my virtual camera filter when connecting to FME?
Shawn

Video capture Cables with MSI StarForce 822 GeForce 3!

I have the VT64D and I woiuld very much like to know where to find the cables for this card, I need the A/V Cables... as I would like to have the full benefit of sound as well...
If anybody has this calbe/breakout box I would be Extremely interested in purchasing it...
Thanks,
Marc
PS: Its the second revision of Starforce 8822

If you have the Video Capture Driver installed then the video capture program should see it. On MSI site version 1.16 of the driver is available for download.
If you still have problems (e.g. too many frames lost) you can try using Virtual VCR (worked best in my case).

How to use video capture function with Ti4200-VTD8X card?

I have installed nVIDIA Capture Driver provided by MSI (come with VGA card), but don't know how to use this function, do I need to run a third party program or simething else? I couldn't find any document or information in MSI site talking about this function: "Capture the image through the video input port on the card". Please help, Thanks in advance.

Try Ulead Video Studio or check your card's bundled software.Intervideo WinProducer anywhere?
Check your card's manual for proper connections :D

Picture / Video capturing problem with Nokia 5233

Hi All,
I am facing a problem when I capture a picture/video with my new Nokia 5233 phone I bought yesterday.
1. When I try to capture a video, nothing is visible on the phone screen. I click on Record button and the shooting starts and then I click on it again and it stops. But I when it tries save the video it gives an error "Unexpected error occurred. Please restart your phone".
2. I reboot the phone. But I face the same problem. I face the same problem while capturing pictures.
I have tried following as a measure to solve the problem but no success till now:
1. Reboot the phone: tried it more than 20 times. Does not work
2. Soft Restart: Removed the battery for 1 minute and powered the phone back. Does not work
3. Restore Factory Settings: Restored the phone to factory settings. Does not work.
4. I checked my firmware version. Its 12.1.089, RM-625. I think no firmware upgrade is available at present
Please advise what steps should I follow to cure the problem.
Please also let me know in case you are facing a similar problem with your device.
Thanks a lot in advance.
Solved!
Go to Solution.

Went to Nokia care. They took 10 days... but could not correct the problem...
Then again left it there for 7-8 days... finally got my phone replaced...

Does Adobe Elements 13 video capture work with Firewire for DV videotapes?

I just spent $120 to upgrade to Premiere Elements 13, and it doesn't recognize my Sony DV tape recorder/player. I was searching on the web and thought I saw somewhere that Premiere Elements 13 dropped firewire support, but I can't relocate the information. So now I've spent the money on the upgrade and can't capture video.

davide0901
DV and HDV data capture firewire has been removed from Premiere Elements 13/13.1. The last version to have this feature is 12/12.1.
Adobe has suggested the workarounds for the Premiere Elements 13/13.1 situation. Please see
Removed features and unsupported file formats | Adobe Premiere Elements 13
There are the usual capture programs
Windows
Movie Maker
HDV Split
Mac
iMovie
Please let us know if you need more information on this matter.
Thank you.
ATR

JMF and video capture card?

i wanna ask how can i usea video capture card with the jmf and record video
i try to detect my capture card but the jmf didnt detecte it please pleas help me

hi,
i use a tv-card with my camera through linking them with a composite cable. Also, my tv card has capturing capability and i use JMF to do a capture program with these tools and the result is good for me. The monitor.zip file wihich contains a sample of capturing and monitoring simultaneously exists on sun.com. I use it and it was very helpfull for me.
JMF detects cards through its 'CaptureDeviceManager' which is a controller type object. If you specify like Vector devices = CaptureDeviceManager.getDeviceList(null) -> You will be get the list of appropriate devices on your pc.
Regards,
Erohan

Video Output to NTSC monitor

I recently got new furniture, so of course, I unhooked everything and moved it around, and now, for some reason, I can't see video on my NTSC monitor. I know everything is hooked up correctly because I can log and capture and see video on the monitor; the video captures correctly with audio and everything. But when watching video in the timeline, there's nothing happening on the monitor. Any suggestions? Has this happened to anyone else?
I have switched out firewire cables, rebooted the computer, etc. I'm so confused!

#8 External Monitor Viewing.
Shane's Stock Answer #8:
A simple path is mac > firewire > camera or deck > rca cables > tv
Then start up your camera and tv, then open fcp.
Then go View > External video > all frames
Video playback should be Apple firewire NTSC (If you are using an NTSC set)
Audio playback should be Audio follows Video
Techinially, this should send synched video to your TV
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section
Shane

Premiere Pro CS3 Capture Problem with Audio

Setup:
Premiere Pro 3.2.0
Video Capture Device: Blackmagic Design Intensity Pro capture card
Audio Capture Device: HT Omega Claro Plus XP
OS: Windows 7 Ultimate 64-Bit
I am able to capture video with Premiere with no issues. However, the audio does not get captured even though it is set to capture both audio and video. I am configured for ASIO capture and playback. Strange thing is that I can load Adobe Soundbooth and it will capture the audio just fine (from the same input stream as I'm trying to do with Premiere). What gives? I'm almost out of options.
From what I can see, when I hit F5 and go into capture mode, Premiere seems to insist that it must capture audio from the blackmagic design audio ports, and even though I have the audio explicitly setup for the Claro in audio hardware, if I go into the capture settings, it still is set on "Blackmagic Capture" as the capture format, and when I go to settings, I can pick the audio channels to capture, however.... I don't want to capture with the blackmagic for audio. The capture format MUST be "Blackmagic Capture" or else I can't capture the video. It still doesn't make sense though, since I have the audio hardware set for input from the claro ASIO. It shouldn't force Blackmagic audio.
Any ideas? Please help

Some additional information:
Sound card is a Claro Plus XT not XP. Used to typing XP heh
Also, the video capture works with the included blackmagic capture software, as well as freeware solutions like VirtualDub and a Japanese freeware program I use. I'm able to capture video and audio without issue on those. Just don't know why Premiere doesn't do it...

Hauppauge ImpactVCB Video Capture Board - Anyone use it?

Has anyone used Hauppauge ImpactVCB Video Capture Board with Flash Media Live encoder and have success?

George. You probably don't have many options with the Epix board. However, if your Epix software enables you to save files to disk, then you can open them from LabVIEW and process them with Vision or Vision Builder.
Another option is to contact Graftek (www.graftek.com) or ImageMill (www.imagemill-tech.com). They have created drivers for third party image acquisition boards in the past and they may have one for your Epix board.
A third option, of course, is to upgrade your Epix board to an NI IMAQ board. Your sales contact within NI may even be able to give you a discount on the trade in, but I can't guarantee it.
Good luck!
Kyle V

Can't get driver to work with ezcap usb 2.0 video capture device on windows 8.1

I have an ezcap video capture device that works fine on my windows 7 machine but will not work in windows 8.1. The software (arcsoft 3.5) functions properly but will not let me select the video grabber as a source. The driver itself indicates not compatible with 8.1 and the there are no drivers out there that I can find to address this issue? Any known solution would be helpful.

Hi,
It is not from HP. Please try driver from the following link:
http://www.ezcap.tv/ezcap116-drivers?zenid=r53fvgj1n510tdme9itqc9ql52
(After the first screen shot).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Video Capture with FX 5900 XT VTD

Hope this is not redundant. I sent a message to GlennVideo but I don't think it went through. Trying to find my way around the forum and to post this message. So here goes.
I recently purchased the FX 5900 XT VTD 128 card and installed it on my new computer (Pentium4 2.8). The video display on my monitor is exceptional but there is no video capture. I have read through the basics, installed the capture drivers from the CD that came in the package (nv4_disp version 6.14.10.5303) but after connecting the RCA banana video and audio plugs to the 4 in 1 connector that came with the unit and turning the VCR on nothing happens. I did complete a "customer problem description form" from the MSI web site and sent it along but there has been no response thus far. I did not receive an automated response indicating the message had been received by them. So I will resend and turn to the forum as well for help. I have 512 of 2700 memory on this computer plus an MSI motherboard, 865PE New2-P. Appreciate any suggestions. Thanks.
LJ Brown

Well that's the rub, a manual did not come with my package. I downloaded the manual from the web site and the package contents shown their does include a manual. The only written material was a small brochure on installing hardware and software. And the online manual is essentially the same; no help in how to use the capture program. Yes 5 discs came in the box but seemed to be games, "Morrowind, Duke Nukem, Ghost Recon",etc. And in that group is the WinDVD Creator; but I didn't appreciate what it was because of being grouped with the games until you responded to my note on the forum site. Anyway I installed the program. It doesn't seem to recognize my VCR connection. When I activate the capture button the a picture of a TV screen comes up with the words "nVidia WDM Video Capture (...." next to it. And when my VCR that is properly connected is turned on nothing happens. If I hit the burn button a timer is started but I see nothing. I was anticipating that if the program was recording from th VCR I should be able to monitor what is coming across on the large black TV monitor on the left half of the screen? No substantive advice in the help section either. So I'm still struggling and hopeful you or someone on the forum can guide me further. Essentially all of the descriptions in the creator help section address digital material but always indicating that VCR material (analog) can be captured as well.
L J Brown

Anyone using Elgato Video Capture with good results?

I've got some VHS tapes that I want to edit in iMovie '11 (and/or FCE).
Viewed on a TV monitor, the image quality of the tapes varies from acceptable to very good - but I am very disappointed with the quality of the video once imported, using Elgato Video Capture, to my MBP. It is very indistinct and washed out. Only the audio remains as clear as the original.
Anyone had any success with using Video Capture to convert old tapes?
Any advice and/or feedback would be much appreciated!

conran wrote:
Thanks Coolmax - I tried that, but no discernible improvement unfortunately.
These are the tech specs from the Elgato site:
Video resolution: 640×480 (4:3) or 640×360 (16:9)
Video format: H.264 at 1.4 MBit/sec or MPEG-4 at 2.4 MBit/sec
Audio: AAC, 48kHZ, 128 kBit/sec
I've tried both H.264 and MPEG-4 without much success. The resulting footage is always extremely grainy and 'muddy'. Any other ideas?
If I understand this correctly, Elgato can save your footage either in H.264 or MPEG-4 and you tried both. If the original file plays with ok quality and the resulting footage after being finalized by iMovie 11 look worse, I think we need to determine what are you finalizing to?
In "Export to Quicktime", you can choose the compressor to "none". Do this with a short clip as the resulting file will be big. Play back this video.
If there is a degradation in video, then you know it is iMovie 11 process that is causing it. From here on, you can further compress the video using Handbrake and adjust the settings to give best quality vs size.
There are software available on the PC side that can enhance and resize an already weak VHS captured footage and make it look better before you import it into iMovie 11. But this require quite a bit of computer horsepower to complete it in any acceptable time frame.

Problem with Video capture Device

i have a problem with FME. i am using Avermedia TV capture
device and Canon 3ccd Digital Video Camcorder ( PAL ) when i open
the FME interface the warning given for " Problem with Video
Capture Device".
i read all the topics in Flash Media Encoder Category, if
this problem occures my capture device ( i expect MPEG ) how to
solve this problem?
Thanks,

The Device Matrix is something we'll be updating in the
future as we continue to test more and more equipement. Ideally, I
would like for users such as yourselves to be able to add to it and
tell us what has worked for you as well. If anyone has any ideas
about what technology we should use to do this (e.g., this forum? a
wiki?) please let me know.
Regarding the devices not working - the main problem we see
is that the system requirements are not being met. Here is what to
check for:
- are you running on Windows XP (only supported OS right
now)?
- do you have DirectX client runtime version 9c or higher
installed?
- do you have hardware acceleration enabled?
- do you have 32bit graphics enabled?
- do you have the latest direct show drivers from the
card/device manufacturer?
Thanks,
Chris Hock
Adobe Systems Inc.

Regarding Video Capture Utility with Monitoring

Similar Messages

Maybe you are looking for