Problem with video capture device, with a virtual camera

I try to use Adobe Flash Media Live Encoder 3 with a virtual camera(DirectShow Filter) but met such a problem:
"Error connecting input preview RGB filter."
"Failed with error 80004005:SetupInputVideoPreview(pFilter, pguidCategory)"
"Failed with error ffffff97:SetupVideoPreview(pFilterSource)"
"Problem with video capture device. Please verify that the video capture device is working correctly and is not already in use."
However, it is good to use AMCap,
what's the problem with FMLE.
Looking forward to your replies. Thx!

Did you ever figure out the problem/solution?
I am experiencing the same thing with my virtual camera filter when connecting to FME?
Shawn

Similar Messages

Problem with Video capture Device

i have a problem with FME. i am using Avermedia TV capture
device and Canon 3ccd Digital Video Camcorder ( PAL ) when i open
the FME interface the warning given for " Problem with Video
Capture Device".
i read all the topics in Flash Media Encoder Category, if
this problem occures my capture device ( i expect MPEG ) how to
solve this problem?
Thanks,

The Device Matrix is something we'll be updating in the
future as we continue to test more and more equipement. Ideally, I
would like for users such as yourselves to be able to add to it and
tell us what has worked for you as well. If anyone has any ideas
about what technology we should use to do this (e.g., this forum? a
wiki?) please let me know.
Regarding the devices not working - the main problem we see
is that the system requirements are not being met. Here is what to
check for:
- are you running on Windows XP (only supported OS right
now)?
- do you have DirectX client runtime version 9c or higher
installed?
- do you have hardware acceleration enabled?
- do you have 32bit graphics enabled?
- do you have the latest direct show drivers from the
card/device manufacturer?
Thanks,
Chris Hock
Adobe Systems Inc.

FMLE 3.0.0.4743 Problem with video capture device

log:
Tue May 05 2009 14:26:54 : Selected video input device: Beholder A/V Capture (SAA7135) [Slot 2]
Tue May 05 2009 14:26:54 : Selected audio input device: Beholder Aud Capture (SAA7135)
Tue May 05 2009 14:26:55 : Problem with video capture device. Please verify that the video capture device is working correctly and is not already in use.
Tue May 05 2009 14:26:56 : Audio Device Error : The selected audio device "Beholder Aud Capture (SAA7135)" doesn't allow setting volume intensity. Disabling the volume slider control.
Flash Media Encoder 2.5 working without any errors

The second message that you are getting "The selected audio device "Beholder Aud Capture (SAA7135)" doesn't allow setting volume intensity. Disabling the volume slider control." is because your device does not let you change intensity of volume. This warning message is just to tell user that volume slider will remain disabled for the selecetd device. This is new addition in FMLE 3.0 and was not there in FMLE 2.5
Also for first message, please make sure that no other instance of FMLE is already running using this device. You can verify this from task manager. If any other instance of FMLE is running then please close that instance so that device gets free for new instance.

Can't get driver to work with ezcap usb 2.0 video capture device on windows 8.1

I have an ezcap video capture device that works fine on my windows 7 machine but will not work in windows 8.1. The software (arcsoft 3.5) functions properly but will not let me select the video grabber as a source. The driver itself indicates not compatible with 8.1 and the there are no drivers out there that I can find to address this issue? Any known solution would be helpful.

Hi,
It is not from HP. Please try driver from the following link:
http://www.ezcap.tv/ezcap116-drivers?zenid=r53fvgj1n510tdme9itqc9ql52
(After the first screen shot).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Adobe premiere elements 12 with diamond vc500 one touch video capture device.

Adobe premiere elements 12 and using Diamond vc500 one touch video capture device.
AVI files will not load into Adobe premiere elements 12.
I bought what I thought were the two best software and capture devices.
I am archiving old VHS tapes and using Diamond vc500 capture software called EZ grabber. I thought the best archiving format would be AVI files. As I just started this project. I am willing to do what is needed.
That even being, going and buy another capture device that being for a VCR to PC using a USB are even a Video card.
EZ grabber software ask you to record in what format. I picked AVI. There is DVD - SVCD - VCD - MPG4. I want to archive then go back and edit. The DVD or SVCD format, is that not the same as mpeg 2?
You and I know the drill. Saving in what long term archive format and that dare thing about video compression and losing quality of the videos. Its all a nightmare.
Once again I am willing to buy another capture device for a VCR that will work with Adobe premiere elements 12.
Help please with long term archiving format and capture device.
Thanks

The answer is B.
Capturing the VHS content to computer (via the Diamond vc500 and USB connection and EZ grabber) to obtain an .avi file on your computer and then trying to import that into Premiere Elements with its Add Media/Files and Folders?
When I do that, the Adobe premiere elements 12 crashes or only loads a 2 mins of video.
The firewire connection device "Canopus" product sounds great. But I really don't want to spend that much on my home videos. My PC does not have a Firewire connection. So add a new card for that and the Canopus product. I could just pay someone to do my VHS tapes.
Diamond vc500 $35
Adobe premiere elements 12 $65
Firewire card $50 plus
Canopus $180
$330 is way too much for simple home VHS videos

For all people with video capture problem

For all people who have trouble with video capture here is the Link

thnx rus,
I had no problems with ViVo, but this file is tiny.
No frills, just what it's meant to do..
:D :D :D
(will test thorough later on)

Virtual video capture device driver for screencapture available ?

Does anybody know a way to get screen capture in form of a virtual video capture device? I know there are drivers available for other OS (e.g. Windows), but is this possible with OS-X too ?
I want to use the screencapture not only in iChat, but in Flash based videoconferencing/streaming solutions as well, so the normal screen sharing would not work.
thanks for any help, Mark

Hi,
At one time this was Bundled on Some Macs
http://www.ambrosiasw.com/utilities/snapzprox/
It will let you capture a segment of your Screen with or without Audio
8:07 PM Sunday; March 9, 2008

USB 2.0 Video Capture Adapter with Audio

Hi
Can any one help, I would like to watch my security cameras on my G5 but I think I need a way of getting the pictures in, will a USB 2.0 Video Capture Adapter with Audio - that states Capture and Edit High Quality Video and Audio without Sound Card. I also have two programs called securityspy and camspinner-101. that I am told will work on a Mac?
Thanks
George

George Hilton-
Just out of curiosity how did you solve your issue?
-DaddyPaycheck

Regarding Video Capture Utility with Monitoring

Hi everyone,
I downloaded the "Video Capture Utility with Monitoring" example. i want to make a few changes to it.
Along with recording the video i want to capture images as well(from the video stream itself) at regular intervals of say 6 seconds.
This is where i found the Recording Video Utility example.
http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/JVidCap.htmlThis example uses a Processor, i tried to create a player object from media locator and then grab frames but it didnt work out.
Can anyone help? I am new to JMF.
Edited by: ashish.kumar.shah on Mar 28, 2009 10:06 PM

ashish.kumar.shah wrote:
Can anyone help? I am new to JMF.TBM and I developed some code a while back that does this...
[http://forums.sun.com/thread.jspa?messageID=10596692#10596692]

How to connect a video capture device to Satellite M30X 127

I'm going around in circles trying to find a video capture device that will function with a laptop and would be grateful for advice. By way of example, I'm now looking at the 'Canopus ADVC-110', although still looking around (but not Pinnacle, who seem to have a terrible reputation for capture items).
Problems include:
1. Main problem is - many video capture external devices require a 'line-in' to PC for good quality audio transfer. This laptop doesn't have a line in, only the mike and headphone jacks. In addition, I've also tried a few RCA pins in the 3.5mm microphone/headphones jack and they were too small. How to solve the problem of getting audio from vcr to my PC?
2. The ADVC-110 connects to the PC via Firewire (and S-video), but is a SIX-pin type. M30X is a FOUR-pin type. Are there adapters available?
3. Some capture programmes seem to require huge capacity of RAM. Is a laptop going to be suitable to do the job? (I simply want to capture old vhs tapes from vcr to PC, then burn to DVD with Nero 7 or similar).
Thanks in advance!

Hello
You are right! You must use external device for signal transfer to your notebook. I dont know where you have this info but I have good experiences with Pinnacle product. For data transfer I have used USB port.
'Canopus ADVC-110 is not known to me but I dont see any reason why this should not work well. Use delivered software for video capturing and there should not be any problem.
Only thing is that after recording the whole video material must be prepared for burning and unit need a lot of power to do this well und fast. When you buy this and want to use on right way I recommend you to expand RAM to 1GB.
Compatible memory modules for your Satellite M30x are:
PC2700 512MB (PA3312U-1M51)
PC2700 1024MB (PA3313U-1M1G)
Bye

After using video capture device to copy VHS to DVD, burnt DVD will play on computer but not

After using video capture device to copy VHS to DVD, burnt DVD will play on computer but not on DVD player. Tech support for the VCD said my HP DVD burning software has to burn "DVD Video and not DVD data" and to check with HP. How can i check myself.

Grahamster, welcome to the forum.
I recommend trying CDBurnerXP for burning video CD's. I have been using it for years without a glitch. I use it mainly for burning ISO's, but have used it for all types. Please let us know if it works or not.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Why i can not open Video Capture Device Settings in Adobe Flash Media Live Encoder?

Hi! I've got a problem with Adobe Flash Media Live Encoder 3.2. Why i can not open Video Capture Device Settings? I'm clicking this button, but it doesn't appear, there is just a blinking of the camera's window. Please help me, i'm looking like a shining red pig! Need to change the light or contrast.

"The audio preview in FMLE indicates there IS audio being input"
How do you know this?
are you "Saving to file"? how is the audio in the saved file?
Adninjastrator

No video capture devices were found

I recently discovered that the iSight camera (now named FaceTime HD camera?) does not work on my recently acquired MacBook Pro Retina 15".
I have attempted to reset the SMC, but that did not appear to solve the problem.
Under "System Information" > Camera it simply states "No video capture devices were found".
It also does not appear under USB as some other threads have suggested.
When I start Photo Booth or FaceTime the camera icon with a line across is displayed, and Photo Booth also states "There is no connected camera".
I am currently running OS X 10.8.5 (12F45).
As far as I can tell the problem has been there since I first received the machine back in June, I simply have not had any reason to use the camera until now.
Have anyone else run into a similar problem, or is there perhaps somewhere I could look at log files or system files or something like that to attempt to track down the cause of the problem?

ken_guru wrote: ... is there perhaps somewhere I could look at log files or system files or something like that to attempt to track down the cause of the problem?
It sounds like you already have done everything you need to do.
Because your camera is not being recognized by your "recently acquired MacBook Pro", contact Apple or the retailer who sold it to you for help. They can tell you if your Mac needs to be repaired or exchanged for one that works properly. Otherwise, they can show you how to use the camera.
Message was edited by: EZ Jim
Mac OSX 10.9

Opinions on low cost USB video capture devices for FMLE?

I have already tried a few such devices. I would at least like to achieve reasonable SD at 720 X 480. HD would be a plus, but not necessary. My camera has HDMI, SDI, and Component and composit out. I have already tried a couple of capture devices, and the results were as follows.
SIIG USB 2.0 Video Capture Device - JU-AV0012-S1
Pretty clear as to why this was so cheap. It claims full NTSC support, but that is only on the input. Output is 320 X 240 only.
DIAMOND USB 2.0 HD Game Console Video Capture Device GC500 USB 2.0 Interface
Again, this unit claims "HD" but that is only on the input. Output is 640 x 480. The image quality was terrible with the supplied software, or with Adobe FMLE. Noisy, and well below full NTSC quality. Even when fed with the component out of a Sony NX5. Unacceptable. Even for the bargain price at Frys.
Hauppauge HD PVR 2 Gaming Edition
Seems I bought a dud. I went back and forth with Hauppauge support, and never could get this to be detected by FMLE, or the included software. On doing a search online for the error message I received, I discovered many similar trouble reports on various forums. I bought this one at a discounted price. Perhaps this is the reason why.
The notebook I have is a Windows unit, with no expresscard slot, or 1394 input (unfortunately). I did look briefly at the Blackmagic Intesity Shuttle, but it needs USB 3.0.
Curious to hear of any sucess with USB capture and FMLE, and with a device under (hopefully well under?)$200.

I've been streaming with the ION Video2PC capture device...it works flawlessly with no problem. The machine I've been testing it on can only pump out 480p or 540p at the most. But, I'm sure if I used it on a faster machine I would get way better results. You can find them used under $30 bucks online and unlike most cheap capture/input devices, you can access the video and audio in FMLE. Just thought, I'd share they info.

External video capture devices?

I'll be getting a Macbook Pro soon and I have a older Sony camcorder that doesn't have USB or fire wire. It's only output is composite and L R audio. Can anyone recommend a good external video capture device that works with a mac and Final Cut Express?

Hello,
I'm currently using a Canopus ADVC110 analog/digital converter with no problems with Final Cut Express 4.0.
You can see more details about the device on http://www.canopus.com/products/ADVC110/index.php
I bought my new one on eBay and paid almost half the current price.
Regards,
Armando.

Problem with video capture device, with a virtual camera

Similar Messages

Maybe you are looking for