Regd: BEE Spreadsheet Interface for Excel 2007

Hi All,
After accesing the BEE Spreadsheet Interface function it prompts me to download file. After allowing the download file.. it opens up an excel sheet prompting for WEB_ADI[1].xls to be downloaded on the system.
the it says Processing: Create Document. Your document is being created. Do not close this window until processing completes.
The excel sheets gets struck at this point. it does not download the file..
I have also changed the Excel 2007 Trust center options and enabled Trust access to VBA objects and Enable all macros.
My profile options are set as
BNE UIX Base Path : /OA_HTML/cabo/
BNE UIX Physical Directory : /u02/oratrng/trnmlgappl/html/cabo/
Can someone guide if i am still missing any setups or options..................
Thanks in advance,
Prashanth

Hi,
OK fine the sheet got dowloaded now.. But after that i am facing a new problem ..after i enter the details in Excel and try ot upload thm it gives me error : Connection to the server is unavialable. This is a common error, so please check the BNE.log file for details about the error.
You may also review these documents and see if any is applicable.
Note: 553134.1 - The Connection To The Server Is Unavailable When Uploading Journals From Webadi
Note: 553851.1 - Webadi Upload Fails In RAC Environment; Message: The Connection To The Server Is Unavailable
Note: 394680.1 - Error -The Connection to the Server is Unavailable When Upload Web ADI - Interface Columns Integrator
Note: 361944.1 - The Connection To The Server Is Unavailable When Uploading Journals From WebADI
Note: 334632.1 - Web ADI Create Document Fails - Connection to The Server is Unavailable Error on Worksheet
Note: 419995.1 - WebADI Upload ''Connection To The Server Is Unavailable'' While Uploading
Note: 428643.1 - CONNECTION TO SERVER ERROR DURING UPLOAD OF MORE THEN 144 LINES
Note: 847091.1 - Error 'The Connection To The Server Is Unavaiable' when Uploading WEB ADI Document
Note: 359584.1 - Webadi Cannot Upload Adi Spreadsheet (The Connection To Server Is Unavailable.)
Note: 329926.1 - BNE.D Web ADI Letters Fail to Export Download is an Empty Document - Spreadsheet
Note: 271811.1 - Connection Unavailable Error Occurs When Uploading Files In Web Adi
Regards,
Hussein

Similar Messages

  • Which TDM Addin for Excel 2007?

    I downloaded what I think is the latest TDM add-in for excel 2007.  When I go to open my file a message comes up saying that my file has more than 65000 rows.  I know the limitation is not in excel 2007.  Will the add-in only load 65000 rows of data? 

    Frank,
    So the installation of the addin went smoothly?  You did not have to add it in manually like in this KB?
    http://zone.ni.com/devzone/cda/tut/p/id/5885
    You may want to check the specs on the trial version of excel 2007 that you have.  Did you get this from the web?  I don't know if Microsoft would do this, but sometimes the trial software won't have all of the features of the full version.  I just installed the addin on my machine with full version of excel 2007 and was able to open a TDM file with a million random numbers stored in it. 
    A good way to test this would be to just create a spreadsheet file with 100,000 numbers in it, then try to open that in excel just to see if it throws the same error.  That would eliminate the possibility of the addin being to blame.  If the file opens without error, then you may want to check that the addin was installed correctly by referencing the KB linked above.
    Have a great day.
    Brian Coalson
    Software Engineer
    National Instruments

  • BEE Spreadsheet Interface

    Hi,
    When i click on "create batch" button in BEE Spreadsheet Interface, I encountered the following error.
    Web ADI Configuration Error
    Error
    BNE_UIX_PHYSICAL_DIRECTORY is not configured.
    Cause
    Action
    KIndly send me some doument on BEE Spreadsheet Interface
    Regardss
    Murugan

    Hi,
    What is the application release?
    What is the value of "BNE UIX Physical Directory" profile option?
    Verify the value of the profile options outlined in this document and check then (remember to bounce the application services).
    Note: 549758.1 - Web ADI Configuration Validation - Error BNE_UIX_PHYSICAL_DIRECTORY is not configured
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=549758.1
    If the above does not help, see the following documents.
    Note: 430991.1 - Error BNE_UIX_PHYSICAL_DIRECTORY Is Not Configured in R12 When Attempting To Use WebADI Spreadsheet To Create Hierarchies
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=430991.1
    Note: 452452.1 - R12:Installing, Configuring and Troubleshooting Web ADI (Web Applications Desktop Integrator)
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=452452.1
    Regards,
    Hussein

  • Does anyone know how to hide the export option for excel 2007

    Does anyone know how to hide the export option for excel 2007?
    We are having an issue with negative numbers downloading as text field in excel 2007, works fine in excel 2003.
    We are on version 11.1.1.7.0 of OBIEE.
    Thanks for any response.

    Go to iTunes>Preferences>Devices and highlight the backup you want to delete and click on Delete Backup

  • Error running XL Reporter: 'a required COM add-in program..' for Excel 2007

    I have 2 users running Excel 2007 that can't run XL reporter.  They get the message 'a required COM add-in program for XL Reporter has not been loaded'.  I have instructions for Excel 2003, but not for 2007.  Does anyone know how to resolve this for Excel 2007?

    Gordon,
    I have instructions to get the IXXLReporter.dll file in the installation area, but 2007 has completely different layout. I can't find where to go???  Can you please give me the procedure?
    Edited by: Pat Frohlich on Apr 1, 2009 10:12 AM

  • TS1702 Spreadsheet app for excel - can't find it now in the store ???

    A few years ago I DL'd a spreadsheet app (for excel).  Believe it was Free.  When I tried to install the app on my iPhone 4s (had a 3GS) it would open then immediately close.  It's logo was the white Sum symbol over a blue background.  Can't find it now in the app store.  It was better than others I've seen.  I have files that I'd like to continue to use on the 4S but I need to resolve the app issue.  Since I can't open the app, I can't see who the developer is so I can contact them.  Any help would be appreciated.   Please respond
    <Email Edited by Host>

    The Mountain Lion installer is stored in Applications. Open a Finder window, choose Applications in the sidebar, double-click the OS X Mountain Lion installer and follow the steps.
    Make a backup of your files with Time Machine and check that your applications are compatible > http://www.roaringapps.com

  • Interface for Excel - Error

    HI,
    When i am  trying to open Interface for Excel from  BPC Admin, Getting below error  "Error HRESULT E_FAIL has been returned from  call to a COM Component"
    Any idea how to solve this issue?
    Thank you in advance

    ITs working fine now...but not sure what fixed the problem;

  • Interface for Excel does not work in Windows 7 - Important

    Hi,
    Im using BPC 75 MS SP04 with a computer Windows 7, IE 9, Office 2007. Apparently the Excel works "fine", the issue is that whenever I try to access to Interface for web from the main page (clicking the icon) it does not work, does not do anything...
    What do you suggest to do?
    Working directly in excel is not a problem, accesing to templates vía "Etools - Open dynamic templates" is fine.
    The issue is that users that have every access controlled by BPF's (using Interface for Web)  cannot work.
    Also, we use a template that uses 12 EVDRE reports in the background, we know it is a lot... but it was required like that.
    Once accesing to this template vía Etools -Open dynamic template... Excel gets stuck and I have to force it to shut down.
    Also Im working with a Vista system, Office 2003.
    For this systems, we also use the template EVDRE (12 reports). Once any of both systems access to this specific template, Excel gets stuck and I have to shut it down. Any other template is able to work with, but these 2 machines  (7 and Vista) cant.
    Please help !
    Velázquez

    Hi Velázquez,
    Based on SAP Note: 1603248, IE9 is not supported on BPC 7 and 7.5.
    So you have to revert to IE8.
    Only IE8 and IE7 are supported in 7.5 MS.
    Hope this helps.
    Karthik AJ

  • Ole for excel 2007 SAVEAS failing

    Hi!
    Am using abap+ole and code snippet below is failing; am using Excel 2007 in compatibility mode.
    I just want to save the spreadsheet as a new name.
    Really would appreciate your insights!
    Thanks!
    Jim
    parameters: p_file type localfile default 'C:\temp\zz.xls'.
    data: g_new type localfile value 'c:\temp\zzzzzzz.xls'.
    data: e_work  type ole2_object.
    call method of e_work 'SAVEAS'
              exporting
                        #1 = g_new.
    (returns subrc = 2)

    hi check this..
    Report ZMULTICOLOR_TEST no standard page heading.
    this report demonstrates how to send some ABAP data to an
    EXCEL sheet using OLE automation.
    include ole2incl.
    handles for OLE objects
    data: h_excel type ole2_object,        " Excel object
          h_mapl type ole2_object,         " list of workbooks
          h_map type ole2_object,          " workbook
          h_zl type ole2_object,           " cell
          h_f type ole2_object,            " font
          h_c type ole2_object.            " color
    DATA: FILENAME LIKE RLGRAP-FILENAME.
    tables: spfli.
    data  h type i.
    table of flights
    data: it_spfli like spfli occurs 10 with header line.
    *&   Event START-OF-SELECTION
    start-of-selection.
    read flights
      select * from spfli into table it_spfli.
    display header
      uline (61).
      write: /     sy-vline no-gap,
              (3)  'Flg'(001) color col_heading no-gap, sy-vline no-gap,
              (4)  'Nr'(002) color col_heading no-gap, sy-vline no-gap,
              (20) 'Von'(003) color col_heading no-gap, sy-vline no-gap,
              (20) 'Nach'(004) color col_heading no-gap, sy-vline no-gap,
              (8)  'Zeit'(005) color col_heading no-gap, sy-vline no-gap.
      uline /(61).
    display flights
      loop at it_spfli.
        write: / sy-vline no-gap,
                 it_spfli-carrid color col_key no-gap, sy-vline no-gap,
                 it_spfli-connid color col_normal no-gap, sy-vline no-gap,
                 it_spfli-cityfrom color col_normal no-gap, sy-vline no-gap,
                 it_spfli-cityto color col_normal no-gap, sy-vline no-gap,
                 it_spfli-deptime color col_normal no-gap, sy-vline no-gap.
      endloop.
      uline /(61).
    tell user what is going on
      call function 'SAPGUI_PROGRESS_INDICATOR'
         exporting
              PERCENTAGE = 0
               text       = text-007
           exceptions
                others     = 1.
    start Excel
      create object h_excel 'EXCEL.APPLICATION'.
    PERFORM ERR_HDL.
      set property of h_excel  'Visible' = 1.
    CALL METHOD OF H_EXCEL 'FILESAVEAS' EXPORTING #1 = 'c:\kis_excel.xls'  .
    PERFORM ERR_HDL.
    tell user what is going on
      call function 'SAPGUI_PROGRESS_INDICATOR'
         exporting
              PERCENTAGE = 0
               text       = text-008
           exceptions
                others     = 1.
    get list of workbooks, initially empty
      call method of h_excel 'Workbooks' = h_mapl.
      perform err_hdl.
    add a new workbook
      call method of h_mapl 'Add' = h_map.
      perform err_hdl.
    tell user what is going on
      call function 'SAPGUI_PROGRESS_INDICATOR'
         exporting
              PERCENTAGE = 0
               text       = text-009
           exceptions
                others     = 1.
    output column headings to active Excel sheet
      perform fill_cell using 1 1 1 200 'Carrier id'(001).
      perform fill_cell using 1 2 1 200 'Connection id'(002).
      perform fill_cell using 1 3 1 200 'City from'(003).
      perform fill_cell using 1 4 1 200 'City to'(004).
      perform fill_cell using 1 5 1 200 'Dep. Time'(005).
      loop at it_spfli.
    copy flights to active EXCEL sheet
        h = sy-tabix + 1.
        if it_spfli-carrid cs 'AA'.
          perform fill_cell using h 1 0 000255000 it_spfli-carrid.
        elseif it_spfli-carrid cs 'AZ'.
          perform fill_cell using h 1 0 168000000 it_spfli-carrid.
        elseif it_spfli-carrid cs 'JL'.
          perform fill_cell using h 1 0 168168000 it_spfli-carrid.
        elseif it_spfli-carrid cs 'LH'.
          perform fill_cell using h 1 0 111111111 it_spfli-carrid.
        elseif it_spfli-carrid cs 'SQ'.
          perform fill_cell using h 1 0 100100100 it_spfli-carrid.
        else.
          perform fill_cell using h 1 0 000145000 it_spfli-carrid.
        endif.
        if it_spfli-connid lt 400.
          perform fill_cell using h 2 0 255000255 it_spfli-connid.
        elseif it_spfli-connid lt 800.
          perform fill_cell using h 2 0 077099088 it_spfli-connid.
        else.
          perform fill_cell using h 2 0 246156138 it_spfli-connid.
        endif.
        if it_spfli-cityfrom cp 'S*'.
          perform fill_cell using h 3 0 155155155 it_spfli-cityfrom.
        elseif it_spfli-cityfrom cp 'N*'.
          perform fill_cell using h 3 0 189111222 it_spfli-cityfrom.
        else.
          perform fill_cell using h 3 0 111230222 it_spfli-cityfrom.
        endif.
        if it_spfli-cityto cp 'S*'.
          perform fill_cell using h 4 0 200200200 it_spfli-cityto.
        elseif it_spfli-cityto cp 'N*'.
          perform fill_cell using h 4 0 000111222 it_spfli-cityto.
        else.
          perform fill_cell using h 4 0 130230230 it_spfli-cityto.
        endif.
        if it_spfli-deptime lt '020000'.
          perform fill_cell using h 5 0 145145145 it_spfli-deptime.
        elseif it_spfli-deptime lt '120000' .
          perform fill_cell using h 5 0 015215205 it_spfli-deptime.
        elseif it_spfli-deptime lt '180000' .
          perform fill_cell using h 5 0 000215205 it_spfli-deptime.
        else.
          perform fill_cell using h 5 0 115115105 it_spfli-deptime.
        endif.
      endloop.
    EXCEL FILENAME
      CONCATENATE SY-REPID '_' SY-DATUM6(2) '_' SY-DATUM4(2) '_'
                  SY-DATUM(4) '_' SY-UZEIT '.XLS' INTO FILENAME.
      CALL METHOD OF H_MAP 'SAVEAS' EXPORTING #1 = FILENAME.
      free object h_excel.
      perform err_hdl.
          FORM FILL_CELL                                                *
          sets cell at coordinates i,j to value val boldtype bold       *
    form fill_cell using i j bold col val.
      call method of h_excel 'Cells' = h_zl
        exporting
          #1 = i
          #2 = j.
      perform err_hdl.
      set property of h_zl 'Value' = val .
      perform err_hdl.
      get property of h_zl 'Font' = h_f.
      perform err_hdl.
      set property of h_f 'Bold' = bold .
      perform err_hdl.
      set property of h_f 'Color' = col.
      perform err_hdl.
    endform.                    "FILL_CELL
    *&      Form  ERR_HDL
          outputs OLE error if any                                       *
    -->  p1        text
    <--  p2        text
    form err_hdl.
      if sy-subrc <> 0.
        write: / 'OLE-Automation Error:'(010), sy-subrc.
        stop.
      endif.
    endform.                    " ERR_HDL
    regards,
    venkat

  • Showing Zero values in OLAP Pivot Table for Excel 2007

    Hello,
    I needed a help to a problem. Is it possible to show the values with No sales in an Olap Pivot Table ??
    I have a sales Cube, and brwsing it via excel i wanted to filter on a Product Category and see how many products in this category had made no Sales. By default the Pivot table doesn't shows the empty values, so if i check the Showm empty rows option for
    Pivot Tables, i see the whole of the products populated with and without sales, and i can't filter further. Is there a way i can only get those which have no sales.
    Vinish Viswanathan

    Happy Holidays,
    I can slice on product categories in Excel 2013 with these settings for the Pivot Table:
    Activate "Show items with no data for rows and columns"
    Apply a value filter that says that the measure should filter on values = 0
    Have the product natural hierarchy on rows with levels product category->subcategory->product.
    Expand the levels below product category
    Use the product category attribute and not the hierarchy as the filter.
    I do not have Excel 2007 installed anymore.
    HTH
    Thomas Ivarsson

  • Patch level for Excel 2007 (Release 640)

    Hi!!!
    Do you know which patch level is necessary for the interaction between SAP and Excel 2007??
    We have pach level 22 and when we try to download some ALV using the button "Microsoft Excel", SAP opens a page of Excel without information.
    Thanks a lot!
    Lluís i Montse

    Hello
    Check your macro settings in Excel 2007.
    1)  Open Excel
    2)  Click on the round office button at the top left of the window
    3)  Click Excel Options at the bottom
    4)  Choose Trust Center on the left
    5)  Click the Trust Center Settings button
    6)  Click Macro Settings on the left
    7)  Choose "Disable all macros with notification"
    8)  Click OK, then Click OK again
    When you try your ALV again, it should ask you if you want to Enable the macro, click Enable then it should work.
    Hope this works for you
    Reid Maulsby

  • Table Interface for Excel report?

    I have been working with the nice feature of MODIFY_TABLE in web tables. It is very usefull to alter the table to more specific needs.
    Now my question: is there a possibility to modify classes so that you can adapt the table before it is shown in an excel sheet?
    Thank you in advance!
    Bart

    Hi Deepak,
    I was already thinking in 'my solution': starting from an Excel workbook that opens a web report, searches the result table and transforms this table into the Excel sheet.
    1° Opening an url in Excel.Tis is possible in Excel. So in worst case we have to use string operations to filter the result tabel in the web page and transform a html table into an Excel tabel.
    2° Layout of the html table When we want the current status of the report (with drill down and things like that), we should first make a bookmark. Then we can use this bookmark as url to open the web page in Excel. -> layout and current drill status can be imported from HTML into Excel.
    3° authorization. As the url will open a web page on the WAS server, the user will have to provide a username and password. So this problem is also 'solved' because the authentication is done by the server.
    Concerning the "Print with Excel" method...
    1° If I am right, changes made by JavaScript do not effect the exported Excel report as JavaScript is client side, so the server (the instance that generates the excel) is not aware of the changes made by JS. Right or do I forget something?
    2° My biggest concern is the use of xslt in the html code. This is not very handy for people who are not familiar with html. Besides, not all the changes I make in the xslt have effect on the result (for example: when the printed table takes more than one table, the column headers are not repeated on every page, at least not in a dynamic way). But maybe it is a mistake from my side
    When I would work with an Excel workbook that takes an url and creates the report itself by extracting the data, extra macro's could be added (I think this is not possible by using xslt or Office HTML)
    Thank you for you comments Deepak!

  • Errors opening Excel 2007 spreadsheets in Excel 2010

    When I try to open spreadsheets created in Excel 2007 with Excel 2010, I get the error:  "Excel found unreadable contenct in 'file name'.  Do you want to recover the contents of this workbook?  If you trust the source of this workbook, click
    Yes".  Then a Repairs dialog box comes up saying:  "Excel completed file level validation and repair. Some parts of this workbook may have been repaired or discarded.    Removed Part: Print options."  File then opens fine. 
    We receive Excel 2007 from various sources.  One of my problem is that we are just starting to migrate people to Windows 7 and Office 2010, with most people still on Office XP.  The file format converter for Excel 2002/2003 does not work with these
    Excel 2007 files.  The other problem is that we have macros that are used to open Excel files and import data into other Excel files.  Pretty hard to modify these macros to allow for some files that are going to pop up this error, and others that
    do not.
    What is causing this problem, and what fix is available?  We have asked that people save the Excel files in Excel 97-03 format before sending to us, with mixed results. 

    Hi,
    Thank you for using Excel IT Pro Discussions forum. 
    Are you using Office 2010 RTM version? If it is trial version or beta version, I suggest upgrading it to the RTM version.
    First, please check if this KB article helps:
    Error message when you try to open a workbook in Excel 2007: "Excel found unreadable content in Book_Name"
    http://support.microsoft.com/kb/929766
    Note: The steps are for Excel 2007. The steps in Excel 2010 are similar.
    If the problem persists, let’s also check the following settings in Excel 2010.
    ========
    1.      
    In Excel 2010, click File > Options > Trust Center > File block settings.
    2.      
    Check the checkboxes before:
    Excel 2007 and later Wordbooks and Templates
    Excel 2007 and later Macro-Enabled Workbooks and Templates
    Excel 2007 and later Add-in Files
    Excel 2007 and later Binary Workbooks
    Then, try to open the Excel 2007 file in Excel 2010 and check the results again.
    Best Regards,
    Sally Tang
    TechNet Subscriber Support
    in forum
    If you have any feedback on our support, please contact
    [email protected]  

  • Excel 2007 and Smart View 9.3.1.4.041

    Dear Experts,
    We are now working with Excel 2007 and Smart View 9.3.1.4.041, and encounter the problem that ervery time open the protected excel file there would be the warning message "Drawing Objectes in one or more sheet(s) in the workbook are protected. Please unprotect them and try to save again."
    Can any one suggest with;
    1. How to set the Excel security settings for Excel 2007 to work for smart view?
    2. How to avoid the message mentioned above while working with Excel 2007?
    3. How to create a protected Excel file to work with Smart View 9.3.1.4.041 both in Excel 2003 and Excel 2007?
    Tks
    Edited by: Moonlight on May 19, 2010 10:00 AM

    I've experiencied similiar problems, though other users may have found a better solution, I've unlocked the spreadsheat, refreshed, and then relocked via a VBA macro. A button object at the top of the spreadsheet was added to make it easier for the users use as well. If there is a better solution I am very interested in this as well.
    JTF

  • How to make restoration of corrupted excel 2007 file?

    Hi there, 
    When I open an excel file the following error message is displayed: “The file may be corrupted, located on a server that is not responding, or read only”.
    Since this happened whenever I open any excel file, the above error message is again displayed, I must also mention that I am sure my files are not read-only and the files are stored on my hard disk and I use VM ware and my OS is windows server! 
    How can I solve this problem?

    You may copy the file to another computer with Excel installed, and open it. If the error still exist, then your file is corrupt. Otherwise, there may be some problems with your Excel in the original computer and you need to uninstall/reinstall Excel.
    If the file is corrupt, then you can try several methods to recover it:
    1. First of all, you can try to repair the file manually in Excel, as follows:
    (1) On the File menu, click Open.
     (2) In the Open dialog box, select the file you want to open, and click the arrow next to the Open button.
     (3) Click Open and Repair, and then choose which method you want to use to recover your workbook.
    You may find more information about this at:
    http://office.microsoft.com/en-us/ex...001034656.aspx (for Excel 2003)
     http://office.microsoft.com/en-us/ex...017.aspx?CTT=1 (for Excel 2007)
     http://office.microsoft.com/en-us/ex...840.aspx?CTT=1 (for Excel 2010)
     http://office.microsoft.com/en-us/ex...554.aspx?CTT=1 (for Excel 2013)
    2. If method 1 fails, there are still several methods to recover your Excel file manually with Excel, including writing a small VBA macro, as below
    http://office.microsoft.com/en-us/ex...#_Toc337637262
    3. Third, there are also free tools from third-parties that can open and read Microsoft Excel files, for example,
    3.1 OpenOffice at http://www.openoffice.org. This is a very famous open source project that is designed to support Office file formats, including Excel files. The software can run under Windows.
    3.2 KingSoft Spreadsheets at
    http://www.kingsoftstore.com/office/free-excel. This is a free Windows tool that can open Excel files.
    3.3 Google Drive at https://drive.google.com/ also support to load Excel files.
    Sometimes when Excel fails to open your file, these tools may be able to open it successfully. If that is the case, then after the Excel file is opened, you can just save it as a new file which will be error-free.
    4. For xlsx files, they are actually a group of files compressed in Zip file format. Therefore, sometimes, if the corruption is only caused by the Zip file, then you can use Zip repair tools such as WinRAR at
    http://www.rarlab.com to repair the file, as follows:
    4.1 Assuming the corrupt Excel file is a.xlsx, then you need to rename it to a.zip
    4.2 Start WinRAR, go to "Tools > Repair Archive" to repair a.zip and generated a fixed file a_fixed.zip.
    4.3 Rename a_fixed.zip back to a_fixed.xlsx
    4.4 Using Excel to open a_fixed.xlsx.
    There may still be some warnings when opening the fixed file in Excel, just let ignore it and Excel will try to open and repair the fixed file. If the file can be opened successfully, then you can just save the contents into another error-free file.
    5. If all above methods do not work, then you may try third-party tools such as DataNumen Excel Repair at
    http://www.datanumen.com/excel-repair/
    I have used it to recover some Excel files successfully. It provides a free demo version so that you can try to see if the data you want can be recovered or not.
    Good luck!

Maybe you are looking for