Registering ABAP system with SLD Web AS JAVA

Hello,
I'm trying to register an ABAP only system with an SLD that resides on a JAVA-only system. When registering the ABAP system in RZ70, I enter the gateway host of the JAVA-only system and the gateway service as "sapgw<instance>". However, when looking at the java-only system, I don't see that the gateway is even running.
The JAVA only system is running on Windows 2008.
A couple questions:
1) Is "sapgw<instance>" the gateway service on a java-only system?
2) If the gateway is running, does it show in the services or in the SAP MMC?
3) I've tried starting the gateway manually using "gwrd -force pf=<start profile>" and the dev_rd log says"***LOG S00=> GwInitReader, gateway started ( 2980) [gwxxrd.c     1757]
ERROR => [CreateOsShm] CreateFileMapping(5,4 KB) failed with Err=5
              EIO*: Input/output error OR: Access is denied. [shmnt.c      2174]
ERROR => ShmCreate: Create (5,4096,1) failed [shmnt.c      506]
Is this the right way to start the gateway?
Any help would be greatly appreciated.
Thanks,
Dale Dingmann

Hi Dale,
could you please tell us which Release your AS Java is? I have an AS Java 7.01(UsageType EP) on an AIX machine with a local SLD to which an AS ABAP 7.01 should register. I am not sure whether I can use the solution mentioned above or whether I have to install a standalone gateway.
System Landscape Directory Planning Guide (March 2010, page 43) quotes quite a similar solution but without Information concerning the release. This information also belongs to a standalone SLD. The last three scentences of SAP Note 1057720 quotes that for releases up to and including Release 7.0 one has to install a standalone gateway. In higher releases however "the SCS of the AS Java installs an RFC gateway and configures it as the default in the SLD". Is AS Java 7.01 a higher release than 7.00 and how can I check wheter there is an installed Gateway on SCS instance or not?
Can someone clarify that point?
Best Regards

Similar Messages

  • Deployment proplems for PRD-System with CTS (Web AS JAVA)

    Hello!
    We have a 3-Step-Landscape for deployment:
    DEV
    QoS
    PRD
    Using the portal i have an environment which shows an instance of SAP GUI for HTML, where i can choose
    *CTS Browser
    *STMS Queues
    I can deploy EAR archives to the DEV System and transport it to the PRD. But the step to the PRD-System ist hanging. The protocol is showing, that there is still a session active:
    Deployment                                                                               
    Transportauftrag    : DE0K900382                                                                               
    System              : DZ1                                                                               
    tp Pfad             : tp                                                                               
    Version und Release : 372.04.04 700                                                                               
    Deploy Service called with following parameters:                                                                               
    CommunicationData-Type:0                                                                               
    CommunicationData-Address:http://bbmagz1:50018                                                                               
    CommunicationData-Host:bbmagz1                                                                               
    CommunicationData-Port:50018                                                                               
    CommunicationData-User:'filled'                                                                               
    CommunicationData-Password:'filled'                                                                               
    Deployable(0)                                                                               
    Deployable-Type:0                                                                               
    Deployable-Id:/usr/sap/trans/data/DE0K900382/avitumtec-ear-1.0.ear                                                                               
    class java.rmi.RemoteException:Another Session=[Local port:0, Host:bbmagz1, Port:50018, SessionID:1]                                 
                >>>is still valid - cannot create a new one                                                                               
    Deployment                                                                               
    Endedatum und -zeit : 20080922093201                                                                               
    Beendet mit Returncode:  ===> 12 <===   
    I read that there could be some deployment problems, because SDM is Single-Threaded. We already restarted the PRD-System, but that was without any effect. Can s.o. tell me what i can do, or what i have to say to our Administration people, that the running session will be killed?
    With best regards

    Hi All,
    Any responses here?
    Do we have a setting to control the session ID using which for deployment port 50018 would be connected while import.
    Regards,
    Karan Shah

  • In SLD WEB AS JAVA systems

    hi,
    I had a small query that for WEB AS ABAP we use application systems like APO,SCM etc
    but for WEB AS JAVA . which application systems are used ?
    regards
    guna

    Hello Guna,
    WEB AS JAVA . which application systems are used ?
    Web AS Java systems) automatically report information to the SLD about the elements that they contain by using the SLD data supplier programs. You need to manually register the following types of system only:
    ·        Standalone Java systems
    ·        Third-party systems
    To manually register these systems – and if you want to maintain additional data about automatically registered systems – you use the technical system browser.
    WEB AS JAVA . which application systems are used ?
    Database Only as Data Source
    Description: All user, user account, role, and group data is stored in the database of the SAP Web Application Server Java.
    Use case: You can use this scenario if UME is only used by dedicated Java applications that do not need to connect to ABAP systems or third-party systems. An example is a Web Application Server Java that is used as a developer workplace for small desktop development
    Configuration file: dataSourceConfiguration_database_only.xml
    Thanks,
    Satya

  • [SLD] Autoregistration of ABAP System in SLD

    Hi,
    want to registrate an ABAP system in SLD.
    RZ70 create errors, because RFC destination is missing. 
    Trying to create a destination type T to the SLD sytstem. I'm
    using same parameter as define in another system that is
    also connect to SLD, but he doesn't recognize the gateway service.
    Without gateway information he says that the programm is not
    registered yet.
    Where to register the programm? In ABAP system or XI?
    thanks

    Hi,
    you can find the solution here.........
    XI Software Logistics Solution III: CMS                                                  
    XI Software Logistics Solution III: CMS                                                  
    XI Software Logistics II: Overview                                                  
    XI Software Logistics II: Overview                                                  
    XI Software Logistics 1: SLD Preparation                                                  
    XI Software Logistics 1: SLD Preparation                                                  
    SLD: General recommendation how to set up the system landscape directory                                                  
    SLD: General recommendation how to set up the system landscape directory                                                  
    TechEd '07: LCM228 - SAP NetWeaver System Landscapes                                                  
    TechEd '07: LCM228 - SAP NetWeaver System Landscapes                                                  
    TechEd '07: LCM112 - System Landscape Directory of SAP NetWeaver: Concepts and Best Practices                                                  
    TechEd '07: LCM112 - System Landscape Directory of SAP NetWeaver: Concepts and Best Practices                                                  
    Sizing a System for the System Landscape Directory of SAP NetWeaver                                                  
    Sizing a System for the System Landscape Directory of SAP NetWeaver                                                  
    An overview of the documentation required to set up the system landscape directory (SLD) of SAP NetWeaver                                                  
    An overview of the documentation required to set up the system landscape directory (SLD) of SAP NetWeaver                                                  
    Planning a Strategy for the System Landscape Directory (SLD) of SAP NetWeaver                                                  
    Planning a Strategy for the System Landscape Directory (SLD) of SAP NetWeaver                                                  
    ULM206: Landscape Strategies for the System Landscape Directory of SAP NetWeaver                                                  
    ULM206: Landscape Strategies for the System Landscape Directory of SAP NetWeaver                                                  
    Thanks,
    Madhu

  • EWA on Non-ABAP System with Solution Manager EHP 1

    Hi Experts,
    We have recently updated our solution manager from SP Stack 16 to EHP1 (sp 18). we are now planning to set up EWA for non-abap components (EP 7.0). however, the only SAP note that i have been able to find is "976054 - Availability of EWA for Non ABAP components" but this is only limited up to SP 17. I have not been able to find any guides relating to EWA thru Solution Manager EHP1.
    I would greatly appreciate if anyone can refer any documents or SAP notes that would enable setting up EWA for non-abap components thru Solution Manager EHP1.
    We have also gone through the note 1332428, but we have'nt found it useful. We are still struggling to generate EWA report on Non-ABAP system.
    Looking forward to your kind help.
    Thanks and Regards,
    Sarthak Syal

    Hi Sarthak,
    Good!!
    Please do  the following:
    1) include the system in the Solution and scheduled the EWA session.Logical component should refer to the Non-ABAP System with no ABAP instance as relevant under the SID definition in SMSY-systems.
    2) Is the Non -ABAP ( assuming its java) has the Software component defined and is mentioned as relevant under the SID with the component name and type.
    3) Having said that SMD - Root cause Analysis functionality is configured-> check whether you are getting the Details for the Non-ABAP systems in the analysis Tabs of Root Cause Analysis.
    This should be good to go. Wait for the session to get completed.
    Thanks,
    Jagan

  • Pushing data from abap system to SLD

    Hello,
    I am pushing data from my abap system to SLD.
    Job SAP_SLD_DATA_COLLECT is successfully finished but the job SAP_LMDB_LDB_0000000001. is not visible in sm37 in solman.
    Hence technical system is not visible in LMDB.
    Please guide me
    Thanks and Regards,
    Akshay

    HI Akshay
    I hope you had make sure that in SM61 you have assigned batch servers for the jobs.
    Can you try to sync your LMDB with SLD once. There is option in LMDB to sync the data, Just see if you are getting the technical system details.
    Also, please check the rfc destinatoin with ICM port if it is stable.
    RFC LMDB_SyncDest<X> is using ICM Port 80<NR>
    You can proceed as below
    Please De-Activate the Sync Job in Solman_Setup -> System Preparation -> Prepare Landscape -> Set Up LMDB.
    Execute transaction 'SM59'.
    Locate the HTTP Destination -> 'LMDB_SyncDest<X>'.
    Switch to Edit mode.
    Change the Service No to 5<XX>00 where XX is the instance number.
    Then makesure the Authorization and Connection test are working.
    Then Re-Activate the synch job, via Solman_Setup -> System Preparation -> Prepare Landscape -> Set Up LMDB
    Apart from that, can you check below note if it is applicable for you
    1615263 - LMDB: Incremental Content Sync Job remains "Scheduled"
    Regards
    Rishav

  • SID Problem : could not register two ABAP systems with same SID

    Dear Expert:
    We have to register two ABAP systems on different host to SLD, and these two systems have same SID.
    We use rz70 to do this,  but we found the lastest registration will overwrite the previous registration,
    that
    means we could register them both in the same SLD. (we checked this in Technical system area).
    How could we do this?  It makes us crazy........
    Thanks very much
    Ray

    Dear Stefan,
    Thanks so much for your anwser.
    But the dilemma is in one SLD we achieved this, but it is only for one case and we could
    not apply this for other systems.
    This is the snapshot in our SLD for techical system:
    Name                                        Host                             Version                                     Last Update
    D01   on eisdq01                     eisdq01                         700                                           2010/12/06 12:45
    D01   on eisdv01                     eisdv01                         640                                           2010/12/06  11:40
    We don't know if this is the illusion that SLD could do this?  But for other systems, e.g two Q systems
    the lastest registration will overwrite the previsou one.
    Thanks very much.
    Welcome suggestions from very guru.
    Ray

  • Issue in registering ABAP stack into SLD

    Hi all
    The issue is as shown below. I appreciate your help.
    Environment: SLD host-Windows Server 2003, Oracle 10g, WAS JAVA 640 SP19
    CRM ABAP+JAVA 640 host - unix, Oracle
    I was able to register CRM JAVA stack in SLD from Visual Administrator>SLD Data Supplier. The CIM Client Test was successfull.
    When i try to register the CRM ABAP stack from tcode RZ70, i get an error as below:
    SLD DS start program
        0: sapsrm_CRM_05                             : Execute program: SLDAPPL_SERV
        0: sapsrm_CRM_05                             : Execute program: SLDBCSYS
        0: sapsrm_CRM_05                             : Execute program: SLDCLIENT
        0: sapsrm_CRM_05                             : Execute program: SLDCOMPSYS
        0: sapsrm_CRM_05                             : Execute program: SLDDBSYS
        0: sapsrm_CRM_05                             : Execute program: SLDGWSRV
        0: sapsrm_CRM_05                             : Execute program: SLDINSTSC
        0: sapsrm_CRM_05                             : Execute program: SLDINSTSP
        0: sapsrm_CRM_05                             : Execute program: SLDIPSERV
        0: sapsrm_CRM_05                             : Execute program: SLDMSGSRV
        0: sapsrm_CRM_05                             : Execute program: SLDASSOC
        0: sapsrm_CRM_05                             : Collection of SLD data finished
        0: sapsrm_CRM_05                             : Data collected successfully
        0: sapsrm_CRM_05                             : RFC data prepared
        0: sapsrm_CRM_05                             : Used RFC destination: SLD_UC
        0: sapsrm_CRM_05                             : RFC call failed: / CPIC-CALL: 'ThSAPECMINIT' : cmRc=17 thRc=236#SAP gateway connection failed. Is SAP gateway started?
        0: sapsrm_CRM_05                             : Existing periodic jobs removed. Number: 1
        0: sapsrm_CRM_05                             : Program scheduled: 20080506 222324
        1: sapsrm_CRM_05                             : Event-controlled job already exists; scheduling not necessary
    I came to know from other forums in sdn that we need to install/configure separate gateway if the SLD is on a standalone JAVA engine.
    Also, in SM59 SLD_UC, SLD_NUC, SAPSLDAPI are failing with the same error of "RFC call failed: / CPIC-CALL: 'ThSAPECMINIT' : cmRc=17 thRc=236#SAP gateway connection failed. Is SAP gateway started?"
    Please suggest how to resolve this. Please let me know if you need more details.
    Thanks already
    Edited by: Rahul Paul Patchigondla on May 6, 2008 9:57 AM

    Rahul,
    as RK already stated: the SLD has to connect to an SAP gateway, such is running on an ABAP system.
    You may initially try to use the SAP gateway from the CRM ABAP stack. Therefore you will have to adjust the SLD to use that SAP gateway. On 6.40 SLD: Administration / Data supplier bridge / RFC gateway: Server (host name) and Service (combination of sapgw and instance number of CRM ABAP system).
    After that, in CRM SM59 SLD_UC, SLD_NUC, SAPSLDAPI will have to be adjusted accordingly.
    Regards, Boris

  • How to setup EWA for non-ABAP system with SM 4.0 ?

    Hi, we are running SM 4.0 with the support-stack 06. I have set-up a solution for monitoring which includes a NW04 WebAS 6.40 Java only system. Has anyone set-up EWA reports for this type of non_ABAP system who can advise of the steps necessary for this ?
    It seems like you need to define RFC destinations for where the monitored system data should be collected from , but there doesn't appear to be anywhere to do this for non-ABAP systems ?
    I have looked at Note 738676 - Service Data Download for Non-ABAP Components but it hasn't helped and it seems to be SDCC specific, rather than SDCCN.
    Thanks.

    Hi Andrew,
    we are just developing it, at the moment you have the following option, your java system has to send by ccms agends its data to an ABAP 640 system or higher, there you can see its alerts in ccms, then you have to make both system available in SMSY. Then important you have to assign the java system as a system component, then we collect also the java data and shows them in the EWA of the ABAP system. There for go to the main instance tab and set a java main instance to relevant and assign your java system.
    This is the old, available standard solution. At the moment we develop it also for java stand alone.
    I think it will be available with the new ST-SER in autumn
    Regards,
    uDo

  • Errors integrating ABap system in SLD and PI

    Dears,
    I need informations about how to include an Abap system to the SLD , installaed on a different machine, and to make it available for the communication with a PI system.
    It's a silly question but I'm quite confused about the step should be performed. I partially did the integration following the documentaion in my knowledge, but something is missing.....and does not works.
    regards

    Hi refer these links
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b09fe69e-46be-2a10-9fb0-9c11aeaa3557
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40328fc8-4844-2b10-b7a2-8930c16df2ba
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b00462bb-b7a0-2a10-8da6-f6b89834f8b4
    regards,
    Surya

  • Register MOSS system in SLD

    Hello Experts,
    I'd like to know if there is some way I could register a MOSS system (defined as far as I know as a 3rd party system) as a technical system into the SLD?
    As for now, any ABAP or J2EE system is registered automatically to the SLD during installation. What is the case regarding a MOSS system? can it be defined as a Data_Supplier to a SLD_Client?
    Thanks,
    Tomer

    Hello Tomer,
    Its possible.
    Please check https://websmp101.sap-ag.de/~sapidb/011000358700000315592008E
    Regards,
    Abhay

  • SLD Web AS Java

    Dear Expert,
    I accidently deleted the technical system for Web AS Java in the SLD. I am trying to re-create it back, but there are lots of information that i am not sure about it.
    Anyone have the configuration document or show me where can i get those value required.
    Thanks
    Regards,
    Bryan

    Hi pinki,
    Thanks, While in the step 2 of creating java Web As system, it ask for adding the instance list, server nodes and port where it require the following information
    1) Instance List - Instance ID, System Home, Dispatcher Node ID and type
    2)Server Nodes - Node ID, Debug Port Number
    3)Ports - Protocol Type, Port Number. Protocol
    Where can i get these information?
    Thanks
    Regards,
    Bryan

  • Register MOSS system to SLD

    Hello Experts,
    I'd like to know if there is some way I could register a MOSS system (defined as far as I know as a 3rd party system) as a technical system into the SLD?
    As for now, any ABAP or J2EE system is registered automatically to the SLD during installation. What is the case regarding a MOSS system? can it be defined as a Data_Supplier to a SLD_Client?
    Thanks,
    Tomer

    Maybe you can use sldreg?
    Install saposcol and sldreg on windows machine. Use saposcol to generate Hardware Information XML and then use sldreg to send this information to SLD.
    http://help.sap.com/saphelp_nw70/helpdata/en/42/efba5e93d51bc9e10000000a11466f/content.htm

  • Is knowledege in Abap necessary to learn Web Dynpro java

    Hi All,
    I am getting training in Web Dynpro java i want to know whether  knowledege in Abap is necessary to learn Web Dynpro java.
    Thanks & Regards,
    jyothi.

    Hi Joythi,
    No need to have ABAP Knowledge to learn Webdynpro java, but if you want to learn Webdynpro ABAP you need to have ABAP Knowledge.
    Thanks,
    Rahul
    Edited by: rahul.girmaji on Oct 3, 2011 7:34 AM

  • Problem register a system with sconadm

    Hello guys,
    I'm trying to register a Solaris 10 6/06 u2 system using sconadm, but it fails:
    ryna# cat /tmp/RegistrationProfile.properties | grep -v ^# | grep -v '^$'
    userName=__deather
    password=XXXXXXX
    hostName=
    subscriptionKey=
    proxyHostName=
    proxyPort=
    proxyUserName=
    proxyPassword=
    ryna# /usr/sbin/sconadm register -a -r /tmp/RegistrationProfile.properties
    sconadm is running
    Authenticating user ...
    Exception in thread "main" java.lang.NullPointerException
    at com.sun.cns.basicreg.BasicRegCLI.run(BasicRegCLI.java:695)
    at com.sun.cns.basicreg.BasicRegCLI.main(BasicRegCLI.java:562)
    [loops forever]
    ^C
    I've been reading various thread posted here, so here is the usually asked commands:
    ryna# java -version
    java version "1.5.0_16"
    Java(TM) Platform, Standard Edition for Business (build 1.5.0_16-b02)
    Java HotSpot(TM) Client VM (build 1.5.0_16-b02, mixed mode, sharing)
    ryna# cacaoadm get-param java-home
    java-home=/usr/jdk/jdk1.5.0_16
    ryna# cacaoadm status
    default instance is ENABLED at system startup.
    Smf monitoring process:
    1995
    SUNWbrg's dependencies are all satisfied, and the system is almost up-to-date (using PCA, currently).
    If anyone has a clue...
    Thanks!

    Thanks -
    Here is the content of the log file. It seems to work fine at the beginning, but then it break out:
    ryna# cat basicreg20081001115711845.log
    Oct 1, 2008 11:57:40 PM com.sun.cns.basicreg.BasicReg loadPropertiesFromHomeDir
    INFO: properties file loaded from the default config.properties
    Oct 1, 2008 11:57:40 PM com.sun.cns.basicreg.BasicRegCLI printRegistrationProfile
    INFO: userName = __deather
    Oct 1, 2008 11:57:40 PM com.sun.cns.basicreg.BasicRegCLI printRegistrationProfile
    INFO: password = *****
    Oct 1, 2008 11:57:40 PM com.sun.cns.basicreg.BasicRegCLI printRegistrationProfile
    INFO: hostName =
    Oct 1, 2008 11:57:40 PM com.sun.cns.basicreg.BasicRegCLI printRegistrationProfile
    INFO: subscriptionKey = ********
    Oct 1, 2008 11:57:40 PM com.sun.cns.basicreg.BasicRegCLI printRegistrationProfile
    INFO: proxyHost =
    Oct 1, 2008 11:57:40 PM com.sun.cns.basicreg.BasicRegCLI printRegistrationProfile
    INFO: proxyPort =
    Oct 1, 2008 11:57:40 PM com.sun.cns.basicreg.BasicRegCLI printRegistrationProfile
    INFO: proxyUsername =
    Oct 1, 2008 11:57:40 PM com.sun.cns.basicreg.BasicRegCLI printRegistrationProfile
    INFO: proxyPassword = ****
    Oct 1, 2008 11:57:40 PM com.sun.cns.basicreg.BasicRegCLI run
    INFO: Authenticating user ...
    Oct 1, 2008 11:57:40 PM com.sun.cns.basicreg.cacao.ClientLoginCacaoAdapter getSCNClientSession
    INFO: CREATING SCNClientSession
    Oct 1, 2008 11:57:41 PM com.sun.cns.basicreg.cacao.ClientLoginCacaoAdapter$LoginAccountCallbackHandler handle
    INFO: account callback setting username: __deather
    Oct 1, 2008 11:57:47 PM com.sun.cns.basicreg.cacao.ClientLoginCacaoAdapter loginAccount
    INFO: SCNClientSession.login(LoginAccountCallbackHandler) = true
    Oct 1, 2008 11:57:47 PM com.sun.cns.basicreg.cacao.ClientLoginCacaoAdapter loginAccount
    INFO:
    SCNClientLoginMBean.getAuthToken() =
    AQIC5wM2LY4SfcwCRQetDZ09uKP16tZ4mqcMPu6h3mYO13I=@AAJTSQACMDE=#
    Oct 1, 2008 11:57:47 PM com.sun.cns.basicreg.cacao.OfferingCacaoAdapter getOfferingCatalogs
    INFO: catalog: 0
    Oct 1, 2008 11:57:47 PM com.sun.cns.basicreg.cacao.OfferingCacaoAdapter getOfferingCatalogs
    INFO: catalog.scopname: Sun Connection Network
    Oct 1, 2008 11:57:47 PM com.sun.cns.basicreg.cacao.OfferingCacaoAdapter getOfferingCatalogs
    INFO: catalog.scopURI: null
    Oct 1, 2008 11:57:47 PM com.sun.cns.basicreg.cacao.OfferingCacaoAdapter getOfferingCatalogEntries
    INFO: entry: 0
    Oct 1, 2008 11:57:47 PM com.sun.cns.basicreg.cacao.OfferingCacaoAdapter getOfferingCatalogEntries
    INFO: entry name: Use Sun Update Manager and Sun Update Connection to manage updates
    Oct 1, 2008 11:57:47 PM com.sun.cns.basicreg.cacao.OfferingCacaoAdapter getOfferingCatalogEntries
    INFO: entry module name: com.sun.scn.offering.SoftwareUpdate
    Oct 1, 2008 11:57:47 PM com.sun.cns.basicreg.cacao.OfferingCacaoAdapter getOfferingCatalogEntries
    INFO: entry instance name: SoftwareUpdateOfferingInstance
    Oct 1, 2008 11:57:47 PM com.sun.cns.basicreg.cacao.OfferingCacaoAdapter getOfferingCatalogEntries
    INFO: entry config profile: no profile
    Oct 1, 2008 11:57:47 PM com.sun.cns.basicreg.cacao.OfferingCacaoAdapter getOfferingCatalogEntries
    INFO: entry: 1
    Oct 1, 2008 11:57:47 PM com.sun.cns.basicreg.cacao.OfferingCacaoAdapter getOfferingCatalogEntries
    INFO: entry name: Use Sun Update Manager using a local update source, such as Sun Connection Proxy
    Oct 1, 2008 11:57:47 PM com.sun.cns.basicreg.cacao.OfferingCacaoAdapter getOfferingCatalogEntries
    INFO: entry module name: com.sun.scn.offering.SoftwareUpdate
    Oct 1, 2008 11:57:47 PM com.sun.cns.basicreg.cacao.OfferingCacaoAdapter getOfferingCatalogEntries
    INFO: entry instance name: SoftwareUpdateOfferingInstance
    Oct 1, 2008 11:57:47 PM com.sun.cns.basicreg.cacao.OfferingCacaoAdapter getOfferingCatalogEntries
    INFO: entry config profile: no profile
    Oct 1, 2008 11:57:47 PM com.sun.cns.basicreg.cacao.OfferingCacaoAdapter getOfferingCatalogEntries
    INFO: entry: 2
    Oct 1, 2008 11:57:47 PM com.sun.cns.basicreg.cacao.OfferingCacaoAdapter getOfferingCatalogEntries
    INFO: entry name: Register the Solaris software without choosing an update option
    Oct 1, 2008 11:57:47 PM com.sun.cns.basicreg.cacao.OfferingCacaoAdapter getOfferingCatalogEntries
    INFO: entry module name: com.sun.scn.offering.ProductRegistration
    Oct 1, 2008 11:57:47 PM com.sun.cns.basicreg.cacao.OfferingCacaoAdapter getOfferingCatalogEntries
    INFO: entry instance name: ProductRegOfferingInstance
    Oct 1, 2008 11:57:47 PM com.sun.cns.basicreg.cacao.OfferingCacaoAdapter getOfferingCatalogEntries
    INFO: entry config profile: no profile
    Oct 1, 2008 11:57:47 PM com.sun.cns.basicreg.cacao.OfferingCacaoAdapter activate
    INFO: OCA activate: Use Sun Update Manager and Sun Update Connection to manage updates
    Oct 1, 2008 11:57:47 PM com.sun.cns.basicreg.cacao.OfferingCacaoAdapter activate
    INFO: with config: null
    [EOF]
    As the program's output talk about a nullPointerException, we can see here the "with config: null". However, I don't know the sconadm internals to debug this out...

Maybe you are looking for