Registry Server run on which port?

Dear All,
Hi. I installed my Java WSDP. How do I know that whether the Registry Server is running, and which port is the registry server running on?
Can you please advice? Thank you very much.

A sidenote: it's x window or x, windows is a software product from a certain company in redmond, WA.
Also: on unix/linux it's 5801 (access via http/browser using an applet) and 5901 (access via client/native vnc protocol). Only on windows 5800/5900 (vnc port 0) is used.

Similar Messages

How to find out which server is running on which port

hi all,
how to find out which server is running on which port, i want to know both
from front end and backend?
thanks and regards
srikanth

The best source to get all the ports you have is the Context Files.
All ports are defined in the Context Files through "AutoConfig Variable". You can get the list of those variables by referring to the following note under "What is the port pool? What if I want to give a specific value to a Server Port?"
Note: 216664.1 - FAQ: Cloning Oracle Applications Release 11i
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=216664.1
You can also get that list via OAM.
Referring to the installation log file should also be helpful (Unless you have changed any of the ports after the installation).

TCP - which ports?

Hi,
I am making a java applet which communicates with the server using TCP. My question is which ports should be used? Presumably some ports are often blocked by firewalls etc, where as some are not.

Normally a secure internet facing server is only going to have ports open that actually has something using them.
If nothing is using them then they are not open.
And to communicate (connect) you MUST have a server running on the port. So when your write your server what port is is going to connect to?

Warning: Either the server is already running or the port number is invalid. Shut down the MATLAB process in which the server is running or run the server on a different port number.

安装好SIT后，matlab 提示
Warning: Either the server is already running or the port number is invalid. Shut down the MATLAB process in which the server is running or run the server on a different port number.
怎么解决？

这个应该和SIT无关，意思是你有个MATLAB进程占用了某个端口号或者matlab的服务器正在运行，导致你现在的程序没法建立这个端口的服务器。试试刀windows进程管理里把matlab相关的进程kill掉，再启动试试。或者参考链接http://www.cnblogs.com/qiweiwang/archive/2010/07/29/1788281.html 里边有关于建立服务器的描述，就在前半部分。

Hi, we have a G5 Blade server running OS X 10.5.8 with a dual Fibre Channel card. The OS does not read the card and cannot establish connection to the RAID controller. I have tried to move the card to another port with no luck. Ran all the updated softwar

Hi, we have a G5 Blade server running OS X 10.5.8 with adual Fibre Channel card. The OS does not read the card and cannot establishconnection to the RAID controller.
I have tried to move the card to another port with no luck.Ran all the updated software possible. Please can someone advice

Hi,
Was the card previously working in that machine? If it was and you have a G5 tower you could try the card in there. Here is a list of Apple fibre cards and cables which show what's compatible with what. http://support.apple.com/kb/HT1769
The card should appear in the System Profiler under Fibre Channel and PCI Cards.
All the best
Beatle

On which port number WDS server will listen & service when installing on server which is also DHCP server?

hi frineds
in documents we read when we install WDS on the server which is also DHCP server, we must select this check mark :
"do not listen on port 67"
it means we instruct the WDS service not to listen on port UDP 67 to avoid a port conflict between WDS server service and DHCP server service.
So now on which port number WDS server will listen & service ?
thanks in advance

Hi john.s2011,
If Windows Deployment Services and DHCP are running on the same physical computer, this means that the DHCP server is listening on port 67 and is responsible ensuring authorization.
The related KB:
How the PXE Server Works
http://technet.microsoft.com/en-us/library/cc732649(v=ws.10).aspx
The related thread:
DHCP is not responding for WDS
http://social.technet.microsoft.com/Forums/windowsserver/en-US/07f98ac7-cc6f-4385-ba21-2e85bb460c03/dhcp-is-not-responding-for-wds
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
hi Alex.
sorry for delay
thanks a lot
regards

BEA-002606: Weblogic server runs on port 80 - permission denied.

Hi,
I am new to weblogic, just started to playing around with it. I setup weblogic server with a cluster consisting of 2 servers, all running locally. I was trying to configure the web server functionality on weblogic 10.3. I followed the exact steps described at http://edocs.bea.com/wls/docs103/config_wls/web_server.html, but I keep on getting a permission denied error:
<Dec 2, 2008 3:00:10 PM> <Info> <NodeManager> <Working directory is "/opt/bea/user_projects/domains/firstDomain">
<Dec 2, 2008 3:00:10 PM> <Info> <NodeManager> <Server output log file is "/opt/bea/user_projects/domains/firstDomain/servers/server03/logs/server03.out">
<Dec 2, 2008 3:00:12 PM MYT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Server VM Version 10.0-b19 from Sun Microsystems Inc.>
<Dec 2, 2008 3:00:13 PM MYT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3 Fri Jul 25 16:30:05 EDT 2008 1137967 >
<Dec 2, 2008 3:00:16 PM MYT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Dec 2, 2008 3:00:16 PM MYT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Dec 2, 2008 3:00:16 PM MYT> <Notice> <Log Management> <BEA-170019> <The server log file /opt/bea/user_projects/domains/firstDomain/servers/server03/logs/server03.log is opened. All server side log events will be written to this file.>
<Dec 2, 2008 3:00:26 PM MYT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Dec 2, 2008 3:00:41 PM MYT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Dec 2, 2008 3:00:41 PM MYT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Dec 2, 2008 3:00:44 PM MYT> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Dec 2, 2008 3:00:44 PM MYT> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
<Dec 2, 2008 3:00:44 PM MYT> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of Cluster-00.>
<Dec 2, 2008 3:01:14 PM MYT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Dec 2, 2008 3:01:14 PM MYT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Dec 2, 2008 3:01:14 PM MYT> <Notice> <Cluster> <BEA-000162> <Starting "async" replication service with remote cluster address "null">
<Dec 2, 2008 3:01:14 PM MYT> <Notice> <Cluster> <BEA-000162> <Starting "man" replication service with remote cluster address "null">
<Dec 2, 2008 3:01:14 PM MYT> <Notice> <Cluster> <BEA-000162> <Starting "man-async" replication service with remote cluster address "null">
<Dec 2, 2008 3:01:14 PM MYT> <Error> <Server> <BEA-002606> <Unable to create a server socket for listening on channel "Default". The address 172.16.141.1 might be incorrect or another process is using port 80: java.net.BindException: Permission denied.>
<Dec 2, 2008 3:01:14 PM MYT> <Emergency> <Security> <BEA-090087> <Server failed to bind to the configured Admin port. The port may already be used by another process.>
<Dec 2, 2008 3:01:14 PM MYT> <Error> <Server> <BEA-002606> <Unable to create a server socket for listening on channel "Default[3]". The address 127.0.0.1 might be incorrect or another process is using port 80: java.net.BindException: Permission denied.>
<Dec 2, 2008 3:01:14 PM MYT> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason: Server failed to bind to any usable port. See preceeding log message for details.>
<Dec 2, 2008 3:01:14 PM MYT> <Error> <Server> <BEA-002606> <Unable to create a server socket for listening on channel "Default[2]". The address 10.8.8.31 might be incorrect or another process is using port 80: java.net.BindException: Permission denied.>
<Dec 2, 2008 3:01:14 PM MYT> <Error> <Server> <BEA-002606> <Unable to create a server socket for listening on channel "Default[1]". The address 192.168.140.1 might be incorrect or another process is using port 80: java.net.BindException: Permission denied.>
<Dec 2, 2008 3:01:14 PM MYT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Dec 2, 2008 3:01:14 PM MYT> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Dec 2, 2008 3:01:14 PM MYT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
<Dec 2, 2008 3:01:14 PM MYT> <Notice> <Cluster> <BEA-000163> <Stopping "async" replication service>
<Dec 2, 2008 3:01:14 PM MYT> <Notice> <Cluster> <BEA-000163> <Stopping "man" replication service>
<Dec 2, 2008 3:01:14 PM MYT> <Notice> <Cluster> <BEA-000163> <Stopping "man-async" replication service>
<Dec 2, 2008 3:01:15 PM> <Debug> <NodeManager> <Waiting for the process to die: 19768>
<Dec 2, 2008 3:01:15 PM> <Info> <NodeManager> <Server failed during startup so will not be restarted>
<Dec 2, 2008 3:01:15 PM> <Debug> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>
Netstat shows:
netstat -an | grep 172.16.141.1
tcp6 0 0 172.16.141.1:7001 :::* LISTEN
tcp6 0 0 172.16.141.1:7005 :::* LISTEN
tcp6 0 0 172.16.141.1:43991 172.16.141.1:7001 ESTABLISHED
tcp6 0 0 172.16.141.1:7005 172.16.141.1:46728 ESTABLISHED
tcp6 0 0 172.16.141.1:7001 172.16.141.1:43991 ESTABLISHED
tcp6 0 0 172.16.141.1:46728 172.16.141.1:7005 ESTABLISHED
tcp6 1 0 172.16.141.1:43999 172.16.141.1:7001 CLOSE_WAIT
udp 0 0 172.16.141.1:137 0.0.0.0:*
udp 0 0 172.16.141.1:138 0.0.0.0:*
Port 80 is not being used by the IP. Am quite lost at the moment on how to troubleshoot this problem.
Appreciate any advice offered. Thanks in advance.

There's not much benefit to having 2 instances on the same machines vs having one instance on that machine. Putting a load balancer in front of a machine with 2 hosts only helps you when you lose a mgd server - but not when you lose an entire machine ( since both mgd servers go away too )
Consider:
Mgd Server A on machine myHost1 with java memory 512m/512m
Mgd Server B on machine myHost1 with java memory512m/512m
vs
Mgd Server A on machine myHost1 with java memory 1024m/1024m
vs
Mgd Server A on machine myHost1 with java memory1024m/1024m
Mgd Server B on machine myHost2 with java memory 1024m/1024m
The first config is your current situation. Your two mgd servers are fighting each other for processing time & memory on that machine. They can't use the same ports, so how does a user decide which port to use when they access your application?
The second config combines their resources into one mgd server
The third gives you load balancing ability - you can survive the loss of a machine. Also note that since the 2 instances are on DIFFERENT machines, they CAN use the same non-SSL and SSL ports.

Cannot find the CMS server running on port 6400?

Hi all,
I can see all the servers running on bo xi 2 other than the CMS server. If i start running using Administorator nor through the windows administration it displays the message
"Cannot find the CMS server running on port 6400?"
Can anyone explain me how to recitify this issue ?
Thanks
Pooja

On the CMS server launch the CCM and then the CMS is likely red (not started) try to manually start it, if it fails check windows event viewer for errors to see why it failed. Could be the service account (try local system if not specified already).
Regards,
Tim

Nimatlabserver indicates server running but port not open

I have a problem, where matlab release13 tells me that the server is running on xxx port when loaded but checking that with netstat -na from a command prompt the xxx port is not open. My main issue is that I can't figure out why the server doesn't open the port? Anyhting you might have learned would be helpful. I used the main.vi to call the SIT start server.vi and I can see then that the port 6011 is open. I tried multiple ports to open in matlab but nothing works. I am using SIT v2.0

Timmy,
If the SIT server is able to open port successfully, netstat -na will show a TCP port 6011 in Listening state. Failure to open the port should cause an error dialog and is most commonly caused by another application already using the port. More information is needed to diagnose the problem, but make sure that no windows security feature is interfering (ex. windows XP SP2 network security setting)
It is not possible to start multiple ports in one matlab process. You will need to start multiple matlab processes and start server by typing 'NiMatlabServer('start',6012)' for example.
-SumitG

MWA service should run on which server ??

MWA service should run on which server ??
server 1--> admin/internal apache/forms tier
server2--> CM/report server
server3--> external apache tier ( this is configured in DMZ using reverse proxy )

Hi;
If it is prod config than I suggest first rise SR and confirm this structure wiht support.
Please also see MWA Troubleshooting Tips for Release 11i [ID 269991.1] --Section 9 MWA Advanced Configurations
Hope it helps
Regard
Helios

Report server run problem (urgent plz)

i am using developer9i, xp opereting system but i am not able to run report server . infact i dont know where report server reside and how configure report server. otn discussion forum gave me below instructions but i need step by step detail to run report server.
pls help me.
i want to see (Please reffer to Note:204538.1 on
Metalink ) but i could not access metalink.
registration does not alow me. i have no country on
country list and no Support Identifier (CSI, SAC,
Access Code etc.) . but i need access.
please help me. access with path
thanks
mostafizDear see this information this is metalink information
Note:204538.1
Subject: Common Reasons & Troubleshooting: "Unable to communicate with the Reports Server"
Type: BULLETIN
Status: PUBLISHED
Content Type: TEXT/X-HTML
Creation Date: 22-JUL-2002
Last Revision Date: 08-MAR-2005
PURPOSE
========
The main purpose of this document is to list the known causes of the "Unable to
communicate with the Reports Server" error. The terms Reports Server, CGI,
Reports Servlet are also described briefly for a better explanation of this error scenario.
This document includes the following sections :
I. Brief summary on the architecture of Reports Server, CGI and Reports
Servlet
II. Sources of errors encountered when running a report with Reports Server
III. How the CGI (or the Reports Servlet) communicates with the Reports
Server
IV. Possible reasons which lead to "Unable to communicate with the Reports
Server" error.
1) Reports Server is up and running
2) tnsnames.ora and sqlnet.ora problems
3) Effect of parameter "ORACLE_HOME"
4) Effect of parameter "maxconnect"
5) Passing very large parameters to reports server
6) A case specific to OAS 4.0.8.2
7) A case specific to WEBDB version 2.1.0.9.3
V. References
I. Brief summary on the architecture of Reports Server, CGI and Reports Servlet
=================================================================================
In order to understand the causes of the error "Unable to communicate with the
Reports Server", let's first briefly review the Reports Runtime Engines, Reports
Server, the Reports CGI, and Reports Servlet architecture.
There are 4 important layers in Reports Server architecture which should be
understood in order to clearly understand the error "Unable to communicate with
the Reports Server" :
1) The Runtime Engines : This is the main layer where the reports are actually
executed. On unix systems there are "rwrun60" and on NT systems there are
"rwrun60.exe" processes.
2) The Reports Server : The Reports Server recieves the job request and queues
it. When one of its runtime engines becomes available, it sends the
command line to that runtime engine for execution. On Unix systems it is
the "rwmts60" executable and on NT systems it is "rwmts60.exe".
3) The Reports CGI : The Reports Web CGI passes the request to the Reports Server.
The Reports CGI or Servlet converts the request to a command line that can be executed by the Reports Server and
submits it to the specified Reports Server. On Unix platforms this executable
is "rwcgi60" and on NTs it is "rwcgi60.exe.
4) The Reports Servlet : Its functionality and function is just the same as "Reports CGI", but it is
a program written in Java as difference to the CGI program (which is
written in C programming language).
The Reports Server may be running on the same server with the CGI program (or
servlet) OR may reside totally on another machine which does not necessarily have
the same Operating System. For instance CGI may reside in a Windows NT machine
while the Reports server may reside on a Unix box, or any other combination with
Unix-Linux-NT-2000, etc.
The reports are called with a URL similar to below with the CGI :
http://fully.qualified.server.name:PORT/dev60cgi/rwcgi60.exe?server=<REPSERVER>&other_parameters=...........
where fully.qualified.server.name is the name of the server where the Reports CGI
reside, and <REPSERVER> is the name of the server.
II. Sources of errors encountered when running a report with Reports Server
============================================================================
The Reports Web CGI (or the Reports Servlet) makes a call to the Reports Server
and asks it to place the output into some destination (defined by DESTYPE and
DESNAME parameters), then gives back the necessary response to the calling
program. For example if the DESTYPE is "cache", then the Reports server generates
the report to a file in a temporary place and gives it back to CGI and the CGI gives
it back to the calling program. Otherwise, if the DESTYPE is "file", the Reports Server
generates the report output to the requested file and the CGI replies back the
following message : "Report output was successfully written to requested
destination.".
If there is any error in this process, the related error message is returned. The
possible sources of errors can be categorized as follows :
1) The errors that are returned from Reports Server; like the Reports Server can
not find the requested RDF file or the report may be run to file and the
directory where the reports output is asked to be placed does not occur or
similar errors. (Usually the REP-XXXX errors)
2) Another possible cause of error is the errors returned by the RDBMS to the
Reports Server, for example a table not found error or things like that. Of
course from the CGI point of view these errors are again transmitted from the
Reports Server but in fact the error originates from the RDBMS. (Usually the
ORA-XXXX errors)
3) Another possible cause of errors is the CGI itself, for example when the CGI
executable can not connect to the requested Reports Server, then we get the
famous "Unable to communicate with the Reports Server". In this document we will
diagnose the common reasons of this last error.
III. How the CGI (or the Reports Servlet) communicates with the Reports Server
===============================================================================
Having said that "Oracle Reports Server CGI - Unable to communicate with the
Reports Server." error is returned back from the CGI itself, let's discuss the
issue of how the Reports CGI connect to the Reports Server. The name of the
Reports Server given in the URL with "server=....." parameter is, in fact, just
a special tnsnames alias, similar to aliases for database connect strings. As it is
important for the CGI to resolve the alias, the CGI needs to know the HOST name (or the
IP) of the machine where the Reports Server is running and the port on which the
Reports Server is listening. So a typical Reports Server alias is defined as follows :
REP60_<MACHINE>=(ADDRESS = (PROTOCOL = tcp)(HOST = <MACHINE>)(PORT = <PORT>))
This is defined in tnsnames.ora file, and the sqlnet.ora file is also used in
the name resolving operation.
IV. Possible reasons which lead to "Unable to communicate with the Reports Server" error.
==========================================================================================
The possible reasons for the "Unable to communicate with the Reports Server" error :
1) Reports Server is up and running :
Make sure that the Reports Server is really running on the specified server
and listening on the specified port. For details have a look at above
explanations for tnsnames alias of the reports server. And because of this the
CGI could not establish a connection to the Reports Server.
2) tnsnames.ora and sqlnet.ora problems :
As described above, the CGI resolves the details for the reports server using
the "tnsnames.ora" and "sqlnet.ora" files. There may be a problem with them,
here are the possible configuration problems :
a) There is no alias in the tnsnames.ora file for this Reports Server
b) The CGI looks into the wrong directory for the "tnsnames.ora" and "sqlnet.ora"
files. By default the CGI checks the $ORACLE_HOME/net80/admin directory for
these scripts, where the $ORACLE_HOME is the home of the Forms & Reports
installation. Please note that in a typical 9iAS 1.0.X installation there
are two ORACLE_HOME's, one is for the iAS and the other is for the tools,
usually the home for the tools is a directory with name "806" on NT and
"6iserver" on unix systems. By defining TNS_ADMIN in the environment, one
can override the search path for these two files.
The TNS_ADMIN variable can be defined in one of the following places :
i) In the environment : On MS Windows platforms check the "Settings
--> Control Panel --> System". On NTs check the environment TAB and in
Win2K systems check the "Environment Variables" button on Advanced tab.
ii) In "6iserver.conf" file. Details are as follows : The main configuration
file for Apache server is "httpd.conf" file which resides in
$IAS_HOME/Apache/Apache/conf directory. In this file there is a line to
include "oracle_apache.conf" and in this "oracle_apache.conf" file
there is a line to include "$ORACLE_HOME/conf/6iserver.conf" file. And
in this file the TNS_ADMIN variable could be defined as follows :
SetEnvIf Request_URI "rwcgi60" TNS_ADMIN=c:\orant\network\ADMIN
Please note that by defining it this way, the TNS_ADMIN will only be defined
for "rwcgi60" calls, so the other parts of the 9iAS will not be affected by
this setting.
c) In sqlnet.ora the "names.default_domain" is set but in tnsnames.ora the
domain is not defined in the alias description. For example if the
"names.default_domain=world" is present and active in "sqlnet.ora" file
then in the "tnsnames.ora" the alias of the reports server should also have
the ".world" extension appended at the end. And another cause is of course
the vice versa for this. If there is no "names.default_domain" is defined
in the "sqlnet.ora" then the alias in "tnsnames.ora" should not have the
domain extension.
Another important point that should be checked is, if TNS_ADMIN is defined
as described above then the search path is as follows, first the directory
defined by TNS_ADMIN is searched, if the "tnsnames.ora" file is not found in
this directory then $ORACLE_HOME/net80/admin is checked. (And on unix systems
/var/opt/oracle is also checked). These directories are only checked if the file
is not present, so if the "tnsnames.ora" file is present in TNS_ADMIN directory
but the alias is not present, then the other directories are not checked at all.
Let us assume that the tnsnames.ora file is present in the TNS_ADMIN directory but
there is no "sqlnet.ora" files here, then the sqlnet.ora file is checked in
$ORACLE_HOME/net80/admin directory, which could cause the same problem if the
"names.default_domain" is defined in this file.
All the above will result in, CGI to unable to resolve the alias in tnsnames.ora
file so it will not be able to establish a connection to the Reports Server.
3) Wrong "ORACLE_HOME" setting :
Wrong ORACLE_HOME setting. This is usually the case for Reports Servlet,
because the environment settings are defined in "jserv.properties" file for the
servlets and the setting here will effect both the Reports Servlet and the
setting for Oracle JSP and other servlets. So the other servlets or Oracle JSP
may need to set ORACLE_HOME to home of HTTP server while the reports server needs
it to be set to the TOOLS_HOME directory. In this case the best alternative is
not to set ORACLE_HOME in this directory and leave it to registry or defined the
ORACLE_HOME in "6iserver.conf" file just like the TNS_ADMIN defined above. For
details please have a look at the following document :
Note 179609.1 "Getting an error Unable to communicate with the Reports Server
using RWSERVLET"
4) Effect of parameter "maxconnect" :
Another common case for this error is that the CGI request reaches the Reports Server but
the Reports Server refuses connection. The main cause for this case is, that the Reports Server
configuration parameter "maxconnect" is defined too low, there are long running reports on the
server or the server is too busy at that time. Usually a second try some
later time results in a successful connection. If this is the case, the end user
may think that the problem is occasional. For details on this case please
have a look at the following document :
Note 125265.1 "Unable to communicate with the Reports Server"
5) Passing very large parameters to reports server :
Another known reason for this error is, if you are passing large parameters
to the Reports Server which exceeds sqlnet transmission blocks then the request may
end up with this error. To test it try with small parameter values. If you hit
this case, the solution is to increase the SDU (Session data unit size) and the TDU
(Transport unit data size) parameters in tnsnames.ora file, for details please
have a look at the following document :
Note 197358.1 "Passing large parameters to Reports show up a Reports Server
error"
6) A case specific to OAS 4.0.8.2 :
If you are using OAS instead of iAS, and the error appeared after
upgrading to 4.0.8.2 then this is caused because the 4.0.8.2 is using RSF
(Required Support Files) version 8.1.6 and the Reports 6i is using 8.0.6 and the
two could not reside in the same ORACLE_HOME directory. So the solution for this
problem is to create a new batch file and use it from which the actual CGI
executable is called. For details please see the following document :
Note 116754.1 "After applying OAS 4.0.8.2 CGI and Cartridge cannot communicate
to report server"
7) A case specific to WEBDB version 2.1.0.9.3 :
Another known case for this error is with WEBDB version 2.1.0.9.3 or less.
If you are using these old versions of WEBDB as HTTP listener, please have a
look at the following document :
Note 95426.1 "URL Not Found When Calling Oracle Developer Report from WebDB Site"

On Windows you can create a Report Services:
rwserver -install server=repserverYou have to choose different names for all servers, like your collegue cannot create a server with the same name. You can start/stop this Report server in Services (control panel). Configuration files can be found under $ORACLE_HOME/reports/conf
Martin

XI 3.0 Installation Problem: no central managment server running

Hi, I am totally new to BO our company just purchased the application and I have installed XI 3.0 on one of our server. I have setup the DB and the installation finished successfully. However I can't find CMS anywhere on the server. It seems like all the other XI 3.0 components are there Business view manager, central configuration manager, etc. they are all in the program list.
The only thing I didn't install is Tomcat. In Central configuration Manager ther Server Intelligence Agent is running. When I try to connect to the server in Business view Manager I receive the following error "The system servername cannot be contacted, but there is no Central Managment Server running at port 6400."
During the installation for "Web Application Server" part I checked the "other" option since I want to use IIS. I have a feeling I need to do some type of post configuration for IIS? Where do I perform this?
Our setup is:
Window Server 2003 SP2 with all the latest window updates
The latest XI 3.0 (I downloaded it from the product page)
My questions are:
1. Does XI work with IIS at all?
2. Do I need to install Tomcat and run some kind of connector to have IIS work?
3. What am I missing for my XI 3.0 it seem the core component is missing (CS)?
Edited by: Amy Williams on Sep 24, 2008 11:18 AM
Moved from Xcelsius forum to BOE Administration

Hi Allan,
In answer to your questions - XI 3.0 does not have an IIS interface right now. You will need to install a java application components in order to access the end user interface for viewing reports (InfoView), the report viewers, the web services and SDKs and the management console (CMC). The easiest way to do this is to choose the default Tomcat components in the installation and work from there.
If you left everything else as default, then you will have all the necessary application components installed to get the system up and running. It may just be that your CMS has not started for some reason. Try stopping and restarting the Server Intelligence Agent (SIA) in the Central Config Manager (CCM) - found in the Start/Programs/Business Objects group.
Once started, try clicking on the "Manage Servers" icon of the CCM (the one with a server and a check mark on it). This should allow you connect to the system and see which servers have started. IF you cannot connect, the next step would be to check the windows Event Log. See if the CMS service started OK. If it didn't the log should provide you with more information, which you can post here for further assistance.
If it did, and you still cannot connect, you may need to review your network firewall settings and/or your DEP status (see the properties panel for My Computer, choose the Advanced tab, select the Performance settings button, then the Data Execution Prevention tab).
Happy hunting.
Derek.

The attempt to connect to the server (IP address) on port 443 failed - OLT

Hi all
I am facing one problem, if i run load to any application for 100 users for 1 iteration then it is not showing any error. Lets say i ran the load of 100 users for one hour then for some users there are errors like
Line: (script.java:84)][ScriptException]: The attempt to connect to the server (IP address) on port 443 failed.
And my understanding is the user's which are facing failures is not able to get response or page loaded at their end. As failures are occuring for some particular steps not the entire scenario. Pls confirm.
Thanks

I believe that's an indication that there is an error receiving mail, but if you have any drafts or email in your outgoing mailbox, try deleting them. Apple's troubleshooting steps for this are (from http://support.apple.com/kb/TS4002):
Cannot receive mail in OS X Mail
If you use OS X Mail, look at the name of your iCloud account on the left side of the main Mail window. If your iCloud account name is dim and has a lightning bolt next to it, your account is offline. To resolve this, make sure your computer is connected to the Internet. Then choose Go Online from the Mailbox menu.
If taking your iCloud account online doesn't resolve the issue, follow these steps:
From the Mail menu, choose Preferences.
In the Preferences window, click the Accounts tab if it is not already selected.
In the Accounts list, select your iCloud email address.
Click the Account Information tab.
Verify your SMTP server settings with the following information:
Incoming Mail Server: imap.mail.me.com
User Name: Your iCloud email address
Password: Your iCloud password
Click the Advanced tab and verify the following additional settings:
Port: 993
Use Secure Sockets Layer (SSL): Should be enabled
Authentication: Password

Which ports do I open so QT Broadcast is seen from outside a local network?

I need some help with proper port settings using QT Broadcaster Version 1.5 (113) from mac to mac (running X.4.5 on all systems). I am able to send a Live QT Broadcast to my local network no problem but the broadcast is not seen from outside of my own local Network.
I’m assuming I must first address port settings on my cable modem and / or a Belkin gateway 4 port router.
The Broadcast works fine on all 4 of my macs connected via ethernet to a Belkin 4 port router which in turn is connected to a Toshiba PCX2500 cable modem.
I’m guessing the Toshiba modem is the problem and not the Belkin router. I say this because when I remove the router completely my Broadcast is still not seen by anyone from the outside. This leads me to believe that the cable modem may be the culprit. But then again I’m at a loss to know which ports to open up so others on the internet can also view my broadcast. Please note I do not wish to broadcast to more than one person at a time. Hence no need for QTSS or DSS.
To the best of my knowledge QT Broadcaster in itself should suffice from one mac to another w/o the need for a server. Is this correct? If not, I do have Darwin loaded to another separate mac system in the event I must first use it to reflect this braodcast.
Any help would be sincerely appreciated & please pardon my second post on the same subject / QT Broadcaster which I have slighly reworded in hope of getting some help.
SDMacuser

ok .... i just pinged www.gamesspy.com and i set it at 30 instead of the default 10 and here are my results:
Ping has started ...
PING www.gamespy.com (216.35.19.179): 56 data bytes
64 bytes from 216.35.19.179: icmp_seq=0 ttl=241 time=34.822 ms
64 bytes from 216.35.19.179: icmp_seq=1 ttl=241 time=41.560 ms
64 bytes from 216.35.19.179: icmp_seq=2 ttl=241 time=35.346 ms
64 bytes from 216.35.19.179: icmp_seq=3 ttl=241 time=29.110 ms
64 bytes from 216.35.19.179: icmp_seq=4 ttl=241 time=32.620 ms
64 bytes from 216.35.19.179: icmp_seq=5 ttl=241 time=30.933 ms
64 bytes from 216.35.19.179: icmp_seq=6 ttl=241 time=28.824 ms
64 bytes from 216.35.19.179: icmp_seq=7 ttl=241 time=28.016 ms
64 bytes from 216.35.19.179: icmp_seq=8 ttl=241 time=28.968 ms
64 bytes from 216.35.19.179: icmp_seq=9 ttl=241 time=36.142 ms
64 bytes from 216.35.19.179: icmp_seq=10 ttl=241 time=26.944 ms
64 bytes from 216.35.19.179: icmp_seq=11 ttl=241 time=28.078 ms
64 bytes from 216.35.19.179: icmp_seq=12 ttl=241 time=27.286 ms
64 bytes from 216.35.19.179: icmp_seq=13 ttl=241 time=25.052 ms
64 bytes from 216.35.19.179: icmp_seq=14 ttl=241 time=25.918 ms
64 bytes from 216.35.19.179: icmp_seq=15 ttl=241 time=32.702 ms
64 bytes from 216.35.19.179: icmp_seq=16 ttl=241 time=37.229 ms
64 bytes from 216.35.19.179: icmp_seq=17 ttl=241 time=35.537 ms
64 bytes from 216.35.19.179: icmp_seq=18 ttl=241 time=29.943 ms
64 bytes from 216.35.19.179: icmp_seq=19 ttl=241 time=31.380 ms
64 bytes from 216.35.19.179: icmp_seq=20 ttl=241 time=26.326 ms
64 bytes from 216.35.19.179: icmp_seq=21 ttl=241 time=25.403 ms
64 bytes from 216.35.19.179: icmp_seq=22 ttl=241 time=26.719 ms
64 bytes from 216.35.19.179: icmp_seq=23 ttl=241 time=29.488 ms
64 bytes from 216.35.19.179: icmp_seq=24 ttl=241 time=29.223 ms
64 bytes from 216.35.19.179: icmp_seq=25 ttl=241 time=35.644 ms
64 bytes from 216.35.19.179: icmp_seq=26 ttl=241 time=33.442 ms
64 bytes from 216.35.19.179: icmp_seq=27 ttl=241 time=29.424 ms
64 bytes from 216.35.19.179: icmp_seq=28 ttl=241 time=30.499 ms
64 bytes from 216.35.19.179: icmp_seq=29 ttl=241 time=25.632 ms
--- www.gamespy.com ping statistics ---
30 packets transmitted, 30 packets received, 0% packet loss
round-trip min/avg/max/stddev = 25.052/30.607/41.560/4.043 ms

Which ports does Webi Rich CLient use to connect to Universe etc..

Hello together,
we have the problem that we cannot run Rich Client from computers outside our network - so which ports does webi Rich Client use to connect to BO Serverl?.
It will always say universe not found. Login to rich client and everything else is possible.
It's not an authorisations problem, inside the network people can run the programs fine.
Thank you

Hi,
i assume you have enable CMS port on the firewall, apart from this you need to enable IFRS and Connection Server port also.
Regards,
Ramu.
Edited by: Gowda Timma Ramu on Oct 14, 2010 4:06 PM

Registry Server run on which port?

Similar Messages

Maybe you are looking for