Rehashing the Wi-fi/Data Conundrum
I got my Kin ONEm three days ago, as a free upgrade from my enV3. I was attracted to it because of the Wi-Fi capabilities sans data plan. My sister got the Kin TWOm for her upgrade.
When I got the phone, I had some trouble connecting to my home network, but after a few attempts (right next to the modem, if that makes any difference), it finally accepted my network key and I could browse the internet. (We also had trouble connecting my sister's TWOm to our network, but several attempts got that to work too... finally.)
I was happy for... a day and a half? I realized that I was incurring data charges (which is my fault, I understand, but for what, I'm not sure), so I changed the service blocks online (thanks to this forum for telling giving me the how and why to do that).
This was last night. I blocked all 3G data to avoid the charges for both my Kin ONEm and my sister's TWOm.
Now, my phone will not access the internet. It tells me I am connected to my home network, yet with every page I try to access, I get that "Cannot connect to server" message, and the "Page cannot be displayed" crap.
So I called a Verizon rep. He confirmed that blocking 3G data does not affect the Wi-Fi, just like it has been confirmed on this forum. He gave me the manufacturer's customer support number. I found that pretty hard to navigate, since there is no menu option for talking to someone regarding mobile phones, much less the Kin. So I emailed them.
I just a reply from a Sharp representative, and they told me to talk to Verizon. Awesome.
I am aware that there is a chance that I got a faulty phone, even though that seems a little drastic. But how is it that now my sister's TWOm won't access the internet via our home network? (Just this morning, it was browsing the web just fine.) Has anyone else with the Kin ONEm/TWOm experienced internet access problems after blocking the 3G data (even though it shouldn't affect it at all)? Or is this just a freak tech issue?
When you are using a wifi connection, you are not using any data on the Verizon Wireless network.
So, short answer........ "Yes"
Similar Messages
-
Help needed in getting the previous Quarter Data
Hello folks,
I have this procedure where i have to modify the current procedure in the following manner:
I need to get rid of the variables p_start and p_end so that i cannot see them in the crystal report and include the Frequency in the procedure to get the Data based on the Dates.
and Main requirement is" If the Frequency is Quarterly " it should get the previous quarter Data, if "Frequency is monthly" it should return the previous month data.Can anyone please let me know where shud i make changes. Am including the procedure for refernce. Any help is appreciated
Thanks a millioin,
CREATE OR REPLACE PROCEDURE hcsc_recovery_report_h(report_record in out cr_return_types.gen_cursor,
p_start string,
p_end string)
IS
v_startdate date;
v_enddate date;
BEGIN
v_startdate := to_date(p_start, 'YYYY/MM');
v_enddate := last_day(to_date(p_end, 'YYYY/MM'));
open report_record for
select --distinct r.recovery_id
r.event_id,
r.event_case_id,
c.client_id,
c.client_code,
c.client_name,
b.branch_group_code,
b.branch_group_description,
g.employer_group_code,
g.employer_group_name,
e.client_policy_identifier,
e.date_of_incident,
e.event_type_code,
sum(nvl(r.amount, 0)) as amt_received,
nvl(sum(case
when r.amount >= 0 then
rd.fees
else
rd.fees * (-1)
end),
0) as fees,
ec.close_date, *001* commented
(case
when ec.close_date <= to_date(to_char(v_enddate, 'MMDDRRRR') || '235959',
'MMDDRRRR HH24MISS') then
ec.close_date
else
null
end) as close_date, --*001* added
get_case_value(ec.event_id, ec.event_case_id, v_enddate) as case_value,
nvl(etl.fee_percent_flag, 'N') workmans_comp,
max(to_char(r.recovery_date, 'FMMonthYYYY')) Year_Month,
max(to_char(r.recovery_date, 'YYYYMM')) Y_M,
max(to_date(to_char(r.recovery_date, 'MMYYYY'), 'MM/YYYY')) date_MY
from recovery r,
recovery_detail rd,
event e,
client c,
branch_group b,
employer_group g,
event_case ec,
event_type_lookup etl
where r.event_id = e.event_id
and r.event_case_id = ec.event_case_id
and ec.event_id = e.event_id
and rd.recovery_id(+) = r.recovery_id
and r.recovery_date between v_startdate and
to_date(to_char(v_enddate, 'MMDDRRRR') || '235959',
'MMDDRRRR HH24MISS')
and e.client_id = c.client_id
and g.client_id = c.client_id
and b.client_id = c.client_id
and g.employer_group_id(+) = e.employer_group_id
and b.branch_group_id(+) = g.branch_group_id
and e.event_type_code = etl.event_type_code -- SST 130852 04/14/09
group by r.event_id,
r.event_case_id,
c.client_id,
c.client_code,
c.client_name,
b.branch_group_code,
b.branch_group_description,
g.employer_group_code,
g.employer_group_name,
e.client_policy_identifier,
e.date_of_incident,
e.event_type_code,
ec.close_date,
get_case_value(ec.event_id, ec.event_case_id, v_enddate),
nvl(etl.fee_percent_flag, 'N')
having sum(nvl(r.amount, 0)) <> 0
order by c.client_code,
b.branch_group_code,
g.employer_group_code,
r.event_case_id;
Edited by: user11961230 on Oct 20, 2009 9:02 AMuser11961230 wrote:
1. I want to get rid of the p_start and p_end. So how do i declare the v_startdate and v_enddate in the following part?
v_startdate := to_date(p_start, 'YYYY/MM');
v_enddate := last_day(to_date(p_end, 'YYYY/MM'));I'm not sure what you mean by "declare".
In PL/SQL, "declare" means state (at the beginning of a block) that there will be a certain variable with a certain name (such as v_startdate) and datatype (such as DATE). You're already declaring the variables v_startdate and v_enddate correctly, right before the BEGIN statement.
Declaring a variable is not the same as initializing it, that is, giving it a value for the first time. Your next question seems to be about initializing..
2. where exactly shud i include the logic that u have mentioned. sorry a dumb questionIn place of the two assignment statments that reference p_start and p_end.
3. This time am gonna use frequency instead of report_type so that i will get rid of the p_start and p_end from the procedure.Do you mean you want to pass an argument (called frequency) that tells if you want a quarterly or a mionthly report, just like the variable report_type in my example?
If so, replace report_type in my example with frequency.
I think you want something like this:
CREATE OR REPLACE PROCEDURE hcsc_recovery_report_h
( report_record in out cr_return_types.gen_cursor
, frequency IN VARCHAR2
IS
-- Declare local variables:
v_startdate date;
v_enddate date;
BEGIN
-- Initialize v_startdate and v_enddate, depending on frequency
IF frequency = 'QUARTERLY'
THEN
v_startdate := TRUNC ( ADD_MONTHS (SYSDATE, -3)
, 'Q'
v_enddate := TRUNC (SYSDATE, 'Q');
ELSIF frequency = 'MONTHLY'
THEN
v_startdate := TRUNC ( ADD_MONTHS (SYSDATE, -1)
, 'MM'
v_enddate := TRUNC (SYSDATE, 'MM');
END IF;
-- Subtract one second from v_enddate
v_enddate := v_enddate - ( 1
/ (24 * 60 * 60)
open report_record for
select --distinct r.recovery_id
r.event_id,
and r.recovery_date BETWEEN v_startdate
AND v_enddate
...When you post formatted text on this site (and code should always be formatted), type these 6 characters:
(small letters only, inside curly brackets) before and after sections of formatted text, to preserve spacing.
Edited by: Frank Kulash on Oct 20, 2009 2:37 PM
Changed query to use BETWEEN -
I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.
Hello. Most of the engineers in developer exchange are more familiar
with NI products. Contacting ICS for technical support is a better
course of action. -
In new iPad 4g, when sim card is not inserted, I can not find the enable 4g tap in the setting-cellular data tap, can some one please tell me if this is normal and if so, then when it appears, thanks
If the SIM is out of your phone, find my phone needs a data connection, so could use wifi - IF in range of a wifi and one that it can join (ie. a known network or one that is wholly open so no login required). Your phone could also simple be turned off, so not findable, or it may have been restored (plugged into iTunes and restored as new) again, making it permanently unfindable. Honestly, for someone stealing an iPhone, this is likely the first thing they do - restore as new and it is theirs forever.
Find my iPhone is tied to the users iCloud account - the find function is part of the iCloud account's services and it communicates with the iCloud servers over a data connection - either wifi or 3G.
Have you set up your iCloud account on your replacement phone, and is it working properly on that phone? -
What deterimes the amount of data in a waveform from a TDS 1012 scope
Hello,
What determines the amount of data that is in a waveform that comes out of a TDS 1012 scope? I am assuming that I will have to look at the driver vi to determine the commands sent to the scope to figure it out. I am in a situation that I need to have the y axis to have a high resolution, that results in very little data being collected from the scope.
Regards,
Kaspar
Regards,
KasparHello,
The amount of data that comes out of the TDS 1012 scope is determined by the data start (DATaTARt) and data stop (DATaTOP) commands that are defined on page 58 (2-38) in the 346 page programming manual for the scope. I found of that the data start was not set to 1, which is the beginning of the data.
I also had a very low level signal on channel that was all most unreadable by the scope that caused me to think that I was not getting all of the data.
Regards,
Kaspar
Regards,
Kaspar -
Refresh the Business Graphics Data on click of next page event of a table
Hi Experts,
We are using Business Graphics UI element in Web dynpro Java to display a table data.
We are limiting the graphics data to 12 table entries at a time.
Now, I just want to know how can we refresh the Business Graphics data when the user clicks on the Next Page option at the bottom of the table.
This is applicable if we have more than 12 table entries and we've restricted the visible row count to 12.
So, for more than 12 entries; when the user selects the next page, I want the next set of data to be displayed in the Business Graphics UI element.
But I am not able to get the action for the Next Page event.
Please note that we are on Netweaver 7.01.
Kindly suggest as how can we achieve this functionality.
Kind Regards,
Anuragcheck this
Web Dynpro Java Table Paging Unleashed: Optimizing Heavy Table Performance -
How to filter the list of data
I am using af:inputComboboxListOfValues to display drop down list of data. The list is binded to a LOV.
I have a requirement that if the value is used in other place, I should not get it listed on the drop down list. I research doc that it let me use "launchPopupListener" to filter the list of data. As a test code, I coded like this:
public void launchListener(LaunchPopupEvent launchPopupEvent) {
// Add event code here...
DCBindingContainer bindings =
(DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding dcItteratorBindings =
bindings.findIteratorBinding("PersonVO1Iterator");
dcItteratorBindings.getViewObject().setWhereClause("PersonEO.FIRST_NAME <> 'John'");
dcItteratorBindings.getViewObject().executeQuery();
But it does not work. It seems that 'John' is removed from VO but doesn't removed from UI combo box drop down list.
What can I do to fix it?
JDev Version 11.1.1.6.0
Thanks.
帖子经 954727编辑过Morris Li,
Welcome to the ADF Forum. Have you looked into whether the PartialTriggers for the ui combo box have been set.
This article may also assist: "Building model driven dependent list with Oracle ADF BC"
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/march2011-otn-harvest-351896.pdf
and this http://docs.oracle.com/cd/E16764_01/web.1111/b31973/af_ppr.htm#BGBIIDBF
Stuart -
The device, an Ocean Optics spectrometer in columns of about 9000 cells.I'm saving this as a lvm file using the "write to measurement file.vi". But it doesn't give me the flexibility as far as I can tell.
I need to move the column by the index of the for loop, so that when i = n, the data will take up the n+1 column. (the 1st column is used for wavelength). How do I use the "write to spreadsheet file.vi" to do this? Also, if I use the "write to spreadsheet file.vi", is there a way one can increment the file name, so that the data isn't written over. I like what "write to measurement file.vi" does.
I'd really appreciate any help someone can give me. I'm a novice at this, so the greater the detail, the better. Thanks!!!You cannot write one column at a time to a spreadsheet file, because a file is arranged linearly and adding a column would need to move (=read and rewwrite elsewhere) almost all existing elements to interlace the new data. You can only append new rows without having to touch the already written data.
Fields typically don't have fixed width. An exception would be binary files that are pre-allocated at the final size. In this case you can write columns by setting the file positions for each element. It still will be very inefficient.
What you could do is append rows until all data is written, the read, transpose, and write back the final file.
What you also could to is build the final array in a shift register and write the entire things to file at once after all data is present.
LabVIEW Champion . Do more with less code and in less time . -
The fixed value date is empty and not displayed in the VA05 report
Hi SD Gurus,
With in the Sales Order in the line item level in the billing tab we have the fixed value date (VBKD - VALDT) were entered.
But when we try to execute the report VA05 were the fixed value date column shows empty (i.e without the date it shows the blank). Can you any one help me with regard.
We would like to fix this problem.
Thanks in advance for providing solution to this query.
Thanks and Regards,
SAP-SD groupHi janarthanam,
Ok.
Goto t-code SQVI,SAP Quickviewer.
Give a name to your query and enter description ,etc.
Next enter the table from which you want to fetch data,ie,VBKD .
Select "Layout mode" for displaying data on the SAP screen or "Basis mode " if you want to extract the data to a word doc,excelsheet or a flat file.
Next you can select the fields you want to display into your report,their position and ascending/descending order,Here make sure u select
the field u need to display ie. the fixed value date ( VALDT) .
also select the fields u wish to have in the selection criteria.
Enter these required information and u would get a report on the SAP screen or in your desired format.
Hope it will suffice you.
For any queries ,your are welcomed.
Thanks,
Umesh. -
Rowcount is zero , but the table displays data on the screen
Hi,
I have created an arraylist, which holds objects of a custom class. The custom class contains variables, that holds the data of each row.
I did binding between this arraylist and a table. On the UI, the table is displayed with the data present in the class variables.
But, when I use getrowCount(), it returns zero.
Probably because of this reason, the selected row data is null. (tableselectone component).
Any help is appreciated./**** PatientsHelper Class
private String firstName;
private String lastName;
private String patientId;
private String firstNameCol;
private String lastNameCol;
private String patientIdCol;
private String empType;
private String empTypeCol;
public void setFirstName(String firstName) {
this.firstName = firstName;
public String getFirstName() {
return firstName;
public void setLastName(String lastName) {
this.lastName = lastName;
public String getLastName() {
return lastName;
public void setPatientId(String patientId) {
this.patientId = patientId;
public String getPatientId() {
return patientId;
public void setFirstNameCol(String firstNameCol) {
this.firstNameCol = firstNameCol;
public String getFirstNameCol() {
return firstNameCol;
public void setLastNameCol(String lastNameCol) {
this.lastNameCol = lastNameCol;
public String getLastNameCol() {
return lastNameCol;
public void setPatientIdCol(String patientIdCol) {
this.patientIdCol = patientIdCol;
public String getPatientIdCol() {
return patientIdCol;
public void setEmpType(String empType) {
this.empType = empType;
public String getEmpType() {
return empType;
public void setEmpTypeCol(String empTypeCol) {
this.empTypeCol = empTypeCol;
public String getEmpTypeCol() {
return empTypeCol;
/***ColumnNames are also dynamically generated and are stored in columnNames (PatientHelper type) object**********/
PatientsHelper columnNames = new PatientsHelper();
columnNames.setFirstNameCol("First Name");
columnNames.setLastNameCol("Last Name");
/**********Code where the patientsHelper objects are kept in the arraylist **************/
ArrayList PatientRecords = new ArrayList();
private PatientsHelper patientAttributes;
for(int i=0;i<10;i++){
patientAttributes = new PatientsHelper();
patientAttributes.setFirstName("abcd");
patientAttributes.setLastName("efgh");
patientRecords.add(patientAttributes);
/*******ADF binding code ******************/
<af:table emptyText="No items were found"
value="#{backing_RegisterPatient.patientRecords}"
var="row" rows="25"
banding="row"
bandingInterval="1"
binding="#{backing_RegisterPatient.table2}"
id="table2"
rendered="true">
<af:column sortable="false"
headerText="#{backing_RegisterPatient.columnNames.patientIdCol}"
formatType="text"
binding="#{backing_RegisterPatient.column2}"
id="column2">
<af:outputText value="#{row.patientId}"
binding="#{backing_RegisterPatient.outputText2}"
id="outputText2"/>
</af:column>
<af:column sortable="false"
headerText="#{backing_RegisterPatient.columnNames.empTypeCol}"
formatType="text"
binding="#{backing_RegisterPatient.column3}"
id="column3">
<af:outputText value="#{row.empType}"
binding="#{backing_RegisterPatient.outputText3}"
id="outputText3"/>
</af:column>
<af:column sortable="false"
headerText="#{backing_RegisterPatient.columnNames.firstNameCol}"
formatType="text"
binding="#{backing_RegisterPatient.column4}"
id="column4">
<af:outputText value="#{row.firstName}"
binding="#{backing_RegisterPatient.outputText4}"
id="outputText4"/>
</af:column>
<af:column sortable="false"
headerText="#{backing_RegisterPatient.columnNames.lastNameCol}"
formatType="text"
binding="#{backing_RegisterPatient.column5}"
id="column5">
<af:outputText value="#{row.lastName}"
binding="#{backing_RegisterPatient.outputText5}"
id="outputText5"/>
</af:column>
<f:facet name="selection">
<af:tableSelectOne
binding="#{backing_RegisterPatient.tableSelectOne1}"
id="tableSelectOne1"
autoSubmit="false">
<af:commandButton text="View Documents"
binding="#{backing_RegisterPatient.viewDocsButton}"
id="viewDocsButton"
action="#{backing_RegisterPatient.viewDocuments}"/>
</af:tableSelectOne>
</f:facet>
</af:table> -
Crystal Reports XI String [255] limit with the File System Data driver...
I was trying to create a Crystal Reports XI report to return security permissions of files and folders. I have been able to successfully connect and return data using the File System Data driver as the Data Source; however the String limit on the ACL NT Security Field is 255 characters. The full string of data to be returned can be much longer than the 255 limit and I cannot find how to manipulate that parameter.
I am currently on Crystals XI and Crystal XI R2 and have applied the latest service packs but still see the issue. My Crystal Reports Database DLL for File System data ( crdb_FileSystem.dll ) is at Product Version 11.5.10.1263.
Is it possible to change string limits when using the File System Data driver as the Data Source? If so, how can that be accomplished. If not, is there another method to retrieve information with the Windows File System Data being the Data Source? Meaning, could I reach my end game objective of reporting on the Windows ACL's with Crystal through another method?Hello,
This is a known issue. Early versions you could not create folder structures longer than 255 characters. With the updates to the various OS's this is now possible but CR did not allocate the same space required.
It's been tracked as an enhancement - ADAPT01174519 but set for a future release.
There are likely other ways of getting the info and then putting it into an Excel file format and using that as the data source.
I did a Google search and found this option: http://www.tomshardware.com/forum/16772-45-display-explorer-folders-tree-structure-export-excel
There are tools out there to do this kind of thing....
Thank you
Don
Note the reference to msls.exe appears to be a trojan: http://www.greatis.com/appdata/d/m/msls.exe.htm so don't install it.
Edited by: Don Williams on Mar 19, 2010 8:45 AM -
Problems with the O2 blackberry data package on my Curve 3G.
I have already informed O2 about this but they claim that I should be used the blackberry support services, but nothing there helps me!
I got my Blackberry Curve 3G on September 9th this year and I put on the Blackberry Data Package bolt-on onto my phone on September 16th. I then received a text to say they've taken £5 from my credit and it will be up and running in the next 24 hours. Its now September 19th and my BBM is not working at all and I am extremely upset with the services and behaviour I have received from both O2 and Blackberry.
Is there any way you can help? If this fails, I shall be forced to go back to the shop from where I got my Blackberry from and ask for their help.
Many thanks, Jade.Can a bubble whistle Problems with the O2 blackberry data package on my Curve 3G.? The seat matures in your oar. The lad ices the pursuing method inside a resident. A judge spins against the vendor! The rose wows the hello.
filipina heart -
How to convert the numeric to date format
HI ,
We have created the date KF and selected the data type as DEC-numeric or counter and add in the cube.
the data for this fields in the cube are in numerics like 734.504, but when we execute the report it is converted in to date format dd.mm.yyyy.
My issue how this conversion is working in the backend while executing the report.
Regards.
venkataConversion is happening because of the type you had selected for the KF while creating it.
Check the type of the Key figure?
While creating the KF you might have selected the Type as Date and Data type -DEC : Counter or amount field with comma and sign.
that's the reason why you are getting the output values displayed in dd.mm.yyyy format.
For amount field - create a KF with type "AMOUNT" and unit -0currency or specify the currency of that region.
regards
KP -
Help reqd on Changing the Valid from "date" for both BOM & Routing
Hi all...
Pls advise me how to do the changing of Valid from "date"....
Is there any process in CC01 or ECM???....
pls reply me in detail step format (step by step analysis)....
I wrongly created in CS01 and CA01 as 05.10.2007 as my valid from date instead of 01.10.2007.....
How to change to my actual one......
I dont know how to change it exactly.....as im beginner in SAP...pls take this into consideration...and post ur replies imm.
Pls reply me in detail....will be rewarded at the end while closing this issue.
thanks & regards
sankarDear Sankarbabu,
IF there's no setting for Date Check in OS54 - Engineering Change Management
Control Data,then you can create a change number with past dates,and also to
use the same one for changing BOM.
Tell me one thing you are saying you want to use ECM.Was the earlier one
created without BOM was created without an ECN?
See already if you have created your BOM with an ECN,then remove the date
check setting which I have mentioned in OS54.
Now goto T code CC02 ,enter the Change number and give the valid from date as
01.10.2007.
After that check in CS03 whether this date(01.10.2007)is getting reflected or not.
I'm sure this will solve your problem.
Regards
Mangal -
My Apple ID was changed. It works fine on my IPad mini, my MAc and in Itunes Store, Yet when I try to update apps on my IPAD 1 I am asked to enter a password for the old ID user name which appears in the pop up window. When It still askes for the wrong ID data. I have uodated it in settings, and I have logged ontht the account to verify that it still works properly and it does. I reboot the IPAD and then attempt to update apps again but it still asked for the Old ID password and still shows the old ID username. The dame thing refuses to recognize my new Apple ID data. This is making my older IPAD unuseable.
You cannot change your Apple ID. You can get a new one if you want, but all of your Apps and media are linked to yoru old Apple ID. And no, Apple won't transfer your old ID purchases to yoru new ID.
Maybe you are looking for
-
When I try to set up MS Outlook using Outlook Setup for Icloud it fails at step 2 of 7 Download Calender from iCloud with error message "your setup could not be started because of an unexpected error" My iCloud calender in Outlook had previously be
-
Java.security.AccessControlException: access denied
Hi all While deploying my portal application lots of following exceptions are thrown. Please guide me how I can solve this issue <Aug 16, 2007 12:27:43 PM PKT> <Warning> <Management> <BEA-400409> <Exception fr om ApplicationFilePoller while checking
-
How can we create technical systems for WEB as JAVA and ABAP
-
-Dfile.path -Djava.endorsed.dirs
Hi, I am running a jar file from the command line in Windows. java -Dfile.path=C:\sandbox -Djava.endorsed.dirs=..\ -cp ..\xml-apis.jar; ..... What does -Dfile.path and -Djava.endorsed.dirs do? I ask because I want to run the run the jar from the embe
-
Hi I have succesfully linked 2 HH3Bs via Ethernet. The main one connected to Infinity is upstairs providing wired Ethernet connection and the wireless on and subscribed to FON. However most of my wireless needs are downstairs where I have linked them