Related item with calculated quantity

Hello,
I have requirement like this in 11.5.10.2.
1. I have sales order with item "A" quantity 10.
2. I choose related item "B" with default quantity 1.
This is easy.
I want put my own quantity instead 1. I can change this quantity manually but I want make own calculation and I want fill in quantity by system.
What kind of setup/customization I have to make? Has somebody had requirement like this?
Regards,
Luko

Luko,
I think the standard functionality is always going to give you a quantity of 1 as default.
Have you tried using a personalization on the LINE object, WHEN-VALIDATE-RECORD event, with a condition statement restricting the trigger to the item relationship type(s) you're using?
If your requirement is as simple as always setting the related item quantity to be the same as the ordered item quantity then you should be able to take care of that within the perso. If you have variable qty relationships, you'd have to look at storing those in the Item Relationships DFF and referencing that setup from your perso to get the correct calculated qty value to set.
Regards,
Jon

Similar Messages

  • PO Line Item with Open Quantity

    HI all,
    How should i select a PO line item with Open Quantity? Is it possible to post GR for a PO which is set for Delivery Complition but still has Open Quantity ..
    please help me how to check for OPEN QUANTITY.
    Thanks,
    Ravi.

    Hi all,
    Thanks for your answer, but can you be some more specific on what calculations need to be done.
    I need to Post a GR for all PO where PO line items have Open Quantity.
    Thanks
    ravi.

  • Unable to delete line item with 0 quantity in Invoice.

    Hi Experts,
    I came across a Invoice which reflects in VF04 as pending Billing due list. When i checked at the inter company Invoice i came across a line item with "0" quantity and price as zero, interestingly the replinishment cross company delivery document  for the same line item for "0" quantity had a Batch assigned to it.
    Now the issue is cusotmer has selected the line item with XX quantity and have selected the accounting document to be generated but the line item with "0 was left over and now still reflects in VF04.
    Customer does not want to reverse the full cycle to resolve the issue since the document was created a year back.My Question  is can we get the line item with "0" quantity to clear accounting so that it will not reflect in VF04.If so what will be process to do that.
    Thanks in Advance to advice.
    Regards,
    Sridhar.R

    Hi,
    It is  not possible to delete this line item, you can discuss with your client and delete it from the table.
    And now coming to the reasons why it has come into the invoice & Delivery
    1. The Batch Item category must have been configured as relevant for billing...check this and make it irrelevant if the client does not do batch specific billing. --- This will stop the batches from coming into the invoice.
    2.  Check for the batch item category in delivery if Zero quanity is allowed...if it is allowed make it not allowed and make it an Error message, whenever there is a zero quantity system will give a message.

  • Item with zero quantity.

    Hi ,
    I need a SQL query which returns all the items with zero quantity.
    In mtl_system_items_b am not finding any quantity column.
    I have written a query.will you please let me know whether it works or not.
    select b.segment1,0
    from
    inv.mtl_system_items_b b
    minus
    SELECT b.segment1,m.TOTAL_QOH
    FROM APPS.MTL_ONHAND_ITEMS_V m,
    inv.mtl_system_items_b b
    where b.inventory_item_id=m.inventory_item_id
    and nvl(m.TOTAL_QOH,0) >0
    Thank you.
    Regards,
    Neeraja.I

    Hi,
    try with this query,
    select
    msi.INVENTORY_ITEM_ID
    , msi.DESCRIPTION
    from
    MTL_SYSTEM_ITEMS_B mis
    , MTL_ONHAND_QUANTITIES moq
    where mis.INVENTORY_ITEM_ID =moq.INVENTORY_ITEM_ID
    and moq.TRANSACTION_QUANTITY <>0
    --Basava.S                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Excisable items with zero Quantity

    Hi,
    Posting Invoice for Non-Excisable item with zero Quantity is allowed, How to get the same with the Excisable Item ?
    Thanks And Regards
    Vivek

    Hi Jimmy,
    Thanks for ur response,
    I m working on SAP B1 PL34 and also checked in PL05, Is there any way to achieve that facility in Invoice Document?
    And if u find any notes for it then plz give me the link.
    Thanks and Regards,
    Vivek

  • Delete proposed items with billed quantity 0 in VF01

    Hi,
    We need to delete from the proposed items to invoice the items with billed quantity 0. The lines with this quantity = 0 have not to be showed so we need to delete the items just when the items are proposed. Do you know any way to do that? The user exits we have found, like userexit_fill_vbrk_vbrp, are not usefull because are executed before the append is done to the table XVBRP.
    Thank you,
    Manel

    This should be done in COPY CONTROL. Please sit with your functional counterpart to identify which copy control routine is currently being used. Next, in VOFM, copy this routine to a new routine (new routine # should be between 601 to 900) and adjust your new routine per your requirements.
    Raj

  • How to show statistics of main item and related items with less filter?

    Hi experts,
    Have any of you come thro' similar requirements before?
    To show the statistics of a main item in different aspect in a document and show the comparison of this item in a particular aspect with other related items as inputted at prompt.
    You can image that, for the comparison, if I build another query for the related items, there will be duplicated dimensions, which we aim to avoid as duplicated dimension confuse end users.
    However, if i build the main items and related items in same query, for those reports of main item only, I need to add a report filter one by one!
    Any one of you have better idea?
    Thanks and Regards,
    Cherry

    You Should use Formatted Search in this case.
    You must create and associate a query for your field.
    click on the field you want items to be listed and press Shift + F2
    catch the keydown event of this field  and check pval.charpressed = 9 (tab key press)
    then execute
    SBO_Application.SendKeys("+")

  • Can not delete service entry sheet having Items with zero quantity

    Dear Experts ,
    I am having one service entry sheet with many line items out of which some line items are having quantity zero. Now when trying to delete the service entry sheet , system is asking to fill the quantity . since there are already some other service entry sheets through which full quantity equal to Purchase order quantity for that service line item has been already entered , the system is giving message "quantity exceeds"  if even quantity 0.01 is entered for namesake to allow delete of entire SES.
    The user had saved this service entry sheet & left it as it without acceptance for long time , it is required to be deleted as whole.
    Please advise how it can be deleted as system is not allowing it to delete & asks quantity to be filled NOW where  quantity had been entered zero while previously saving .
    Thanks in advance ,
    Regards,
    Anil Shanbhag

    Hi ,
    The SES has all line items with WBS elements , the idea to delete the SES is to free-up the budget which is commited due to creation of this SES.
    I have tried deleting individual line items in SES ,but system gives error "enter quantity" where line item quantity is zero. there are few such line items with quantity zero out of total 26 line items in the SES.
    I want to know whether Blocking of SES at header level will free-up the budget as it is the basis purpose for deleting SES , which i think may not serve the purpose.
    Kindly advise.  Thanks for your inputs.
    Warm Regards,
    Anil

  • Line with 0 quantity for main item with batch split

    Hello experts,
    I have one line item in delivery. Delivery split is there: There are 1 spilt items with 1 batch nos. The main item category and the batch split item category are TAN.
    My system is showing 2 line items in billing, the batch line with quantity and the main line with zero qty. How to prevent this and have only the lines item in invoice with batch/qty. I don´t want to see the main item with o quantity.
    In VTFL I have routine for copying requirements 004 and Billing Quantity B. I need to create another copying routine or I need to use another item category for batch lines?
    Thanks in advance
    Pablo

    Hi Pablo,
    It is advisable to have a different item category for Batch split items.
    If you want the batch split items to suppress and show only the Total in the Invoice. Yes it is possible.
    1) You can do this in the Copy controls in VTFL - Delivery to Billing, go to your Item category and go to Item details - Change the billing Qty to 'G'.
    2) Go to Shipping > Deliveries > Item categories Determination in Deliveries > Define item category.
    Go to your item category which is used in Batch Split
    Remove the Billing Revelance and make it blank and Save.
    Now when you create the Invoice for Batch split - Only the total quantity will be displayed without the subitems - like in Delivery note or Delivery..
    Please check and revert back for any more details
    Rgds
    Sunil.

  • Asset Creation in PR and PO and MIGO as a single Line item with "N" qty

    Hi All,
    In Purchase requestion ME51N
    Now we are creating "n" number of assets ( All are same item but "s.no" will vary) with "n" number of line item.
    Instead of this I have to enhance to create only one line item( For same item) with "n" quantity.
    for the ASSET account Assignment we have to create Asset(Temp no) for the each item/quantity(if the same item).
    as well as if they are going to create a PO with ref to PR they have to see all the "n" number of asset no.
    In MIGO creation for each asset we have to assign S.No and Asset Tag.
    How enhance the functionality in PR,PO and MIGO as well as in Invoice.
    Is it any User Exit/BADI is available for PR/POand MIGO to show all the "n" number of assets for a single line item.
    Kindly help me to give details to proceed further.
    Thanks in advance.
    sharma

    Hi Sharma,
    What i understand from your question is, you want to create a single line item in PR and PO. But the qty would be > 1.
    Each single qty would have its own asset number in account asssignment tab of item details of PR & PO.
    This is what you are expecting...Right???????????????
    Then this is possible with certain limitations.
    While creating PR, enter only one item with more qty.
    In item details section, in account assignment tab, on top left corner, there will be a button called Multiple account assignments.
    Click on it, then it looks like a table, where you can enter more than one line. (each line will have its own asset no)
    And choose option Distribute on qty basis for field Distribution.
    So that you can enter 1 qty for each line. ( Ex: if you created one line item in the item level with 10 qty, you need to maintain 10 line here, each qith 1 qty and diff asset no).
    The only limitation to this is, the GRN would be treated as non valueted. So when you make GRN there wwould not be any accounting doc. ( means no use of GR/IR clearing account as like normal for POs)
    when you prepare MIRO, all the assets will be capitalised and vendor credited.
    But in case if you receive partial invoice, then you have choose manually in MIRO. which asset is ot be capitalised.
    After entering the PO number in MIRO, there will be one line will be appeared with full qty. in the same line, move till the end of line, there you will have one button called Account assignments.
    Choose and go there, here you can choose which individual asset line to be considired.
    This will resolve your issue.
    Thanks,
    Srinu
    SRBORIGI_MULTIPLE ACCOUNT ASSIGNMENTS

  • Merge of two same items with different Qty in po

    Hi Experts,
    Is it possible to merge two Same items with different Quantity into 1.
    For Eg:- 2 similar  items  with qty 2 & 3 must show 5 qty appearing once.Is it possible through Transnotification what should be the query.
    Mona

    Hi Mona,
    If you want to display a Purchase Order on screen summarized by item, set the "Summary Type"  to "By Item" (by default it is "No Summary"). The PO lines will then be summarized by item with total quantity for each item.
    If you want to display it on the printout then you need to modify the PLD. It is quite easy actually. You can use the Repetitive Area Footer to display the summary of each item and set all fields in the Repetitive Area to be not visible and set the height to minimum height.
    Cheers,
    Marini

  • How to create web items with different quantities?

    Hi,
    I have B1 inventory items that are single items but we will be selling them on the web as 'packages' of different quantities.  For example, we would like the user to be able to select the web item, then be presented with a drop down (attribute) of case (10 items), 1/2 pallet (80 items) or full pallet (160 items).  Is it possible to setup a product line master which is a B1 inventory item, then define the child items, non B1 items, and somehow have the proper quantities ordered?  (ie. ordering 2 cases creates a B1 order for our parent item with a quantity of 20)
    If I can do this, I have another concern.  Since we are currently using our test database, if I setup all of these child items and create the parent/child relationships, will these be lost once we swtich the database over to our live/production database?
    Thanks,
    David

    Personally, I would add the javascript to the Item's description with additional drop downs there, upon selecting the drop down, this would populate the QTY field which i would hide via javascript as well, but will be passed on to the Cart/checkout page.
    There is a somewhat similar discussion here:
    [Re: Custom price logic|Re: Custom price logic]
    James

  • Items with  zero stock quantity show negative stock value in Stock reports

    When running Stock reports for controlling the stock value towards the GL accounts, some items appear with zero stock quantity, but the report still shows a stock value  (negative value in my case)
    How can this happen, and how can I correct this situation ?
    System parameters are :   negative stock is not allowed, Items with zero cost price not allowed. On item level average cost price method is used.
    P.K.Johnsen

    Hi Johnsen,
    I believe you have checked the" Manage Inventory by warehouse". I have noticed this issue in SAP B1 2005B but this is rectified in 2007B. The system behaves in this way as the system maintains item cost for the item for all warehouses and even if the stock is not present in the warehouse, the system would still show you a value for the same. Hope this helps. please search the forum. You'll find related threads.
    Thanks,
    Joseph

  • Sales order create/change line item with reference to contract - Open quantity not getting deducted for copied line item from the contract

    Hi friends,
    Please provide some valuable inputs for the following scenario:
    When a sales order line item is created(VA01) or changed(VA02) with reference to a Contract the open quantity is deducted in the contract which is a standard functionality. If the referenced line item is copied (custom enhancement to copy line item), then for the copied line item the open quantity is not getting deducted instead ATP quantity i.e. Available-to-promise is deducted.
    Any inputs on how we can fix this functionality i.e. deduct the open quantity from the contract for the copied line item?
    P.S. : Custom enhancement to copy line item is working fine, but open quantity is not getting deducted if the copied line item was referenced to a contract.
    Thanks,
    Sandeep
    Message was edited by: sandeep

    Sandeep,
    Yes, that was my original interpretation.  I was having a hard time believing that someone would ask such a question. 
    I guess, then, that you already know that you will have to add this logic to your enhancement. You should create your specifications and hand them off to a developer; ideally the one who created this enhanced solution in the first place.
    I do not provide advice in these forums about details of enhanced solutions.  Perhaps one of the other members will be more willing to do your work for you.
    Best Regards,
    DB49

  • Printout of Changed PO Line items with Quantity and value

    Hi SAP Gurus,
    I want to have the printout of  only those PO Line items with the change in Quantity and Value....
    How can i achieve this...
    Any config./ Developement...
    Plz. suggest....
    Rgds,
    Navin

    Hi,
    In config Purchasing->Messages->Output Control->Message Determination Schemas->Define Message Schema for PO, under 'Assign Schema to Purchase Order', if the 3rd indicator from the right 'New message determination process for change messages' is NOT selected, only changes are printed in the changed PO's.
    Are you using standard print program and SAPScript?
    Also under config Messages->Message Type->Define Message Type for PO->Fine-Tuned Control: Purchase Order, make sure you have operation '2' for PO output type.
    Phyllis.
    Edited by: Phyllis Waugh on Oct 10, 2008 6:40 AM

Maybe you are looking for