Released PR showing unrleased during PO creation..

Hi,
While creating PO from a released PR, I am getting below error although PR is fully released
" Purchase Requisition xxxxxxx , item 00020 not released for ordering."
Message no 06055
One thing i want to come to your notice that here in our organization we have not configured release strategy at item level.
Here PR is released at header level only.
Thanks
Nikesh Patel

Hi,
Please check the release indicator in the PR and check whether its maintained correctly as shown below:
Also, if the release is at header level, you cant find the release tab in item level and you cant find different release status in item level. I guess that the release strategy configuration was changed from item level to header level or vice versa. Due to this, the inconsistency occured. It is not recommended to change the release strategy config once its in use. Refer the KBA: 1635346 - Add a new release code to the release strategy of PR issue
Regards,
AKPT
Message was edited by: AKPT MM

Similar Messages

Search Reference document UI not showing up during complaint creation

Hello Gurus,
I am trying to create a Follow Up Complaint from a service request, but when I select my follow up complaint transaction type I am directly navigated to Complaint creation overview page Instead my requirement is I should be navigated to "Search Reference document" UI screen because we wanted to search for ERP Sales Transaction to add items into CRM Complaints.
I know that it can be achieved from Item assignment block of Complaint transaction but I wanted to the ERP Sales order Search option available.
for the same Complaint transaction type when I try to create it by clicking on work center "Complaint", I get the "Search Reference document" UI Screen, I want similar screen when I create the complaint as follow up to CRM Service Request as well.
how do I achieve this?
Thanks
Chandu

Hello Hari,
Sorry for the delayed Response, will check this BADI and if it helps then I will update this thread
Thanks
Chandu

Ultiboard part wizard doesn't show any copper layers during part creation

Ultiboard part wizard doesn't show any copper layers during part creation. I have to check the box to activate Copper Top in the part editor, once the part is made in order to see what I've made. I suspect there is a connection between this issue and my prior issue with the inability of the Multisim database to link to parts that I have recently made in Ultiboard. This all just began happening this week (of 8-27-12) Design Suite version is 10.1 & OS is Windows 7.
Thanks.

Hi Todc,
This is very strange. My suggestion is that you can try to delete the configuration file. To delete the configuration file, go to Options >> Global Preferences. Under the Paths tab, select the path to the configuration file all the way upto config\ as shown in screen shot. Close Ultiboard and navigate to this folder. Delete all the files and then try to open Ultiboard again. This should resolve the issue.
Please let me know what happens.
Regards,
Tayyab R,
National Instruments.
Attachments:
v10 Global Preferences.JPG ‏77 KB

Ora-12914: cannot create dictionary tablespace during tablespace creation.

Hi All,
I am new to Database and trying to create the dictionary tablespace in Database but its showing error like ora-12914: cannot create dictionary tablespace during tablespace creation.
Do i need to set any parameter for this error?
Please let me know the cause for this error.
Regards
Narender B

Hi
from doc.
12914, 00000, "Cannot migrate tablespace to dictionary managed type"
// *Cause: Attemp to migrate locally managed tablespace to dictionary managed
// type when the database has locally managed system tablespace.
// *Action: Command cannot be issued.
$
If system tablespace (I think from release 10g) is local management, all tablespaces must be local, dictionary is not possible
HTH
Antonio NAVARRO

Error message during cube creation

Hi expert,
System show the following error message during cube creation, please info how to solve this problem. Thanks.
Define the characteristics of the validity table for non-cumulatives
Message no. R7846
Diagnosis
The InfoCube contains non-cumulative values. A validity table is created for these non-cumulative values, in which the time interval is stored, for which the non-cumulative values are valid.
The validity table automatically contains the "most detailed" of the selected time characteristics (if such a one does not exist, it must be defined by the user, meaning transfered into the InfoCube).
Besides the most detailed time characteristic, additional characteristics for the InfoCube can be included in the validity table:
Examples of such characteristics are:
A "plan/actual" indicator, if differing time references exist for plan and actual values (actual values for the current fiscal year, plan values already for the next fiscal year),
the characteristic "plant", if the non-cumulative values are reported per plant, and it can occur that a plant already exists for plant A for a particular time period, but not yet for plant B.
Procedure
Define all additional characteristics that should be contained in the validity table by selecting the characteristics.
In the example above, the characteristics "plan/actual" and "plant" must be selected.
The system automatically generates the validity table according to the definition made. This table is automatically updated when data is loaded.

Hi,
Go to the Extras Tab in the definition of the Cube and there select " Maintain Non-Cumulatives" and there select the Plant check box. You can also check Material but it is not recommended. Now try to activate the cube. I think it will work for you.

Checks on vendors during the creation of PO with ME21N

Hi all,
i have this problem:
during the creation of a Purchase Order, for some types of them i have to bypass some checks that are made by standard on the Vendor.
Is it possibile to do? if it is, how can i do it?
Thanks
Lello

Hi
If they are standard controls, probably it'll mean to change the standard program: if your SAP release is ECC 6.00 u can try to use the Implicit Enhancement in order to change the standard else u need to register the standard to OSS in order to get the access key for modification.
Max

Vendor Text / Internal notes during Invoice creation

Hello,
We can create user ID for a Vendor contact using "Employee for Business partner" under "Manage Business partner" option.
With this user ID, while trying to create an Invoice, Vendor text / Internal notes drop down does not appear under "Document tab" at item level. We only see one option "Comments from Vendor".
But during invoice creation by a regular user , we see the drop down for "Vendor Text / Internal notes". We dont see the option "Comments from Vendor"
Question : Is it possible to have the "Vendor Notes / Internal notes" drop down made available for Vendor Contacts just like reuglar users?
FYI - We are using Standalone scenairo.
Thanks for your reply in advance.
Regards,
UM.

Hi Jon,
Like said Yann, try to use BBP_DOC_CHECK badi.
In this badi You can use FM BBP_PD_SC_GETDETAIL.
Example:
call function 'BBP_PD_SC_GETDETAIL'
    exporting
      i_guid     = iv_doc_guid
    importing
      e_header   = wa_e_header
    tables
      e_item     = e_item
      e_account = e_account
      e_longtext = e_longtext
      e_messages = e_messages.
This FM show You all longtext attached in document.
Regards,
Marcin Gajewski

Issue with WBS Selection during Reservation creation

Hi,
During Reservation creation through MB21, we insert movement type 221 and Plant ABCD. After enter, we need to select WBS Element...
Problem is here, because when we press F4 on WBS Element, it show all the data. But we required only related data of Plant (given earlier screen). If user select another WBS Element, not related to mentioned plant, consumption will be wrong.
We want to restrict it...
We want if we insert Plant ABCD, then only related WBS Element should be shown in F4 data.
Can we do it???

Hi,
I think its only possible thru an ABAP development. Please take help of your ABAP for enhancement of standard search help.
Warm regards,
Srinivas Potluri

Tax Code Creation when Excise is not Known during PO creation

Hi,
Scenario: Dealer's Scenario where during PO creation we don't know excise Amount and we consider PO price to include excise. Apart from excise we have CST. Excise and CST both will be inventorised.
Example: PO = 5000 (Inclusive of excise) on which CST is 1 % = 50
Now during MIGO I apply MRP tick which Splits PO base value and excise. Say 1000 is excise out of 5000.
GRN should be of 5050 ideally but the ISSUE is system posts it for 5060 Rs i.e on 1000 again system calculates CST 1% and adds it during GRN.
Can anyone suggest what could be the reason for same and how to resolve it ? Is there anything with tax code creation, tax procedure or MM pricing procedure ???
Br, Deepti

Hi Deepti,
Creation of Purchase order inclusive of Excise Duty. @ 5000/- .
2. The Duties should be Inventories. But you cannot show actual Duties at time of PO.
In FV11, maintain 0% for Inventory Duty conditions. Maintain 100% for Inventory Total conditions and also maintain CST condition.
Display Taxes
3. In MIGO Base will default as PO Price, We will change it to Actual as per vendors Invoice also Enter BED,Ecs,Seces as per Invoice. Do NOT tick MRP indicator.
4.Accounting Entry for GRN
Regards,
Sachin Indulkar

Cannot find the maps stored in import manager during port creation

Hi All,
I am unable to find any maps that i saved in import manager during port creation ,the maps are not showing in dropdown list during port creation in console.Do i need to store the maps that i have in import manager in specific place under mdm server,so that i can see them during port creation.
All i need to do is assign my import map during inbound port creation,but i cannot find any maps in console.
Could I know whether i am storing my maps some where other than default location.
Thanks
Aravind

Hi Aravind,
First of all check the remote system assigned to ur Port. After that go to import manager. When u logon to the import manager, u get a window "Connect to source". Mention the same remote system over there.Select the file type.Browse the file and map the fields,values,field matching and save the map. then unload the repo and assign the map to the port.
Second way is, u create the port first and give any particular remote system to it. Put the file (u want to use for mapping) in the ready folder of that port and in connect to source window select the type as port, remote system(ame as used port port) and port.then map and save. unload the repo and assign the map to port. Ready folder will be in ur server at location: C drive or D drive->SAP MDM 5.5 ->server->distributions->repo name->inbound->port code->ready. For this option, Ur port type should be manual. After assigning the map u can change it to automatic or keep it manual as per ur requirement.
Hope this solves ur problem.
Regards,
Dheeraj.
Edited by: Dheeraj Kumar on May 6, 2008 9:16 AM

Fits attribute on user id during user creation (Cont)

Hi Experts,
A little time ago , we posted some doubt regarding of how can we fits the attribute userID during user creation on User Interface.
The previous discussion was posted here:
"Fits attribute on user id during user creation"
Link abou our issue "scn.sap.com/thread/3532549"
As the Correct Answer:
Alternative 2, add a To IdentityStore pass as part of the task workflow where your logic is implemented in a jscript:
MSKEYVALUE=%MSKEYVALUE%
****AD_USER_ID=$FUNCTION.GENADUSERID(%MX_FIRSTNAME%!!%MX_LASTNAME%)$$
The script is running very well, but when we create a new employee on HR System (No SAP) this this script is not running just for this new user but for all other users already exitents on IDM. The script increase in Mass an not just for new user.
Does anyone know if this can be related with delta configuration, or this kind of validation ( create just for new employe placed on HR) needs to be done inside the script?
THank you very much.
Miguel

Hello Miguel,
is the "Create Identity"-task called by the HR-update-job?
The screenshot in the old thread just shows the three inputs. I guess, there are some more in the used task. Did you check, if the other lines have the dot as a prefix, so that these attributes are only filled (and therefor the script only runs), when the entry is created, but not updated?
If yes and it's missing for those two attributes, just add it.
Regards,
Steffi.

Read Invoice Plan data in BADI impl "ME_PROCESS_PO_CUST" during PO creation

Hello All,
We had implemented BADI "ME_PROCESS_PO_CUST", during the check & post methods I require to fetch the invoicing plan data for calculating the total value of purchase order. Because invoice plan is splitted just like an instalment for a period and the line item in PO is showing only one instalment, where as the ordered value of PO is the total of all instalments.
Invoice Plan data will be stored in FPLT table and the FPLNR can be fetched from EKPO.
Can any one tell me how to read the invoice plan data during the PO creation? Is there an interface & method for reading it?
Regards,
Ramesh
Edited by: Ramesh Babu Srikakollu on Apr 18, 2011 7:37 AM

Hello All,
I, myself found the solution for reading the Invoice Plan data of a Purchase Order during the creation/change. i.e. the runtime data for calculation.
Here is the solution:
Call this function module in the BADI implementation for the method CHECK or POST using the FPLNR (Invoice Plan Number), this returns the run time data of the invoice plan details during creation or change of a PO.
      data lt_fplt type table of fplt.
      CALL FUNCTION 'ML_INVOICING_SCHEDULE_READ'
        EXPORTING
          fplnr_imp = ls_opp_ekpo-fplnr
        TABLES
          xfplt     = lt_fplt.
Regards,
Ramesh

Concern during the creation of a menu contextual

Hello has all, I am a french developer using
Flex/ActionScript for the development of application to work.
I have a concern during the creation of a menu contextual.
I have could contater that a contextMenuItem with the value
“delete” is not posted in my menu contextual.
Sample :
var myContextMenu : ContextMenu() = new ContextMenu();
myContextMenu.hideBuiltInItems();
var customItemsArr : Array = new Array();
var item : ContextMenuItem = new
ContextMenuItem("supprimer");
item.addEventListener(ContextMenuEvent.MENU_ITEM_SELECT,
deleteHandler);
customItemsArr.push(item);
myContextMenu.customItems = customItemsArr;
on the other hand the same code with a different value that
to delete will be taken into account.
Is this an error of my share??
Does Y have you it of another words which are not to accept
in a menu contextual (nothing on this subject is specified in the
api one)??
thank you for your answer

Hi,
It is probably that the one or both of the following situations
apply:
1) please check the value for field BEXCLUDE in table GB01 for the
relevant field(s). If the field has the value X then it cannot be
substituted in the standard system.
Please refer to the attached note 42615 regarding this.
2) please check if any of these substitutions involved a modification
at callup point 3.
See the attached note 386896, where it states:
"As of Release ERP 2004, you can no longer use the source code
corrections as these can cause inconsistencies between the entry
view and the general ledger view.
As of Release ERP 2004 you can also use the AC_DOCUMENT BADI for
postings using the accounting interface."
Reg
Madhu M

Automatic contract creation during BP creation

Hi Experts,
Please give me the configuration part for the below functionality
Create a contract account automatically when we create a new business partner or a new role for an existing business partner.
Regards,
Srikanth.M

Automatic Contract Account Creation During BP Creation
Use
You can use this function in Media Sales and Distribution to have the system create a contract account automatically when you create a new business partner (BP) or a new role for an existing business partner. For example, this is useful when processing orders in Media Product Sales and Distribution that require an existing contract account for processing.
If a contract account already exists for the business partner, the system does not create an additional one.
Prerequisites
You have activated the business function Media, Subscription Management 2 (MED_MSD_1). If you use SAP Media Sales and Advertising North America Extension, please see also the release notes for this business function.
You should have assigned a contract account template to the role in question in the Customizing settings for the SAP Business Partner for Media Companies under Contract Account Assignment ® Define Contract Account Templates. If you create a business partner in several roles and different templates are assigned for these roles, you can specify a priority to determine which contract account the system is to use as the template.
Please note that you need a template business partner in order to create a contract account template. The contract account template must not have an incoming or outgoing payment method, since these fields are business partner-specific and would be overwritten by the function for automatic contract account creation.
Features
The following functions can be used to create a new contract account automatically during business partner creation:
●      Maintain Business Partner (transaction BP)
●      Data transfer function for the SAP Business Partner (transaction KCLJ)
●      Creation in background processing (used in the Customer Interaction Center, in the Internet Application Components, and in fast entry)
Please note that you cannot create a contract account automatically if you create business partners using the BAPI BAPIBUSISM007_CREATEFROMDATA.

Sales Order Update during Delivery Creation

Hi,
I have a requirement to update one of the customer specific sales order header table field during the creation of delivery.I'm trying to do this through the delivery user exit USEREXIT_SAVE_DOCUMENT program MV50AFZ1.
I have a structure CVBAK available, but if i update customer specific the field in the CVBAK it's not changing the sales order.I won't be able to use BAPI or BDC to update SO from the exit, because during this delivery process the current sales order is being used, so system doesn't allow me to acces the sales order.
Please give me the solution for my problem.
Thanks

Hi
Probably the table VBAK is not updated by delivery transaction, so u can try to update that field (if it's custom field) by yourself.
U can create a you function module for updating and call it in USEREXIT_SAVE_DOCUMENT:
FORM USEREXIT_SAVE_DOCUMENT.
CALL FUNCTION 'Z_VBAK_UPDATE'
      IN UPDATE TASK
      EXPORTING
           VBAK = VBAK.
ENDFORM.
In 'Z_VBAK_UPDATE' insert the code to update VBAK, you can also try to call the BAPI here, perhaps (the fm is called in update tusk) in this moment all blocks are released.
Max

Released PR showing unrleased during PO creation..

Similar Messages

Maybe you are looking for