Remote Control - Loading an Image

Hi,
I'm using the Web Publishing Tool to try to web enable a application I've written. I wrote the application in LV7.
Anyway the application needs to load a large blank .jpg image ( about
24000x4000 pixels which is about 624KB). When I try to load the
image I get a "The connection with the server has been broken"
error. I tried loading a smaller image and this loaded
fine. I also tried loading this in LV8 and it just seemed to
freeze up. Is there a limit on what size of image can be loaded?
Would anyone have any ideas on this as I'm new to all this remote control stuff.
Thanks,
Eoin

Eoin,
I have never read from a limit with regard to data amount. I think, you
should try to increase the timeout of the webserver
(Tools-Options-WebServer Configuration).
Possibly that eliminates your problem...
The following document lists all limitations of remote panels:
http://digital.ni.com/public.nsf/allkb/21B9A9C913F54F918625703D004D6FD9
Regards,
ThSa
http://www.newgistics.com

Similar Messages

How can i control what images load on my project to save preload time and avoid loading all images, elements, divs not yet visible?

Sup buddies,
How can I control what images load on my project to save preload time and avoid loading all images, elements, divs not yet visible?
As the project grows in size the load time increases. How does one control not loading all images ,divs,elements etc. until they're
needed on the timeline? For example some sections are off and only become visible when recalled. My projects slowly grow in size so loading
all images , is counter productive . My other option would be to create separate htmls but that breaks the seamless user experience .
TY...Over N Out...

hello, kiwi
quote: "Is there an easy way to burn a completed project to DVD, but keep only the (lo res, lo size) previews on my hard drive?"
yes.
maybe,...
1. you might think of making DVD backups first prior to importing the photos into Aperture. "Store Files: In their current location" once in Aperture make low rez Previews, and export finished Project.
or,
2. bring in the photographs to hard drive first prior to importing the photos into Aperture. "Store Files: In their current location" once in Aperture make low rez Previews, and export finished Project.
the low rez Previews will stay in Aperture but the high quality Versions will be exported onto DVDs and gone from the hard drive (if you delete the originals).
another way would be to export small about 50-70 pixel wide high quality jpegs to a folder on your Desktop and import & keep these in Aperture Library as a reference. make metadata to show where the original Project DVDs are stored and DVD filing system used.
victor

Load picture control with png image from the web

Hi guys,
Is there an example anywhere for Labview 8.6 for loading a picture control with png image from the web?

Hi lavalava,
here you find a note on how to load pictures from the internet. After grabbing the data you could save them to a file, load the file with the picture file functions and then convert it into the image datatype to feed a picture indicator with the data...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How can Image sliding work in flash cs4 on mac using mx.controls.loader

Hi i started working in flash after a long time. i am creating a virtual catalogue DVD for my client. to work on it quickly, i used mx.controls.loader component to call jpg images in my movie.i just gave contect path in component inspector. my working OS platform is windows xp. and everything is working perfectly fine. i used actionscripting on buttons to slide images left and right. when my client opened it in mac everything else was fine but images were not loading. although the directory path everything is right and working here but not in mac.

Hi Mate - I'm using CS4 Extended Ps v11.0.2, according to the Adobe site photoshop instals a 32 bit version only. How can I find out exactly by checking out preferences etc? I'll have to go hunt out the box.
Thanks for the reply.

Remote Control and error 1456

We are having a Remote control issue with more and more PC's. If they are
logged in, we can remote control them. If they have bee restarted and are
waiting to log in, then we can not remote control them. We Can use
diagnostics on them though....
Zen 4.01 ir7 is where we are.
We are also having an issue where many times after imaging, the ISD is not
populated into windows, and gets associated with our Image PC's workstation
object. If we clear the ISD, delete both workstation objects, and reboot the
target PC, it does re-import correctly. The remote control issue does not
get fixed when this happens though....
I have seen that rmerrorlog.txt has been asked for in the past to help solve
this issue, so We are including that. Any help in resolving what we have set
wrong is appreciated.
Thanks,
Mark Waters, CNA
John Evans, MCNE
Systems Group
Housing and Food Services
Michigan State University
watersmd at mail dot hfs dot msu dot edu
1st attempt to remote control target PC was not Logged in. It Failed - Error
1456.
2nd attempt was when target PC was logged in. It Worked.
PC with ConsoleOne - A004686
#(89212)# 11:45:46 AM 02/13/07 Normal : CONSOLE > Starting console
#(89212)# 11:45:46 AM 02/13/07 Normal : ZenGetLangValueFromNWLanguage:
Trying to load the resource DLL from Nls\ENGLISH directory
#(89212)# 11:45:46 AM 02/13/07 Normal : CONSOLE > Resource is loaded
successfully
#(89212)# 11:45:46 AM 02/13/07 Normal : CONSOLE > Inside
LoadandParseCommand
#(89212)# 11:45:46 AM 02/13/07 NORMAL : CONSOLE > AppData.bSessionRestart ==
FALSE Hiding window
#(89212)# 11:45:46 AM 02/13/07 NORMAL : CONSOLE > Command line parameters
parsed successfully
#(89212)# 11:45:46 AM 02/13/07 NORMAL : CONSOLE > Init Client
Successfull!!!
#(89212)# 11:45:46 AM 02/13/07 NORMAL : Before Authentication
#(89212)# 11:45:47 AM 02/13/07 NORMAL : After Authentication
#(89212)# 11:45:47 AM 02/13/07 CRITICAL : Authentication Failed:
#(89212)# 11:45:51 AM 02/13/07 CRITICAL : CONSOLE > LoadAndAuthenticate
returned FALSE
#(89212)# 11:45:51 AM 02/13/07 CRITICAL : CONSOLE > Authentication Failed:
returning -201
#(89212)# 11:45:51 AM 02/13/07 NORMAL : Out of process
#(89212)# 11:47:03 AM 02/13/07 Normal : CONSOLE > Starting console
#(89212)# 11:47:03 AM 02/13/07 Normal : ZenGetLangValueFromNWLanguage:
Trying to load the resource DLL from Nls\ENGLISH directory
#(89212)# 11:47:03 AM 02/13/07 Normal : CONSOLE > Resource is loaded
successfully
#(89212)# 11:47:03 AM 02/13/07 Normal : CONSOLE > Inside
LoadandParseCommand
#(89212)# 11:47:03 AM 02/13/07 NORMAL : CONSOLE > AppData.bSessionRestart ==
FALSE Hiding window
#(89212)# 11:47:03 AM 02/13/07 NORMAL : CONSOLE > Command line parameters
parsed successfully
#(89212)# 11:47:03 AM 02/13/07 NORMAL : CONSOLE > Init Client
Successfull!!!
#(89212)# 11:47:03 AM 02/13/07 NORMAL : Before Authentication
#(89212)# 11:47:04 AM 02/13/07 NORMAL : After Authentication
#(89212)# 11:47:04 AM 02/13/07 NORMAL : CONSOLE > Authentication
Successful!!!
#(89212)# 11:47:04 AM 02/13/07 Normal : CONSOLE > Initialize returned TRUE
#(89212)# 11:47:04 AM 02/13/07 NORMAL : RTT > Avg Delay is 0
#(89212)# 11:47:04 AM 02/13/07 NORMAL : CONSOLE > Sent out WallPaperRequest
#(89212)# 11:47:04 AM 02/13/07 Normal : CONSOLE > Send Thread : Received
Startreceiving event
#(89212)# 11:47:04 AM 02/13/07 NORMAL : CONSOLE > Receive Thread : Received
Startreceiving Event
#(89212)# 11:47:05 AM 02/13/07 NORMAL : CONSOLE > Received CMD_AGENT_READY
Command
#(89212)# 11:47:05 AM 02/13/07 NORMAL : CONSOLE > Compression sending is 6
#(89212)# 11:47:05 AM 02/13/07 NORMAL : CONSOLE > Value of did->DrishtiType
sent to Agent is 1
#(89212)# 11:47:05 AM 02/13/07 NORMAL : CONSOLE > Sent out the DisplayInfo
Packet succesfully
#(89212)# 11:47:06 AM 02/13/07 Critical : HandlePacket >>Memory
reallocation
#(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > LookForTerminate got an
event
#(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > out of SendThread
#(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > Value returned from the
ReceiveData(For Header) is -1
#(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > out of StartReceiveThread
#(89212)# 11:47:13 AM 02/13/07 NORMAL : Out of process
#(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > Receive thread terminated
#(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > Send thread terminated
#(89212)# 11:47:13 AM 02/13/07 NORMAL : out of Startsession
#(89212)# 11:47:13 AM 02/13/07 NORMAL : Out of startsession :
HandleRCSession
#(89212)# 11:47:13 AM 02/13/07 NORMAL : Out of DeInit
#(89212)# 11:47:13 AM 02/13/07 NORMAL : out of HandleRCSession
Target PC - A003514
#(768)# 11:45:46 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\ZenLite.dll
#(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\ZenPol32.dll
#(768)# 11:45:47 AM 02/13/07 Normal : ZENNDSUtil: Successfully loaded
dependent modules...
#(768)# 11:45:47 AM 02/13/07 Normal : LoadZenAutilLibraryAndGetProc:
Successfully loaded ZenAutil.dll and its dependent DLLs
#(768)# 11:45:47 AM 02/13/07 Normal : Console version is SP1
#(768)# 11:45:47 AM 02/13/07 Normal : ZENUtil: ZENIsWorkstationRegistered:
wsDN = 'A003514.Workstations.UHsg.HFS'
#(768)# 11:45:47 AM 02/13/07 Normal : Workstation is registered
#(768)# 11:45:47 AM 02/13/07 Normal : ZENNDSUtil: Attempting to read
policies...
#(768)# 11:45:47 AM 02/13/07 Normal : ZENUtil: ZENIsWorkstationRegistered:
wsDN = 'A003514.Workstations.UHsg.HFS'
#(768)# 11:45:47 AM 02/13/07 Normal : Workstation is registered
#(768)# 11:45:47 AM 02/13/07 Normal : Reading workstation DN and tree
name...
#(768)# 11:45:47 AM 02/13/07 Normal : workstation DN -
A003514.Workstations.UHsg.HFS, treename - HFS
#(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(768)# 11:45:47 AM 02/13/07 Critical : Workstation NOT yet
authenticated...
#(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: initializeContext()
failed...
#(768)# 11:45:47 AM 02/13/07 Normal : Reading workstation DN and tree
name...
#(768)# 11:45:47 AM 02/13/07 Normal : workstation DN -
A003514.Workstations.UHsg.HFS, treename - HFS
#(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(768)# 11:45:47 AM 02/13/07 Critical : Workstation NOT yet
authenticated...
#(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: initializeContext()
failed...
#(768)# 11:45:47 AM 02/13/07 Normal : Neither policy settings active. All
operations disabled.
#(768)# 11:45:47 AM 02/13/07 Normal : ZENNDSUtil: Finished reading policies
#(768)# 11:45:47 AM 02/13/07 Normal : Reading workstation DN and tree
name...
#(768)# 11:45:47 AM 02/13/07 Normal : workstation DN -
A003514.Workstations.UHsg.HFS, treename - HFS
#(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(768)# 11:45:47 AM 02/13/07 Critical : Workstation NOT yet
authenticated...
#(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: initializeContext()
failed...
#(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: readVerifyInformation:
initializeContext() failed for master 0, tree:HFS
#(768)# 11:45:47 AM 02/13/07 Normal : AgentDSAuthenticationHandler:
authentication for nearest replica returned : -201
#(768)# 11:45:47 AM 02/13/07 Normal : Reading workstation DN and tree
name...
#(768)# 11:45:47 AM 02/13/07 Normal : workstation DN -
A003514.Workstations.UHsg.HFS, treename - HFS
#(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(768)# 11:45:47 AM 02/13/07 Critical : Workstation NOT yet
authenticated...
#(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: initializeContext()
failed...
#(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: readVerifyInformation:
initializeContext() failed for master 1, tree:HFS
#(768)# 11:45:47 AM 02/13/07 Normal : AgentDSAuthenticationHandler:
authentication for master replica returned : -201
#(768)# 11:45:47 AM 02/13/07 Critical : Unable to reach the eDirectory
server
#(768)# 11:45:47 AM 02/13/07 Critical :
RMAudit::Auditing.cpp:recordAuditLog() The audit record is corrupted.
#(768)# 11:45:47 AM 02/13/07 Normal : RMSessionFinished - Begin
#(768)# 11:45:47 AM 02/13/07 Normal : ZENNDSUtil: Unloaded modules...
#(768)# 11:45:47 AM 02/13/07 Normal : UnLoadZenAutilLibrary :Successfully
unloaded ZenAutil.dll
#(768)# 11:47:02 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\ZenLite.dll
#(768)# 11:47:03 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\ZenPol32.dll
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Successfully loaded
dependent modules...
#(768)# 11:47:03 AM 02/13/07 Normal : LoadZenAutilLibraryAndGetProc:
Successfully loaded ZenAutil.dll and its dependent DLLs
#(768)# 11:47:03 AM 02/13/07 Normal : Console version is SP1
#(768)# 11:47:03 AM 02/13/07 Normal : ZENUtil: ZENIsWorkstationRegistered:
wsDN = 'CN=A003514.OU=Workstations.OU=UHsg.O=HFS'
#(768)# 11:47:03 AM 02/13/07 Normal : Workstation is registered
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Attempting to read
policies...
#(768)# 11:47:03 AM 02/13/07 Normal : ZENUtil: ZENIsWorkstationRegistered:
wsDN = 'CN=A003514.OU=Workstations.OU=UHsg.O=HFS'
#(768)# 11:47:03 AM 02/13/07 Normal : Workstation is registered
#(768)# 11:47:03 AM 02/13/07 Normal : Reading workstation DN and tree
name...
#(768)# 11:47:03 AM 02/13/07 Normal : workstation DN -
CN=A003514.OU=Workstations.OU=UHsg.O=HFS, treename - HFS
#(768)# 11:47:03 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(768)# 11:47:03 AM 02/13/07 Normal : Workstation IS authenticated...
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Loaded [ZENNW32.DLL]
successfully
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Successfully initialized
context
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Failure in reading boolean
attribute DM:Ignore Policy in CN=A003514.OU=Workstations.OU=UHsg.O=HFS
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Attempt to read using
user:, tree:HFS
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Workstation Policy -
'z_Global Workstation Package:General:Remote Control
Policy.WorkstationPackages.Workstations.UHsg.HFS'
#(768)# 11:47:03 AM 02/13/07 Normal : Reading workstation DN and tree
name...
#(768)# 11:47:03 AM 02/13/07 Normal : workstation DN -
CN=A003514.OU=Workstations.OU=UHsg.O=HFS, treename - HFS
#(768)# 11:47:03 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(768)# 11:47:03 AM 02/13/07 Normal : Workstation IS authenticated...
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Loaded [ZENNW32.DLL]
successfully
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Successfully initialized
context
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: User Policy - ''
#(768)# 11:47:03 AM 02/13/07 Normal : Only workstation policy settings
active...
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Finished reading policies
#(768)# 11:47:03 AM 02/13/07 Normal : Reading workstation DN and tree
name...
#(768)# 11:47:03 AM 02/13/07 Normal : workstation DN -
CN=A003514.OU=Workstations.OU=UHsg.O=HFS, treename - HFS
#(768)# 11:47:03 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(768)# 11:47:03 AM 02/13/07 Normal : Workstation IS authenticated...
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Loaded [ZENNW32.DLL]
successfully
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Successfully initialized
context
#(768)# 11:47:03 AM 02/13/07 Normal : AgentDSAuthenticationHandler:
authentication for nearest replica returned : 0
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Unloaded modules...
#(768)# 11:47:03 AM 02/13/07 Normal : UnLoadZenAutilLibrary :Successfully
unloaded ZenAutil.dll
#(768)# 11:47:03 AM 02/13/07 Normal : LaunchRcRvAgent: CalculateRTT is
over...
#(768)# 11:47:04 AM 02/13/07 Normal : Darapan is loaded successfully
#(768)# 11:47:04 AM 02/13/07 Normal : Init Proc of RCAgent has been called
successfully
#(768)# 11:47:04 AM 02/13/07 Critical : Successfully executed RcAgent.DLL's
Init Proc Address
#(768)# 11:47:04 AM 02/13/07 Normal : Call to update desktop is made
#(768)# 11:47:04 AM 02/13/07 normal : CMD_AGENT_READY is sent
#(768)# 11:47:04 AM 02/13/07 normal : CMD_SUPRESS_WALLPAPER is received
#(768)# 11:47:04 AM 02/13/07 Normal : WallPaperThread is closed
#(768)# 11:47:04 AM 02/13/07 Normal : CMD_KEY_MASK is received
#(768)# 11:47:04 AM 02/13/07 normal : CMD_DISPLAY_INFO is received
#(768)# 11:47:04 AM 02/13/07 Normal : Display Info. received. Remote Control
session for P1.
#(768)# 11:47:04 AM 02/13/07 Normal : Console version is SP1
#(768)# 11:47:04 AM 02/13/07 Normal : Calling startlookforchangesthread.
#(768)# 11:47:04 AM 02/13/07 Normal : InitialDisplayInfo sent
#(768)# 11:47:04 AM 02/13/07 Normal : DRIVER to use is DARPAN
#(768)# 11:47:04 AM 02/13/07 Normal : CallInitDrishti :
ESC_START_VIEWING_DARPAN Successful
#(768)# 11:47:04 AM 02/13/07 Normal : Came out after loading the driver
#(768)# 11:47:04 AM 02/13/07 normal : Setting hook to cursor shapes is ok
#(768)# 11:47:04 AM 02/13/07 Normal : Got WM_SWITCH_DESKTOP
#(768)# 11:47:05 AM 02/13/07 Normal : Call to update desktop is made
#(768)# 11:47:12 AM 02/13/07 Normal : RecvThread is returning
#(768)# 11:47:12 AM 02/13/07 Normal : WaitThread : WaitForMultipleObjects
returned. Closed thread is = 1
#(768)# 11:47:12 AM 02/13/07 Normal : Periodic Check thread is returning
#(768)# 11:47:12 AM 02/13/07 Normal : In desktop change thread terminate
session is set
#(768)# 11:47:12 AM 02/13/07 normal : Terminate session event is set in send
thread
#(768)# 11:47:12 AM 02/13/07 Normal : Close msg for visible window. Calling
CloseConnection().
#(768)# 11:47:12 AM 02/13/07 Normal : Clean up is going to start
#(768)# 11:47:12 AM 02/13/07 Normal : LookforchangesThread returning
#(768)# 11:47:12 AM 02/13/07 Normal : WallPaperThread is closed
#(768)# 11:47:12 AM 02/13/07 normal : All the threads are closed normally
#(768)# 11:47:12 AM 02/13/07 Normal : Call to update desktop is made
#(768)# 11:47:12 AM 02/13/07 normal : RC session is completed successfully
#(768)# 11:47:12 AM 02/13/07 Normal : CZenRmServer::RCRvThread:
hAcceptThread Signals
#(768)# 11:47:12 AM 02/13/07 Critical :
RMAudit::Auditing.cpp:recordAuditLog() The audit record is corrupted.
#(768)# 11:47:12 AM 02/13/07 Normal : RcRvThread: RcAgent.dll is
successfully unloaded from memory
#(768)# 11:47:12 AM 02/13/07 Normal : RcRvThread: Ict_Uc.dll is not unloaded
from memory ...
#(768)# 11:47:12 AM 02/13/07 Normal : RcRvThread: Ict_Uc.dll is not unloaded
from memory and it is forcefully unloaded...
#(768)# 11:47:12 AM 02/13/07 Normal : Darapan is Unloaded successfully
#(768)# 11:47:12 AM 02/13/07 Normal : RMSessionFinished - Begin

Delete a few test workstation objects. Delete the object that was created by
the Image PC. Run DSREPAIR. Disable windows firewall. Reboot the PCs. Check
if the Workstation objects are created and if you can remotely control
them.
"Mark Waters" <[email protected]> wrote in message
news:[email protected]...
> We are having a Remote control issue with more and more PC's. If they are
> logged in, we can remote control them. If they have bee restarted and are
> waiting to log in, then we can not remote control them. We Can use
> diagnostics on them though....
> Zen 4.01 ir7 is where we are.
> We are also having an issue where many times after imaging, the ISD is not
> populated into windows, and gets associated with our Image PC's
> workstation
> object. If we clear the ISD, delete both workstation objects, and reboot
> the
> target PC, it does re-import correctly. The remote control issue does not
> get fixed when this happens though....
> I have seen that rmerrorlog.txt has been asked for in the past to help
> solve
> this issue, so We are including that. Any help in resolving what we have
> set
> wrong is appreciated.
>
> Thanks,
> Mark Waters, CNA
> John Evans, MCNE
> Systems Group
> Housing and Food Services
> Michigan State University
> watersmd at mail dot hfs dot msu dot edu
>
>
> 1st attempt to remote control target PC was not Logged in. It Failed -
> Error
> 1456.
> 2nd attempt was when target PC was logged in. It Worked.
>
>
> PC with ConsoleOne - A004686
>
> #(89212)# 11:45:46 AM 02/13/07 Normal : CONSOLE > Starting console
> #(89212)# 11:45:46 AM 02/13/07 Normal : ZenGetLangValueFromNWLanguage:
> Trying to load the resource DLL from Nls\ENGLISH directory
> #(89212)# 11:45:46 AM 02/13/07 Normal : CONSOLE > Resource is loaded
> successfully
> #(89212)# 11:45:46 AM 02/13/07 Normal : CONSOLE > Inside
> LoadandParseCommand
> #(89212)# 11:45:46 AM 02/13/07 NORMAL : CONSOLE > AppData.bSessionRestart
> ==
> FALSE Hiding window
> #(89212)# 11:45:46 AM 02/13/07 NORMAL : CONSOLE > Command line parameters
> parsed successfully
> #(89212)# 11:45:46 AM 02/13/07 NORMAL : CONSOLE > Init Client
> Successfull!!!
> #(89212)# 11:45:46 AM 02/13/07 NORMAL : Before Authentication
> #(89212)# 11:45:47 AM 02/13/07 NORMAL : After Authentication
> #(89212)# 11:45:47 AM 02/13/07 CRITICAL : Authentication Failed:
> #(89212)# 11:45:51 AM 02/13/07 CRITICAL : CONSOLE > LoadAndAuthenticate
> returned FALSE
> #(89212)# 11:45:51 AM 02/13/07 CRITICAL : CONSOLE > Authentication Failed:
> returning -201
> #(89212)# 11:45:51 AM 02/13/07 NORMAL : Out of process
>
>
>
> #(89212)# 11:47:03 AM 02/13/07 Normal : CONSOLE > Starting console
> #(89212)# 11:47:03 AM 02/13/07 Normal : ZenGetLangValueFromNWLanguage:
> Trying to load the resource DLL from Nls\ENGLISH directory
> #(89212)# 11:47:03 AM 02/13/07 Normal : CONSOLE > Resource is loaded
> successfully
> #(89212)# 11:47:03 AM 02/13/07 Normal : CONSOLE > Inside
> LoadandParseCommand
> #(89212)# 11:47:03 AM 02/13/07 NORMAL : CONSOLE > AppData.bSessionRestart
> ==
> FALSE Hiding window
> #(89212)# 11:47:03 AM 02/13/07 NORMAL : CONSOLE > Command line parameters
> parsed successfully
> #(89212)# 11:47:03 AM 02/13/07 NORMAL : CONSOLE > Init Client
> Successfull!!!
> #(89212)# 11:47:03 AM 02/13/07 NORMAL : Before Authentication
> #(89212)# 11:47:04 AM 02/13/07 NORMAL : After Authentication
> #(89212)# 11:47:04 AM 02/13/07 NORMAL : CONSOLE > Authentication
> Successful!!!
> #(89212)# 11:47:04 AM 02/13/07 Normal : CONSOLE > Initialize returned TRUE
> #(89212)# 11:47:04 AM 02/13/07 NORMAL : RTT > Avg Delay is 0
> #(89212)# 11:47:04 AM 02/13/07 NORMAL : CONSOLE > Sent out
> WallPaperRequest
> #(89212)# 11:47:04 AM 02/13/07 Normal : CONSOLE > Send Thread : Received
> Startreceiving event
> #(89212)# 11:47:04 AM 02/13/07 NORMAL : CONSOLE > Receive Thread :
> Received
> Startreceiving Event
> #(89212)# 11:47:05 AM 02/13/07 NORMAL : CONSOLE > Received CMD_AGENT_READY
> Command
> #(89212)# 11:47:05 AM 02/13/07 NORMAL : CONSOLE > Compression sending is 6
> #(89212)# 11:47:05 AM 02/13/07 NORMAL : CONSOLE > Value of
> did->DrishtiType
> sent to Agent is 1
> #(89212)# 11:47:05 AM 02/13/07 NORMAL : CONSOLE > Sent out the DisplayInfo
> Packet succesfully
> #(89212)# 11:47:06 AM 02/13/07 Critical : HandlePacket >>Memory
> reallocation
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > LookForTerminate got an
> event
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > out of SendThread
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > Value returned from the
> ReceiveData(For Header) is -1
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > out of
> StartReceiveThread
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : Out of process
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > Receive thread
> terminated
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > Send thread terminated
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : out of Startsession
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : Out of startsession :
> HandleRCSession
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : Out of DeInit
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : out of HandleRCSession
>
>
> Target PC - A003514
>
> #(768)# 11:45:46 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\ZenLite.dll
> #(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\ZenPol32.dll
> #(768)# 11:45:47 AM 02/13/07 Normal : ZENNDSUtil: Successfully loaded
> dependent modules...
> #(768)# 11:45:47 AM 02/13/07 Normal : LoadZenAutilLibraryAndGetProc:
> Successfully loaded ZenAutil.dll and its dependent DLLs
> #(768)# 11:45:47 AM 02/13/07 Normal : Console version is SP1
> #(768)# 11:45:47 AM 02/13/07 Normal : ZENUtil: ZENIsWorkstationRegistered:
> wsDN = 'A003514.Workstations.UHsg.HFS'
> #(768)# 11:45:47 AM 02/13/07 Normal : Workstation is registered
> #(768)# 11:45:47 AM 02/13/07 Normal : ZENNDSUtil: Attempting to read
> policies...
> #(768)# 11:45:47 AM 02/13/07 Normal : ZENUtil: ZENIsWorkstationRegistered:
> wsDN = 'A003514.Workstations.UHsg.HFS'
> #(768)# 11:45:47 AM 02/13/07 Normal : Workstation is registered
> #(768)# 11:45:47 AM 02/13/07 Normal : Reading workstation DN and tree
> name...
> #(768)# 11:45:47 AM 02/13/07 Normal : workstation DN -
> A003514.Workstations.UHsg.HFS, treename - HFS
> #(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\WMSchApi.dll
> #(768)# 11:45:47 AM 02/13/07 Critical : Workstation NOT yet
> authenticated...
> #(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: initializeContext()
> failed...
> #(768)# 11:45:47 AM 02/13/07 Normal : Reading workstation DN and tree
> name...
> #(768)# 11:45:47 AM 02/13/07 Normal : workstation DN -
> A003514.Workstations.UHsg.HFS, treename - HFS
> #(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\WMSchApi.dll
> #(768)# 11:45:47 AM 02/13/07 Critical : Workstation NOT yet
> authenticated...
> #(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: initializeContext()
> failed...
> #(768)# 11:45:47 AM 02/13/07 Normal : Neither policy settings active. All
> operations disabled.
> #(768)# 11:45:47 AM 02/13/07 Normal : ZENNDSUtil: Finished reading
> policies
> #(768)# 11:45:47 AM 02/13/07 Normal : Reading workstation DN and tree
> name...
> #(768)# 11:45:47 AM 02/13/07 Normal : workstation DN -
> A003514.Workstations.UHsg.HFS, treename - HFS
> #(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\WMSchApi.dll
> #(768)# 11:45:47 AM 02/13/07 Critical : Workstation NOT yet
> authenticated...
> #(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: initializeContext()
> failed...
> #(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: readVerifyInformation:
> initializeContext() failed for master 0, tree:HFS
> #(768)# 11:45:47 AM 02/13/07 Normal : AgentDSAuthenticationHandler:
> authentication for nearest replica returned : -201
> #(768)# 11:45:47 AM 02/13/07 Normal : Reading workstation DN and tree
> name...
> #(768)# 11:45:47 AM 02/13/07 Normal : workstation DN -
> A003514.Workstations.UHsg.HFS, treename - HFS
> #(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\WMSchApi.dll
> #(768)# 11:45:47 AM 02/13/07 Critical : Workstation NOT yet
> authenticated...
> #(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: initializeContext()
> failed...
> #(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: readVerifyInformation:
> initializeContext() failed for master 1, tree:HFS
> #(768)# 11:45:47 AM 02/13/07 Normal : AgentDSAuthenticationHandler:
> authentication for master replica returned : -201
> #(768)# 11:45:47 AM 02/13/07 Critical : Unable to reach the eDirectory
> server
> #(768)# 11:45:47 AM 02/13/07 Critical :
> RMAudit::Auditing.cpp:recordAuditLog() The audit record is corrupted.
> #(768)# 11:45:47 AM 02/13/07 Normal : RMSessionFinished - Begin
> #(768)# 11:45:47 AM 02/13/07 Normal : ZENNDSUtil: Unloaded modules...
> #(768)# 11:45:47 AM 02/13/07 Normal : UnLoadZenAutilLibrary :Successfully
> unloaded ZenAutil.dll
>
>
> #(768)# 11:47:02 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\ZenLite.dll
> #(768)# 11:47:03 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\ZenPol32.dll
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Successfully loaded
> dependent modules...
> #(768)# 11:47:03 AM 02/13/07 Normal : LoadZenAutilLibraryAndGetProc:
> Successfully loaded ZenAutil.dll and its dependent DLLs
> #(768)# 11:47:03 AM 02/13/07 Normal : Console version is SP1
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENUtil: ZENIsWorkstationRegistered:
> wsDN = 'CN=A003514.OU=Workstations.OU=UHsg.O=HFS'
> #(768)# 11:47:03 AM 02/13/07 Normal : Workstation is registered
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Attempting to read
> policies...
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENUtil: ZENIsWorkstationRegistered:
> wsDN = 'CN=A003514.OU=Workstations.OU=UHsg.O=HFS'
> #(768)# 11:47:03 AM 02/13/07 Normal : Workstation is registered
> #(768)# 11:47:03 AM 02/13/07 Normal : Reading workstation DN and tree
> name...
> #(768)# 11:47:03 AM 02/13/07 Normal : workstation DN -
> CN=A003514.OU=Workstations.OU=UHsg.O=HFS, treename - HFS
> #(768)# 11:47:03 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\WMSchApi.dll
> #(768)# 11:47:03 AM 02/13/07 Normal : Workstation IS authenticated...
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Loaded [ZENNW32.DLL]
> successfully
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Successfully initialized
> context
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Failure in reading
> boolean
> attribute DM:Ignore Policy in CN=A003514.OU=Workstations.OU=UHsg.O=HFS
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Attempt to read using
> user:, tree:HFS
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Workstation Policy -
> 'z_Global Workstation Package:General:Remote Control
> Policy.WorkstationPackages.Workstations.UHsg.HFS'
> #(768)# 11:47:03 AM 02/13/07 Normal : Reading workstation DN and tree
> name...
> #(768)# 11:47:03 AM 02/13/07 Normal : workstation DN -
> CN=A003514.OU=Workstations.OU=UHsg.O=HFS, treename - HFS
> #(768)# 11:47:03 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\WMSchApi.dll
> #(768)# 11:47:03 AM 02/13/07 Normal : Workstation IS authenticated...
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Loaded [ZENNW32.DLL]
> successfully
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Successfully initialized
> context
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: User Policy - ''
> #(768)# 11:47:03 AM 02/13/07 Normal : Only workstation policy settings
> active...
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Finished reading
> policies
> #(768)# 11:47:03 AM 02/13/07 Normal : Reading workstation DN and tree
> name...
> #(768)# 11:47:03 AM 02/13/07 Normal : workstation DN -
> CN=A003514.OU=Workstations.OU=UHsg.O=HFS, treename - HFS
> #(768)# 11:47:03 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\WMSchApi.dll
> #(768)# 11:47:03 AM 02/13/07 Normal : Workstation IS authenticated...
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Loaded [ZENNW32.DLL]
> successfully
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Successfully initialized
> context
> #(768)# 11:47:03 AM 02/13/07 Normal : AgentDSAuthenticationHandler:
> authentication for nearest replica returned : 0
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Unloaded modules...
> #(768)# 11:47:03 AM 02/13/07 Normal : UnLoadZenAutilLibrary :Successfully
> unloaded ZenAutil.dll
> #(768)# 11:47:03 AM 02/13/07 Normal : LaunchRcRvAgent: CalculateRTT is
> over...
> #(768)# 11:47:04 AM 02/13/07 Normal : Darapan is loaded successfully
> #(768)# 11:47:04 AM 02/13/07 Normal : Init Proc of RCAgent has been called
> successfully
> #(768)# 11:47:04 AM 02/13/07 Critical : Successfully executed
> RcAgent.DLL's
> Init Proc Address
> #(768)# 11:47:04 AM 02/13/07 Normal : Call to update desktop is made
> #(768)# 11:47:04 AM 02/13/07 normal : CMD_AGENT_READY is sent
> #(768)# 11:47:04 AM 02/13/07 normal : CMD_SUPRESS_WALLPAPER is received
> #(768)# 11:47:04 AM 02/13/07 Normal : WallPaperThread is closed
> #(768)# 11:47:04 AM 02/13/07 Normal : CMD_KEY_MASK is received
> #(768)# 11:47:04 AM 02/13/07 normal : CMD_DISPLAY_INFO is received
> #(768)# 11:47:04 AM 02/13/07 Normal : Display Info. received. Remote
> Control
> session for P1.
> #(768)# 11:47:04 AM 02/13/07 Normal : Console version is SP1
> #(768)# 11:47:04 AM 02/13/07 Normal : Calling startlookforchangesthread.
> #(768)# 11:47:04 AM 02/13/07 Normal : InitialDisplayInfo sent
> #(768)# 11:47:04 AM 02/13/07 Normal : DRIVER to use is DARPAN
> #(768)# 11:47:04 AM 02/13/07 Normal : CallInitDrishti :
> ESC_START_VIEWING_DARPAN Successful
> #(768)# 11:47:04 AM 02/13/07 Normal : Came out after loading the driver
> #(768)# 11:47:04 AM 02/13/07 normal : Setting hook to cursor shapes is ok
> #(768)# 11:47:04 AM 02/13/07 Normal : Got WM_SWITCH_DESKTOP
> #(768)# 11:47:05 AM 02/13/07 Normal : Call to update desktop is made
> #(768)# 11:47:12 AM 02/13/07 Normal : RecvThread is returning
> #(768)# 11:47:12 AM 02/13/07 Normal : WaitThread : WaitForMultipleObjects
> returned. Closed thread is = 1
> #(768)# 11:47:12 AM 02/13/07 Normal : Periodic Check thread is returning
> #(768)# 11:47:12 AM 02/13/07 Normal : In desktop change thread terminate
> session is set
> #(768)# 11:47:12 AM 02/13/07 normal : Terminate session event is set in
> send
> thread
> #(768)# 11:47:12 AM 02/13/07 Normal : Close msg for visible window.
> Calling
> CloseConnection().
> #(768)# 11:47:12 AM 02/13/07 Normal : Clean up is going to start
> #(768)# 11:47:12 AM 02/13/07 Normal : LookforchangesThread returning
> #(768)# 11:47:12 AM 02/13/07 Normal : WallPaperThread is closed
> #(768)# 11:47:12 AM 02/13/07 normal : All the threads are closed normally
> #(768)# 11:47:12 AM 02/13/07 Normal : Call to update desktop is made
> #(768)# 11:47:12 AM 02/13/07 normal : RC session is completed successfully
> #(768)# 11:47:12 AM 02/13/07 Normal : CZenRmServer::RCRvThread:
> hAcceptThread Signals
> #(768)# 11:47:12 AM 02/13/07 Critical :
> RMAudit::Auditing.cpp:recordAuditLog() The audit record is corrupted.
> #(768)# 11:47:12 AM 02/13/07 Normal : RcRvThread: RcAgent.dll is
> successfully unloaded from memory
> #(768)# 11:47:12 AM 02/13/07 Normal : RcRvThread: Ict_Uc.dll is not
> unloaded
> from memory ...
> #(768)# 11:47:12 AM 02/13/07 Normal : RcRvThread: Ict_Uc.dll is not
> unloaded
> from memory and it is forcefully unloaded...
> #(768)# 11:47:12 AM 02/13/07 Normal : Darapan is Unloaded successfully
> #(768)# 11:47:12 AM 02/13/07 Normal : RMSessionFinished - Begin
>

I am a newer about LabVIEW.How can I realize a remote control in a Web brower.

"To transform your application into a remote laboratory, make sure the VI that you want to publish is loaded into LabVIEW memory. Next, select the Web Publishing Tool option from the Tools menu. This window is the main window for interactively creating and publishing your remote laboratory
The Web publishing tool will automatically load in the Document Title and VI Name text fields. As the sample image in Figure 6 illustrates, the Document Title, Text 1, and Text 2 are all text fields that you can use to customize the Web page created with the publishing tool.
The second step necessary to enable a remote laboratory is to select the Start Web Server button. When pressed, this button activates the built-in LabVIEW Web server, which will publish and control your front panel images from the Internet.
Once the Web server is activated, the actual HTML document needs to be created and saved so it can be accessed remotely. Clicking on Save to Disk places an HTML file called Document Title.htm into the LabVIEW file folder called WWW by default. Saving your Remote Panels HTML documents into this folder will ensure that the LabVIEW Web server can find them. Either keep the default name, or assign a new name and save the file. Once saved, a new panel entitled Document URL pops up with a message box containing the URL address of your enabled LabVIEW application.
Click on OK in the Document URL window and then click on Done in the Web Publishing Tool window. Your lab is now ready for remote visitors
Required Software
To operate a LabVIEW program using remote panels, it is necessary to have the free LabVIEW run-time engine installed on the client computer. When a remote viewer logs onto the lab with the appropriate URL address, the LabVIEW front panel will appear in the browser, or reroute the user to install the run-time engine from the National Instruments Web site.
Application Control
Once connected to the remote laboratory, the client connection will automatically be in a monitor state. If another client is controlling the remote laboratory, the user will be able to monitor the actions of the controlling client. To request control of the program, right click on the front panel and select Request Control. Once selected, one of two possible messages will appear. Either the user will be granted control (Control Granted), or the user will see a message indicating that control is currently granted to another user (Waiting for control: Either the server is locked or another client has control). If another client has control, the controlling client will be notified that control time has now become limited. Once the timeout occurs or the controlling client has released control, application control is automatically switched to the requesting client (Control Granted). Once the user has been granted control, all icons and controls will become active and running the LabVIEW application is exactly like running the application from the local environment.
Releasing Control
When the remote viewer either moves on to a different URL address or relinquishes control by right clicking and selecting (Release Control), or when the remote laboratory times out, the remote laboratory is available to the next visitor."
The above is what I read from a text of ni.com,
but I can not obtain the result.
Thanks a lot!
^^

Hi
I don't see which LV version you are using. It's important to know, that you need the FDS or PDS package of LV 6.1 to work with remote control. This feature is not supported in the LV base package of LV 6.1.
If you have LV 6.1 FDS or PDS, which of the described steps are not working?
Luca P.
Regards,
Luca

Remote control and windows XP SP2

I have been creating new images and noticed that when I install windows XP
service pack 2 that the remote control client fails to load up and I cannot
control the workstations. Before placing the service pack on,the remote
control agent on the system tray loads up, but disapears after service pack 2.
I have seen this on a vairety of different workstations and different
clients. We are currently using the Novell client 4.83.3.1 SP1 and a 4.9
client.
Has anyone come across this problem?
Glen

> I have been creating new images and noticed that when I install windows
XP
> service pack 2 that the remote control client fails to load up and I
cannot
> control the workstations. Before placing the service pack on,the remote
> control agent on the system tray loads up, but disapears after service
pack 2.
> I have seen this on a vairety of different workstations and different
> clients. We are currently using the Novell client 4.83.3.1 SP1 and a 4.9
> client.
>
> Has anyone come across this problem?
>
> Glen
>
thanx to Shawn Dakin for this solutions
1) Change the Windows Firewall/ICS service to manual
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\SharedAccess
String Value Start = 3
2) Force Windows Firewall/ICS service to start before Remote Management
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\Novell User Agent
Multi String Value DependOnService = SharedAccess
NOTE: DependOnService must also contain WM
3)Set Firewall Exceptions for wuser.exe
netsh firewall add portopening UDP 1761 ZENRC Enable
netsh firewall add portopening UDP 1762 ZENRC Enable
netsh firewall add allowedprogram c:\novell\zenrc\wuser32.exe ZenRC enable
NOTE We placed the netsh commands in the autoexec.bat of every WinXpSp2
machine.
This fixed the problems for us, and allows us to remote control even if
the user is not connected.
THIS WORKS WITH ZenWorks 3.2 ONLY

ZCM 11.2.3 Remote Control Issue

I have zcm 11.2.3 MU1 installed.. I just imaged a few windows 7 64 bit computers ... installed agent and novell client.. all seems to work just fine with them (ie policies, inventory etc) BUT I cannot remote control them..I Get a failed to connect to server when I try to remote control (both Ip address and DNS name).. I turned off the firewall and that made no difference.. anyone tell me where to look for logs to see why it is failing on these computers ??.. I can remote control other computers no problem

Originally Posted by roehmdo
thanks - the remote policy if definitely applied to these workstations... looking at the tid,, would these logs exist on the workstation or the server ?
It's all in the TID
Component Name: Remote Management
Enable Debugging:
Device being remoted:
Set agent logging to debug and above with zicon.
Stop “Novell ZENworks Remote Management powered by VNC” service either using cmd or services.msc
Windows workstation set:
Location: HKLM\Software\Novell\ZENworks\Remote Management\Agent
****Location: 10.3 and later: HKLM\Software\Novell\ZCM\Remote Management\Agent
Name: DebugMode
Type: DWORD
Data: 2
Location: HKLM\Software\Novell\ZENworks\Remote Management\Agent
****Location: 10.3 and later: HKLM\Software\Novell\ZCM\Remote Management\Agent
Name: DebugLevel
Type: DWORD
Data: decimal value 10 or hex value ' a'
Location for x64 Windows 7:
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Novell\ZCM \Remote Management\Agent
After the above registry changes, Restart “Novell ZENworks Remote Management powered by VNC” service either using cmd or services.msc
Device running the browser performing Remote Management:
In the Remote Management Dialog box, select "More Options" and check "Enable logging"
Log Locations:
Device being remoted:
Windows workstation:
%ZENWORKS_HOME%\logs\WinVnc.log
%ZENWORKS_HOME% \logs\LocalStore\zmd-messages.log
Windows Vista workstation:
%ZENWORKS_HOME%\logs\WinVncApp.log %ZENWORKS_HOME%\logs\WinVnc.log
%ZENWORKS_HOME% \logs\LocalStore\zmd-messages.log
Device running the browser performing Remote Management:
novell-zenworks-vncviewer.txt
location:
Internet Explorer 7 on W2003 or XP: Current user's desktop
Internet Explorer 7 on Vista: last directory browsed from IE 7
Firefox: Firefox directory, for example, C:\Program Files\Mozilla Firefox
From the server used for ZCC to RM:
loader-messages.log
services-messages.log
zcc.log
Thomas

Remote Control and Remote View Problem

Hi,
I work at a High School running Netware 6.0 SP5 and Zen works 4.01 ir7.
Remote Control and Remote View works great but I noticed one problem.
We have a logo of the school that is forced down on to the desktop when a
user logs in through group policies. This logo works perfect for the
desktop wall paper and loads every time a user logs in.
When I Remote Control or Remote View a computer the users desktop wall
paper turns from the logo being forced down through group policies to the
desktop to a blue desktop wall paper.
I would prefer the desktop wall paper staying the schools logo when I
Remote Control or Remote View because if the desktop wall paper changes to
the blue color I mentioned above when I Remote Control or Remote View the
users computer, they will know that someone is taking over their computer
which sometimes we dont want them knowing.
We have Windows 98SE computer running Novell Client 3.4 and we have some
computers running Windows XP Professional SP1 and Windows XP Professional
SP2 both running Novell Client 4.91 SP2.
The Remote Control and Remote View problem of the desktop wall paper
changing on the users computer occurs on all operating systems mentioned
above.
Is there a solution to my above problem? When Remote Controlling and
Remote Viewing someone's computer I don't want the desktop wall paper to
change.
Thanks!

Bpilon,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Remote control

I noticed my remote control was not working so replaced the battery... still doesn't work. Read the Apple support document for remotes, did everything mentioned relating to linking to my computer etc., still not working.
Got my digital camera to check that the infrared on the remote is working, and it does (can see the infrared flashing through the camera LCD at back) so must be something to do with the iMac itself.
According to the support document...therre should be a" "Disable remote control infrared receiver" checkbox in the Security pane of System Preferences" - however there is no such checkbox in my Security pane.
Interestingly, this problem seems to coincide with my installing an upgrade to iLife08 - could there be a link - has anyone got any other ideas please?

Dennis, thank you for your help.
I've tried to repair the disk permissions as suggested and pairing the remote with the iMac, but still not working. Also trying to open Front Row did not work.
So I went looking for Front Row on my machine and couldn't find it... so tried loading the Front Row update... and got this message - "This software update requires a Macintosh with a built-in infrared (IR) receiver running Mac OS X 10.4.5 or later."
I'm running 10.4.10 at the moment, so really don't know what's going on... this is looking more like something to do with me installing the new iLife?

How to load a image after getting it with a file chooser?

I'm still starting with JavaFX, and I simply would like to know how to load the image (e.g. png or jpg) that I selected using a FileChooser in the user interface. I can access the file normally within the code, but I'm still lost about how to load it appropriately. Every time I select a new image using the FileChooser, I should discard the previous one and consider the new one. My code is shown below:
import javafx.stage.Stage;
import javafx.scene.Scene;
import javafx.scene.shape.Rectangle;
import javafx.scene.paint.Color;
import javafx.scene.layout.HBox;
import javafx.scene.control.Button;
import javax.swing.JFileChooser;
import javafx.scene.image.ImageView;
import javafx.scene.image.Image;
var chooser: JFileChooser = new JFileChooser();
var image;
Stage {
    title: "Image"
    scene: Scene {
        width: 950
        height: 500
        content: [
            HBox {
                layoutX: 670
                layoutY: 18
                spacing: 10
                content: [
                    Button {
                        text: "Open"
                        action: function() {
                            if (JFileChooser.APPROVE_OPTION == chooser.showOpenDialog(null)) {
                                var imageFile = chooser.getSelectedFile();
                                println("{imageFile.getCanonicalFile()}");
                                image = Image{
                                    width: 640
                                    url:imageFile.getAbsolutePath()
            // Image area
            Rectangle {
                x: 10
                y: 10
                width: 640
                height: 480
                fill: Color.WHITE
            ImageView {
                x: 10
                y: 10
                image: bind image
}Thank you in advance for any suggestion to make it work. :)

As its name implies, the url param expect... an URL, not a file path!
So, use {color:#8000FF}url: imageFile.toURI().toURL(){color} instead.

How to dynamically load an Image into a TableView when its row/cell becomes visible?

Hi,
I am building an application that shows tables with large amounts of data containing columns that should display a thumbnail. However, this thumbnail is supposed to be loaded in the background lazily, when a row becomes visible because it is computationally too expensive to to this when the model data is loaded and typically not necessary to retrieve the thumbnail for all data that is in the table.
I have done the exact same thing in the past in a Swing application by doing this:
Whenever the model has changed or the vertical scrollbar has moved:
- Render a placeholder image in the custom cell renderer for this JTable if no image is available in the model object representing the corresponding row
- Compute the visible rows by using getVisibleRect and rowAtPoint methods in JTable
- Start a background thread that retrieves the image for the given rows and sets the resulting BufferedImage in a custom Model Object that was used in the TableModel (if not already there because of an earlier run)
- Fire a corresponding model change event in the EDT whenever an image has been retrieved in the background thread so the row is rendered again
Btw. the field in the model class holding the BufferedImage was a weak reference in this case so the memory can be reclaimed as needed by the application.
What is the best way to achieve this behaviour using a JFX TableView? I have so far failed to find anything in the API to retrieve the visible items/rows. Is there a completely different approach available/required that uses the Cell API? I fail to see it so far.
Thanks in advance for any hints here.

Here’s what I have tried so far:
I have defined a property in my model object that contains a weak reference to the image that is expensive to load. I have modeled that reference as an inner class to the object so I have a reference to its enclosing object. That is necessary because my cell factory otherwise has no access to the enclosing model object, which it needs to trigger loading the image in the background.
The remaining problems I have is, that I don’t have sufficient control over the loading process, i.e. I need to delay the loading process until scrolling has stopped and abort it as soon as the user starts scrolling again and the visible content changes. Imagine that loading an image for a table row (e.g. a thumbnail for a video) takes 200ms to load and a user quickly scrolls through a few hundred records and then stops. With my current set-up, the user has to wait for all loading processes that were triggered in the cell factories to finish until the thumbnails of the records they are looking at will appear (imagine an application like finder to be implemented like that, it would simply suck UX-wise). In my swing application a background thread that loads images for the visible records is triggered with a delay and stopped as soon as the visible content changes. This works well enough for a good user experience. I don’t see how I can do this based on the cell API. It is nice to have all this abstracted away but in this case I do not see how I can achieve the same user experience as in my swing application.
I also tried registering a change listener to the TreeCell’s visible property to make that control the image loading but I don’t seem to get any change events at all when I do that.
I must be missing something.

Confilicts with XP "Remote Desktop" and ZFD4 "Remote Control"

He have a similar problem like this. Some machines, after installing Zen4
agent, after first login, the WS reboot automatically every time.
He have discovered a conflit with display adapter ( Intel eXtreme graphics
2 ).
Resolution: With workstation at CTRL+ALT+DEL or password prompt, access
the registry of this machine with a remote admin WS. At the
HKLM\Software\Microsoft\Windows\Current Version\Run commands, find startup
tools from the display adapter, like HotKeysCmds -> C:\Windows\System32
\hkcmd.exe and remove them from registry.
Logon at the WS and if it run fine, reinstall the display adapter.
I hope this help you.
Regards,
BJ
> Current workstation Configuration - WinXP(SP1), Client32
> (483sp1),Enabled
> Microsoft Remote Desktop (Used to connect to machine via NAT at
> Firewall),
> ZFD4 at server. I installed ZFD4 management agent as local
> administrator
> with no problem. However on initial reboot, the machine would not
> boot
> normally and was stuck in a reboot loop. I was able to oot into safe
> mode
> however, unable to un-install the ZFD4 remote agent.
>
> 1) Is there some type of conflict between the two "Remote Control"
> applications.
>
> 2)How do I correct the current reboot loop.
>
> 3)What is the best scenario to remote control a desktop via VPN or
> NAT,
> keeping in mind that I may not have the Netware Client loaded on all
controlling workstations.
>
>
>

I'm not sure if Apple Remote can, but
Microsoft offers a free program called Remote Desktop Connection so you can do just that.
www.microsoft.com/mac

Remote control and MegaSky 580 (MS5580)

Hi,
i have the device with driver version AP v1.5.0.1 and latest patch for presto installed. watching tv works on one computer (1) but the remote control does not react.
On another older computer i tested(2), its the other way round. the remote control works, i can start the presto software with the red button, but then it crashes and presto can not start scanning because it can not find the device. strange, the ir-remote works but device not fount, he? anyway, this is not my pc, and i dont want do run the megasky on this one, but i just testet to see if the device is defective.
so, i asked at the msi support, but they said i have to ask the dealer. the dealer did not give any information but excanged the device for a new one. now i have the new device and meanwhile a new pc (3), but there is no difference: tv works but ir does not.
on pc (2) the new device and remote work but tv does not.
now i suspect there is a software fault.
so, asking the dealer for a 3rd device seems to make no sense.
what can i do before i buy another brand?
here the configurations i tested the mega sky with:
(1)
AsRock Mainboard 775VM800
Via P4M800 Chipset
Intel Celeron D 2,93GHz
ATI 9600Pro graphics
512MB DDR 333MHz
Windows XP SP2
logitech UltraX Optical Mouse (usb)
logitech Internet Pro Keyboard (usb)
(2)
some older board from msi?
Pentium 4 2,? GHz
geforce 4ti graphics
256MB ram
Windows XP SP2
unknown logitech mouse (usb)
noname keyboard (ps2)
(3)
AsRock Mainboard ALiveNF6G-DVI
NVidia NF-6100-430 Chipset
Athlon 64 X2 3800+
Onboard Geforce 6100 graphics
1024MB DDR2 800 ADATA ram
Windows XP SP2
logitech UltraX Optical Mouse (usb)
logitech Internet Pro Keyboard (usb)

i have done some more investigation with the remote control.
now i'm pretty sure, the sender/receiver work on any of the 3 pcs, but the drivers are not propperly setup or buggy on two of them. here are the things i have done:
in the presto software folder there is a \Driver\KbFilterDriver subfolder with REMOVE.exe in it. i ran it and after re-plugging in the device, there was a yellow exclamination mark at the dtv-receiver under human interface devices. it says the driver could not be loaded. now there was a button for using the "installed driver", that i used to install a microsoft standard hid keyboard driver. i was a little confused, but windows accepted this.
now i can open a notepad window, and every single key ot the remote control results in a character typed into notepad.
after pressing the buttons on the remote row by row, there are: o1abcdefgx2ijk
so what the hell is wrong with the GenesysLogic KbFilterDriver? i want to sit back and watch tv with the remote control in my hand! is that too much demanded? why does not the manufacturer respond on this problem? its obvioulsly their fault.

Remote control and MSI PC-DTV Mega Sky 580

Hello,
I bought one of these recently and initially had problems when installed. It would initially run fine but after I closed the program down and restarted it the PC would just reboot.
I was using the front USB ports so I moved it to the rear ports and removed and reinstalled the drivers/software. It runs just fine now and the quality of the picture superb. I've rerun the device over a few days and all seems okay. I appear to have all the available programs from the Sutton Coldfield transmitter although this morning I booted up and the screen was blank. I realised I had last looked at BBC4 and of course thats only a part time channel!
I've looked at the MSI site at the drivers/Presto PVR updates but I am not sure which of the four I should download and use. In fact as the device is working is there any advantage in doing this?
Lastly... I'm not sure if this is a problem or not but the remote control doesn't work. Reading through the forum I'm wondering if I have the wrong end of the stick and the remote only works with Microsofts MCE. I have Microsoft XP SP2. Does the Mega Sky 580 not have a built in IR sensor and am I wasting my time pointing the remote at it and swearing?
Microsoft XP SP2 with current updates.
2x300GB
1GB ram
Intel D820
Onboard graphics and sound
Dust and dog hair arranged attractively around the box!

Hi,
Okay I have the bundled Presto PVR software so the unit must be faulty. I thought that the remote control and bundled Presto PVR would only work if installed on a PC where the operating system was Media Centre Edition.
So the remote control and bundled Presto PVR should work if installed on a PC with Windows XP SP2?
It looks a bit like I'll have to get a different make. I tried to rescan the channels last night because I was missing UKTV History and now I cannot get BBC1,2,3,4 or radios 3,4,6,7. I get loads of duplicates though like 5 Q's 4 ITV3's. All this on the same aerial I was using yesterday.
I even tried it with an indoor/attic aerial that works nicely with my other freeview (set-top style not PC) boxes but no matter what I tried I just get the same duplicated list of a few channels. Even tried it with the indoor/attack aerial upside down, back to front! Same list of 63 channels but most duplicated.
They all work fine but I would prefer a complete set
I

Remote Control - Loading an Image

Similar Messages

Maybe you are looking for