Remote power management

I was just on the verge of ordering a WRVS440N small business router when I noticed that it does NOT seem to have a remote / timed power management feature / facility?
This is desired to save on equipment wear / power usage.
Can anyone confirm this and recommend an equivalent or better model that has this feature?
Replay ASAP would be appreciated.
Many thanks
A Powell

Don't know how much you will be able to configure using just snmp. Typically you would use Prime Infrastructure to schedule or push templates to WLC(s). Otherwise you would have to use CLI commands and script that.

Similar Messages

With Multi-Factor Authentication ENABLED how can a admin connect remotely to manage Office 365 with PowerShell

With Multi-Factor Authentication ENABLED how can office 365 admin connect remotely to manage Office 365 with Power-Shell ?
When I key-in my credentials, auth fails with invalid username and password ?
Does any know the procedure ?

This question was closed over a year ago. You will need to start a new question. You can post a link back here if you think it helps.
I also recommend asking in the O365 developers forum for how to do bulk license upgrades. You can use the answer here and just remove and then add the new license.
¯\_(ツ)_/¯

Access denied error while running opening remote power-shell session from one azure machine to another

We are trying to open a remote power-shell session from one azure machine to another azure machine and that is failing with the following error. Any ideas?
Observations: -
If the worker role is running under network service or local system, then it fails.
We emulated the same behavior from a stand-alone exe and that also failed when the exe was run under network service or local system.
If we run the same stand-alone exe from a user account, then it works.
Unhandled Exception: System.Management.Automation.Remoting.PSRemotingTransportException: Connecting to remote server sampleapprm.cloudapp.net failed with the following error message : Access is denied. For more information, see the about_Remote_Troubleshooting
Help topic.
   at System.Management.Automation.Runspaces.AsyncResult.EndInvoke()
   at System.Management.Automation.Runspaces.Internal.RunspacePoolInternal.EndOp
en(IAsyncResult asyncResult)
   at System.Management.Automation.Runspaces.Internal.RemoteRunspacePoolInternal
.Open()
   at System.Management.Automation.RemoteRunspace.Open()
   at ConsoleApplication2.Program.Main(String[] args)

Hi,
This error only show access is denied, and it is hard for me to deal with this issue, may be Windows Powershell forum or Windows Azure VM are good forums for you, could you give more details information to us for a better help if this issue
was related with windows Azure.
Best Regards
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Lost Beats Audio Control Panel, Windows Experience Index and HP Power Manager on fresh install...

HP Pavilion m6-1035dx, product B5S06UA#ABA
Please help! I installed a 240gb SanDisk Extreme SSD and a fresh install of Win 7 home premium 64-bit OEM. I did not reinstall the factory OS and all that goes along with it. I have managed to reinstall all drivers (it seems) but am having the following problems: 1) I have installed IDT HD Audio Driver sp56953 but it does not provide the Beats Audio control panel, any idea how to get it? 2) The Windows Experience Index will not provide a performance evaluation, something in the system is providing it with an error message when it attempts to rate the system and it stops. 3) I have installed HP Power Manager sp57398 and can bring up the control panel but the changes I indicate will not stay applied, when I bring up Power Manager again it show that no selections are made. I knew this fresh install was going to provide headaches, please help if you can. Thanks.

I suspect this may all be related to a common cause.
When updating the windows experience index, what is the error message you receive?
Has the video card driver been installed? It is necessary for the windows experience index to complete.
Also, ensure the HP Software Framework is installed. It is under the Software Solutions category.
You did a clean install of Windows 7. Has all the software and drivers for Windows 7 from HP been installed? Here is a link should you need it.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

BUG: Power Manager fails to autostart

Alright, this topic is a continuation of my conversation with Lenovo support on Twitter, as it has been a while and we were unable to resolve this problem.
Until recently I had Windows 7 x86 running perfectly normal with a number of ThinkVantage tools such as Power Manager, HDAPS protection, HotKey integration, etc. - all the bare necessities, though not the latest versions.
Recently I've formatted everything and installed Windows 7 SP1 x64. Immediately after installation I've installed the latest versions of Power Manager, etc. from Lenovo Support website (i.e. not through System Update). Upon installation, the Power Manager gave me this error:
Every time I rebooted my computer, the same thing showed up and the Power Gauge was not showing in the taskbar. After a bit of looking around, I have found that in the following registry entry: HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Run in the value rundll32 "C:\Program Files (x86)\ThinkPad\UTILIT~1\PWMTR64V.DLL",PwrMgrBkGndMonitor the quotes were missing. Once I put them in, the Power Gauge started to show up during start up, however the message did not disappear.
Then I tried installing the APS protection which gave me a couple of the very same messages during installation. When the installation finished, I tried running the APS protection from the Control Panel, but it crashed every time.
Highly dissatisfied with all this, I've formatted the hard drive again, installed the same version of Windows and installed the Power Manager the very minute it finished installing, to be sure no other applications intervene. The result was the same.
From @lenovo on Twitter I've received an advice to uninstall the Power Manager and try installing it from System Update, however the same error message prevents me from uninstalling the Power Manager. I have also tried using the System Update to install the HDAPS (which I haven't installed this time), but it failed.
So there's my story. Any help would be very appreciated, as never before have I had a single issue with Lenovo tools.
Thanks!
Solved!
Go to Solution.

All right, I've gone through some experiments in the VMWare. Installing my modified image and then the Power Manager gave the same errors I am experiencing. However, when I used the untouched image, everything worked fine.
So I would like to thank everyone who contributed to this topic and apologize to @Lenovo for taking their time with this issue.
Yet I am very interested in what it is with the modified image that makes the Power Manager installation use paths like C:\Program Files (x86)\... instead of C:\Progra~2 like it happens with the normal image, which I just verified comparing registry entries. And also why the ThinkVantage tools are the only ones affected by this.
But in any case, thanks to everyone again and I will accept this solution now.

Portege M800-107: Power Management & HDD Protection Utility questions!

Hi all,
I own a Toshiba Portege M800-107, I have recently installed windows 7 (ultimate edition), which enhanced my laptop capabilities. The only problems I face are:
1) The Power Management utility, where I have install the required drivers from the official page of Toshiba, the problem is that the Value Added package is installed without the power management. For now I over come the problem by using the power options offered by Windows 7.
2) The most important problem is the HDD Protection Utility which every time I try to install the driver from the official site, it stops the installation with the reason that this "hardware is not supported by this computer"
Apart those problems the laptop is working perfectly and faster.
If any one could assist me with my problems I would be very appreciated.

> 1) The Power Management utility, where I have install the required drivers from the official page of Toshiba, the problem is that the Value Added package is installed without the power management. For now I over come the problem by using the power options offered by Windows 7.
There is no special Power Saver tool for Win 7. The Value added package provides some additional options which you can find in Win 7/Vista power management.
Check this HowTo:
http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=41
> 2) The most important problem is the HDD Protection Utility which every time I try to install the driver from the official site, it stops the installation with the reason that this "hardware is not supported by this computer"
The HDD Protection Utility using the acceleration sensor built in the computer.
The point is that there are different M800 on the market and possibly your M800 does not support the acceleration sensor. This could be the reason why you cannot install this tool.

Windows 7 RTM x64 Power Manager and switchable graphics not working

Installed Windows 7 RTM x64 on my T400. After windows update and installing Lenovo's drivers, everything is accounted for. ATI graphics works fine, and I can see the Intel graphics on the shortcut menu. I just cannot manually switch to the built-in graphics, nor did I see the Power Manager. What do I need to do? I have installed the drivers for the power management, even though on the list of driver on lenovo's webpage it says it's only for SL models.
Help would be appreciated.
Specs:
T400
LED
ATI/Intel switchable graphics
4Gb

Have you installed the Power manager http://www-307.ibm.com/pc/support/site.wss/WIN7-BETA.html#powm ?
And after that, make sure you have installed the right driver (the one for switchable graphics): http://www-307.ibm.com/pc/support/site.wss/WIN7-BETA.html#m8xswitch
Hope that helps.
I also have Windows 7 Professional x64 on my T400 and everything works fine (i only uses programs and driver from here: http://www-307.ibm.com/pc/support/site.wss/WIN7-BETA.html
T400 2767-AG8
Windows 7 Professional 64bit

Remote update manager and ausst

Hello,
I try to set up automatic updates for all creative cloud applications in our company. The AUSST is already working and a web-directory exists, but there are still some problems I cannot solve yet.
1. Does the remote udpate manager also use the AdobeUpdater.Overrides? If not, how can I use our internal AUSST Web Server for the remote updates?
2. Which option in the Creative Cloud Packager creates the folder \ProgramData\Adobe\AAMUpdater\1.0\ ?
3. Where does the Adobe Update Manager save the .overrides-file I chose in the Adobe Update Manager? Does this file also apply for the Remote Update Manager?
4. Is there any way to change the extended configuration parameters for a package after the installation
Thanks and regards,
Tobias

Hi Tobias,
Please find the answers outlined below.
1. Does the remote update manager also use the AdobeUpdater.Overrides? If not, how can I use our internal AUSST Web Server for the remote updates?
Ans: Setup RUM with AUSST : Creative Cloud Help | Using Adobe Remote Update Manager
2. Which option in the Creative Cloud Packager creates the folder \ProgramData\Adobe\AAMUpdater\1.0\ ?
Ans : Creative cloud packager doesn't create this folder. this is being created while deploying the update payloads.
3. Where does the Adobe Update Manager save the .overrides-file I chose in the Adobe Update Manager? Does this file also apply for the Remote Update Manager?
Ans: Override.xml is being generated manually using Adobe update server setup tool. In case you install the package without setting up an update sever under package configuration, it generates AdobeUpdaterAdminPrefs.dat.
4. Is there any way to change the extended configuration parameters for a package after the installation
Ans : Package configuration can't be changed once created once created.
Hope this helps.
Let me know in case you would need any further clarification.
Thanks,
Ashish

Remote Update Manager on Yosemite doesn't start

Hi to all, I have recently updated my 15 iMac (year 2012) to Yosemite.
After the upgrade, the Adobe Remote Update Manager tool doesn't start, with an error 1.
In the console, I see these lines:
Any suggestions?
Many thanks

Same problem here on my wife's mid-2012 Macbook Air. Really annoying.

Remote Update Manager with AAMEE 2.1 deployments.

Hi,
I've noticed the AAMEE 3.1 Beta has some new options that integrate with Remote Update Manager and CS6 installation packages, that allows you disable updates, but still run them with Remote Update Manager. If I've deployed and Adobe CS5.5 package built with AAMEE 2.1, with the ability to install updates disabled, will I still be able to use Remote Update Manager to install updates to those deployments? Or will I need to continue to deploy them manually? If I want to deploy CS5.5 and use Remote Update Manager for updates, what settings should I be using in AAMEE 2.1 when I build my packages?
Thanks,
~Ted

Hi Ted,
RUM can also be used with CS5 & CS5.5 and by the sounds of it would fit in with your current configuration very well. If user's are non admins or you do not want each client pulling in there updates automatically then we would suggest turning off client updates in AAMEE and then using RUM.
Have you looked at setting up AUSST in your environment ? it is great to use in conjunction with RUM but you can of course just use RUM if you prefer.
Cheers
Karl
CS Enterprise Systems Engineer

Remote Update Manager missing exception apps

Hi all,
Can anyone explain to me why remote update manager or even the Update GUI does not include any of the exception deployed apps like Lightroom or Acrobat? I get users asking us to update these for us when they open the app as the pop up appears.
We have automated all the standard apps' updates via remote update manager but the cannot include the other exception ones. Can anyone help me with this one? I want to automate all the updates.
If it isn't implemented yet then I'd like it to be since we lock admin rights from our users for security reasons.
Thanks,
Josh.

Hi all,
Can anyone explain to me why remote update manager or even the Update GUI does not include any of the exception deployed apps like Lightroom or Acrobat? I get users asking us to update these for us when they open the app as the pop up appears.
We have automated all the standard apps' updates via remote update manager but the cannot include the other exception ones. Can anyone help me with this one? I want to automate all the updates.
If it isn't implemented yet then I'd like it to be since we lock admin rights from our users for security reasons.
Thanks,
Josh.

Remote Update Manager doesn't recognize applicable updates

Hi,
We have a script scheduled to run Remote Update Manager on one of our client machines. This machine is currently running OSX 10.8.5 and Adobe Creative Cloud. When looking at Creative Cloud directly, we can clearly see that there are updates available for our Adobe products. Remote Update Manager, however, does not recognize these updates and will therefore not automatically update. This prevents the user from working as they do not have access to administrative credentials used to update these applications.
I have included an example of the returned messages by Remote Update Manager. These logs are pulled as of this morning but, as you can see, still reflect an outdated entry of 10/17/13.
| UpdaterCore library initialized successfully.
10/17/13 09:48:24:600 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | **************************************************
10/17/13 09:48:24:600 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | Starting UpdaterCore CheckForUpdate...
10/17/13 09:48:25:186 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | CheckForUpdates completed successfully.
10/17/13 09:48:25:186 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | **************************************************
10/17/13 09:48:25:186 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | Starting UpdaterCore DownloadUpdates...
10/17/13 09:48:25:188 | [WARN] | | AAMEE | Utilities | RemoteUpdateManager | | | No new applicable Updates. Seems like all products are up-to-date.
10/17/13 09:48:25:188 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | **************************************************
10/17/13 09:48:25:189 |
I was wondering if you had any advice on the next steps to resolve.
Thanks,
Evan

Some links that may help
-Team Installer http://forums.adobe.com/thread/1363686?tstart=0
-http://helpx.adobe.com/creative-cloud/packager.html
http://forums.adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent

Remote Update Manager - Acrobat Pro

Hello everyone,
Please review this snippit from the Remote Update Manager (RUM) documentation.
Note: Remote Update Manager is meant only for a subsection of Adobe Desktop products. It can not be used for browser plug-ins such as Flash Player and for Adobe Reader, Acrobat Professional, and Adobe AIR application updates.
I ask the question... WHY?
Why, at the very least isn't Acrobat Pro part of the Adobe Update Server Setup Tool (AUSST) and RUM configuration?
I've finally gotten my Adobe udate server working and created a Scheduled Task to run the incremental update everyday. Perfect.
Now I'm implementing the override files on my client machines and creating a Scheduled Tasks to run the RemoteUpdateManager so that my users (as well as myself) do not have to worry about updating the Adobe programs... BUT... one of the programs that we use quite a bit, Acrobat Pro, is not part of this automated update scenario.
So, I'm left still updating Acrobat manually which almost, but not quite, defeats the purpose of AUSST & RUM.
Can anyone from Adobe tell me whether there are plans to add Acrobat Pro to the automated updating procedure mentioned above?
Please say yes.
I'm so close to being at the point where the Adobe updates are completely automated. Adding Acrobat Pro to the list would be like hitting a grand slam in the 9th inning to win the game.
Thanks in advance.

Markus, thank you for the information.
First, If Acrobat is not a creative product then it shouldn't be offered in the CC collection of programs.
Second, Things being the way they are - Acrobat being deployable with the CC programs - it should be updated the same way as the CC programs. It would just make it nice and tidy and dare I say efficient.
I will check out the link to the tools. Great, more software to download, install and configure.

Remote Update Manager does not exit

I'm trying to use Remote Update Manager to update PCs in our domain, but RemoteUpdateManager.exe does not exit, it just hangs. The log looks like this
11/04/14 15:19:27:374 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | ##################################################
11/04/14 15:19:27:374 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | ##################################################
11/04/14 15:19:27:374 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | Launching the RemoteUpdateManager...
11/04/14 15:19:27:374 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | RemoteUpdateManager version is : 1.7.0.25 (BuildVersion: 1.6; BuildDate: Tue Sep 02 2014 07:02:05 )
11/04/14 15:19:27:374 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | **************************************************
11/04/14 15:19:27:374 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | Initializing UpdaterCore Library...
11/04/14 15:19:27:484 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | UpdaterCore library initialized successfully.
11/04/14 15:19:27:484 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | **************************************************
11/04/14 15:19:27:484 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | Starting UpdaterCore CheckForUpdate...
11/04/14 15:19:29:730 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | CheckForUpdates completed successfully.
11/04/14 15:19:29:730 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | **************************************************
11/04/14 15:19:29:730 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | Starting UpdaterCore DownloadUpdates...
11/04/14 15:19:29:730 | [WARN] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | No new applicable Updates. Seems like all products are up-to-date.
11/04/14 15:19:29:730 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | **************************************************
What I'm not getting is the "Ending the RemoteUpdateManager Return Code (0)" part.
I'm using the latest AAMEE.
Are there any further things I can do to see why this is happening?

It seems to be related to the new Creative Cloud Packager (version 1.7).
All the packs I had made with 1.5 exited correctectly.
All the packs I have make with 1.7 dont exit.
And it seems to be impossible to go back to 1.5 ....
I think the problem might be with this line (from uob_csis but I get the exact same):
RemoteUpdateManager version is : 1.7.0.25 (BuildVersion: 1.6; BuildDate: Tue Sep 02 2014 07:02:05 )
There seems to be an incoherence between the version and the buildversion.

Remote update manager creative cloud app

Hello,
remote update manager won't update the creative cloud app for windows. Is it intended, that we need a separate tool to update the CC-App? Are there any manuals describing how to automatically update it?
Since users in out company don't have admin privileges, i'd like to do it with a tool such as the remote update manager - but RUM will update all other adobe applications, just not the creative cloud app...
Thanks and regards,
Tobias

Hi Ashubijalwan1,
just to make sure there is no misunderstanding:
All Creative Suite Apps are updated except for the app with the name "Adobe Creative Cloud".
When I use the Creative Cloud Packager and select solely the core components, "Adobe Creative Cloud" is a part of them. The program itself shows a message saying that an update is necessary, but RUM won't update "Adobe Creative Cloud".
Best regards,
Tobias

Remote power management

Similar Messages

Maybe you are looking for