RemoteApp planning

Just installed Windows Server 2012 R2 and I'm starting to plan for deployment of Remote Deskop Services. There will be only this one single server that hosts all the needed roles for RDS. I have few applications that I want to publish for users via RemoteApp.
I have internal users (Windows 7 PC's) and external users (Android and iOS tablets).
I have active directory domain named company.local and this RDS server is named rds01.company.local.
RDS installation seems to be quite easy, but I have some questions regarding to configuration.
I need certificate from public CA, but I'm unsure what names I need in this certificate. I'm planning to publish this RemoteApp service for outside users with name ra.company.com. Do I need some other names in the certificate? What are my options to deal
with internal name of server because ad domain is named .local and that is causing problems with public CA certificate.

Hi Sir,
Sorry for the delay .
>>I'm planning to publish this RemoteApp service for outside users with name ra.company.com.
Based on my understanding of different internal and public domain name , you may need to change the IIS setting.
Please configure beneath setting and check the difference.
IIS Manager> Sites> Default Web Site> RDWeb Pages> Application Settings> DefaultTSGateway
Enter the external name of your RDG server
Also try to uncheck the box “Bypass RD Gateway for Local address” under deployment properties of RD Gateway in logon method.
>>I need certificate from public CA, but I'm unsure what names I need in this certificate.
Please refer to following link regarding Certificate reuqirements for RDS :
http://blogs.technet.com/b/askperf/archive/2014/01/24/certificate-requirements-for-windows-2008-r2-and-windows-2012-remote-desktop-services.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Similar Messages

What is the difference between Azure RemoteApp Basic vs Standard Plans in terms of compute cores and memory?

So our customer has asked us to compare compare Amazon Workspace and Azure RemoteApp offerings for them to choose from. While looking at Amazon Workspace, it clealy defines bundles with specific CPU cores, memory and user storage. However, Azure RemoteApp
only specifies user storage and vaguely compares its basic vs. standard plans in terms of "task worker" vs. "information worker"
I tried looking up its documentation but couldn't find specific CPU cores that are dedicated per user in basic vs. standard plans. I have following questions:
Can anyone point me in the right direction or help understand how many CPU cores and memory are dedicated (or shared) per user in each plan?
Our customer would most likely need a "custom" image for their custom apps. Is it possible for us to choose specific CPU cores and memory for the users to be able to run their apps in azure remoteapp?
In case i am misunderstanding the basic difference between AWS workspace and Azure RemoteApp, i'd appreciate some help in understanding it as well.
Thanks!

Hi,
With Azure RemoteApp users see just the applications themselves, and the applications appear to be running on their local machine similar to other programs. With Workspaces users connect to a full desktop and launch applications within that.
1. Azure RemoteApp currently uses size A3 Virtual Machines, which have 4 vCPUs and 7GB RAM. Under Basic each VM can have a maximum of 16 users using it whereas under Standard each VM is limited to 10 users. The amount of CPU available
to a user depends on what the current demands are on the CPU at that moment from other users and system processes that may be on the server.
For example, say a user is logged on to a VM with 3 other users and the other users are idle (not consuming any CPU). At that moment the user could use all 4 vCPUs if a program they are running needed to. If a few moments later
the other 3 users all needed lots of CPU as well, then the first user would only have approximately 1 vCPU for their use. The process is dynamic and seeks to give each user their fair share of available CPU when there are multiple users demanding CPU.
Under the Standard plan a user will receive approximately a minimum of .4 vCPU assuming that the VM has the maximum number of users logged on and that all users are using as much CPU as possible at a given moment. Under the Basic plan the approximate
minimum would be .25 vCPU.
2. You cannot choose the specific number of cores and memory. What you can do is choose the Azure RemoteApp billing plan, which affects the user density of each VM as described above. If you need a lower density than Standard you
may contact support.
-TP

Can I save the Bandwidth of Azure RemoteApp Client ?

Can I save the Bandwidth of Azure RemoteApp Client ?
I want to use Azure RemoteApp in MOBILE.
MOBILE's bandwidth is under 1 Mbps like 256kbps, 128kbps.
And Some mobile network have a total network usage limit like 3GB/Month, 1GB/3day.
And More low price plan of mobile have more small limit like 2GB/Month, 1GB/Month.
The "Remote Desktop Connection" Application in windows destkop have "Exprience" Option for save bandwidth,
like "Font smoothing", "Visual styles", etc.
Regards,
Yoshihiro Kawabata

Hi Yoshihiro,
There is no option in the Azure RemoteApp client to manually reduce bandwidth consumption. What you could do is use a third-party bandwidth limiting program. For example, when you are connected via mobile wireless you could set it to limit max
bandwidth to 768Kbps, and when you are connected to non-metered connection set it to unlimited.
In your template image you could use group policy settings to potentially reduce bandwidth usage to a limited degree, but these settings would affect all users. Please take a look under Computer Configuration\ Administrative Templates\ Windows Components\
Remote Desktop Services\ Remote Desktop Service Environment. You should test each option in order to see if there is any benefit.
Please note that some options will not have any effect. For example, color depth will always be 32-bit, so there is no point in configuring it to limit to a lower value.
Also you can force certain options using custom rdp properties on the collection using Azure PowerShell, however, the net effect on bandwidth consumption of these options is limited. Again, this would apply to all users of the collection.
In the pre-RDP 8.0 days there were certain options that could make a big difference under the right circumstances. For instance, if you were only using a basic data-entry application you could set the color depth to 8-bit and connect at relatively
low resolution such as 1024x768 or 800x600 and the bandwidth consumption would be very low.
You can take certain manual steps to reduce bandwidth if you want. Things like reduce the local resolution of your PC screen, only have single monitor, do not use any rich content in your session, do not use any audio, do not transfer files, etc.
Thanks.
-TP

RemoteApp and Desktop Connections Error 0x800401F0 when updating RemoteApp connections from RDS webfeed

Environment:
Windows Server 2012 R2 with RDS roles installed.
Windows 8 clients
Issue:
The RDS Webfeed doesn't updated automatically. Instead, I get an error:
"An error occurred while updating this connection. Error code: 0x800401f0, 0x0"
I can perform a manual update in the control panel, but the users who will be using this on a regular basis are blocked from the control panel by a GPO. Also, I don't want end users to have to perform this update manually anyway.
I've included a screenshot of the issue for reference.
DuRand Bryant

MS Support has provided no more than the following replies to us for this case so far:
Based on your description, I suppose that the issue you are experiencing is:
The connection updates manually just fine, but it fails in nightly auto-updates. And setting up the connection does prompt for credentials
the first time after updating KB2857650, and it didn't before.
Based on my experience, this may be a known issue of KB2857650. I am trying my best to contact production team to confirm this information.
Currently, we recommended the following action plan on Windows 7 clients.
=======================================================================================================================================
Please uninstall hotfix of KB2857650 on all Windows 7 clients.
Note: we need to restart the clients after uninstalling the hotfix.
Then please click
Start, click
All Program, click
Accessories, and then click
Task Scheduler.
Open
Task Scheduler Library under Task Scheduler (local), and then browse to the following location:
---------------------------------------------------------------------------------------------------------------------------- Microsoft\Windows\RemoteApp and Desktop
Connections Update\
Open the subfolder that represents your user name.
Delete the following tasks:
Update connections
Report update status
Start Workspace Runtime at logon
Note
To delete a task, right-click the task, and then click
Delete.
After that, please recreate the connection.
Please test how the issue goes and let me know the results.
After you performed the steps above, if this issue persists, would you please collect the following information so that we can narrow down this issue?
And Later after I confirmed that I agree the issue seems to be a problem with
KB2857650 and then asking if a hotfix would be made available:
Thanks very much for you reply.
I totally understood how you feel about this. I am trying my best to contact production team to release new update to fix this issue. I will keep you updated about it. Since
we need to do a lot of tests about this issue to provide stable hotfix with our customers, it may be time-consuming to release the hotfix for this issue. Thanks for your understanding in advance.

Error while updating a plan

Hi,
I have encountered an error while updating a plan. While i update the uplan , the grid gets filled but it throws a message stating
"Maximum Number of Result Blocks has been reached"
Maximum number of Result Blocks has been reached.
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0xD4]
Error while processing the data for the step 'Grid'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Maximum number of Result Blocks has been reached.
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0xD4]
Error while processing the data for the step 'Grid'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Update of Plan "deposittest created 7/19/2007 5:11:50 PM" failed.
[Oracle BAM Enterprise Link error code: PlanMgr -- 0x1, PlanMgr -- 0xD5]
The data updation stops after the row count 49900.
Please help to resolve this error .
Thanks in advance.
Regards,
Lathika

Hi,
in BAM-Administrator you should rraise Parameter "MaxResultBlocks".
BAM originaly is al licensed Software from Group1 named "Sagent Data Flow".
This may help searching the web.
Greetz,
GOI

Data Back Up Plan

Hi,
My internal hard drive, 320 GB, 'fully loaded', on my 2 year old imac crashed 10 days ago.
Since I had the extended warranty, the 'local' Apple store replaced the internal drive within hours
at no charge and even loaded Snow Leopard and iLife. With a well updated TimeMachine on an external hard drive I was back working at my imac the next day. When I realized after the crash that my precious 250 GB of pictures in Adobe Lightroom and iPhoto, along with a few videos were saved on just one older Maxtor external hard drive, it made me think about a more solid back up procedure.
The idea now is to move all big volume files to one or more external hard drives.
In the meantime I have transfered the iPhoto and Lightroom files to an external hard drive (WD MyBook II, 2x1 TB in RAID 1), which gives me the first layer of back up: http://www.bhphotovideo.com/c/product/552322-REG/WesternDigital_WDH2Q20000N_2TB_My_BookStudio.html
In a second step I am planning on making a clone (with SuperDuper or CarbonCopy) of the internal hard drive (mainly operating systems and applications) and the external hard drive (all big data files) on one additional external hard drive, i.e. OWC Mercury Elite AL Pro Raid 0, 2 TB http://eshop.macsales.com/item/Other%20World%20Computing/ME8Q7T20GB64/
I am looking for advise here:
Do SuperDuper or CarbonCopy (I only know the names from the discussion forums) allow me to make a clone from 2 separate hard drives
Would it be good practice to create a large clone of ultimately 2 TB with ALL files or wouldn't it be better to make 2 clones , one of the internal and one of the external drive.
TimeMachine had helped me to get back to work quickly after the crash. I expect to fill the WD 1TB drive rather quickly. Where should I plan on using Time Machine in my new back up plan?
Would appreciate comments and advise.

reckling wrote:
Do SuperDuper or CarbonCopy (I only know the names from the discussion forums) allow me to make a clone from 2 separate hard drives
No. A clone is of your boot volume only. But those apps can make separate backups of multiple drives, either to multiple drives or to separate partitions on the same drive.
Would it be good practice to create a large clone of ultimately 2 TB with ALL files or wouldn't it be better to make 2 clones , one of the internal and one of the external drive.
2 is not only better, but your only option with CCC or SD.
TimeMachine had helped me to get back to work quickly after the crash. I expect to fill the WD 1TB drive rather quickly. Where should I plan on using Time Machine in my new back up plan?
There is no "right" answer, just a number of possibilities. Some thoughts:
You could use TIme Machine to back up both your internal HD and the WD set to the OWC, if it's at least twice the size of the data on both. It looks like it can be configured as a +Concatenated RAID set+ (both drives into a single 2 TB volume), so that should work well.
Or use TM to back up your OSX drive, and CCC or SD to back-up the media drive.
The CCC or SD backups usually aren't practical to run more than once a day, so consider them your "secondary" backups.
Also strongly consider getting something off-site (safe deposit box, workplace, relative's house, etc.), so you're also protected against fire, flood, theft, direct lightning strike on your power lines. Portable external HDs are great for that. Some things may even be appropriate to take to DVDs.
The problem with that is, there aren't many portables over about 640 GB (LaCie has a 1 TB for either $300 or $400: http://www.lacie.com/us/products/product.htm?pid=11357).
CCC is donationware, so you can use it free for a while. If you decide to keep it, send them some $$ so they can keep it up to date. SD has a free version, but to do updates (rather than a full replacement) or automatic scheduling, you need the paid version (about $30). Either is available via Google, VersionTracker.com, or MacUpdate.com.

BOM is not getting displayed in case of centralized planning plant.

Dear All,
there are 2 plants for which we have centralized planning. the users have created Equipment BOM for the two plants. but in case of the second plant for which the planning plant is different from the maintenance plant, the BOM is not getting displayed in the Maintenance Order (i.e. in the components tab).
kindly through some light on it. whether i have to do some settings for it.
Regards,
Ritesh Kapoor

Hi,
Yes while using IH01, i have ticked the BOM explosion option, but when i am giving the plant there then only it is displaying the BOM of that equipment.
Also when i am creating an order for the same equipment, then it does not displays the BOm & shows the message which i have written in my previous mail.
Ritesh

Pension plans in portal

Hi,
We have pension plans and the employees should be able to change the data anytime.
Open enrollment is for one month only and in that dental,medical,life plans are configured But only pension plans should exists for employees all time in portal.
Can anyone suggest me how to solve this issue
Thanks,
Usha

closed

Pension Plans

Hi,
We have pension plans.Our Customer requirement is that to change the pension plans by an employee at any time without any time restriction.
But the open enrollment option is for only 1 month in a year.
Can anyone suggest how I can solve this issue so that employee can only change pension plans at any time.
Thanks,
Usha

closed

Report for Planned vs Purchase Order(Qty and rate)

Hi
I have the following issue. My client is raising Purchasing requisition and Purchase Orders in Me51N and ME21n respectively. The Project Structure is used only to plan the quantities and rates whereas no PR is released from it. But the components are attached. Now if i make use of the code CN52N, i am getting the planned quantity and unit rate for the planned value whereas no Purchase requisition number or purchase order number is updated in it.
My requirement is that both planned quantity, rate along with Purchase order quantity and rate should be available in a report.
1. Is there any setting that we can make so that the details are updated in cn52N (or)
2. is there any other report with those details (or)
3. Should that be achived only through ABAP.
Please suggest.
Raghav

There are a few reports that you can use to display STO requisitions and orders, by supplying plant, material, or MD04 like was mentioned.
The only thing that you don't have in a report is the link to the production order. In SAP in a MTS situation there's no fixed link (pegging) between the requirement (STO) and the supply (prod Ord).
You can view the pegging dynamically, for example in MD04.
Edited by: Mario Adler on Oct 27, 2011 12:13 PM

A/P & Consignment data pull to Planning Cube.....

I put this in "BC & Extractors" section, but did not get any response.....
Need couple of clarifications (brief background is provided.....):
1. We do DELTA extractions using 0FI_AP_3 adn 0FI_AR_4 to a base cube which includes both 'Open' and 'Cleared'
items. From this cube we do a DELTA load to a Planning Cube on a DAILY basis. We filter the data on Company Code
and 'Item Status' (OnlyOPEN Items) for Planning purposes. The key figure pulled to Planning Cube is '0DEB_CRE_DC'.
The bsae cube has data at Line Item Document level, where as the planning cube is only at Customer & Vendor level.
The question is - Will this Daily DELTA to Planning cube with filter on Open Item bring correct key figure? For example,
if the status of one of the items pulled as OPEN in earlier Delta changes to "CLEARED" the subsequent day, will the Key
Figure reflect the changes and show correct value? Is there any impact on the key figure due to the filter on Open Item?
My thinking is the key figure 0DEB_DRE_DC will reflect he correct number (adjsuted) since it is a summated key figure.
I could be totally wrong and want to understand this with comments from experts.
2. Has anyone worked with pulling Consignment (SMI) data into Planning cube? We pull this data using a generic extractor
from a SAP table "RKWA" with some logic. Since I pull A/P data that contains SMI & Non-SMI transactions. To avoid
Double Counting, how can I avoid bringing in the SMI transactions from A/P? There is no flag to diffferentiate the SMI /
Non-SMI transactions....
I am hoping someone has worked in these area to offer expert comments/ recommendations.
Thanks.. Shaun
Please post one question only once
Edited by: Vikram Srivastava on Aug 13, 2010 1:02 PM

Hello Lee,
For your first question as you are using the Filter on the status of the record,
lets say today the status is OPen and as a part of the filter the Delta will be able to pick this record as the status is OPen but if the status is changed to Closed tomorrow then this record will be completely ignored and hence in the next level target you will not have the right status at all.
So you need to plan your filters accordingly.
Hope this helps.
Thanks
Murali

MRP - Auto creation of del schedule lines based on planned delivery time

Hi,
We have activated MRP (type PD) where Purchase requiesition is auto created by system for requirement quantity. We require to optimize delivery schedule in such a way that entire PR quantity is broken into various delivery schedule based on planned delivery time and requirement. Scenario can be further explained with following example.
Material Requirement for a month is say 1,25,000 units
Closing Stock say 25,000 units
PR Generated by system for 1,00,000 units. The entire quantity is schdulled with only one delivery schedule line as per planned delivery time.
The requirement is to generate multiple delivery schedule lines automatically in Purchase requisition based on planned delivery time so that Purchase orders can be placed with system generated delivery schedule lines.
How can it be achieved ?
Regards,
Nirav Kinkhabwala

Nirav,
This subject has been discussed repeatedly in this and other forums. I must assume that you overlooked the rules of engagement, which state that you should first search the forums and other public sites, before posting questions here.
Standard SAP MRP cannot be made to generate multiple items in a Purchase requisition. The functionality you seek is usually achieved when converting purchase reqs to Purchase orders, where many single purchase reqs can be adopted into a single Purchase order.
You also might want to investigate use of Vendor Scheduling agreements.
Best Regards,
DB49

Can I merge several different Verizon plans (different family members each have own plans) into one plan (i.e. can I take over all their lines), if all lines on all plans are on Edge?

I was originally told by Verizon that if I joined, I can eventually take over the lines of various family members. Now that I've joined, and my family members all upgraded their phones and are on Edge, Verizon is telling us that we can't merge into one plan (because Edge lines can't be transferred to another account).
Is this true, and, if so, what is my recourse since I was lied to.

Well, yes and no (as far as being lied to). I asked on several occasions (I have the chat transcripts to prove it) if there would be any issue if the lines were all already on Edge, and was told each time that under no circumstances would there be any issue. The latest being today (I know it's after the fact, but I wanted proof that this is what the chat people are saying). I asked "I have currently have an account with 3 phones on Edge. My brother and his wife, and my parents, also have plans all on Edge. I would like to 'take over' their lines. I want to make sure there is no issue with the Edge plan and that I can simply 'take over' their lines with no problems." I was told "Yes. That would be correct." Again, this is what I was told in the past as well (my original post didn't make clear the timing of the chats and upgrades to Edge..). Every time I chatted I mentioned that the accounts were going to be on Edge or (later on) were already on Edge. Even before my family members upgraded to Edge, not one single chat or phone representative (and my brother asked the same thing in a store) mentioned NOT to upgrade to Edge because it couldn't be transferred. Everyone just said yep, no problem. The ONLY reason I even joined Verizon (I was on Straight Talk) was because of the More Everything and Edge plans (we wanted a family plan with 6 people and over 10GB so we'd each save $25/line). Otherwise I never would have joined Verizon and my family wouldn't have upgraded either.

How do I add family members to my plan?

I have an existing Verizon Wireless account. I'd like to add my girlfriend and my son to my plan. Can't seem to find info on how to add them, or what the acual cost will be per month. And the "live chat" button seems like it is perpetually unable to function. Getting frustrated.

Search for Assumption of Liability. That's what you want to do to add them if they are already Verizon Wireless customers. If they are on another carrier, then you would be adding the appropriate number of lines to your account and porting the existing numbers in.

How to port a number from a Family Share plan?

This is my situation. I am the Account Owner on a Family Share plan with 2 lines. My husband is an Account Manager. I know I need to do an Assumption of Liability to make my husband the Account Owner and he will be able to keep his number and change his plan. I believe my number would then be a 2nd line on his account. I then want to port my number to an MVNO Prepaid service. Can I do this and keep my number and not affect my husbands service with Verizon? We have had our numbers for years and do not want to lose them. Our contract date is ending in 3 weeks and I will be waiting until we are month to month before porting out my number.

Nope makes no difference. He will tell Verizon Wireless he wants the account and the will pay the monthly charges. You then tell Verizon its OK to give the account and line etc. to him.
In certain cases when the run the credit check on the other person there may be a deposit required to have that service transferred.
Good Luck

RemoteApp planning

Similar Messages

Maybe you are looking for