RemoteApp Server Name Setting in Server 2012
Hi all,
we are using RD Web Access with IE 10 to provide our windows application to the users. The server is running windows server 2008 R2.
Now we are installing a new Server 2012.
In Server 2008 R2 it is possible to define the server name for the remoteapp clients in the remoteapp-manager (e.g. "test.de").
Where is this defined in Server 2012?
Thanks a lot in advance
Ulrich Schumacher
Hi,
You may download the cmdlet below to your RD Connection Broker server and use it to change the name:
Change published FQDN for Server 2012 or 2012 R2 RDS Deployment
http://gallery.technet.microsoft.com/Change-published-FQDN-for-2a029b80
-TP
Similar Messages
-
Remoteapp Server 2012 std drawing issues
Hello!
We are hosting an application trough Remoteapp on Server 2012 std. We have been struggling with a screen drawing issue where for example text in a textbox does not appear unless the textbox is clicked or borders of boxes are hidden until moving mouse over
them. Running the application trough full rdp session works perfectly. Our client machines are running on Windows 7 with latest updates.
We have tried changing some remoteFX settings but nothing seems to be working. Does anybody have solution or ideas what might work for the described issue?
ThanksHi,
Thank you for posting in Windows Server Forum.
Any furhter update for your case. Did you check with manufacture of your application, is this supported as RemoteApp?
As test what happens when you publish paint or notepad as RemoteApp, can you work easily with that.
Thanks.
Dharmesh Solanki
TechNet Community Support -
Set up Search Service App For SharePoint server 2013 on Windows server 2012 R2 not working
Hi all,
I installed SharePoint server 2013 on Windows server 2012 R2 using VirtualBox. I created a DC(domain controller) server with a domain set up on one VM and it has SQL server 2012 SP1 installed. Then SharePoint 2013 on another VM was set up to access
the DC server. Everything seems working except Search Service App which cannot be sucessfully set up. Creation process for Search service app says Successful and 4 search databases were created and look fine. But when I navigate to search service app
admin page, it gives error info:
System status: The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component '386f2cd6-47ca-4b3a-aeb5-d9116772ef16' in search application 'Search Service Application 1' is in
a good state and try again.
Search Application Topology: Unable to retrieve topology component health states. This may be because the admin component is not up and running.
From event viewer, I see following errors:
(1) Error From source: SharePoint Server
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance
(b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The object you are trying to create already exists. Try again using a different name.
Technical Support Details:
System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean
isAdministrationServiceJob)
(2) Error From source: SharePoint Server Search
Could not access the Search database. A generic error occurred while trying to access the database to obtain the schema version info.
Context: Application '386f2cd6-47ca-4b3a-aeb5-d9116772ef16'
(3) Warning from source: SharePoint Server Search
A database error occurred. Source: .Net SqlClient Data Provider Code: 8169 occurred 0 time(s) Description: Error ordinal: 1 Message:
Conversion failed when converting from a character string to uniqueidentifier., Class: 16, Number: 8169, State: 2 at
System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
(4) Error From source: SharePoint Server
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance
(b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have been upgraded.
Technical Support Details:
System.Runtime.InteropServices.COMException (0xC0041235): The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have
been upgraded.
Since separate DC server and SharePoint server do not work, I installed SharePoint 2013 on DC server ( so DC server has everything on it now ) but it gives exactly same result. Later I installed SharePoint 2013 SP1 and still have the same problem with Search
Service app. I spent two weeks tried all suggestions available from Web and Google but SharePoint Search Service simply does not work. Config and other databases work but why Search Service has this issue seemingly related to search DB.
Could anybody please help out? You deserve a top SharePoint consultant award if you could find a solution. I am so frustrated and so tired by this issue. This seems also to be a SP set up issue.
Thanks a lot.Using new Search Service App wizard to create SSA is always a success. I could delete existing SSA and recreate it and no problem. It says successful but when I open Search Admin page from CA, it gives me errors as mentioned.
Now I used the following PS script for creating SSA from Max Mercher, but it stays at the last setps in following script:
Add-PsSnapin Microsoft.SharePoint.PowerShell -ErrorAction SilentlyContinue
$IndexLocation = "C:\Search" #Location must be empty, will be deleted during the process!
$SearchAppPoolName = "SSAPool"
$SearchAppPoolAccountName = "mydomain\admin"
$SearchServiceName = "SSA"
$SearchServiceProxyName = "SSA Proxy"
$DatabaseServer = "W12R2DC1"
$DatabaseName = "SSA"
$spAppPool = Get-SPServiceApplicationPool -Identity $SearchAppPoolName -ErrorAction SilentlyContinue
if (!$spAppPool)
$spAppPool = New-SPServiceApplicationPool -Name $SearchAppPoolName -Account $SearchAppPoolAccountName -Verbose
$ServiceApplication = Get-SPEnterpriseSearchServiceApplication -Identity $SearchServiceName -ErrorAction SilentlyContinue
if (!$ServiceApplication)
# process stays at the following step forever, already one hour now.
$ServiceApplication = New-SPEnterpriseSearchServiceApplication -Name $SearchServiceName -ApplicationPool $spAppPool.Name -DatabaseServer $DatabaseServer -DatabaseName $DatabaseName
Account mydomain\admin is an farm managed account, domain admin account, in WG_ADMIN role, It is in all SQL server roles and is DBO. I see search DBs are already on SQL server. From Event viewer, I got following errors in sequence:
(1) Crawler:Content Plugin under source Crawler:Content Plugin
Content Plugin can not be initialized - list of CSS addresses is not set.
(2) Warning for SharePoint Server Search
A database error occurred. Source: .Net SqlClient Data Provider Code: 8169 occurred 0 time(s) Description: Error ordinal: 1 Message: Conversion failed when converting from a character string to uniqueidentifier., Class: 16, Number: 8169, State: 2
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
(3) Error for SharePoint Server Search
Could not access the Search database. A generic error occurred while trying to access the database to obtain the schema version info.
Context: Application 'cbc5a055-996b-44a7-9cbc-404322f9cfdf'
(4) Error for SharePoint Server
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have been upgraded.
(5) Error Shared Services for SharePoint Server Search
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The object you are trying to create already exists. Try again using a different name.
Technical Support Details:
System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob
Above errors keep being generated. Last step for SSA creation stay there forever. Any clue what is really going on? Thanks. -
Server 2012 - Can't access external website from internal domain with same name. Tried everything.
Hello All.
I have read loads of forums and tried numerous fixes and configurations, but nothing seems to work and I am extremely frustrated at this point.
I have a client where I setup Server 2012 Standard with Exchange 2013. After reading best practice documentation for DNS naming and reasons not to use ".LOCAL" I opted to use ".com.na" in which case the Internal Domain Name and Internet
Website now has the same name.
When attempting to open the extarnal website eg. "www.company.com.na" from a client PC within the internal "company.com.na" Domain, I keep getting error "403 - Forbidden: Access is denied. You do not have permission to view this
directory or page using the credentials that you supplied."
I should also mention, the website is hosted by an ISP and not locally.
I added a "www" Host record in the Forward Lookup Zone, I have added the url and ip address to the Hosts file on a client pc (Windows 7) and even tried setting up Split-Brains DNS. Nothing seems to work.
Running a Tracert takes me to the correct public ip address of the website, but I keep getting this 403 error.
I am so sick and tired of this issue that iI am at the point of backing up the Exchange and re-rolling the entire server with the ".local" DNS domain name. I have a mirror setup in a VMWare environment and simply using "rendom" to rename
the domain seems to cause new issues with Exchange connectivity.
Any pointers and help will be greatly appreciated.
Thanks in advance.
Hentie LootsI opted to use ".com.na" in which case the Internal Domain Name and Internet Website
now has the same name.
This ends up with a split-DNS stup for internal and external resolution which requires extra administration tasks and attention from the administrators.
When attempting to open the extarnal website eg. "www.company.com.na" from a client PC within the internal "company.com.na" Domain, I keep getting error "403 - Forbidden: Access is denied. You do not have permission to view
this directory or page using the credentials that you supplied."
I should also mention, the website is hosted by an ISP and not locally.
I added a "www" Host record in the Forward Lookup Zone, I have added the url and ip address to the Hosts file on a client pc (Windows 7) and even tried setting up Split-Brains DNS. Nothing seems to work.
Running a Tracert takes me to the correct public ip address of the website, but I keep getting this 403 error.
This means that you are able to reach the Website but it is responding with the access denied error message. That should be checked on the middleware level so if this is IIS running then I would recommend asking them in IIS forum: http://forums.iis.net/
If this is a Website that is completely managed by your ISP then I would recommend checking with them.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
Hi all,
I used the following code to create a new Database (ScottChangDB) and a new Table (marvel) in my SQL Server 2012 Management Studio (SSMS2012) successfully:
-- ScottChangDB.sql saved in C://Documents/SQL Server XQuery_MacLochlainns Weblog_code
-- 14 April 2015 09:15 AM
USE master
IF EXISTS
(SELECT 1
FROM sys.databases
WHERE name = 'ScottChangDB')
DROP DATABASE ScottChangDB
GO
CREATE DATABASE ScottChangDB
GO
USE ScottChangDB
CREATE TABLE [dbo].[marvel] (
[avenger_name] [char] (30) NULL, [ID] INT NULL)
INSERT INTO marvel
(avenger_name,ID)
VALUES
('Hulk', 1),
('Iron Man', 2),
('Black Widow', 3),
('Thor', 4),
('Captain America', 5),
('Hawkeye', 6),
('Winter Soldier', 7),
('Iron Patriot', 8);
SELECT avenger_name FROM marvel ORDER BY ID For XML PATH('')
DECLARE @x XML
SELECT @x=(SELECT avenger_name FROM marvel ORDER BY ID FOR XML PATH('Marvel'))--,ROOT('root'))
SELECT
person.value('Marvel[4]', 'varchar(100)') AS NAME
FROM @x.nodes('.') AS Tbl(person)
ORDER BY NAME DESC
--Or if you want the completed element
SELECT @x.query('/Marvel[4]/avenger_name')
DROP TABLE [marvel]
Now I am trying to create my first XML Schema Collection to do the Validation on the Field Name (Column Title) of the "marvel" Table. I have studied Chapter 4 XML SCHEMA COLLECTIONS of the book "Pro SQL Server 2008 XML" written by
Michael Coles (published by Apress) and some beginning pages of XQuery Language Reference, SQL Server 2012 Books ONline (published by Microsoft). I mimicked Coles' Listing 04-05 and I wanted to execute the following first-drafted sql in
my SSMS2012:
-- Reference [Scott Chang modified Listing04-05.sql of Pro SQL Server 2008 XML by Michael Coles (Apress)]
-- [shcColes04-05.sql saved in C:\\Documents\XML_SQL_Server2008_code_Coles_Apress]
-- [executed: 2 April 2015 15:04 PM]
-- shcXMLschemaTableValidate1.sql in ScottChangDB of SQL Server 2012 Management Studio (SSMS2012)
-- saved in C:\Documents\XQuery-SQLServer2012
tried to run: 15 April 2015 ??? AM
USE ScottChangDB;
GO
CREATE XML SCHEMA COLLECTION dbo. ComplexTestSchemaCollection_all
AS
N'<?xml version="1.0"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<xsd:element name="marvel">
<xsd:complexType>
<xsd:all>
<xsd:element name="avenger_name" />
<xsd:element name="ID" />
</xsd:all>
</xsd:complexType>
</xsd:element>
</xsd:schema>';
GO
DECLARE @x XML (dbo. ComplexTestSchemaCollection_all);
SET @x = N'<?xml version="1.0"?>
<marvel>
<avenger_name>Thor</name>
<ID>4</ID>
</marvel>';
SELECT @x;
GO
DROP XML SCHEMA COLLECTION dbo.ComplexTestSchemaCollection_all;
GO
I feel that drafted sql is very shaky and it needs the SQL Server XML experts to modify to make it work for me. Please kindly help, exam the coding of my shcXMLTableValidate1.sql and modify it to work.
Thanks in advance,
Scott ChangHi Scott,
2) Yes, FOR XML PATH clause converts relational data to XML format with a specific structure for the "marvel" Table. Regarding validate all the avenger_names, please see below
sample.
DECLARE @x XML
SELECT @x=(SELECT ID ,avenger_name FROM marvel FOR XML PATH('Marvel'))
SELECT @x
SELECT
n.value('avenger_name[1]','VARCHAR(99)') avenger_name,
n.value('ID[1]','INT') ID
FROM @x.nodes('//Marvel') Tab(n)
WHERE n.value('ID[1]','INT') = 1 -- specify the ID here
--FOR XML PATH('Marvel') --uncommented this line if you want the result as element type
3)i.check the xml schema content
--find xml schema collection
SELECT ss.name,xsc.name collection_name FROM sys.xml_schema_collections xsc JOIN sys.schemas ss ON xsc.schema_id= ss.schema_id
select * from sys.schemas
--check the schema content,use the name,collection_name from the above query
SELECT xml_schema_namespace(N'name',N'collection_name')
3)ii. View can be viewed as virtual table. Use a view to list the XML schema content.
CREATE VIEW XSDContentView
AS
SELECT ss.name,xsc.name collection_name,cat.content
FROM sys.xml_schema_collections xsc JOIN sys.schemas ss ON xsc.schema_id= ss.schema_id
CROSS APPLY(
SELECT xml_schema_namespace(ss.name,xsc.name) AS content
) AS cat
WHERE xsc.name<>'sys'
GO
SELECT * FROM XSDContentView
By the way, it would be appreciated if you can spread your questions into posts. For any question, feel free to let me know.
Eric Zhang
TechNet Community Support -
Server 2012 R2 RDS Personal Collection -reuse VM names after a partial job failure
I am currently testing RDS on server 2012 R2, and as part of the test I have built and rebuilt multiple collections of VMs. I have noticed that when creating a new JOB to build a personal collection, sometimes I get VM build failures on one host. The build
failures are usually due to a networking issue, which I then resolve, but when I go to add/create the VMs that failed, the name of the VMs increment from the last VM, and they don't re-use the failed names. I want to be able to reuse/build the VMs that
failed.
eg.
VM-01, VM-02, VM-03 - On HOST-01 all work
VM-04, VM-05, VM-06 - On HOST-02 fail
VM-07, VM-08, VM-09 - On HOST-03 all work
So on this example, when I re-run the job to build the missing/failed VMs, it would build VM-10, VM-11, VM-12 on HOST-02.
Is there a way to reset, or reuse the failed VM names, in the example above that would be VM-04, VM-05, and VM-06?
ThanksHi,
Thank you for posting in Windows Server Forum.
For a try you can use powershell command for RD VDI infrastructure.
New-RDVirtualDesktopCollection -CollectionName "ITCamp" -PooledManaged -StorageType CentralSmbShareStorage -VirtualDesktopAllocation 5 -VirtualDesktopTemplateHostServer $VHost -VirtualDesktopTemplateName $VDITemplateVM -ConnectionBroker $RDBroker -Domain “contoso.com”
-Force -MaxUserProfileDiskSizeGB 40 -CentralStoragePath”\\fileserver1\NormalVMs” -VirtualDesktopNamePrefix "ITC" -OU “VDICampUsers” -UserProfileDiskPath \\fileserver1\NormalProfiles
More information.
Lab Ops 7 – Setting up a pooled VDI collection in Windows Server 2012 R2
http://blogs.technet.com/b/andrew/archive/2013/10/28/lab-ops-4-windows-8-1-windows-2012r2-vdi.aspx
Also check that when setting up RDS, there needs to be a Physical NIC with IP for the creation of a RDS vSwitch. If this vswitch does not exist, the creation of the MV's will fail.
Hope it helps!
Thanks.
Dharmesh Solanki -
Network Location not showing domain name in Server 2012 R2 after demoting 2003 PDC
The single active NIC in my new Server 2012 R2 no longer shows the Network Location of "DOMAIN.LOCAL" like it did before I demoted the only Server 2003 domain controller. The NIC now shows "NETWORK" as the Network Location.
The registry still shows a Profile with the correct PROFILENAME in
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList\Profiles
but that name does not show up in the Network List Manager Policies inside Local Security Policy.
The 2012 R2 Srv has all of the FSMO roles, Client PC's can connect to the domain but will not get new map drives from a script, they must be created manually. My Quickbooks Enterprise clients cannot see the QB Server Manager on this server and I think it
is related to this issue because of firewall restrictions.
The Windows Firewall pointed me in this direction because the "Private Networks" is connected to my NIC named "Network" but the Firewall "Domain Networks" is reported as "Not connected."
Any Help is appreciated,
CrazyDogHi,
Based on my research,
Network Location Awareness (NLA) service expects to be able to enumerate the
domain’s forest name to choose the right network profile for the connection. The service does this by calling
DsGetDcName on the forest root name and issuing an LDAP query on UDP port 389 to a root Domain Controller.
If something hinders the DNS name resolution or the connection attempt to the DC, NLA is not able to set the appropriate network profile on the connection.
Therefore, I suggest you check the DNS settings on DCs and other domain-joined machines, which should point to the existing DC as preferred DNS server, and secondary DC as alternate DNS server, IP address of demoted DC should be
removed. In addition, please do not use loopback IP address.
Here are some articles below I suggest you refer to:
Network Location Awareness (NLA) and how it relates to Windows Firewall Profiles
http://blogs.technet.com/b/networking/archive/2010/09/08/network-location-awareness-nla-and-how-it-relates-to-windows-firewall-profiles.aspx
Network Location Awareness
http://technet.microsoft.com/en-us/library/cc753545(v=WS.10).aspx
Complete Step by Step to Remove an Orphaned Domain controller
http://msmvps.com/blogs/acefekay/archive/2010/10/05/complete-step-by-step-to-remove-an-orphaned-domain-controller.aspx
Best Regards.
Amy -
Print document's name in Event Log ID #307 on Server 2012
Creating a new printer server using Windows Server 2012. Everything is working out fine so far, however I just ran into one problem that didn't happen in our Server 2008R2 print server.
When looking at print jobs that have completed under: event logs --> Microsoft --> Windows --> PrintService --Operational, I have noticed that Event ID 307 is not displaying the printed document's name in Server 2012 (it did for Server 2008R2).
In Server 2012, the document name simply displays as "Print Document" instead of displaying the document's name.
Anyone have any ideas on how to get the document's name to properly display in the event logs?
Thanks for any help.Hi Alan,
I have configured a Server 2012 R2 standard as print server to manage printers and Monitor the print usage of users, however I am not getting the Print logs (Event Log ID 307) in the default event logs directory on the print Server.
I perform some search and come to know that it’s a known problem in Server 2012 and there is Hotfix available. I installed the Hotfix mentioned here
http://support2.microsoft.com/kb/2938013/en-us , but still logs are not getting generated.
I also made the below setting for the logs.
Creating Registry entry
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Policies\Microsoft\Windows NT\Printers] "ShowJobTitleInEventLogs"=dword:00000001
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\Printers] "ShowJobTitleInEventLogs"=dword:00000001
The policy name: Computer Configuration \ Administrative Templates \ Printers
Allow job name in event logs
Keep printed Docs setting is also enabled on all the printers installed on Print Server.
Noting seems to be working here or am i doing something wrong here.
Regards
Mukesh -
Is it possible to set up parental control in MultiPoint Server 2012?
Hello everyone!
Is it possible to set up parental control in MultiPoint Server 2012. I'd like to filter adult web sites.
Kind regards,
PavelI found an issue with Multipoint Dashboard that when student select to signout and then select "Cancel" to signout to go back to the session, the Multipoint Dashboard filtering is no longer applied to the session.
here is the scenario -
- Student login to the Multipoint server using the end point device as an standard user.
- The Multipoint Dashboard has the configuration to "limit the website to all desktop". "cnn.com" only
- The student session, limits the use of the web browser to only to cnn.com - this is working.
- Studen open an app like notepad - click save --> prompted him to where to save the file.
do not save the file. leave the "Save as" windows open.
- Click Start (left bottom corner)
- Click the account’s name on the top right corner, Click Sign Out
- It will prompt you with a warning that there is a file open and needs to be saved
- "Signout anyway" or "Cancel"
- student select to "Cancel"
- He is now back to the session
This will allow the student/account logged in to bypass the web filtering -
Unable to set (ssl) certificate on a SQL Server 2012 clustered instance
Hello everyone!
I'm trying to encrypt the SQL Server communication with SSL but I can't add the certificate in the configuration manager. I've found and tried a lot of different explaination but none of them worked. I'll described what I've done and hope someone will point
out what I'm missing.
Here is my situation:
- SQL Server 2012 Enterprise Edition. Instance name = INSTANCE, FQDN = SQINSTANCE.mydomain.com. The instance is running under a customized service account: mydomain\sql_sa
- Two cluster nodes running Win Server 2008R2: NODE1.mydomain.com and NODE2.mydomain.com. Cluster itself is CLUSTER.mydomain.com
What I've done:
1) Asked the team in charge to generate a certificate issued to "SQINSTANCE.mydomain.com" with aliases to "NODE1.mydomain.com", "NODE2.mydomain.com" and "CLUSTER.mydomain.com". I get a certificate with "p7b"
as extension
2) Connect on "NODE2.mydomain.com" with account "mydomain\sql_sa". Opened MMC and added the certificate under "Personnal" folder. I tried to add it with "Current user" and "Local computer" settings. Saw both
on internet since I use a specific service account
3) Get the thumbprint of the certificate and add it under HKLM\Software\Microsoft\Microsoft SQL Server\MSSQL11.INSTANCE\MSSQLServer\SuperSocketNetLib\Certificate. (I triple checked to remove blanks or special characters)
4) Reboot the node
5) Open the SQL Server Configuration Manager, go to the network properties. Certificate does not appear in the list
I tried to check with certutil and saw the certificate in the output. Some guys talked about some private key but I don't see this particularity in my situation. I tried to check if the certificate is valid and, according to the criterias, it is.
Does anyone can help me with this?Hi,
Are you sure you've got the certificate correct? http://msdn.microsoft.com/en-us/library/ms191192.aspx
To use encryption with a failover cluster, you must install the server certificate with the fully qualified DNS name of the virtual server
on all nodes in the failover cluster. For example, if you have a two-node cluster, with nodes named test1.<your
company>.com and test2.<your
company>.com, and you have a virtual server named virtsql, you need to install a certificate for virtsql.<your
company>.com on both nodes. You can set the value of the ForceEncryptionoption
toYes
In your case, shouldn't it be created for CLUSTER.mydomain.com?
Thanks, Andrew
My blog... -
Scenario:
Windows Server 2012 R2 Essentials
I purchased an SSL Cert from GoDaddy and I managed (after some challenges) to set up Anywhere access to use that new SSL Cert. I to rebooted the server and I am able to login to Anywhere Access vis https (using the SSL certificate) from PC, Mac and iOS.
So far so good.
The problem I am having is that when I click to launch a remote desktop connection to the server RDP connection wants to use the self signed SSL certificate of the server rather than the SSL Certificate I installed into Anywhere Access. As a result, I get
a security warning like this: "The identity of the remote computer cannot be verified. Do you want to connect anyway?"
The name in the certificate appears as ACME-SERVER.ACMEDOMAIN.local instead of the SSL Certificate I installed, which is
remote.acmedomain.com
If I lick to accept, RDP does work fine, it;s just using a self signed certificate. I want it to use the trusted certificate that I purchased and installed.
My guess is that there must be an additional step to tell Anywhere Access that when it generates the RDP session that it should use the cert? OR, is this just how it works?Because....
the server does not have a 'trusted' certificate assigned to it.
Only the RDP Gateway has the trusted certificate for the external name.
If you want to remove that error, you have to do one of the following:
Make sure your domain uses a public top level domaim, and get a public trusted certificate for your server.
So, something like,
server.domain.publicdomain.com
Or,
Install that certificate on your remote computer so it is trusted.
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+ -
RDS (Server 2012) RemoteApp Question
We have an application which 30+ users currently have installed on their workstations. Any time the client needs an update, that requires either touching all those workstations, or scripting something.To simplify maintenance, we're exploring the possibility of running it as a RemoteApp on a Server 2012 R2 instance of Remote Desktop Services.So far it's working perfectly, with one exception... The application has a window in which any website can be displayed. We currently have it set to our internal Confluence instance.The problem I'm having is that users are unable to log into Confluence when using this RemoteApp. There are no errors; you just enter the credentials in the proper fields, and click the log in button - and NOTHING happens. It's not a showstopper; but if we roll this out to our users, I want it to work 100%.I found an...
This topic first appeared in the Spiceworks CommunityHi,
Thank you for posting in Windows Server Forum.
As per my research, sorry to inform that there is no such ways to let the folders always on top.
Hope it helps!
Thanks.
Dharmesh Solanki -
Windows 8.1 Pro cannot log into RemoteApp running on Windows Server 2012 R2
I have setup a vm running Windows Server 2012 R2 Standard and have enabled multiple RemoteApps. Everything is setup correctly and I can use RD Web Access to access the portal and connect to the remoteapps from any computer except my own. I am
running Windows 8.1 Pro and when I log into the RD Web Access portal, click on one of the apps, it looks like it's loading the session, but gets stuck on Preparing Windows. Everything else up to that point looks like it loads correctly, (i.e. -
Applying Group Policy Settings, applying desktop, etc...). When I log into my Windows 7 dev machine, I can access and run everything just fine. So there must be something between the Windows 8 and 2012 that isn't working quite right.
I have tried logging into the portal as myself and test users...same result.
any ideas?
Jon Wooteni think there is something in your GPOs or collection settings causing an issue
this happens with any remote app, built-in stuff like notepad or just third party apps?
try not doing any kind of printer/device redirection from that host
you can also do winlogon logging to get a better idea of what's going on during the logon operation
you can also use the verbose logon messages GPO to get detailed login status info
if all else fails I think you need to isolate it by creating a test collection and test user with the bare minimum options -
How can I Create a Client Configuration File for RemoteApp and Desktop Connection with Server 2012?
I have a working RDS RemoteApp site and looking to test out the feature in Windows 7 Control Panel\All Control Panel Items\RemoteApp and Desktop Connections
I came across this link: Create a Client Configuration File for RemoteApp and Desktop Connection and I believe this is what I need to do first, but these instructions are for
Server 2008, and I'm running 2012.
Any suggestions or tips on how I can begin testing this with Server 2012?Hi,
You can manually enter the path to the 2012 feed and it will connect and download the RemoteApps and Desktop connections.
If you need a sample .wcx file I have posted one here a couple of times. If you want I will look for it and post a link.
-TP
I tried adding my URL's below, these are sample links that work for me right now for when I log into the web page, but neither of these work. And I'm not sure what I would need to do with or how to create a .wcx file.
When I type in my URL of: https://connect.mydomain.org/RDWeb, I get redirected to:
https://connect.mydomain.org/RDWeb/Pages/en-US/login.aspx?ReturnUrl=/RDWeb/Pages/en-US/Default.aspx -
I am investigating the impact of upgrading from SQL Server 2008 R2 to SQL Server 2012. To reduce the impact of the upgrade, I am planning to restore / create our application database onto SQL Server 2012 with compatibility level 100 (SQL Server 2008 and
SQL Server 2008 R2).
Are there any differences in feature support for database running in native mode on SQL Server 2008 R2 vs a database installed on SQL Server 2012 with compatibility level 100 set?Are there any differences in feature support for database running in native mode on SQL Server 2008 R2 vs a database installed on SQL Server 2012 with compatibility level 100 set?
Yes there can be difference and impact there are few features deprecated in SQL Server 2012 you must be aware about that. Please see
Deprecated Database Features in SQL Server 2012
Deprecated SQL Server features in SQL Server 2012
After you migrate database to 2012 please don't move ahead with production unless you have tested your application to new created database
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP
Maybe you are looking for
-
I had just installed a CAD package that required it to be run in compatibility mode (XP). I now get a window with the following message when starting Fierfox v7.0.1 according to the Help pull down menu and then About.
-
Hi all, A query has been deleted from the production system , how do I know who has deleted the query and other details. thanks
-
I confess I am VERY new to anything apple. I have begun to get interested in an iPod Touch. I saw one advertised on eBay that says it is a second generation 32 GB iPod Touch. Is this a newer model or an older one? Just trying to keep my Apple naivety
-
Each time that I open up Adobe Muse, I get a message similar to the one below. What is this referring to?
-
How to install Office 2010 in ZCM11
Hello NG I would like to know how i can install Office 2010 with ZCM11. In Office2010 no MSI files are available for the installation. The procedure must be running with exe and xml config files. Does somebody give me a tip? thanks in advance for you