Remove password in clear text warning.
After I bound my Lion Server to an AD account and set it up for Profile Manager (http://support.apple.com/kb/HT4837) I have a warning message when i login saying that my password will be sent in clear text. I want to get rid of this message. I have SSL enabled and the login page is HTTPS. Any ideas how to fix this?
Balendran,
Sorry for the confusion. The issue was not that passwords were in clear text inside the wli-ra.xml. The problem was that the password was displayed in clear text on one of the configuration windows of WLI.
For example, the DBMS adapter (the sample adapter shipped with WLI) has a property called "Password" in the wli-ra.xml:
<?xml version="1.0" encoding="UTF-8"?>
<connector>
<resourceadapter>
<config-property>
<config-property-name>Password</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value></config-property-value>
</config-property>
</resourceadapter>
</connector>
When you try to configure Event Connection, one of the pages that come up is called "Configure Event Delivery Parameters", and on which it listed all the properties in the above wli-ra.xml for you to fill in values. As you type in the values for the Password property (as for all other properties), the value is displayed as clear text on the screen. That's the issue I am trying to solve. Any suggestions?
Thanks.
Yongtao
Similar Messages
-
UNIX scripting with id and password in clear text
Hi
I have a shell script to connect and do several PLSQL.
how can the script doing it without the ID password in cleartext?
i.e.
#!/bin/sh
conn id/password ....If you create an operating system authenticated user, you connect to the database without a password, i.e.
sqlplus / is sufficient (assuming the script is running as the appropriate operating system user). Tom Kyte talks about this here
http://asktom.oracle.com/pls/apex/f?p=100:11:0::::P11_QUESTION_ID:1477204811604
There are examples of using DBMS_SCHEDULER to invoke operating system scripts on Tim Hall's site
http://www.oracle-base.com/articles/10g/Scheduler10g.php
Justin -
ACS 5.3 Showing Clear Text Password in Authorization reports
Hello,
When a tacacs user is changing the local password on the router (for local user), the acs 5.3 is showing the new password in clear text in authorization reports/logs.
This behaviour is seen on acs 5.x, whereas acs 4.2 is showing encrypted password in the reports.
I have checked debugs on Router and it is sending password in clear text in Tacacs Authorization packet but encrypted password in Tacacs Accounting logs.
Debug tacacs accounting
debug aaa accounting
4w3d: TPLUS: Received accounting response with status PASS
4w3d: TPLUS: Queuing AAA Accounting request 208 for processing
4w3d: TPLUS: processing accounting request id 208
4w3d: TPLUS: Sending AV task_id=459
4w3d: TPLUS: Sending AV timezone=UTC
4w3d: TPLUS: Sending AV service=shell
4w3d: TPLUS: Sending AV priv-lvl=15
4w3d: TPLUS: Sending AV cmd=username sansehga privilege 15 password *****
4w3d: TPLUS: Accounting request created for 208(sanjay)
debug tacas authorization
debug aaa authorization
4w3d: AAA/MEMORY: create_user (0x851611DC) user='sanjay' ruser='R1' ds0=0
port='tty7' rem_addr='10.76.212.159' authen_type=ASCII service=NONE priv=15
initial_task_id='0', vrf= (id=0)
4w3d: tty7 AAA/AUTHOR/CMD(1390711548): Port='tty7' list='' service=CMD
4w3d: AAA/AUTHOR/CMD: tty7(1390711548) user='sanjay'
4w3d: tty7 AAA/AUTHOR/CMD(1390711548): send AV service=shell
4w3d: tty7 AAA/AUTHOR/CMD(1390711548): send AV cmd=username
4w3d: tty7 AAA/AUTHOR/CMD(1390711548): send AV cmd-arg=sansehga
4w3d: tty7 AAA/AUTHOR/CMD(1390711548): send AV cmd-arg=privilege
4w3d: tty7 AAA/AUTHOR/CMD(1390711548): send AV cmd-arg=15
4w3d: tty7 AAA/AUTHOR/CMD(1390711548): send AV cmd-arg=password
4w3d: tty7 AAA/AUTHOR/CMD(1390711548): send AV cmd-arg=sehgal
4w3d: tty7 AAA/AUTHOR/CMD(1390711548): send AV cmd-arg=<cr>
4w3d: tty7 AAA/AUTHOR/CMD(1390711548): found list "default"
4w3d: tty7 AAA/AUTHOR/CMD(1390711548): Method=tacacs+ (tacacs+)
4w3d: AAA/AUTHOR/TAC+: (1390711548): user=sanjay
4w3d: AAA/AUTHOR/TAC+: (1390711548): send AV service=shell
4w3d: AAA/AUTHOR/TAC+: (1390711548): send AV cmd=username
4w3d: AAA/AUTHOR/TAC+: (1390711548): send AV cmd-arg=sansehga
4w3d: AAA/AUTHOR/TAC+: (1390711548): send AV cmd-arg=privilege
4w3d: AAA/AUTHOR/TAC+: (1390711548): send AV cmd-arg=15
4w3d: AAA/AUTHOR/TAC+: (1390711548): send AV cmd-arg=password
4w3d: AAA/AUTHOR/TAC+: (1390711548): send AV cmd-arg=sehgal
4w3d: AAA/AUTHOR/TAC+: (1390711548): send AV cmd-arg=<cr>
4w3d: AAA/AUTHOR (1390711548): Post authorization status = PASS_ADD
Please share if someone has found the fix to this problem.
Regards,
AkhtarThanks Tarik,
But it seems it did not help overall
Akhtar: Cisco needs long time to fix bugs unless it is P1 or P2 bug. Otherwise they'll do it at their leisure.
If you are not on latest patch already then upgrade. If you are already on the latest patch then wait for the next one. If your bug is not mentioned to be fixed on the resolved caveats don't panic. I've seen many bugs fixed but not mentioned in the release notes. What you need to do is to contact TAC so they contact the BU for your behalf to confirm if the bug is resolved or not.
Regards,
Amjad -
Authentication - clear text/encrypted
Hi all,
I have got another thread open about Set-OutlookProvider as I am having issues with 20-odd XP machines off the domain using OutlookAnywhere.
My question is about authentication when using Outlook Anywhere:
If you setup the proxy as follows (see screenshot):
Is the password sent in clear text or not???? I thought it was, but I have been running packet captures with Wireshark and cheking the output and cannot find the password in clear text.
Am I correct in assuming that by ticking the box "connect using SSL Only" and even not using the option to connect with proxies with certificate will send the credentials encrypted rather than in clear text?
Would appreciate comments.
RegardsCheck the connection settings in your dialog above - you are using HTTPS. So unless your WireShark is running as a man-in-the-middle, you are getting encrypted traffic. Notice also that you will only use SSL - the checkbox is selected
and you can't change it. So your clients will always use SSL for their OA connections - and their traffic will always be encrypted (including the credential traffic). -
Forced to use Clear Text Passwords for OD binding
Running a Tiger Server 10.4.11 as OD master with one Replica. When binding clients to server in Directory Access/LDAPv3, If I "disable Clear Text Passwords," the users can not login. Uncheck this option, everything works fine. Non "Clear Text" passwords used to work, stopped about two weeks ago. If I bind to the Replica, I can disable clear text. Not sure where to look to see what broke.
Did your SSL cert expire ?
Any 10.5 clients ? If so, see
http://www.afp548.com/article.php?story=20071203011158936 -
Username and Password is sent as clear text while accessing external Application
While accessing external application from SSO, the username and the password is sent as a clear text even though the form method is given as POST. Actually the potal opens a new window and it disables the address bar. Still the user name and password is visible in the status bar. Is there any wor around for the same
<S12:Envelope xmlns:S11="..." xmlns:wsse="..." xmlns:wsu= "...">
<S12:Header>
<wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<wsse:UsernameToken xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wsse:Username>TestUser</wsse:Username>
<wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">TestPassword</wsse:Password>
</wsse:UsernameToken>
</wsse:Security>
</S12:Header>
</S12:Envelope> -
Options to avoid Clear-Text Password in Business Objects 4.1 deployed Webi and CR 2013 reports
We would like to avoid bundling clear-text passwords into each Webi and CR 2013 report in BOE 4.1 . Could you recommend some alternatives to not embedding clear-text passwords in Webi and CR 2013 reports? Thanks!
Hello Kenneth,
I have few options for you:
Option 1:
For BO XI 3.1, the Schedule Manager is a tool to help you manage the database logon information of Crystal Report documents in a BusinessObject Enterprise system. You can use the tool to update the logon information for a particular Crystal Report document, as well as looking for other Crystal Report documents that use the same database and update them in batch.
As per my knowledge, there is no such tool exists for BI 4.0/4.1. Still I'd suggest you to test it in your TEST environment. I am sure it will work for BI 4.0 as well.
You can download it on below portal.
BusinessObjects Enterprise XI Schedule Managerhttp://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80af7965-8bdf-2b10-fa94-bb21833f3db8
Option 2:
When doing migration, from one environment to the next, you can setup overrides, within the Promotion Management portion of CMC, that will automatically make changes to the various reports for you, without needing to utilize the external tool to do that.
Here's a nice list of KBA's for the BI 4.0 UMT (Upgrade Management Tool) & Promotion Management:
http://wiki.sdn.sap.com/wiki/display/BOBJ/BI4+Upgrade+and+Promotion+Management+KBAs
Hope this helps!!!
Regards,
Maheh -
Mail sending passwords clear text on Wifi?
Can I assume that the mail application passes passwords and user accounts in clear text. Meaning that if you're in a wifi hotspot with someone like BT Openzone that doesn't have WEP etc that your passwords are visible to someone with the right software?
Presently I avoid using my itouch for retrieving e-mails in public places just in case. Can't see anything within the manual that helps.
Thanks
PaulCan I assume that the mail application passes passwords and user accounts in clear text. Meaning that if you're in a wifi hotspot with someone like BT Openzone that doesn't have WEP etc that your passwords are visible to someone with the right software?
Yes, that is safe to assume. -
Clear text value not allowed for credentials in config.xml
I am in the process of migrating our J2EE application from Weblogic 8.1 to Weblogic 10 MP1 and have converted config.xml to the new schema. When starting up in production mode, I see the following error which causes the server to shutdown:
<Server failed. Reason: [Management:141266]Parsing Failure in config.xml: java.lang.IllegalArgumentException: In production mode, it's not allowed to set a clear text value to the property: CredentialEncrypted of SecurityConfigurationMBean>
In 8.1 it seems that it would fill in the credentials based on the username and password in boot.properties so it was possible for our installation program to leave these entries blank. However, when starting in 10.0 it doesn't do this. Below is an excerpt from config.xml.
<security-configuration>
<name>xyz</name>
<realm>
<sec:authentication-provider xsi:type="wls:default-authenticatorType"></sec:authentication-provider>
<sec:authentication-provider xsi:type="wls:default-identity-asserterType">
<sec:active-type>AuthenticatedUser</sec:active-type>
</sec:authentication-provider>
<sec:role-mapper xsi:type="wls:default-role-mapperType"></sec:role-mapper>
<sec:authorizer xsi:type="wls:default-authorizerType"></sec:authorizer>
<sec:adjudicator xsi:type="wls:default-adjudicatorType"></sec:adjudicator>
<sec:credential-mapper xsi:type="wls:default-credential-mapperType"></sec:credential-mapper>
<sec:cert-path-provider xsi:type="wls:web-logic-cert-path-providerType"></sec:cert-path-provider>
<sec:cert-path-builder>WebLogicCertPathProvider</sec:cert-path-builder>
<sec:user-lockout-manager></sec:user-lockout-manager>
<sec:security-dd-model>Advanced</sec:security-dd-model>
<sec:combined-role-mapping-enabled>false</sec:combined-role-mapping-enabled>
<sec:name>myrealm</sec:name>
</realm>
<default-realm>myrealm</default-realm>
<credential-encrypted></credential-encrypted>
<web-app-files-case-insensitive>os</web-app-files-case-insensitive>
<compatibility-connection-filters-enabled>true</compatibility-connection-filters-enabled>
<enforce-strict-url-pattern>false</enforce-strict-url-pattern>
</security-configuration>
Is anyone else trying to do this?
HenryHi henry,
While running a particular instance in the production mode(wls 10.x),prior to upgrading the domain you need to upgrade the security provider(all the mbeans ) you use in the previous versions and later on if you follow the domain upgrade you may find a solution for this issue... -
How can I add the "Profile Removal Password Payload" to a configuration Profile?
How can I add the “Profile Removal Password Payload” to a configuration Profile?
I’m not seeing an option to add this option when I edit the configuration profile within Apple Configurator.
Do I have to edit the configuration profile(xml file) within a text editor?
FYI:
https://developer.apple.com/library/ios/featuredarticles/iPhoneConfigurationProf ileRef/Introduction/Introduction.html
Profile Removal Password Payload
The Removal Password payload is designated by specifying com.apple.profileRemovalPassword value as the PayloadType value.
A password removal policy payload provides a password to allow users to remove a locked configuration profile from the device. If this payload is present and has a password value set, the device asks for the password when the user taps a profile's Remove button. This payload is encrypted with the rest of the profile.
Key
Type
Value
RemovalPassword
String
Optional. Specifies the removal password for the profile.You have found where it is stored in Thunderbird?
Delete it. When Thunderbird needs it again, it will ask you for it. -
Should trace files contain clear text for queries?
Hi:
I've set up a JDBC connection pool in Oracle WLS 10.3.3 and want to verify that the traffic is in fact encrypted. (I am not going for authentication, just encryption). So I have turned tracing on in the server and I run an application in WLS. In the trace file I see the following:
2011-09-27 18:11:50.248292 : na_tns:Secure Network Services is available.
2011-09-27 18:11:50.248307 : nau_adi:entry
2011-09-27 18:11:50.248324 : nau_adi:exit
2011-09-27 18:11:50.248333 : na_tns: authentication is not active
2011-09-27 18:11:50.248346 : na_tns: encryption is active, using AES256
2011-09-27 18:11:50.248356 : na_tns: crypto-checksumming is active, using SHA1
2011-09-27 18:11:50.248365 : na_tns:exitI am taking this to mean that in fact the application is using an encrypted JDBC connection. Later on in this file though, I see the clear text of the query (everything is clear text actually). I believe this is correct because by the time the query makes it into the trace file the DB has decrypted it and executed it. Is this correct?
Thanks.Are you referring to the database session trace file (e.g. generated by SQL_TRACE=TRUE, event 10046, DBMS_SESSION.SESSION_TRACE_ENABLE etc) ?
What is dumped (ie. SQL statements) is always clear text. (There used to be an issue with passwords from ALTER USER commands still present in the shared pool but I believe that has been fixed so the password is not dumped in clear text).
SQLNet traffic between an Application Server and Database Server is encrypted.
Hemant K Chitale -
Does Portal account info go as clear text or encrypted
Hi Gurus,
When I login to portal, Does my account info(User name and password) go to the server as clear text or encrypted. Please post a reply if you have some idea about it.
Thanks
RajIt is encrypted.
http://www.enhansoft.com/ -
Unable to clear text Field in Multi Screen JFrame GUI Application
i am working with a Swing GUI project where I want to accept user input in a
text field
I have used singleton pattern which will create only one instance of object
due to this when i move from one scree to another the input of textfield
doesnt updated I have used setText method to clear the JTextField but it wont
works
Program one -- 1st screen
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.SwingUtilities;
import java.awt.event.*;
import javax.swing.JTextField;
public class Frame1 extends JFrame
public static Frame1 frame1;
public JButton button;
public JTextField input;
public static Frame1 getInstance()
if(frame1==null)
frame1 = new Frame1();
return frame1;
public JButton getJButton(String mytext)
JButton button = new JButton();
button.setText(mytext);
button.setBounds(450,450,150,50);
return button;
public void myGUI()
JPanel panel = new JPanel();
panel.setLayout(null);
button = getJButton("1st Frame");
addActionListener(button);
input = new JTextField(10);
input.setBounds(200,300,100,30);
panel.add(input);
panel.add(button);
add(panel);
setUndecorated(true);
setSize(1024, 768);
setVisible(true);
setDefaultCloseOperation(EXIT_ON_CLOSE);
public void addActionListener(Object obj)
try{
JButton button1 = (JButton)obj;
button.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent ae)
String text = "";
input.insert("", 0);
Frame2.getInstance().myGUI();
Frame2.getInstance().repaint();
dispose();
catch(Exception e1)
System.out.println("Exception==> "+e1.toString());
public static void main(String[] args)
Frame1.getInstance().myGUI();
Frame1.getInstance().repaint();
program 2 - 2nd screen
import javax.swing.JFrame;
import javax.swing.JPanel;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.SwingUtilities;
import java.awt.event.*;
import javax.swing.JTextField;
public class Frame2 extends JFrame
static Frame2 frame2;
public JButton BackButton;
public JTextField input;
public static Frame2 getInstance()
if(frame2==null)
frame2 = new Frame2();
return frame2;
public JButton getJButton(String mytext)
JButton button = new JButton();
button.setText(mytext);
button.setBounds(450,450,150,50);
return button;
public void addActionListener(Object obj)
try{
JButton BackButton1 = (JButton)obj;
BackButton.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent ae)
input.setText("");
Frame1.getInstance().myGUI();
Frame1.getInstance().repaint();
dispose();
catch(Exception e2)
System.out.println("Exception==> "+e2.toString());
public void myGUI()
JPanel panel2 = new JPanel();
panel2.setLayout(null);
BackButton = getJButton("2nd Screen");
addActionListener(BackButton);
input = new JTextField(10);
input.setBounds(200,300,100,30);
panel2.add(input);
panel2.add(BackButton);
add(panel2);
setUndecorated(true);
setSize(1024, 768);
setVisible(true);
setDefaultCloseOperation(EXIT_ON_CLOSE);
In this application the status of TextField input remain same means it shows
the earlier input in the textfield wnen I come to earlier or next screen.
what is the solution to clear the TextField input while moving from 1st
scrren to 2nd screen.multiple screens = multiple posts
well done indeed - just another farking cross-poster
[http://www.coderanch.com/t/492998/Swing-AWT-SWT-JFace/java/unable-clear-text-box-Multi#2218566] -
Add/Remove Programs - export to text file?
Hello,
I am wondering if it is possible to export a list of everything in add/remove programs to a text file for inventory purposes.
I have not found any easy method to do this short of copying reg files or installer 3rd party software. Since the idea is to save time neither of those are viable solutions.
Does anyone have any ideas?
-JustinYou could try this vbs script that lists installed programs and add info to a text file.
Michael Petersen
Option Explicit
Dim sTitle
sTitle = "InstalledPrograms.vbs by Bill James"
Dim StrComputer
strComputer = InputBox("Enter I.P. or name of computer to check for " & _
"installed software (leave blank to check " & _
"local system)." & vbcrlf & vbcrlf & "Remote " & _
"checking only from NT type OS to NT type OS " & _
"with same Admin level UID & PW", sTitle)
If IsEmpty(strComputer) Then WScript.Quit
strComputer = Trim(strComputer)
If strComputer = "" Then strComputer = "."
'Wscript.Echo GetAddRemove(strComputer)
Dim sCompName : sCompName = GetProbedID(StrComputer)
Dim sFileName
sFileName = sCompName & "_" & GetDTFileName() & "_Software.txt"
Dim s : s = GetAddRemove(strComputer)
If WriteFile(s, sFileName) Then
'optional prompt for display
If MsgBox("Finished processing. Results saved to " & sFileName & _
vbcrlf & vbcrlf & "Do you want to view the results now?", _
4 + 32, sTitle) = 6 Then
WScript.CreateObject("WScript.Shell").Run sFileName, 9
End If
End If
Function GetAddRemove(sComp)
'Function credit to Torgeir Bakken
Dim cnt, oReg, sBaseKey, iRC, aSubKeys
Const HKLM = &H80000002 'HKEY_LOCAL_MACHINE
Set oReg = GetObject("winmgmts:{impersonationLevel=impersonate}!\\" & _
sComp & "/root/default:StdRegProv")
sBaseKey = "SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\"
iRC = oReg.EnumKey(HKLM, sBaseKey, aSubKeys)
Dim sKey, sValue, sTmp, sVersion, sDateValue, sYr, sMth, sDay
For Each sKey In aSubKeys
iRC = oReg.GetStringValue(HKLM, sBaseKey & sKey, "DisplayName", sValue)
If iRC <> 0 Then
oReg.GetStringValue HKLM, sBaseKey & sKey, "QuietDisplayName", sValue
End If
If sValue <> "" Then
iRC = oReg.GetStringValue(HKLM, sBaseKey & sKey, _
"DisplayVersion", sVersion)
If sVersion <> "" Then
sValue = sValue & vbTab & "Ver: " & sVersion
Else
sValue = sValue & vbTab
End If
iRC = oReg.GetStringValue(HKLM, sBaseKey & sKey, _
"InstallDate", sDateValue)
If sDateValue <> "" Then
sYr = Left(sDateValue, 4)
sMth = Mid(sDateValue, 5, 2)
sDay = Right(sDateValue, 2)
'some Registry entries have improper date format
On Error Resume Next
sDateValue = DateSerial(sYr, sMth, sDay)
On Error GoTo 0
If sdateValue <> "" Then
sValue = sValue & vbTab & "Installed: " & sDateValue
End If
End If
sTmp = sTmp & sValue & vbcrlf
cnt = cnt + 1
End If
Next
sTmp = BubbleSort(sTmp)
GetAddRemove = "INSTALLED SOFTWARE (" & cnt & ") - " & sCompName & _
" - " & Now() & vbcrlf & vbcrlf & sTmp
End Function
Function BubbleSort(sTmp)
'cheapo bubble sort
Dim aTmp, i, j, temp
aTmp = Split(sTmp, vbcrlf)
For i = UBound(aTmp) - 1 To 0 Step -1
For j = 0 to i - 1
If LCase(aTmp(j)) > LCase(aTmp(j+1)) Then
temp = aTmp(j + 1)
aTmp(j + 1) = aTmp(j)
aTmp(j) = temp
End if
Next
Next
BubbleSort = Join(aTmp, vbcrlf)
End Function
Function GetProbedID(sComp)
Dim objWMIService, colItems, objItem
Set objWMIService = GetObject("winmgmts:\\" & sComp & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select SystemName from " & _
"Win32_NetworkAdapter",,48)
For Each objItem in colItems
GetProbedID = objItem.SystemName
Next
End Function
Function GetDTFileName()
dim sNow, sMth, sDay, sYr, sHr, sMin, sSec
sNow = Now
sMth = Right("0" & Month(sNow), 2)
sDay = Right("0" & Day(sNow), 2)
sYr = Right("00" & Year(sNow), 4)
sHr = Right("0" & Hour(sNow), 2)
sMin = Right("0" & Minute(sNow), 2)
sSec = Right("0" & Second(sNow), 2)
GetDTFileName = sMth & sDay & sYr & "_" & sHr & sMin & sSec
End Function
Function WriteFile(sData, sFileName)
Dim fso, OutFile, bWrite
bWrite = True
Set fso = CreateObject("Scripting.FileSystemObject")
On Error Resume Next
Set OutFile = fso.OpenTextFile(sFileName, 2, True)
'Possibly need a prompt to close the file and one recursion attempt.
If Err = 70 Then
Wscript.Echo "Could not write to file " & sFileName & ", results " & _
"not saved." & vbcrlf & vbcrlf & "This is probably " & _
"because the file is already open."
bWrite = False
ElseIf Err Then
WScript.Echo err & vbcrlf & err.description
bWrite = False
End If
On Error GoTo 0
If bWrite Then
OutFile.WriteLine(sData)
OutFile.Close
End If
Set fso = Nothing
Set OutFile = Nothing
WriteFile = bWrite
End Function
Deploy deploy deploy -
How can i remove password from my I Pod
how can i remove password from my I Pod
If you mean you can't get past the screen lock then:
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Maybe you are looking for
-
I've been trying to update my iPhoto because my old version (9.3.2) no longer works now that I've updated my OS to Mavericks (10.9.2). When I try to update, I get the message that I can't because iPhoto was purchase by some other user or was refunded
-
how to connect to itunes after i phone is disabled?
-
Is it ok to download idvd to my new iMac
is it ok to dowload idvd to my new imac. I thought it came with it but its not in my apps.
-
''duplicate of https://support.mozilla.org/en-US/questions/1048541'' This is irritating.
-
I have the J3680 all in one printer. I would like to know if anyone knows if there is a way to be able to print from it using a wireless laptop. I understand the printer is not wireless, but I was thinking if there would be an adapter I could get to