Remove personalization for users
Hi,
we are running a portal for many thousand users. We have restricted personalization on the portal so that the user cannot personalize anything.
However after an upgrade, personalization was allowed at some placed for a short while before we removed it. However a couple of users managed to personalize their site, and now we wan't remove their personalization and reset their portal to the default one.
Does anyone know how to do this.
Are there table in the DB where personalization is stored.
We are running EP 60 SP2 Patch 3 hotfix 7 on AIX
Thanks,
Mikkel
In EP5, personalization details was stored in PCD - Database.
If only couple of users, then you can delete these users when they are not using the portal and recreate the user ids with default portal personalization. This is just a work around, i am sure there will be better option in EP6.
If you are fine with the work around, give some points.
Thanks
Senthil
Similar Messages
-
Remove phonenumber for user in spesific OU
HI all,
not a PowerShell guru,but found that i can run following command to SET officephone for every user in a spesific OU
get-aduser -Filter * -SearchBase "ou=testou,dc=test,dc=net" | Set-ADUser -OfficePhone 555-555-1212
But i want to REMOVE Officephone for all users in a spesific OU instead.What would be the correct command to add?
Thanks!
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Off2workHi o2w,
it is a slight modification of your current example:
get-aduser -Filter * -SearchBase "ou=testou,dc=test,dc=net" -Property OfficePhone | Set-ADUser -Remove @{ OfficePhone = $_.OfficePhone }
Cheers,
Fred
There's no place like 127.0.0.1 -
Remove encryption for users?
Hi,
Is it possible to remove the possibility for users to encrypt documents, both using certificates and password? I am a aware that a combination of removing DigSig.api and PKKlite.api, and setting FIPSMode will do the job. But is it a better way of achieving this?
-RasmusI removed the beforementioned plug-ins, but unfortunately this interefered with other critical Acrobat plug-ins. I created a pdf with buttons and actions, saved the document and closed Acrobat. When tried to open the document with Acrobat Pro the program would crash. After I reinstalled the plug-ins this behaviour stopped. Do I really have to sacrifice program functionality and reliability to keep my users from encrypting documents?
-Rasmus -
At the design time i have a panel box that contains 3 <af:goLink> components
At the runtime the user should be able to personalize this panel box where he can
1. Add new links
2. remove
3. Reorder
This changes should be specific to that user only.
Is there any inbuilt task flow where we can achieve this functionality ?
Since the user does not have customization permission the page should not be in Edit if he presses ctrl+sht+E
So if i need some personalized button and on clicking that button i need to show a pop up where i can add , delete and order the links.
and finally i need to save this state in MDS layer.
How can this be achieved within quick time? Please advise.
Thanks and Regards,
Vishnu
Edited by: user10885777 on Mar 21, 2013 3:45 AMThanks Bijesh, This information is really very useful.
By following the steps that Andrejus have given in the blog, we could implement the automatic persistence available through ADF Faces. But in order to add/edit/delete the links from a layout and storing this information for each user in MDS (without the edit layout), whether we need any custom class implementation with some APIs to store the values in MDS?
Please find the below information that we got from the oracle sites.
Along with the automatic persistence available through ADF Faces, you can create your own custom user customization capabilities for the following types of changes:
• Changing an attribute value
• Adding or removing a facet
• Adding or removing a child component
• Reordering child components
• Moving a child component to a different parent
If you want to create these types of custom user customizations, you need to add code (for example, in an event handler) that will call the APIs to handle the persistence.
Can you please advise how this can be implemented? Is there any out of box features available in Web Center rather than this?
Thanks again,
Vishnu -
Remove Personalization at User Level - Saved Searches
All,
There is a problem in the Saved Searches. We are on 11.5.10. The page immeditely throws error when a custom view is created using "Save Search" button.
It says,
## Detail 0 ##
java.lang.NullPointerException
at oracle.apps.fnd.framework.webui.OADataBoundValueCustomization.getValue (OADataBoundValueCustomization.java:191)
I am not able to revert this view created through save search. I tried by setting the Disable Self-Service Personal to Yes at that user level where i created the view and bounced apache. But the error still exists.
Is there any means like by "Functional Administrator" responsibility where these views can be removed?
Thanks,
PadmajaPl see if a similar issue reported in MOS Doc 859190.1 (Personal Worklist Returns NullPointerException When 'Disable Self - Service Personal' Is Set To Yes) can help
HTH
Srini -
Bex query crash for user on sap portal
hi gurus
i have a bex query which users see it through sap portal, i have the case where a user X has made some drill down between rows and columns of the query (over portal), and since then every time this user X open the query, portal shows the query on the rows-columns format that the user X used once.
What can i do in order user X see que query (on portal) in the default rows-columns??
This problem just happen with user X, others users see the query in the default format with no problems.
I ve tried deleting the portal personalization for user X on sap portal, but the problem persists...
suggets?
regards..
jokerIf its Java only error then there wont be any dump in ST22.
Strange issue for you, in general if we get 500 error, there should be details of it in the same page.
You said this issue is occuring for only one user, is it getting replicated every time?
You are also seeing the same error when u login as that particular user?
Do one thing, assign him the Content Admin role and then do the preview of this iView form content admin and see if ur still seeing this error.
Regards
Yugandhar Reddy -
How to remove all the users personalization at once?
Hello,
I would like to remove all the personalization the users have made in their portal display (for example, theme).
How do I do it?
RoyFound it under the support section.
Support->Portal Content Directory->Personalization cleanup -
How to make default personalization options for users
Hi all,
How can I make default personalization options for users, so that those will the default options when the user opens the portal BSP applications. Those will be the standard, at later point of time if they want they can personlalize some other fields, but earlier fields will be the default fields and user cant be able to change them.
Thanks
MurthyHi Murthy,
If you use IMG (crmc_blueprint_c) to customize PCUI appl than you can use the personalization feature. If you select 'Not in List' in the IMG for the field in the fieldgroup structure, than this field by default will not be viewable in the List View and will not be checked as 'Visible' in the Personilzation link. So by not selecting 'Not in List' you are giving that field to be viewable and all other fields are available for users to personalize by default.
If you have maintained the 'List View' using the CRM Designer, than most likely you would lose the above feature, as SAP Standard code considers the CRM Designer as high level of customization.
Thanks
Harsh -
How to make defalt value true for user personalization
Hi,
Specific column has default value for User personalization is false,How can i make it true.
Please suggestHi ,
when user personalise a page , it shows a default level,site level,organization level,responsibility level value for a columns property.
Default level is not overriden by user only other three site level,organization level,responsibility level are overriden.
User personalization property of a country code column has a false value at default level
1.How can i change it to true at default level.
2. If default level will remain as false for User personlisation property and if i change a property value to true at other level.Will it make any personalization enable,As i have already tried Second option, I am not getting a value back. -
Mailbox cleanup could not completely remove the mailbox for user
Hello.
I have Exchange 2010SP3 2 DAG member in cluster.
Recently i have warning in app log on a second DAG member:
Mailbox cleanup could not completely remove the mailbox for user GUID.Encountered error 0xfffffae8. Should this message continue to persist for the same mailbox, it may be indicative of a problem that requires further investigation.
I read all post wich say just unmount and mount database.
I can't find any user wich have guid containted in error.
So that i need to do?
Can i use StartDAGmaintenance and reboot a server,then after reboot use StopDAGmaintenance?Hi,
I suggest to refer to this blog to find this mailbox by GUID.
http://blogs.technet.com/b/ehlro/archive/2010/04/22/how-to-find-the-object-that-belongs-to-a-guid.aspx
Then check which database this mailbox belongs to, dismount and mount this database.
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support -
Remove sysdba privilege for user
Hi,
$ sqlplus
SQL*Plus: Release 9.2.0.7.0 - Production on Thu Apr 19 05:57:41 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Enter user-name: / as sysdba
Connected to:
Oracle9i Release 9.2.0.7.0 - 64bit Production
JServer Release 9.2.0.7.0 - Production
SQL> exit
Disconnected from Oracle9i Release 9.2.0.7.0 - 64bit Production
JServer Release 9.2.0.7.0 - Production
$
$
$ id
uid=5000(webman) gid=103(wbroot)
$I want to remove "sysdba" connect privilege for user "webman", what do I need to do?
I am on HPUX
ThanksI tried the revoke command below & I am stiil able to connect as "/ as sysdba" for webman.
revoke sysdba from webman;These are the users on in the DB.
SQL> select username from dba_users;
USERNAME
SYS
SYSTEM
OUTLN
WEBMAN
DBSNMP
SECW
SEC
DAEMON
8 rows selected.
SQL> select username,granted_role,default_role from user_role_privs;
USERNAME GRANTED_ROLE DEF
WEBMAN CONNECT YES
WEBMAN DBA YES
WEBMAN OT_ADM YES
WEBMAN OT_OWNER_ROLE YES
WEBMAN OT_SEC YES
WEBMAN OT_USR YES
WEBMAN RESOURCE YES
7 rows selected. -
Remove T Code for each ROLE for user
Hi Experts
Can anyone tell me how to remove the T code for each role which was define individually for users Eg
CR01 has been assign to 50 users, the difficulty is I have to go to each role then search for CR01 t code then delete and again generate the Authorization
In this way there are so many t codes which I have to go one by one to delete it.
Any help to remove the t-code for each role through any way.
regards
Piroztry the Security forum at Security
they might have trick (such as CATT scripts).
doing this via SQL commands is dangerous. avoid this solution if you are not 100% sure of its impact. -
Need help with Java app for user input 5 numbers, remove dups, etc.
I'm new to Java (only a few weeks under my belt) and struggling with an application. The project is to write an app that inputs 5 numbers between 10 and 100, not allowing duplicates, and displaying each correct number entered, using the smallest possible array to solve the problem. Output example:
Please enter a number: 45
Number stored.
45
Please enter a number: 54
Number stored.
45 54
Please enter a number: 33
Number stored.
45 54 33
etc.
I've been working on this project for days, re-read the book chapter multiple times (unfortunately, the book doesn't have this type of problem as an example to steer you in the relatively general direction) and am proud that I've gotten this far. My problems are 1) I can only get one item number to input rather than a running list of the 5 values, 2) I can't figure out how to check for duplicate numbers. Any help is appreciated.
My code is as follows:
import java.util.Scanner; // program uses class Scanner
public class Array
public static void main( String args[] )
// create Scanner to obtain input from command window
Scanner input = new Scanner( System.in);
// declare variables
int array[] = new int[ 5 ]; // declare array named array
int inputNumbers = 0; // numbers entered
while( inputNumbers < array.length )
// prompt for user to input a number
System.out.print( "Please enter a number: " );
int numberInput = input.nextInt();
// validate the input
if (numberInput >=10 && numberInput <=100)
System.out.println("Number stored.");
else
System.out.println("Invalid number. Please enter a number within range.");
// checks to see if this number already exists
boolean number = false;
// display array values
for ( int counter = 0; counter < array.length; counter++ )
array[ counter ] = numberInput;
// display array values
System.out.printf( "%d\n", array[ inputNumbers ] );
// increment number of entered numbers
inputNumbers++;
} // end close ArrayYikes, there is a much better way to go about this that is probably within what you have already learned, but since you are a student and this is how you started, let's just concentrate on fixing what you got.
First, as already noted by another poster, your formatting is really bad. Formatting is really important because it makes the code much more readable for you and anyone who comes along to help you or use your code. And I second that posters comment that brackets should always be used, especially for beginner programmers. Unfortunately beginner programmers often get stuck thinking that less lines of code equals better program, this is not true; even though better programmers often use far less lines of code.
// validate the input
if (numberInput >=10 && numberInput <=100)
System.out.println("Number stored.");
else
System.out.println("Invalid number. Please enter a number within range."); Note the above as you have it.
// validate the input
if (numberInput >=10 && numberInput <=100)
System.out.println("Number stored.");
else
System.out.println("Invalid number. Please enter a number within range."); Note how much more readable just correct indentation makes.
// validate the input
if (numberInput >=10 && numberInput <=100) {
System.out.println("Number stored.");
else {
System.out.println("Invalid number. Please enter a number within range.");
} Note how it should be coded for a beginner coder.
Now that it is readable, exam your code and think about what you are doing here. Do you really want to print "Number Stored" before you checked to ensure it is not a dupe? That could lead to some really confused and frustrated users, and since the main user of your program will be your teacher, that could be unhealthy for your GPA.
Since I am not here to do your homework for you, I will just give you some advice, you only need one if statement to do this correctly, you must drop the else and fix the if. I tell you this, because as a former educator i know the first thing running through beginners minds in this situation is to just make the if statement empty, but this is a big no no and even if you do trick it into working your teacher will not be fooled nor impressed and again your GPA will suffer.
As for the rest, you do need a for loop inside your while loop, but not where or how you have it. Inside the while loop the for loop should be used for checking for dupes, not for overwriting every entry in the array as you currently have it set up to do. And certainly not for printing every element of the array each time a new element is added as your comments lead me to suspect you were trying to do, that would get real annoying really fast again resulting in abuse of your GPA. Printing the array should be in its own for loop after the while loop, or even better in its own method.
As for how to check for dupes, well, you obviously at least somewhat understand loops and if statements, thus you have all the tools needed, so where is the problem?
JSG -
Variable not appearing for User
Hi everyone!
I have a query which the user have been using for quite some time and it was working fine. When the query is run the user has option of 3 input variables.
Today, all of a sudden, the 3rd variable does not show up for that user. The query runs fine for every other user. I mean all 3 input variables show up.
Some how only for this particular user, the 3rd variable does not appear.
Has any one encountered this situation. Can any one provide me some possible areas to look into as to what might have changed or what could be causing this problem.
All your help is appreciated.
Thankx!
Kumar.Hi Raj,
I did try to remove the personalization on the user's system. But the variable still did not appear. I noticed few more things. The variable is "Site ID" (custom one).
1) The Site variable does not appear even on other queries only for this user.
2) I tried to make the user use another system and run the query, it still does not appear.
3) I created another query for user just to display the Site ID without any variable. It runs fine. When I created a selection variable for Site ID on the same query now the variable again does not appear.
So I think it must be either a change in authorization or change in definition.
Can you think of any other issue it might be encountering?
Thankx!
Edited by: kumar saurabh on Aug 25, 2008 4:50 PM -
I removed SkyDrive for Business and installed OneDrive for Business on my laptop. After that, I had problems opening a Word and Excel document in a SharePoint site (SP2013). After installing Service Pack2 from Office2010, this problem is solved.
But I still have the same problem with InfoPath. Whenever I click an InfoPath form (I have InfoPath 2010 on my laptop),...
... I get the error "cannot display web page".
When I change the URL
ms-infopath:ofe|u|http://intranet.water-link.be/samenwerken/awwit/Autorisaties/Gebruikersbeheer/2015-02-25%20Aanvraag%20gebruikersbeheer%20voor%20Stephanie%20Geeraerts.xml
into
http://intranet.water-link.be/samenwerken/awwit/Autorisaties/Gebruikersbeheer/2015-02-25%20Aanvraag%20gebruikersbeheer%20voor%20Stephanie%20Geeraerts.xml
I can open the InfoPath form and read it.
Any ideas about how to fix this ? I already tried to restore the Office 2010 via Control Panel - Install Programs but without any success...Hi Gert,
As I understand, you can’t open InfoPath form in SharePoint 2013 unless you change the URL without “ms-infopath:ofe|u|”.
There are some reasons which maybe cause this issue, and you can try to do things below:
Access CA -> General Application Settings -> Configure InfoPath Form Service -> Check the two options in User Browser-enabled Form Templates.
Go into the registry by typing regedit from the Run line and rename the SharePoint.OpenDocuments.5 key (ex. SharePoint.OpenDocuments.5.old) under HKEY_CLASSES_ROOT.
In library settings, click "relink documents to this library".
Here are some similar posts for your reference:
http://blogs.technet.com/b/office_integration__sharepoint/archive/2014/02/24/quot-the-webpage-cannot-be-displayed-quot-when-trying-to-open-edit-an-office-file-from-a-sharepoint-2013-site.aspx
http://www.infopathdev.com/forums/t/28998.aspx
Thanks,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]
Maybe you are looking for
-
Dear All, I want to see the masterdata information related to GL account like Gl account, Description, recon account for account type(Control data), Field status group etc....all details related to GL account. I tried table SKA1 but could not get all
-
Hello, I have three devices that I use via Itunes. When I connect each device it finds the device without issue. However, under Manage Devices, only my ipad 2 is reflected. I am not seeing my iphone 4s or my itouch. Is there a reason for that? I
-
I cannot turn my iSight Camera off
The green light is on when I start the mac and turning on photo booth or iMovie does not disable it ... how can I "fix'' this?
-
Keep receiving Msg "you are attempting to open a secure connection, but the server's cert is not trusted". If I try to trust certificate it requires that I enter my key store password. I have no idea what that is. If I View the Certificate it says
-
I can't find "customized mac service" in my country, why?
I was looking for the customized Macbook Pro 15 inch ( turbo to 4.0 ghz), Iris graphics only. But I couldn't find it in Egypt's website.