Removing "iMovie" and Apple logo from Menu screen

I am using one of the new themes with the spinning tube and "iMovie" spinning opposite way. How do I get rid of "iMovie" or change it to something else? Also, is there a way to remove the apple logo from the bottom right?
Thanks,
John

iDVD is designed as an authoring application, but its options are limited and built-in. If you need more versatiIity, and are willing to spend time learning a new method, you may want DVD SP.
For your current question, it doesn't matter what theme you initially select, if you don't want one, set your project to have the DVD play immediately. No menu/theme will be seen.
Go to your iDVD project's Map view and drag your iMovie from its current box into the first one that says to 'drag content here to automatically play when disk is inserted' and you rmovie will start right away as if it has no menu.
When the movie is finished, the themed menu will come up unless you set the movie to loop, or devise a black screen--see these for ideas:
http://homepage.mac.com/profpixel/AutostartDVD/autostart.htm
http://discussions.apple.com/thread.jspa?messageID=10230676&#10230676

Similar Messages

  • Ipad wont switch on and apple logo stays on screen

    Tried holding down buttons but still not working?

    If it has NEVER been jailbroke, here are some standard repair procedures:
    First, I want to ensure that you did the system reset correctly.  Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, read this.

  • IPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots it doesn't recognise the select and play button

    iPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots and then doesn't recognise the select and play button to show the tick. I'm helpless.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                 
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Recently when clicking on Safari, it refused to open saying there were some components damaged. It was suggested I backup, remove OSX and reinstall. Now all I get is white screen and apple logo when starting. What to do?l

    I Have an iMac desktop purchased in 2010 with OS X 6.1.6 and Snow Leapard. Recently after starting up, I was not able to open Safari. I checked for updates and all was well. I tried again and got a message saying Safari could not be opened because some components were damaged. After using Disk utilities to try and repair, it was suggested I uninstall OS X and reinstall from the disk. I did not at the time because I wanted to backup some info to a USB drive. But now when I startup all I get is the white screen and Apple logo and the loading symbol. What happened and How can Imfix it? I am not very tech savvy and don't know where to turn!

    Hi nancy mfromamity harbor,
    Welcome to the Support Communities! It sounds like reinstalling the Snow Leopard operating system is your next step.  This should not affect the documents and data that you currently have on your iMac. I'll include the information to show you how below.
    Mac OS X 10.6: Reinstalling Mac OS X
    http://support.apple.com/kb/PH6606
    Under some circumstances, you may need to reinstall Mac OS X. You can reinstall Mac OS X while keeping your files and user settings intact.
    Note:To reinstall Mac OS X from another computer on your network, see:
    Using another computer’s DVD or CD drive 
    To reinstall Mac OS X:
    Insert the Mac OS X installation disc and double-click the Install Mac OS X icon.
    Follow the onscreen instructions. In the pane where you select a disk, select your current Mac OS X disk (in most cases, it will be the only one available).
    If you want to control which parts of Mac OS X are installed, click Customize, and then select the parts you want to install.
    To start the installation, click Install.
    If you purchased a standalone version of Mac OS X, these installation instructions are in a PDF file located on the Mac OS X installation disc.
    If you need to reinstall the version of Mac OS X that was on your computer when you purchased it, or if you need to restore all the software on your computer (including Apple software, third-party applications, and other printer drivers), refer to the documentation that came with your computer.
    If you need to reinstall Mac OS X and you’ve been using Time Machine to back up your applications, files, and user settings, you can easily restore this information from your Time Machine backup disk after you’ve reinstalled Mac OS X.
    Nancy, here is the contact information if you need technical assistance to get your iMac up and running.
    Intel-based iMac - Contact Support - Apple Support
    http://www.apple.com/support/imac/intel/contact/
    Good luck!
    - Judy

  • Using iPad2 (e.g. using safari) and screen blanks and apple logo appears.  Happened 3x today.  Does this mean my iPad2 is defective?  Thanks from a novice

    My iPad2 recently started to what appears to be a reboot - screen blanks and Apple logo appears.  It has happened 3 times today with the screen just remaining 'blank' for several minutes before the logo appeared.  Any ideas???  Do I have a defective iPad2?  Any help appreciated.

    If it were me, I would back up the ipad, restore it to the factory settings and then restore it from the backup.
    That will give you back your settings and data, but will hopefully eliminate whatever is funky with the OS.

  • Ipad mini cycles from apple logo to start screen and wont stop

    Ipad mini cycles from apple logo to start screen and wont stop. Will not shutdown. Cycles every 5-8 seconds. Thanks!

    I'm having the same problem.  Since it's the same problem, I thought I'd pigtail on this thread, rather than clutter up the forum with a duplicate.  I can start a new thread if this is not appropriate.
    I have tried a reset, using the sleep/wake and home buttons, with no success.  I have also restored to factory settings, then restored to backup.  It's still rebooting itself.
    iPad Mini wifi (not Retina).  iOS 7.1.1.
    This problem started today.  I updated to 7.1.1 soon after the update was released.

  • I am using iphone 3gs since last 4 days. Till yesterday night it was working fine and i have connected this phone for charging . Morning there was apple logo in the screen and every 1mte (approx) it is blinking. I could not restart the phone.Plz help

    I am using iphone 3gs since last 4 days. Till yesterday night it was working fine and i have connected this phone for charging . Morning there was apple logo in the screen and every 1mte (approx) it is blinking. I could not restart the phone.Plz help . I have tried to reset even by pressing sleep and home button but it could not help. Please suggest. Still i have connected for charging .

    Sounds like you have corrupt backup data, if this occurs from one phone to another. Try restoring the phone as a new device, without a backup. Try using for a day before installing any other apps, etc. See if that improves the battery life. Then try syncing back applications a couple at a time. Something seems to be locking in the processor which is draining the battery.
    Do you live in an area where there are Apple Stores? If so, try making an appointment with the Genius Bar to have the device checked out.

  • I have reset my iphone 5c and now has apple logo on the screen. I have tried holding home and lock buttons for 10 seconds, but to no avail. How do i sort this please ?

    I have reset my iphone 5c and now it has the apple logo on the screen.  Nothing is happening, apart from the screen going off for a few seconds, only to go back to black screen and white apple log.  I have tried holding home and lock buttons for 10 seconds, but to no avail.  I did a reset on settings as the IOS 8 was just slowing down my phone horrendously.   How do i sort this please ?

    Hi MartinH78,
    If your iPhone isn't responding or won't start up past the Apple logo, you may find the troubleshooting steps outlined in the following article helpful:
    iOS: Not responding or does not turn on
    Regards,
    - Brenden

  • HT201210 How do I remove itune and charger icon from my iphone screen and allow access

    How can I remove itune and charger icon from my iphone 4s screen and allow access. While downloading the lastest version of iune my iphone was being charged. The phone do not allow access anymore.

    Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
    Miss Bspace wrote:
    How can I remove itune and charger icon from my iphone 4s screen and allow access. 
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    Then see Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • I have some old pagemaker files that I need to open so I have bought a G3 on ebay. It turns on OK but all that comes uo on the screen is an envelope with alternating question mark and apple logo. Any ideas?

    I have some old pagemaker files that I need to open so I have bought a G3 on ebay. It turns on OK but all that comes uo on the screen is an envelope with alternating question mark and apple logo. Any ideas?

    I suggest you get 9.2.  You need to install the same or later version of the OS.  One some computer the shipped version has extra drivers.  The drivers will not be in the official release in this case 9.1.  They would be in 9.2.
    Mac OS 9.1 (Mac OS ROM 7.5.1) and Mac OS X 10.0.4 (4P13)
    *blinking question mark*
    The blinking question mark means that your mac firmware could not find a valid operating system
    on one of your disk volumes.
    Somethings to do to resolve the blinking question mark.
    http://docs.info.apple.com/article.html?artnum=58042
    Try holding down the option key then power on.  This brings up the startup manager.  Click on your hd. Click on right arrow key.
    You need to figure out the level of your firmware before installing 10.2 or greater. ( The PC name for firmware is BIOS. ) Installing 10.2 with a down level firmware will most likely make your iMac unusable and difficult to fix.
    What is firmware?
    The firmware software receives control when you poweron your machine.  It does some hardware testing and some hardware configuration then passes control to your version of Mac OS.   It reside on a PROM ( program read only memory ) chip on the logic board.
    Figuring out what level of firmware you have?
    Open Firmware, boot into Open Firmware.
    Power on your iMac while holding down command+option+o+f
    The first output line contains the firmware level. Mine reads:
    Apple PowerMac4,1 4.1.9f1 BootRom built on 09/14/01 at 13.18.04
    Copyright 1994-2001 Apple Computer Inc.
    On my machine, I have 4.1.9f1.
    What firmware do you need?
    http://docs.info.apple.com/article.html?artnum=86117
    For a slot loading iMac, this article indicates that you need to be running 9.1 or later version of Mac OS Classic.
    http://docs.info.apple.com/article.html?artnum=75130
    "The iMac Firmware Update 4.1.9 will only run on iMac computers with lot-loading CD or DVD drives running Mac OS 9.1 or later from a local drive. If you are using Mac OS X you must boot from a local Mac OS 9.1 or later writeable partition (not a CD, or network disk) prior to following the update instructions."
    You can download the Mac OS 9 updates from the Apple site.
    http://support.apple.com/kb/HT1387?viewlocale=en_US

  • I have downloaded ios 6 on my ipad 2 but it wouldn't install and now my ipad won't work (just has the apple logo on the screen periodically) or reset. Any ideas? Thanks in advance.

    I have downloaded ios 6 on my ipad 2 but it wouldn't install and now my ipad won't work (just has the apple logo on the screen periodically) and it won't reset. Any ideas folks? Thanks in advance.

    Try restoring the device using iTunes. Connect the iPad to your computer and when iTunes opens, select your device on the left side, then click on the summary tab, then click on Restore.
    After the device is restored you will have an opportunity to restore from your backup. Restore from the backup when you are done and then sync with iTunes.
    if that doesn't work, try recovery mode.
    http://support.apple.com/kb/ht4097

  • Stuck on white screen with 5 pink vertical bars and apple logo

    Hi all,  mid 2011 I bought my first IMAC which operated great until a couple of hours ago.
    All of a sudden the screen started to flicker
    I tried pushing the on/off button which did not help.
    Then I pulled the plug out of the socket.
    Put the computer back on.
    I got a white screen with 5 pink bars and apple logo.
    Then a white screen.
    Nothing more.
    Started the computers several times but no luck.
    So, I called the shop where I bought it and just went there. Only thing they can do is send for repairments and reset the whole system.
    And since my computerknowledge goes only so far I do not have a back up...And they can not get my files from the computer.
    Therefore i was advised to go an Apple store, which I did. But I was told they also cannot help me with getting backups.
    So my question is : how do i get an backup from this iMAC if I cannot get past a white screen with 5 pink bars?
    And furthermore, how could this is happen?
    Anyone any advice and ideas regarding this matter?
    Thanks very much!

    Welcome to Apple Support Communities
    This is not a good sign, because the GPU is damaged. Unfortunately, you can't do anything to recover your data, but here's the good part: the GPU isn't soldered to the logic board in your Mac, so only the GPU will be replacing and you won't lose anything more.
    You can take it without a backup before the hard drive won't be modified. However, when you get your computer after being repaired, buy an external drive and start making backups using Time Machine or a clone app like Carbon Copy Cloner. All hard drives fail and you don't know when your hard drive will fail, so it's better to make backup of your files

  • My phone is frozen with black screen and apple logo on it

    My phone is frozen with black screen and apple logo on it.s Not connecting to itunes

    Basics from the user guide are restart, reset, restore from backup, restore as new.  Have these ALL been tried?

  • My iphone5s was accidentally disconnected while updating OS8.2 in my MacBook Pro and now it's stuck with an apple logo on its screen and won't turn on or off. What should I do?

    My iphone5 was accidentally disconnected while updating OS8.2 in my MacBook Pro and now it's stuck with an apple logo on its screen and won't turn on or off. What should I do?

    Connect to iTunes and restore. If you have difficulty, you may have to put the device into Recovery Mode. See the instructions in this support document. If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

  • How do I remove an incorrect apple ID from an iPad and replace it with the correct one?

    How can I remove an incorrect Apple ID from my ipad and replace it with the correct one?

    Hello Shy guy,
    You can try this:
    1. Go to the iTunes Store or App Store
    2. Scroll down, there you will see Apple ID: "your email" (below Redeem and Send Gift)
    3. Tap on that button
    4. Tap on Sign Out
    Now you should be able to use another Apple ID.
    Cedric

Maybe you are looking for