Rendering 2k1556 to dpx - Once it starts it ain't gonna stop!

I'm rendering Full Frame 2k1556 material in the color timeline. It renders fine... but should I wish to STOP the rendering by using the escape key, it CRASHES!!! So once you start rendering you can't stop without crashing it out!! Nuts!!! Its happening only on 2k material.. it has happened on 2 machines (as I wanted to test another system to see if it was the config of the main system causing the trouble...)
I'm exporting dpx files and not QT movies... it seems to be fine if I export QT movies.
Anyone come accross this... Apple please fix this!!
Thanks

You can try running "Apple Hardware Test" to see if it confirms it (note: AHT is not fail safe)
If CD's came with your computer it is on a CD labeled "Hardware Test" To test with CD, insert the CD and restart holding the "c" key until you see the spinning gear.
If DVD insert DVD then:
1. Turn on or restart the computer.
2. Immediately press and hold the Option key. After a few seconds, the Startup Manger screen appearsThe Startup Manager scans for available volumes.
3. Optional: Clicking the circular arrow rescans for other volumes, including NetBoot Server volumes. You can eject any disc in the drive or open an empty tray-loading drive by holding down the Command (Apple) and Period (.) keys. The Command-Period key combination will also close the drive. After inserting a CD capable of starting up your computer, you could rescan for volumes.
4. Click the startup volume you want to use. "Hardware Test"
If hardware test does not mount or does not run bring the computer to Authorized Apple Repair.
-mj
[email protected]

Similar Messages

I have a Macbook and I left it unplugged. It started up slowly when I plugged it in again, but it seemed fine. Once it started charging I shut it down so it would be easier, but now it will not go past the grey screen with the apple. What do I do?

I have a Macbook and I left it unplugged. It started up slowly when I plugged it in again, but it seemed fine. Once it started charging I shut it down so it would be easier, but now it will not go past the grey screen with the apple. What do I do?
I have Snow leopard on my computer, and I tried to do a hard restart as an article suggested, but it did not work. I also tried cleaning out the PRAM.
The only things I did last night:
-cleaned the history of Firefox out, including cookies
-let it unplugged all night
-plugged it back in the morning, it took a long time to figure itself out, but eventually the time was correct and I got on the internet for a bit
-shutdown the computer since I was going out and thought it would help the computer charge
-came back, tried to turn it on, and found that it would not go past the grey screen the apple on it and the spinning wheel even though I left it for 20 minutes or more
-tried turning it off and on to no avail

Before doing a reinstall, which may not be needed at this point,
Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
You could have some directory corruption. Let us know what errors Disk Repair reports and if DU was able to repair them. This could just be a start in repairs and you may need a better utility to finish the job.
Then Repair Permissions.
No need to report any Permissions errors........we all get them.
 DALE

Photos won't import images from my Canon camera. When connected, program sees the images, tells me it will import the new ones, then freezes once import starts, not allowing any other operation to happen. MacbookPro 15" 2012, OSX Yosemite 10.10.3.

Photos won't import images from my Canon camera. When connected, program sees the images, tells me it will import the new ones, then freezes once import starts, not allowing any other operation to happen. MacbookPro 15" 2012, OSX Yosemite 10.10.3. Any suggestions?

Solution discovered. Faulty connector cable. Tried a different one and it worked.

I'm installing windows 8 64 from iso dvd-I did the partition wiht BCamp 5 and I did the usb with compatibility software-once installation start from dvd, it ask me for some disk, usb or dvd drivers to continue. How I can continue the instalation?

I'm installing windows 8 64 from iso dvd-I did the partition wiht BCamp 5.
I did the usb drive with the compatibility software-once installation start from the dvd, it ask me for some disk, usb or dvd drivers to continue.
How I can continue the instalation? How I can provide those driver to the instalation process?
Thanks
Manuel

You can't get there with GUID/GPT.
There are tips on making a USB flash device that is bootable.
You can set aside a small 6GB partition somewhere and put Windows 7 installer there and run it WHILE IN Windows.
Windows Vista can be upgraded in place to 7 RC.
You'll need NTFS (30-50GB).
Windows doesn't support FW for booting.
You can create a drive that has Master Boot Record.

How can I cancel "The Garage Band content is now downloading" once it starts? I thought it would show the size of the download, but it just assumes I have unlimited bandwidth, instead of mobile data rates which are super expensive.

How can I cancel "The Garage Band content is now downloading" once it starts? I thought it would show the size of the download, but it just assumes I have unlimited bandwidth, instead of mobile data rates which are super expensive.
Once it started, it just shows it's progress and there's no option I can find to stop the download.
Any help greatly appreciated.
Regards,
Kye.

Hi,
I am not sure whether it works, Try "Restore Sound Library" in Menu.

Error 4000 appears once initializing starts when burning from Itunes. Help!

I have problems burning CDs from my Itunes library. Once initalizing starts, Error 4000 appears. My diagnostics are as follows, can anyone help?
Microsoft Windows 2000 Professional Service Pack 4 (Build 2195)
iTunes 7.0.2.16
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.1
UpperFilters: GEARAspiWDM (2.0.6.1),
Video Driver: RADEON 9000 SERIES - Secondary \RADEON 9000 SERIES -
Secondary
SCSI\DiskMaxtor6E040L0_________NAR6, Bus Type SCSI, Bus Address [0,0]
SCSI\CdRomAOPEN__CRW5232/AAO_PRO1.02, Bus Type SCSI, Bus Address [0,0]
SCSI\CdRomPLEXTORDVD-ROM_PX-130A1.01, Bus Type SCSI, Bus Address [0,0]
Current user is an administrator.
F: AOPEN CRW5232/AAO PRO, Rev 1.02
Media in drive is blank.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 12 16 24 32 40 48 52.
The drive CDRW speeds are: 4.
G: PLEXTOR DVD-ROM PX-130A, Rev 1.01
Drive is empty.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened
on drive F: AOPEN CRW5232/AAO PRO on CDR media at speed 4X.

an upgrade to iTunes 7.2.0.35 might be worth a try. the itunes versions 7.1.x and 7.2.x have a newer version of the CD Driver DLL (2.0.6.2) than the 7.0.2.16 that you've got.
since it's a custom-built PC, we check the sites of the manufacturers of the individual components to see if there are any updates to those components. there does seem to be a newer version of the firmware (R1.04) available for your AOPEN CRW5232/AAO PRO at AOPEN. i've been assuming (based on your alias) that you're located in Australia, so i was searching in the Asia/Pacific parts of their website for firmware upgrades. if you're not in Australia, it might be worth checking through the correct region, just in case AOPEN has regional differences in their firmware offerings.
in the three fields on this page, select "CDRW drives", "CRW5232/AAO PRO", and "Firmware" to see the firmware offerings for the drive:
AOPEN Asia
with other componentry, check in at ABIT to see if there are any chipset driver or BIOS upgrades available for the motherboard:
http://www2.abit.com.tw/
... and it would be good to see if there are any updates available for your video card at ATI. for additional information on checking on that, see:
Updating the drivers on your Windows PC

I have a gift card and i redeemed it and once i started buying apps it deducted money from my bank account as well as my gift card what do i do?

I have a gift card and i redeemed it and once i started buying apps it deducted money from my bank account as well as my gift card what do i do?

You can't log into any site and see your account's balance. You can log into your account on your iPad via Settings > iTunes & App Store - on my iOS devices my balance shows at the bottom of, for example, the Featured tab in the App Store app under my account id (or you can view your account via Settings > iTunes & App Stores and it should show on the screen that you are taken to). You may not see anything if your account's balance is zero.
Not sure what you mean by relationship iTunes has to products. You can buy music, films, TV shows, audiobooks via the iTunes app on your iPad, and apps via the App Store app - what you buy will be tied to your iTunes account.

Have to click on firefox icon more than once to start the programme

Sometimes I have to click on Firefox icon more than once to start the programme. Multi-clicking on the icon does not always start multiple windows ie the programme just isn't starting sometimes on 1st click.
Firefox always opens when using a hyperlink in an email, document etc.
Have tried creating a new quick launch & also re-installing.
Happens on two PCs - 1x Vista & 1x XP
All help is appreciated :)

First let me disclose that I am not an expert nor even much less. However I used to have this slow as a turtle opening of FF until I got rid of my antivirus software which at the time was Avast. I switched to Microsoft Security Essentials and have had no problems since. FF loads in 3 to 4 seconds!

Is there a way to delete everything on the cloud all at once and start over?

We tried to store a lot of photos to the cloud in one copy. The files have been syncing for over 24 hours. We tried to stop the sync and just throw everything away, and they still show up in the archive. Is there a way to delete everything on the cloud all at once and start over?

Dulls for information on how to permanently delete your files please see Creative Cloud Help | Manage and Sync files.

RHEL4U4 server hang up once I start guest VM

Hi,
My RHEL4U4 server hang up once I start VM with command xm create vm.cfg
Environment:
OS: RHEL4U4
Xen Kernel: xen-3.1.0-13(xen-release-0-99.7), which was installed manually by myself
xen_caps : xen-3.0-x86_32p hvm-3.0-x86_32 hvm-3.0-x86_32p
cfg file like:
builder = 'hvm'
device_model = '/usr/lib/xen/bin/qemu-dm'
disk = ['file:/OVS/running_pool/VM_NAME/System.img,hda,w',
+'file:/OVS/running_pool/VM_NAME/disk01.img,hdd,w',+
+',hdc:cdrom,r',+
+]+
kernel = '/usr/lib/xen/boot/hvmloader'
memory = '2048'
name = 'VM_NAME'
on_crash = 'restart'
on_reboot = 'restart'
pae = 1
serial = 'pty'
vcpus = 1
vif = ['bridge=xenbr0,mac=XX:XX:XX:XX,type=ioemu']
vnc = 1
vncconsole = 1
vnclisten = '0.0.0.0'
vncpasswd = '********'
vncunused = 1
As this VM image was copied from another OVS2.1 machine(xen_caps: xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 hvm-3.0-x86_32p hvm-3.0-x86_64, not sure whether this is the root cause)
Is there any way to resolve the problem?

802680 wrote:
OS: RHEL4U4
Xen Kernel: xen-3.1.0-13(xen-release-0-99.7), which was installed manually by myselfWe don't support Xen on RHEL4 at all. And this version is really old. You should run Oracle VM 2.2.2 (Xen 3.4) or Oracle VM 3.0 (Xen 4.0) instead.

My I ph 5 once I start downloading anything it stops by itself in the middle or after some time ..

My I ph 5 once I start downloading anything it stops by itself in the middle or after some time ..

Hi Ravi4477,
I apologize, I'm a bit unclear on the exact nature or context of your question. If you are talking about downloads from the iTunes Store, you may find the troubleshooting steps outlined in the following articles helpful:
iTunes: How to resume interrupted iTunes Store downloads - Apple Support
iTunes Store: How to delete a downloading purchase on iOS - Apple Support
Regards,
- Brenden

HT2538 what do I do once it starts a single tone and rest again single tone and rests and repeats ?

what do I do once it starts a single tone and rest again single tone and rests and repeats ?

If you are still under warranty and/or have AppleCare, call them.

HT1338 why once I start downloading the mountain lion, it is always waiting..

why once I start downloading the mountain lion, it is always waiting..
I tried to restart the mac several times. It doesnt work all the same.

I found something that fixed the issue for me.
First close the App Store -> then use spotlight to find something called Keychain Access -> go to prefreences in keychain access -> under the Certificates tab navigate to "Certificates Revocation List (CRL): -> change this to off.
Close Keychain Access
Reopen the App Store
Go back to keychain access -> Preferences -> Certifictes tab -> change "Certificate Revocation List (CRL): to "Best Attempt".
Close Keychain Access
Close App Store
Reopen App Store
then naviagte to updates and it downloaded just fine for me.
Hope this helps, let me know if you have any questions.

Downloaded version of Captivate 8 x64 once install starts prompts for disk AdobeCptv80_x64 to continue

downloaded version of Captivate 8 x64 once install starts prompts for disk AdobeCptv80_x64 to continue, Why when all files are listed either on the DVD or local folder to system?

Hello,
Welcome to Adobe Forums.
Are you install Adobe Captivate 8 on a Windows or MAC ?
What is the size of that downloaded file ?
Thanks,
Vikram Gaur
Adobe Support

Trigger - Execute once database started.-

Hi, It's possible to start trigger once database started even before any DML activity take place.
Basically I need to check & update existing record for with certain condition then update the data.
I should not do this manually using a procedure,... but instead a trigger have to do it automatically.
Is this possible,... does Oracle update any table when it starts up.? Maybe I can use that.
Please help..
Thanks in advance.
E.G
CREATE OR REPLACE TRIGGER check_warehouse
AFTER UPDATE
FOR EACH ROW
DECLARE
BEGIN
IF :new.employee > '4000' THEN
.. ...update... ok='false'
else
... set ok='True'
END IF;
END;

I don't think you need this at the database level. You may want to do this check in BEFORE UPDATE or BEFORE INSERT Table level trigger

Rendering 2k1556 to dpx - Once it starts it ain't gonna stop!

Similar Messages

Maybe you are looking for