Rendering takes forever. Is this normal?

Hello guys,
I am wondering whether this is normal or not. I have a QuickTime .mov file. It is only 10 minutes
HDV 60i. I need to convert it to H.264 progressive (to make it watchable on a computer monitor)
So I have imported it into Compressor and choose H.264 settings. All I have changed there was Frame Controls Output Fields to Progressive and reduced the size to 768x432. That's all.
Rendering is now at it's 11th hour, still saying that render time is unknown and showing 0% rendered (no blue percentage fill).
So I am wondering is this normal? It is only 10 minutes, simple video clip.

Activating frame controls with H.264 is not always a good idea, especially not when dealing with interlaced HDV. I would recommend going through ProRes with frame controls, before compressing to H.264.
Have a look here for more info: http://discussions.apple.com/message.jspa?messageID=7309534#7309534
I see you have chosen a frame size where both width and height is divisible by 16. Good choice!

Similar Messages

FCP rendering AVI video is taking forever, is this normal?

Hi all,
I am rendering some HD video files. Each are about 1 to 2 GB each. Last night it took this computer almost 9 hours to render just one of these 2 GB files. Is this normal or do I need to be on the fast track to a genius appointment?
regards,
Mike

You don't mention what format "some HD files" are being brought in as...
If you are capturing HDV (for example) your output could be 5-7X that required if you were working with ProRes.
Moral: If the work was faster on a 2.0GHz MacBook, you're on the lower fringe of the minimum processor requirements. Use the tools Apple provides (like ProRes) to maximumize your efficiency, but make a more powerful system a priority if you're going to be doing much of this kind of work.

After Effects CS6 rendering takes forever

I am currently working on After Effects CS6 and I'm wondering why it takes a long time for me to render a composition. I am not sure if the problem is with the mac that i am using or with the settings i have on AE. When I render the composition of 21 seconds video with 1080p 29.97fps it takes 5 hours and eralier i triend rendering again and it takes 7 hours. is this normal? Please help me.
I am using Mac with this spe
Processor 2 x 2.4 GHz 6-Core Intel Xeon
Memory 12 GB 1333 MHz DDR3 ECC
Graphics ATI Radeon HD 5770 1024 MB
Here's the screenshot of my render queue
HOPE YOU CAN HELP ME AS SOON AS POSSIBLE! THANKS!

Your screenshot has been scaled so much that we can not really see any details about the comp, only some general information about the render cue, but that looks like a lot of 3D layers, some lighting, and some movement. As Mynenium said, this may be completely normal. Many of my more complex projects take four or five minutes per frame to render. It all depends on the assets.
A suggestion for speeding things up is to make all of your artwork no bigger than it will appear in the final comp. If the images in this comp are the same size as the comp and they are never bigger than 1/8 of the comp window then you're wasting a lot of time scaling them down.
This project could also be done with Particular or other particle system. Same goes there, make sure that the artwork is not bigger than it needs to be.

Archive and install is taking forever-is this normal?

Due to ongoing problems with spinning beach balls on my Intel iMac (see my post here: http://discussions.apple.com/thread.jspa?threadID=1413753&tstart=0), I decided to just archive and install late last night to see if that would help. Ten hours later, the install is still going ... and it's telling me there are more than 11 hours to go! (As I type this, on my old iMac G3, it's 61% done writing files.) This is a bare-bones reinstall, mind you—just the system and some HP printer drivers.
As I stated in the other post, my RAM is maxed out, and neither Disk Utility nor DiskWarrior have been finding any disk/directory/permissions problems (S.M.A.R.T. status consistently shows up as Verified). Apple Hardware Test hasn't turned up anything either, though I haven't let it run in extended mode; PRAM/SMU resets don't seem to have made a difference.
Obviously, something isn't right ... any ideas? Could the hard drive be on the verge of buying the farm despite indications otherwise? Could the RAM be bad? (It's from OWC, by the way.) Or could the motherboard or power supply be about to crap out?

I don't know what you are doing, but to erase the drive:
Extended Hard Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Erase button.

It takes several minutes to open a pdf file....is this normal?

When I scan something and save as a pdf file, or when I hit something and say save as (PDF), when trying to retrieve it, my computer takes forever. This is not the case on other types of files (i.e. xls, doc, etc.) Is there a fix for this? I uninstalled Adobe and reinstalled and it seems to help for about a week....now we are back to WAITING WAITING WAITING!

There are various options you could try: open Adobe Reader | Edit | Preferences
Security (Enhanced): disable Protected Mode
General:
uncheck 'Show me messages when I launch Reader'
check 'Dont show message while viewing documents'

Thunderbird freezes and takes forever to open "write window" when I try to send emails

I'm using Thunderbird 31.4.0 and when I wanna send an email Thunderbird freezes and it takes forever (in this case 20+ seconds) for the "write" window to open and ALLWAYS with the recipient left out.... and oh please don't get me started on how long forever is when I try to reply an email........
Thanks

I'm using AVG Internet Security 2015 and I should perhaps also mention that I have a chosen few Thunderbird add-ons (adblock, email security and a few others) installed and that it works "so-so" when I run Thunderbird in "safe mode".
B.R.

Is there any easier way to edit imovie files that have been exported as mov file then added to FCE 4?? As every move I make has to be rendered and takes forever??? Also my recording is going out of focus without me touching the camera, why has this happen

Is there any easier way to edit imovie files that have been exported as mov file then added to FCE 4?? As every move I make has to be rendered and takes forever??? Also my recording is going out of focus without me touching the camera, why has this happened any idea what causes this??
iMovie '08, Mac OS X (10.5.8), FCE 4

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Adobe After Effects CS6 takes FOREVER to lock existing frames before rendering

My After Effects CS6 locks up for 3 minutes "Locking Existing Frames" before it even begins to start rendering, every time I need to preview anything - even at the lowest possible quality.
The render goes perfectly normal - it is not the rendering that is the problem - it is the "Locking Existing Frames" process BEFORE rendering that freezes up my computer for 3 minutes, and ruining my life.
I am using Adobe After Effects CS6 on a Mac Book Pro with a 2.9 GHz Core i7 processor (2 cores) and 8 GB of RAM.
Please help me understand what is happening when it is "Locking Existing Frames," and what some solutions could be to reduce the amount of time it takes to do this.
ALSO: I have scoured the Web for hours looking for the answer to this problem, and to this point it has never been solved. If you can solve this issue, Adobe should give you a promotion and $1 million.

Hi Rick and Greg,
Thanks for the quick responses. Below are all the details to all your questions. Also - just to emphasize again - my rendering goes super awesomely fast. It is not the rendering. It is the "Locking Existing Frames" process before the rendering that is ruining my life.
FREE MEMORY:
This is brand new Mac Book Pro with hardly anything stored on it.
The 8 GB of RAM is split into 2 memory slots, each with 4GB of RAM
3RD-PARTY CODECS:
I am not aware of any third-party codecs in this system. I imported some fonts (ITC Franklin Gothic) and some video files (see below), but I am not aware of any third-party codec installed on this system.
DISC CACHE:
My Disc Cache is enabled
My maximum disc cache size is 69 GB
I do not have a seperate "fast hard drive" or "SSD" seperate from my main hard drive, where I store my footage.
MPEG SOURCE FILES:
If by source files, you're asking about the video files I imported:
2 MP4s (5 sec. each)
3 QuickTime .mov (3 sec. each)
1 Audio-only FLV. (2 minute background music throughout video; used to be a Premiere working file)
MULTIPROCESSING
Turned off, but still locks up forever before rendering.
ADDITIONAL FUN FACTS:
Here are some additional observations that might help:
It doesn't just take a long time to start rendering; it freezes my entire computer for the duration of the "Locking Existing Frames" process - putting my entire life on hold for 3 minutes, every time I need to preview a minor detail... It's a nightmare.
The video is 1 min. 45 sec. long so far, and has 15 sec. to go.
The video is comprised of 99 percent motion graphics, and 1 percent actual footage (Occupy Wall Street hates my footage)
The complexity in this video is that there are a lot of compositions inside of compositions inside of compositions, but even when I go to the very beginning of the first comp - where the only animation is a line being drawn with the "Stroke" effect - it still takes 3 minutes to "Lock Existing Frames."
Again... The rendering goes super fast after the "Locking Existing Frames" process. The problem is NOT with the rendering. The problem is the "Locking Existing Frames" process BEFORE the rendering starts.
This is my job and I can't do efficiently until I solve this problem, so I will be very responsive until we can identify the issue.
Thanks again for all your helpful responses!

No matter what wi-fi I'm connected to or browser I'm using, webpages take forever to load or they never load at all. Other computers do not have any problems. How can i fix this?

No matter what wi-fi I'm connected to or browser I'm using, webpages take forever to load or they never load at all. Other computers do not have any problems. How can i fix this?
I've tried safari, chrome, firefox...I've cleared the cache as well. This has been going on for several months and used to be tolerable as it was not every website. Now it has become every website and is impossible to deal with. My roommates computer and my cell phone connect fine. I'm fully connected to the router yet websites don't load. I'm using 10.7.5. Thank you!!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

My iPad 4 takes forever to charge and sometimes shuts down for no reason and instantly turns back on..... any suggestions as to how to fix this?

I bought the iPad 4 as soon as they announced Air was coming out. I have noticed it takes FOREVER to charge. Is that normal?
I have also noticed that it suddenly turns off for no reason then will instantly turn back on....... I

You may want to try this:
1. Backup iPad
2. Setup iPad as new. Settings>General>Reset>Erase all content and settings
3. Test iPad thoroughly
4. If everything is fine, restore backup to iPad

Preview takes forever to open, much slower than on my old MacBook. It has been like this since I bought the computer last January. Why is Lion so much slower?

Preview takes forever to open, much slower than on my old MacBook running Snow Leopard. It has been like this since I bought the computer last January. Any ideas?

Take it to an Apple Store for testing. If you don't get immediate satisfaction, exchange it for another one, which you can do at no cost, no questions asked, within 14 days of delivery.

I am running my first backup on Time Machine using a Seagate external hard drive with a thunderbolt adapter and cable. I have a MacBook Pro 2011. It is backing up 11GB, and is telling me it will take approx two days. Is this normal?

I am running my first backup on Time Machine using a Seagate external hard drive with a thunderbolt adapter and cable. I have a MacBook Pro 2011. It is backing up 11GB, and is telling me it will take approx two days. Is this normal?

Download the supplemental fix to 10.7.5
http://support.apple.com/kb/DL1599

Battery percentage indicator takes a little while to update when resuming from sleep - is this normal?

Hi folks,
I recently bought a new MacBook Pro with Retina (13") and have noticed a pecularity with the battery indicator that I'd appreciate an opinion on please.
I've charged my MBPr battery to full (100% on the menu bar and green light on the MagSafe connector). I disconnect the power and close the lid which puts that MacBook to sleep. After leaving it overnight, I open the lid and and the unlock screen shows the percentage battery having gone down by a couple of percent (which I take to be normal) - e.g. 98%. However, when I unlock and get back to the desktop, it's still showing as 100%. Clicking on the battery icon, it shows as calculating the amount of time left. After about a minute or so, it tells me how much estimated time I've got left, and the percentage indicator updates to give me the correct percentage. When using it normally, the percentage indicator drops on the desktop as I would expect it to.
Is this normal for it to give the correct percentage on the unlock screen, but then to give the original (pre-sleep) percentage when unlocked, until it has updated and worked out how much time it's got left on battery?
I've read elsewhere that many folks have been having issues with the battery indicator since Mavericks rolled out, and there are some resets that can be done by pressing various key combinations whilst powering on. I've had the MacBook only a few days, and haven't installed anything on it - it hasn't even been connected to the internet yet - so I assumed that it should be working correctly from the off - unless there's something buggy with Mavericks causing this?
I would normally shut down a computer overnight, but I like how the MBP instantly resumes when I open the lid. Am also wondering whether it'll take a few charge cycles before the battery reaches full capacity and is properly calibrated. The system report shows that it shipped to me having undergone only 3 charge cycles to date.
Any opinions would be much appreciated.
Cheers,
Gopha

After some more testing:
Disabling the battery percentage indicator and then re-enabling it causes the percentage value to update to the 'correct' value. Rebooting the MacBook also causes it to update to the correct value.
Seems like I'm not the only one with this particular issue: https://discussions.apple.com/message/24402123#24402123
https://discussions.apple.com/message/24406197#24406197
as a newbie to Macs and Mavericks, am I right in saying that there is currently an issue with Mavericks?
Thanks,
Gopha

I'm new to Mac, have had for approx. I put my iPhone and iPad and my wifes in iTunes and now when i start my system on. I now have a Guest user show up at the log on screen. Is this normal. And how can I take it off.   Tried the help and no luck

I'm new to Mac, have had for approx. I put my iPhone and iPad and my wifes in iTunes and now when i start my system on. I now have a Guest user show up at the log on screen. Is this normal. And how can I take it off.   Tried the help and no luck

Tatanka11 wrote:
I'm new to Mac,...
Then... You may find these Links of Interest and Value...
Show me how to set up my Mac.
http://www.apple.com/support/mac101/
http://www.apple.com/support/switch101/     Switching from PC
http://www.apple.com/findouthow/mac/
Enjoy your Mac...

Just bought a new iMac and it is telling me it will take 27 hours to transfer documents from the old one!! Is this normal? Can I speed this up some how??

I just bought a new iMac and it says it will take 27 hours to transfer documents from the old mac! Is this normal? Can I speed this up??

If you are transferring with Wi-Fi or Ethernet and you have to transfer a lot of files, it's normal. Wi-Fi and Ethernet are the slowest methods to transfer files.
Instead, you can check if your old Mac has got a FireWire 800 port. If so, you can get a Thunderbolt to FireWire adapter and a FireWire cable, so the transfer will be done by FireWire, making the migration faster.
If you don't want to spend money, continue the migration. Another thing you can do is to get an external drive, make a Time Machine backup of your old Mac and use the backup to transfer your files to the new Mac. Read > http://support.apple.com/kb/HT4889?viewlocale=en_US&locale=en_US

Rendering takes forever. Is this normal?

Similar Messages

Maybe you are looking for