REP-0503: You did not specify a name of the report

would you tell me where I could find the detail help for report error message. thks!

Hi,
Though you can search for it in the online help its too slow and cumbersome to do so. Instead check
1)whether this reports exist in the reports_path of your server..the path that its searching for reports you can get it using the showenv command of the rwservlet like
http://youriasservername:port/reports/rwservlet/showenv?server=<your reports server>
2) if you are calling this report from forms make sure that the dummy report object that you have inthe design time does have a report name.
HTH
Elango.

Similar Messages

REP-0503: You did not specify the name of a report

I am getting the above error while calling a report from a form in Oracle 9iDS.
I have created anode in the report node of the form(TESTREP1) this is same as my report rdf name which is stored in C:\temp\9ids folder, report_path points to this folder,OC4J is start, in the properties of TEST_REP1 in the form i have set:
filename C:\temp\9ids_test\test_Rep1.rdf
My code on a when-button-pressed trigger is
DECLARE
     repid report_object;
     v_Rep varchar2(100);
BEGIN
repid := FIND_REPORT_OBJECT('TEST_REP1');message(get_report_object_property(repid, PORT_FILENAME));
-- i can see this message showing the filename as
--C:\temp\9ids\test_rep1.rdf
v_rep := Run_report_object('TEST_REP1');
message('test report')
-- i can see this message but fails to run the report
--with REP-0503
exception
     when others then
     message('Error: '||sqlerrm);
END;
where am i wrong?
Regards,
Sumita

The following code also doesnt work
DECLARE
repid report_object;
v_Rep varchar2(100);
BEGIN
repid := FIND_REPORT_OBJECT('TEST_REP1');
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESTYPE, 'cache');
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESFORMAT, 'pdf');
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_COMM_MODE, ASYNCHRONOUS);
v_rep := RUN_REPORT_OBJECT(repid);
exception
     when others then
     message('Error: '||sqlerrm);
END;
In Java Console error message
<<<
Loading http://lra10241:8888/forms90/java/f90all_jinit.jar from JAR cache
connectMode=HTTP, native.
Forms Applet version is : 90290
oracle.forms.net.ConnectionException: Forms session <3> aborted: unable to communicate with runtime process.
     at oracle.forms.net.ConnectionException.createConnectionException(Unknown Source)
     at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
     at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
     at oracle.forms.net.HTTPNStream.flush(Unknown Source)
     at java.io.DataOutputStream.flush(Unknown Source)
     at oracle.forms.net.StreamMessageWriter.run(Unknown Source)
>>>>>
Please help its urgent

3GS 3.0.1 - Cannot send mail, You did not specify any recipient

Whenever I send a message from iPhone with MobileMe account and then resync the account with server (Push is off), the very same message, already sent with success, appears in Outgoing folder and error pops up saying:
*Cannot send mail, You did not specify any recipient*
See the picture below:
http://gitarzysta.com/iphone/error1.jpg
It cannot be deleted, either - error message pops up saying: *Unable to move message*
http://gitarzysta.com/iphone/error2.jpg
Important: it was sent and received successfully. It is just either iPhone, MobileMe or both that have problems to sync correctly.
On my Mac that I sync with this MobileMe account all is fine.
What can be wrong? There was an old topic here, from 2008, where several users of 3G had exactly the same issue, but no root cause or solution was provided.
Thanks!
Message was edited by: gitarzysta

Try deleting and manually recreating the account on your iPhone.
If you transferred the account settings from your Mac via the iTunes sync process - selected under the Info tab for your iPhone sync preferences with iTunes, deselect this for your iPhone sync preferences followed by selecting Apply before doing so.

Excpetion "You did not specify the transaction currency burden amount".

Hi,
When I am running "PRC: Interface Supplier Costs" then its firing another Program i.e., "AUD: Supplier Costs Interface Audit". In the second Program's output I am getting a message "You did not specify the transaction currency burden amount".
I created and approved an Expense PO and then I created an Invoice (matching that PO) and did the Payment for that Invoice and generated accounting. After that I ran "PRC: Interface Supplier Costs" to transfer the amount to my Project. The Program is ending up with the exception that "You did not specify the transaction currency burden amount".
What could be the reason and how to solve it.
Regards,
Khan.

Hi
Check if your project is set up as burdened, and if the expenditure organization & expenditure type of the PO distribution are supposed to be burdened. Verify that burden multiplier is available in te active burden schecule.
Dina

Cannot Send Mail - You did not specify any recipients

Hi all,
I have an email stuck in my outbox which has the "This message has not been downloaded from the server" issue I have seen on this forum. Everytime I go to my email folders list, I get the 'Cannot Send Mail - You did not specify any recipients' error message. I am unable to trash it, move it as I get the 'Unable to Move Message' error.
Any ideas how I can remove this message and clear my outbox!?
Thanks,

Me too! This is very annoying. I LOVE Apple but this new 3G keeps on throwing curveballs at me. I, too, deleted my e-mail account from my iPhone to get rid of this "unsent message" but with Apple you shouldn't have to do that! Certain that it will happen again, I'm interested if anyone comes up with any fixes so that next time we don't have to delete/add e-mail account.

Hi , i forget my answers and you did not send to my email the answers

hi
i forget my answers and you did not send to my email the answers

You can find all of your previous posts here:
https://discussions.apple.com/people/Osama%20Zaid

What do you do when iBook downloads a book you did not select?

What do you do when iBook downloads a book you did not select?

Welcome to the Apple Community.
Select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History.

ITunes Get Artwork: "Artwork for [album name] cannot be found. You do not have permission to access the requested resource."

I just installed iTunes 10.5 (latest version as of 11 Jan 2012), onto a computer running Windows 7 Ultimate x64. I loaded my music library into it, it compiled the list and separated them by album. But even though I'd assigned most of the albums artwork through my Zune management software (a Microsoft product), almost none of them populated into iTunes. So I went through and started asking the software to try to find album artwork where possible.
I did this a few times album by album, then I decided to select multiple albums and see what happened. No problems. Then I selected all of the albums I had--about 600 in all--and asked it to get artwork. It seemed to process for a bit, then came back with the error, "Artwork for [album name] could not be located. You do not have permission to access the requested resource." I tried this on several individual albums, only to receive that same error.
The very first time I did it, I was told I needed an account with the iTunes store to make it work, so I signed in using an old Apple ID (the account had been inactive for so long it had been locked for security, I unlocked it and that seemed to be that). Then I did what I described above.
The weird thing--to me--is that I can still add artwork to the albums manually if I want to, from imagery stored locally on my own computer. The only thing it seems to have a problem with is when I ask it to go find artwork from the iTunes store.
Do I need to uninstall iTunes and then reinstall it? Did something go wrong with the process of authorizing the computer to work with the iTunes store? Do I need to de-authorize and then re-authorize the computer? Could this be something related to Windows permissions on the iTunes library?

Right on about how to reset the warnings, it was exactly that.
I went through the steps to let iTunes through Windows Firewall, but still get the same problem when I access the iTunes store (and even though I followed the steps in the help file to the letter, I notice it still says iTunes is NOT enabled for it). And now, thanks to the re-enabled warnings, when I try to get it to download artwork for single albums, this is what I get:
"Artwork for [album name] could not be found. An unknown error occurred (-50)."
New results from the diagnostics too:
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
Acer Aspire 8930
iTunes 10.5.2.11
QuickTime 7.7.1
FairPlay 1.13.37
Apple Application Support 2.1.6
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.97
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0034AA84038F17E0
Current user is an administrator.
The current local date and time is 2012-01-13 09:21:52.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce 9700M GT
**** External Plug-ins Information ****
No external plug-ins installed.
The drive Q: SEMC CD-ROM Rev 0001 is a USB 1 device.
iPodService 10.5.2.11 (x64) is currently running.
iTunesHelper 10.5.2.11 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {403AFC2C-1FCE-43B2-B9E8-D414B29FF5D1}
Description: Intel(R) WiFi Link 5100 AGN
IP Address: 10.100.3.244
Subnet Mask: 255.255.248.0
Default Gateway: 10.100.0.1
DHCP Enabled: Yes
DHCP Server: 10.100.0.1
Lease Obtained: Fri Jan 13 09:00:56 2012
Lease Expires: Sat Jan 14 09:00:56 2012
DNS Servers: 202.174.158.10
8.8.8.8
Adapter Name: {B50EA825-FB09-459D-8855-77E5A43E18B1}
Description: Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 04:30:00 1970
Lease Expires: Thu Jan 01 04:30:00 1970
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Basic connection to the store failed.
An unknown error occurred (-50).
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-01-12 07:09:14.

I have converted/copied my itunes oto mp3 format to play on my PC. unfortunatly I didi not specify a different folder fro the mp3's. I therefore have itunes side by side with my mp3's all in the same folder. How can I remove the mp3's into another folder.

I have converted my itunes on my imac to mp3 format so i could play them on my pc. unfortunatly i did not specify a seperate folder for the mp3's to be sent to once converted.
i now have itunes and mp3's side by side in the itunes media folder. this has the effect of doubling my library.
how can i get rid of the mp3's from this folder en mass, other than erasing them one by one, there are 7000!!!

Click on 'Music' in the iTunes sidebar. Look to see whether you have a 'Kind' column:
If you haven't, choose 'View Options' from the 'View' menu and check 'Kind':
Now go to the Music list again and click on the label of the 'Kind' column. This will group all your AACs and MP3s together. Locate the MP3s: click on the top one. Hold the shift key and click on the bottom one to select them all. If you want to save them drag them to a folder on your Desktop. Then hit 'Delete'. IMPORTANT: when promted, choose to have them moved to the Trash, otherwise they will be removed from the list but kept in the actual library.

User did not specify local data drive, MSATA drive

SCCM 2007 R2 SP2 windows 7 x64.
Hi,
I am trying to image Dell M6800 with MSATA drive, but imaging is failing to
User did not specify local data drive
Volume C:\ is not a fixed hard drive
Volume D:\ is not a fixed hard drive
Volume X:\ is not a fixed hard drive
TSM root drive =
We do not find an available volume to store the local data path
Winpe is not finding Msata drive. i have injected new "WinPE3.0-Drivers-A15-47R7V" from dell. no luck. Dispart find disk on 0 fine.
Here is the log file http://1drv.ms/1L7Cw6b
do you i need to install sata driver?
thanks
orion

got it fixed.
1.diskpart
2.list disk
3.select disk #
4.clean
5.create partition primary
6.select partition 1
7.active
8.format quick fs=NTFS
9.assign
10.exit
works great
orion

ERROR: "You did not complete the entire form. Please enter your country."

When I tried to download a song tonight, I got a message that said that my billing info had changed and that I needed to verify it before I could purchase any music. On the "Edit Payment Information" page, I put in all of my info (my address was missing), and hit done. I get the error: "You did not complete the entire form. Please enter your country." Well, the country field is not editable, and but it says "United States," which is the right country. I can't get passed it, so I can't download anything. I'm running the latest version of iTunes... but I haven't purchased anything since.
The other thing that concerns me is that I didn't change any billing info, so this is a bit strange. Does anyone have any ideas of what's going on? Thanks!!

Just in case this ever happens to anyone else, here is how to fix the problem (THANKS, ITUNES SUPPORT)!!
1) Sign out of the iTunes Store by choosing Sign Out from the Store menu in iTunes.
2) Visit Apple's My Info website:
http://myinfo.apple.com
3) Choose your country and preferred language. Then enter your iTunes Store account name and password and click Continue.
4) Choose Address Book from the menu on the left. On the Edit Address Book page, look at your shipping addresses at the bottom. If you have multiple shipping addresses, remove any out-of-date or duplicate addresses by clicking Delete. Also, make sure the state or province field is filled out correctly for each address. To edit an address, click Edit.
5) Now choose Phone Numbers from the menu on the left to look at your phone numbers. The area codes should be in the area code fields and the phone numbers should be in the phone number fields. If an area code is missing, or if it is in a phone number field, your account information may not save properly.
6) Make any other necessary corrections, then click the Save Changes button.
7) Click Log out in the upper-right corner.
When you make your next iTunes Store purchase, you will be asked to review your billing information. At that point, you can change your information or simply click Done. After that, you should be able to purchase items.

OAS: The request did not specify a valid virtual host.

Hi,
we install the OAS 3.01 on our system (NT 4.0 sr 4 Worstation).
we start the AdminListener with:
oswctl start ADMIN
the listener starts sucessfully.
trying accessing on the ADMIN-Page with the IE 4.0
(http://[IP-adress]:8888)
the following message occured:
The request did not specify a valid virtual host.
any idea ???
Thank
Martin
null

Dennis Bourgeois (guest) wrote:
: Peter Siket (guest) wrote:
: : Martin Behrmann (guest) wrote:
: : : Hi,
: : : we install the OAS 3.01 on our system (NT 4.0 sr 4
: Worstation).
: : : we start the AdminListener with:
: : : oswctl start ADMIN
: : : the listener starts sucessfully.
: : : trying accessing on the ADMIN-Page with the IE 4.0
: : : (http://[IP-adress]:8888)
: : : the following message occured:
: : : The request did not specify a valid virtual host.
: : : any idea ???
: : : Thank
: : : Martin
: : Hi Martin,
: : we learned that OAS 3.01 only accepts hostnames. The only
way
: to
: : enable communication is to supply a hosts-file with the
: : appropriate entry. I don't know why but so it works.
: : Peter
: Martin,
: I'm running OAS 4.0.8 but here is a thought... In 4.0.8 if you
go
: to the network properties for your listner and add the IP
address
: there then it works. I also found that if you are using
: something like a Cisco domain controller to do load balancing
: you
: will want to list the IP address of the Domain Controler in
there
: as well.
: Dennis
If you access using the hostname, this will be passed onto the
Application Server in addition to the IP address. The
Application Server will use the hostname details to determine
the listener files to use under the $ORACLE_HOME/ows path. This
means you can more than one set of OAS files and therefore in
theory service two different hostname addresses mapped to the
same IP address.
Nigel.
null

"You did not purchase this item. You can not redownload..."

Has anyone experienced this problem?
I purchased Breaking Bad, Season 5 (season pass) in HD, through my Apple TV. I've received an email receipt from Apple for the purchase, and it's shown up on my credit card recent activity. When I go to play any episode, I get the following message:
"You did not buy this item. You can not redownload [Episode Name]"
I most certainly did. So far, the Apple support has been the typical glazed-eyes, "make sure you're plugged in to the world wide web", "unplug, and plug in after exactly 60 seconds (so all the electrons drain out the back)", not really reading the specific case and symptoms I'm experiencing.
I've been able to "purchase" a free episode of a TV show and, despite a shockingly slow download, it was viewable, and the whole transaction was done directly through the Apple TV.
I was also able to download episodes from iTunes to my computer and watch them that way, but I really don't want the movies on my computer.
If there was a problem with an HDCP handshake between the AppleTV and the television, would an error message like this display?
Thanks in advance if you can help.

i am having the same problem in the last 2 days. does anyone have an answer??? very frustrating, as i have given a lot of money to apple to have the ability to download these shows when they are available.

Server did not recognize user name or password - i have changed password in mobile me. where else does it need to be changed?

Where exactly to my passwords need to match up? I changed my mobile me password and mobileme is working fine. When I try to access my calendar, it gives me the "Server did not recognize user name or password" warning and ical will not load. Where else does my password need to be ch

Hi birdman07,
You need to go into iCal and manually change the password.
iCal > Preferences > Accounts > MobileMe email address (CalDAV) > Account Information
I ran into the same problem when I recently changed my password for MobileMe and this resolved it.

HT201304 Visa has changed for the purchase of Apple products, i did not know how I put the new MasterCard number to finish the process of buying products Thank you

Visa has changed for the purchase of Apple products, i did not know how I put the new MasterCard number to finish the process of buying products Thank you
i have ibad mini
and iphone4
laptop sony
can you sent for me the anser

Changing Account Information > http://support.apple.com/kb/HT1918

REP-0503: You did not specify a name of the report

Similar Messages

Maybe you are looking for