Repair center scenario

hi gurus
my com have 2 plants, one plant is being work as service center for the machinary ,
now this machinary will be comming from  malesia (kind of import)
then it is get repaired here and again sends back to malesia
how i have to map the scenario
i work on manufacturing scenarios so now i need help for this service scenario plz help

Friend
is your facility in india is a 100% EOU ?
Then treat malayasia plant as a vendor buy material X
1. Import PO
2. MIRO for CVD
3. MIGO for GR
4. MIRO LIV
by using production processes convert Material X to Y
Production order with operations, GI and Finished goods GR Y
OR
Create a Cross Company STO and the make use of production processes to convert material X to y and then create antoher Cross company STO to Send material back
ENJOY SAP
Regards

Similar Messages

  • Please help me...major issues with authorized repair center

    I could really use the advice of those more "techie" than myself. About a month ago, my iBook G4 crashed on me. I brought it to an authorized repair center and they replaced the hard drive for $270. When I got it home, it seemed to be acting funny - freezing, slower, etc. I noticed that About this Mac under the Apple menu said it had 128 MB of memory, yet when I brought it into the repair center it had 256 MB. Yet when I installed an extra memory card I had laying around it said 600-something (I forget), which is impossible, because my Mac can only hold 512 MB total. Anyway, very long story short, I've brought it back once to complain that my computer wasn't preforming the way it used to. I was told two things. One, it's because I'm running Tiger on an old machine (bullsh*t, I ran Tiger since July with NO problems). Second, they said my computer is screwy because I'm running 10.4.4, which is known for having bugs. Is this true? The same day they told me there was "nothing wrong with your iBook, sorry" it crashed again, and I can't get it to start! I've made an appointment with the owner of the repair shop, and I'd like to be able to defend myself because I think they screwed up. I'd like them to fix it for free, or refund my money and get the HD back. Any advice is GREATLY appreciated. Sorry this is so long, I love my Mac
    PS...I got it to start for about 3 minutes lastnight before it crashed again. I cannot open the Finder, and anything on the Dock that I try to click on shows a large grey question mark. What's that mean?

    Did you inform the repair center that your RAM reported had dropped? Tiger I would not run on anything less than 512 MB of RAM anyway. I've read stories that repair centers frequently remove any third party RAM you might have installed, and this may be another one such case.
    The gray question mark means the files have basically relocated themselves to someplace the system can't find them. If you didn't move anything, it is possible the directory got munged. To repair the directory, first make sure your data is backed up, and then follow these instructions:
    http://docs.info.apple.com/article.html?artnum=106214
    If that indicates something it can't fix, get Alsoft Disk Warrior 3.0.3.
    It is possible the RAM you have in there is bad, and that may be why you are detecting less RAM too. RAM can go bad at anytime. So can the memory slot itself go bad. And frequently the issues which make it go bad are undetectable by any hardware test. Though if a hardware test detects an issue with RAM, that's believable.

  • What do I do when I get my iPhone back from the repair center?

    What do I do when I get my iPhone back from the repair center?

    If it was replaced then you should be able to restore a back up of your phone
    iTunes: Backing up, updating, and restoring iOS software
    If you received a note it will tell you what they found and why they could not repair. It depends on the situation

  • Nokia Repair Center And Customer Service

    Hello, I am contacting you today regarding a problem that I have with the repair center. The reason that I am contacting YOU, is because no else (Email support or customer services phone numbers) that I have been dealing with seem to know they are doing, and have not been of much assistance at all.
    Now here lies the problem,
    I sent my Nokia N-8 in for warranty repair and it was received and (supposedly) repaired and sent back to me on 3-14-11. When I received the phone a couple of days later I noticed that the problem was not fixed. So I repacked it and and sent it back with a note describing the problem with the phone in detail.
    It was received and signed for by Salas R at the Forth Worth repair center on 3-21-11.
    7 days go by and I notice that the "repair status" of my phone changes from "In queue to evaluated for repair" to "Shipped repair original phone" on 3-14-11.
    Now how could my phone be shipped on 3-14 when it wasn't received until 3-21.
    This was the old ship date and included with it was the old tracking number.
    So begins the emails and phone calls.
     Every email reply was very generic  and could have been sent to anyone, never answering my questions or making any references to my specific problem. (like they didn't even bother reading my email)
    There was no indication of when or how this matter would be resolved, only promises of a phone call that took about 3 days and 2 more emails to come.
    When I finally received a call on 4-4-11 The person told me that my phone was shipped to me on 3-30-11 but he did not have any tracking information. He said he would get that information and call me back. He did not. So The following day 4-5-11 I called back and I was told that the person who was handling my case was not in and that he would be in at 12:00 pm
    Eastern time and he would call me.
    He did not call.
    So I called back. Now, I was told  that they would have to contact the repair center and find out the status of my phone.
    You mean to tell me that I been sending emails and making phone calls for a week and nobody has contacted the repair center to find out what happened to my Phone.
    What have they been doing?
    So this person does call me back about 10 minutes later and says they have lost my phone and that they would send me a new one, BUT, they don't have any in stock.
    So I ask him, why is it that on the Nokia website it shows all colors of the N-8 As  "IN STOCK".
    His reply was "those are for the sales department".
    So you mean that if anyone wants to buy a new N-8 you have one for them, But for me,  who's phone YOU LOST, You don't have any.  
    Nothing for the person that has been without a phone  for a month now due to YOUR incompetence.
    Now I ask you, Is this how you do business. Is this how Nokia operates. I sent my phone for warranty repair and you lost it. SO REPLACE IT.
    I understand mistakes are made. We all make mistakes,
    But you have to accept responsibility for them. I just want my phone back.
    If you have any interest in helping me with this matter here is some information that might be useful to you.
    My case number is: 1-11589768441

    Unfortunately my friend, as sad and annoying as your story is, this is a user to user help forum and issues such as yours need to be resolved with Nokia Direct, you can try the contact us section on the web site, or persist with the repair centre that lost your phone, but other than offer sympathy, there is nothing anyone here can do to help you 
    Good luck, and I hope your replacement arrives quickly !
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • Does anyone know of a reputable repair center  for the Touch in Ohio or elsewhere?

    We are interested in finding a reputable repair center that works on replacing antennas in the ipod touch? Any suggestions?

    Go to your Safari menu bar click Safari / Safari Extensions.
    You may find something in the Productivity category.

  • Repair center warranty process

    Hey guys 
    I have a dv9700t laptop which is like 3 years old and still under warranty. 
    my screen burnt out  part # 
    "447990-001 
    17.0-inch WSXGA+ TFT WVA bright view (BV) dual lamp display panel - Features the glossy bright view (BV) technology - With microphone and webcam"
    HP tells me they dont have the part so I was upgraded to a case mamanger who asked me to sent it in because service senter might have the part...
    My question: If HP does not have the part how could the service center have it? where do they get their parts from? I am hoping they dont have it and I get a n upgarde computer probably a dv7t 
    is there a way to find out what the repair center has in stock and how they deal with it when they dont have it?
    has anyone gotten an upgrade computer from a case manager for parts not being availble for their old computer 
    thanks guys

    sorry to hear but in all honesty, it is your responcibilty to secure your data; not theirs.  making an image of your system and saving to an exernal drive for safe keeping would have been the prudent thing to do.  I've never heard of a repair being made that quickly.  Typically the user is w/o their computer for a few weeks or longer.
    L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

  • Please Repair Center contact info.

    I need an e-mail in order to contact with the repair center. I have one thinkpad X200 under warranty and I need a way to contact with them because my laptop died while ago. I have contacted by phone but it would be easier if I had a way to contact by e-mail, I'm living on spain so I don't speak english very well.
    What I need to tell them is that I have family on the US and what should I do?, ship my laptop directly to Lenovo or my family. The main problem is that I want to contact with them instead my family because the laptop needs repair and it would be easier if I had an email. Thank you. If that's not possible I will need at least a phone to contact with the repair service of lenovo, not the contact number that is showed on the page of lenovo.com.

    Submit a technical question or open a service request.
    I don't work for Lenovo. I'm a crazy volunteer!

  • Repair center made it much worse

    My T420 stopped working this week, the screen was just showing garbage, so I took it to a local authorized repair center (Victoria, BC). When I picked it up a few days later, the case was not put together correctly. There are large gaps on all sides, the border around the LCD panel is not fastened correctly, and the bottom of the plastic case is actually broken, one corner is completely missing. 
    I called Lenovo technical support and I was told to return it to the same repair shop. Is there any way to get this dealt with without dealing with the same people who screwed up the original repair?

    Hey table,
    I sent you a PM, to see about getting you some assistance.
    Thanks!
    Ty

  • Need the 800 number for repair center

    need the 800 number for the repair center in Grapevine TX

    Here are some HP CD/DVD Burners at Newegg.  One of them should work for you.
    As for installing the drive, it should be fairly easy.  If both sides of the case can be removed, it will make it much easier.  Just make notes when you remove the old one.  This is what I do when I replace any component.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • My n80 crashed by the repair center

    I purchased my phone last May 2006. I dropped it once and after it, the screen just goes blank sometimes so I send it to a (third party) repair center, thinking it would just be the flex... and they said it was. But they don't have the parts available for it. so I checked the nokia support in the website looking for a local authorized repair center. That's where I saw Brightpoint in Escario St. Cebu. Before they receive the phone, they knew that it is still working and I can still make calls with it. To make the story shorter, I can't use my phone now. It will not turn on. They said that after they reflashed the ROM or the firmware (im not sure), the phone did not respond. And when after awhile, they said the motherboard is damaged. I called Manila for help...and there is no one there to help. I've been a nokia customer since nokia launched the first nokia phone in the philippines..purchasing nokia phones almost every high-end's release. I hope someone can help me with this.

    I don't think the motherboard is the issue here.
    As a matter of fact, they received it as working...just with blank screen. I don't think I broke it... I'm pretty sure, one of their technician did it. In the first place, why did they not tell us through the phone when I called, that the motherboarf is broken. Why is it that they kept on saying that it was caused by reflashing the phone. They don't have fix reason. All I have now is a dead n80 phone. What a pain...
    Thank you for replying...I appreciate it.

  • Sony repair center lost my phone. Customer support is hanging up on me.

    I really hope someone can help me or at least point me in the right direction. I sent in my xperia z3 d6603 for repair over 3 months ago. 2 weeks later I was informed the repair was complete and the phone was being shipped back to me. A week later, having still not receieved the phone, I checked the tracking number and saw that Sony had contacted UPS and requested the phone be returned to them. This is the last I ever heard of the phone. I called support and was told I would be contacted by the repair center. I was never contacted. I called several more times and was told someone would contact me. I still have not been contacted. I still call the support center every few days in the hope someone can help me. The support reps either lie and tell me the phone is in the mail and I will receive a tracking number which never comes, or they simply put me on hold until I am disconnected. I don't know who else to contact. This has been going on for over 3 months now and its starting to seem like I will never get my phone back. I don't know who else to contact since customer support doesn't seem to have the ability to resolve this issue.

    I'm sorry to hear that but if UPS lost the phone I believe there's an insurance that will cover this issue. Also it'll be wise to contact BBB http://bbb.org/
    and if you contact Sony Xperia Care again, make sure to try to do it through live chat. 
    http://support.sonymobile.com/global-en/contactUs/
    @johnp
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Better to Repair LCD at Toshiba or 3rd Party Repair Center?

    I have a toshiba satellite u3050-s5097. When I turn it on, the screen is very dim, pretty much black unless if I shine a light at it and I can barely see my desktop. Well I had it inspected by a 3rd party laptop repair center and they said the light is out and the LCD is not working so they have to replace entire LCD... for parts and labor it will total $633.53 so I am looking to see if it will cost less to have my LCD fixed by Toshiba (I'm not sure what the process and cost for them to maybe... order from Toshiba, s/h and etc) or would this be the average cost for this type of repair?
    Any advice would greatly be appreciated.
    Thank you,
    Linda

    THANK YOU very much for your advice and time.
    yes it is a U305.
    I just called toshiba repair center and they will fix and replace the lcd panel for a flat rate of $425...
    anybody who has experience, story or advice, I'd greatly appreciate it!
    I'm on a budget like many of us, that is why I'm trying to save my laptop...
    But in case anybody who would like to suggest some afforadable laptop that is better than my satellite U305-s5097, I would greatly appreciate it! I'm trying to learn more about computer specs and find out which ones are better for the work I do as well... I'm looking for a laptop that will work well around multi media work... film editing, music, gaming... or if you have a good link to help me learn more about computers/laptops so I could better understand what to look for in performance of the perfect laptop for me, that would be great as well!
    Thank you,
    Linda.

  • Service/repair center

    is there any service/ repair center for BB torch 9810 here in phils..? tnx....

    Hi tn28,
    This sounds to me as a reason to get back in touch with local support.
    I would strongly advise against guessing which one it is and to call and clarify with them.
    A short call might save you a lot of headaches in the future.
    Gracias y Saludos,
    Miguel A. González
    Spanish Community Manager
    Comunidad en Español  English Community  Deutsche Community   Русскоязычное Сообщество
    Los puntos de vista y asesoria que expreso aquí son míos y no reflejan necesariamente la posicion oficial de Lenovo.
    Es importante recalcar también que los foros suplementan los recursos de los usuarios de Lenovo pero no reemplazan el servicio técnico oficial. Para un listado de números de servicio sigue el enlace: Numeros de Soporte

  • Repair Center hours of operation?

    Does anybody know the Repair center hours of operation? I would like to call them, but when I do, I get into a queue, with no indication of how much time I will have to wait for a person to answer. I was on hold for about 30 minutes over the weekend, but then began to wonder if they are even open.
    Does anyone have an email or webform that can be used to initiate a repair ticket? I don't really have time to wait on hold for an hour.....especially if I'm waiting on hold in an after hours situation when my call will never be answered, yet I'll be allowed to wait on hold with no info.
    Thanks in advance!!
    MP

    One should NEVER try to update the bios using WIndows on a system that isn't working properly.  It's best to update it using a self booting disk. 
    the good news is that as long as the Boot Block hasn't been borked (and in a properly written bios it shouldn't be) you can create a self booting bios update disk that should repair the problem.  You will need to setup a self booting disk with the bios flash utility and bios file and an autoexec.bat file configured to run the flash utility automatically.  How you go about this depends on what type of bios you have (AMI, Award, or Phoenix).  This link covers the basics, but may not handle every possible situation.
    Good luck and remember to NEVER update the bios from within WIndows.
    If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

  • Laptop keyboard that Repair Center took picture of is not the same as the one I mailed in

    A little over a week ago I sent my DV7 laptop into HP to have the sound fixed, apparently the sound ports had gone bad. Nothing else was wrong with the machine.  I had worked with the chat technician for around 45 minutes, allowing him access to the computer and all he could find was that the sound ports hardware neeed replacing. Again, the machine was working beautifully except for the sound. After I got the box, I got it correctly packed and picked up by FedEx. After a week I get a call from support telling me there is water or liquid damage not covered by the warranty, do I want to pay $240 to get it repaired. I knew there had never been water damage to my machine. I argued with him and he came down fifty percent to $117. I was not happy. But later, when I got the pictures, I knew from the picture of the keyboard with water spots that it was not mine. I called back and this person allowed me to go up the ladder to the Escalation team. I was called back and the charge I paid with a credit card would either not be charged or reimbursed. I was happy about that until...
    Until I got this note about the repair and the parts needed for repair
    FAN - HEAT SINK
    1 685445-001 SYSTEM BOARD
    1 684559-001 TOP COVER - TOUCHPAD
    685445-001 KEYBOARD
        Had all these parts had been bad, I could not have continued to use my machine with no problems for 2 days, let alone allow a tech to enter my machine with the applet I installed to see the inside and control it. All that was wrong with the machine I sent in was sound. The machine they are saying is fixed is not mine. And, as I said, the picture of the water stained keyboard/ control pad almost looke photoshopped. That was not the machine I had put into the FedEx box a week before. Anyone ever heard of something like this?  Again, this machine had no water damage ever while I had it. It was not until HP service got their hands on it was there anything like this. 
    I am receiving a machine by Tuesday. I don't even know, after all this that it will be my machine. I know I had several stickers on the top of the machine so that will be one test. Of course finding the serial number may be the next, unsure of that. I always just let HP go into my machine when I chat online for help to find all that info. But, my Lord, the pictures sent to me were horrible. Like something left outside in the rain for days. This machine was wonderful and I never would have allowed anything to happen to it that HP has said had happened. I am sure, as I said, that I would not have been able to use it for several days as I waited for the box if it was as the service center said and sent pictures of. I am at a loss. Could it all be just a mistake? Again, I will see on Tuesday, April 1 and write back here about what is what. 
    UPDATE: Though not an explanation of the mystery, HP truly made up for all the worry and confusion of the mysterious water damage. I am very happy all round about everything. 
    This question was solved.
    View Solution.

    HI
    I just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.
    To check your private messages, sign into the HP forum
    In the upper right corner of the page you will see an icon of an envelope. Click on it to view messages. When there is a message there will be a number beside to indicate how many.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Maybe you are looking for

  • Can I install my old internal hard drive into my new G5?

    Hello All, I've just purchased a new computer: Apple Mac Pro CTO 2GB (4 x 512MB) Two 3GHz Dual-Core Intel Xeon 500GB 7200-rpm Serial ATA 3Gb/s NVIDIA GeForce 7300 GT 256MB (single e-link DVI/dual-link DVI) My old computer is a PMG4, Dual 1Ghz, 1GBRam

  • Preview's PDF text select ignores columns and misses word spaces

    I have a number of scanned pdf newspaper articles that I was attempting to copy the text from. Preview appears to register the existence of columns, as there is a pale blue background between the columns. However when I use the text select tool, it c

  • Blurry text after Tabbed Cycler runs on IE

    http://faculty.medicine.iu.edu/mentoring/ So three quotes rotate through on this page using the TabbedPanelsCycler that I found on the forum long ago. I recently have been getting complaints that as the second panel rotates the fonts dont render out

  • Error while installing 4.6 C IDES

    Hi, I am installing SAP 4.6 c  IDES on windows 2003 server with sql serer 2005 database. Initially i installed SQL server with  charset cp850 and sortorder bin_cp850. Next when i run R3SETUP file . I got the error as Error: DBCOMMONDBENV_NT_MSS Subst

  • Dmenu autostart.

    Hello everyone! I recently switched over to Arch and decided to try AwesomeWM (as someone said, all the cool kids are doing it), and everything has been smooth up till now. I want to dmenu to start as I start x from the command line. I added /usr/bin