Repair / Subcontracting with non standard mov types.
Dear friends,
I have copied mov type 541 to 941 , 542 to 942 and 543 to 943.
When I post trhu MB1B .. with mov.type 941 , and receive it via MIGO with mov type 101 the system is determining the mov type 543 and not the 943 as we do need.
Does anyone knows if I got to change this behavior ?
This scenario is to use the same functionality of Subcontracting to repair materials. Other Ideas ?
best regards,
Ale
Hi,
Please go to the transaction code- ' OPKA ' and in the 'Parts Provided' column of the table replace 543 with 943 movement type for the movement type 101.Save your data and try again the process.
Please note that, the standard Sub-contracting procedure (541-101(543)) will be impacted with this change.
Regards,
Narayana.
Similar Messages
-
Overwrite Standard Movement types with Z movement types in MI10
Dear All,
We have a requirement where we need to replace standard movement types 701 and 702 with Z movement types in transaction MI10. Would there be any exit or BADI in MI10 which would serve this purpose?
We also tried cloning the transaction MI10 but some checks on the TCODE is giving an issue.
Any one come across a similiar requirement, kindly help.
Thank you.
Johnson
Edited by: Johnson Ittyerah on Dec 19, 2007 2:20 PMfollowing badi may help to change the movement types:
MB_DOCUMENT_BADI
Regards,
Gopi ,
reward points if helpfull. -
We are using a non-standard true type font (Zurich Ex BT) when creating a .pdf document but when others view it, the font is changed on their computers. How do we use this font and keep it from being changed when others look at it?
This is actually good stuff and well written but I hesitate to advise people to use either the "oven trick" or really even the heat gun method as both are notriously short-lived even if they appear effective. Your far better bet is to send the board in to one of the vendors on the internet who are set up to do a proper reball. Even those fixes are good for maybe 12-18 mos. But again, you get a high grade for spelling it out.
-
Trace the reference Standard movement type from customized movement type
Hi,
In my system there are few customized movement type.
Can I know which Standard movement type was used as reference to create the customized movement type.try table t156 table .. put your mvt type and see the BUSTR field for the reference mvt
-
The finished products that are sold are received/returned back from the customer.
These returned goods from customers are basically for rechecking, testing, callibration.
once these activities are done, they are send back to the customer. These all are done free of cost.
It is not sales returned.
Since these goods still belongs to the customer so cannot be valuated in our plant.
We want to keep this goods in the plant with zero value.
how this can be done? can we create a movement type that is non valuated.
Currently when we in this material, system understands it as a sale return and show us the price.In movement type 511, the transaction/event ket PRD and account modifier PRA is assigned. It means that the value flows to account assignment object.
I tried with mvt 511, by giving customer number, the system is asking for account determination of PRD and PRA for the valuation class, that I understand this since I have not done the OBYC for PRD of PRA.
Before doing these settings for PRD in OBYC for PRA, I want your opinion on this.
if i do these settings the value will effect my existing stock and some value will go into PRD account.
More over if you go to OMJJ, settings of movment type, in account grouping node you will find that for 511 mvt, the first line is having value update tick and the second row is having valuation and qty update tick in both the check boxes.
I think all movement types leads to either update of stock account or a consumption a.ccount.
451 is for blocked stock, this is not going to help us.
But this movement type can lead to PRD ( price difference)
please comment -
Stock not updated after GR with 103 & 105 movement types
Hi All
I have raised one GR(MIGO) with ref to PO and movement type as 103(GR for PO with GR blocked stock).
The same was released in MIGO using movement type '105'and stock type selected 'Unrestricted use'.
After first step, In MMBE stock updated under 'GR Blocked Stock'.
But after second step no stock was updated in 'Unrestricted use'.
the actual scenario is:
The receipts from vendor for a PO need to be blocked and then later should go to unresticted use.
Can any body help me how to address this and Tcodes need to be used.
Regards
Nageswara...Hi GSC
Thanks for your reply and it is some what understandable.I have few more questions.
1.Is it possible to create PO with out Account and Costcenter not assigned. If so what is the impact.
2.My current settings were not allowing to create the PO with GL account and Costcenter.
M just confused with the "PO with account assignment" concept. Could you spare some time for this and help me to understand?
Thanks in advance
Nageswara... -
Problem with DII client for Doc/Literal with non built-in type in WL8.1 Sp2
Hello,
I have been trying to make this DII client for doc/literal using non built-in type to work for 2 days now.
Any help/input will be greatly appreciated. I have added the code and wsdl below.
BTW this is using the code first approach.
Works perfectly fine with the clientgen generated stubs. But not with DII.
With the stubs, following is the SOAP envelope.
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<env:Header/>
<env:Body>
<n1:getType xmlns:n1="http://www.aeb.com/wlws">
<n2:id xmlns:n2="java:com.aeb.types">XYS</n2:id>
<n3:name xmlns:n3="java:com.aeb.types">Name</n3:name>
</n1:getType>
</env:Body>
</env:Envelope>
With DII (using the serializer/deserializer generated by clientgen),
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<env:Header/>
<env:Body>
<n1:TestType xmlns:n1="java:com.aeb.types">
<n1:id>ABC</n1:id>
<n1:name>Some Name</n1:name>
</n1:TestType>
</env:Body></env:Envelope>
Exception
javax.xml.rpc.soap.SOAPFaultException: Unable to find a matching Operation for this remote invocation
<n1:TestType xmlns:n1="java:com.aeb.types">
<n1:id>ABC</n1:id>
<n1:name>Some Name</n1:name>
</n1:TestType>.
Please check your operation name.
at weblogic.webservice.core.ClientDispatcher.receive(ClientDispatcher.java:313)
at weblogic.webservice.core.ClientDispatcher.dispatch(ClientDispatcher.java:144)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:457)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:443)
at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:558)
at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:411)
at com.amgen.webservice.clients.DocClient.callService(DocClient.java:83)
at com.amgen.webservice.clients.DocClient.main(DocClient.java:35)
Client
System.setProperty("javax.xml.rpc.ServiceFactory","weblogic.webservice.core.rpc.ServiceFactoryImpl");
System.setProperty("weblogic.webservice.verbose", "true");
String targetNamespace = "http://www.aeb.com/wlws";
ServiceFactory factory = ServiceFactory.newInstance();
QName serviceName = new QName(targetNamespace, "DocWebservice");
QName portName = new QName(targetNamespace, "DocWebservicePort");
QName operationName = new QName(targetNamespace, "getType");
Service service = factory.createService(serviceName);
TypeMappingRegistry registry = service.getTypeMappingRegistry();
TypeMapping mapping = registry.getTypeMapping(SOAPConstants.URI_NS_SOAP_ENCODING);
mapping.register(TestType.class, new QName("java:com.aeb.types","TestType"), new TestTypeCodec(), new TestTypeCodec());
Call call = service.createCall();
call.setOperationName(operationName);
call.setPortTypeName(portName);
call.setProperty(Call.SOAPACTION_USE_PROPERTY, new Boolean(true));
call.setProperty(Call.SOAPACTION_URI_PROPERTY, "");
call.setProperty(Call.OPERATION_STYLE_PROPERTY, "document");
call.addParameter("testType", new QName("java:com.aeb.types","TestType"), TestType.class, ParameterMode.IN);
call.setReturnType(new QName("java:com.aeb.types", "TestType"),TestType.class);
call.setTargetEndpointAddress("http://localhost:7001/wlws/DocWebservice");
TestType type = new TestType();
type.setId("ABC");
type.setName("Some Name");
TestType res = (TestType) call.invoke(new Object[] { type });
System.out.println(res.getName());
TestType.java
package com.aeb.types;
import java.io.Serializable;
public class TestType implements Serializable {
private String id;
private String name;
public String getId() {
return id;
public void setId(String id) {
this.id = id;
public String getName() {
return name;
public void setName(String name) {
this.name = name;
DocWebservice.java
package com.aeb.webservices;
import com.aeb.types.TestType;
public class DocWebservice {
public TestType getType(TestType type) {
System.out.println("In Server....");
System.out.println("Received : " + type.getName());
return type;
ServiceGen Ant Task
<servicegen destear="${dist.dir}/wlws.ear" contexturi="wlws">
<service javaClassComponents="com.aeb.webservices.DocWebservice"
generateTypes="True"
targetNamespace="http://www.aeb.com/wlws"
serviceName="DocWebservice"
serviceURI="/DocWebservice"
style="document">
<client packageName="com.aeb.ws.doc.client" />
</service>
</servicegen>
WSDL
<?xml version="1.0" encoding="UTF-8"?>
<definitions xmlns:tns="http://www.aeb.com/wlws" xmlns:wsr="http://www.openuri.org/2002/10/soap/reliability/"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:soap12enc="http://www.w3.org/2003/05/soap-encoding" xmlns:conv="http://www.openuri.org/2002/04/wsdl/conversation/"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:s="http://www.w3.org/2001/XMLSchema"
xmlns="http://schemas.xmlsoap.org/wsdl/" targetNamespace="http://www.aeb.com/wlws">
<types xmlns:tns="http://www.aeb.com/wlws"
xmlns:wsr="http://www.openuri.org/2002/10/soap/reliability/"
xmlns:http="http://schemas.xmlsoap.org/wsdl/http/"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:soap12enc="http://www.w3.org/2003/05/soap-encoding"
xmlns:conv="http://www.openuri.org/2002/04/wsdl/conversation/"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:s="http://www.w3.org/2001/XMLSchema"
xmlns="http://schemas.xmlsoap.org/wsdl/">
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:stns="http://www.aeb.com/wlws"
xmlns:tp="java:com.aeb.types"
elementFormDefault="qualified"
attributeFormDefault="qualified"
targetNamespace="http://www.aeb.com/wlws">
<xsd:import namespace="java:com.aeb.types">
</xsd:import>
<xsd:element xmlns:tp="java:com.aeb.types"
type="tp:TestType"
name="getType"
nillable="true">
</xsd:element>
<xsd:element xmlns:tp="java:com.aeb.types"
type="tp:TestType"
name="getTypeResponse"
nillable="true">
</xsd:element>
</xsd:schema>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:stns="java:com.aeb.types"
elementFormDefault="qualified"
attributeFormDefault="qualified"
targetNamespace="java:com.aeb.types">
<xsd:complexType name="TestType">
<xsd:sequence>
<xsd:element type="xsd:string"
name="id"
minOccurs="1"
maxOccurs="1"
nillable="true">
</xsd:element>
<xsd:element type="xsd:string"
name="name"
minOccurs="1"
maxOccurs="1"
nillable="true">
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
</types>
<message name="getType">
<part xmlns:partns="http://www.aeb.com/wlws"
name="testType"
element="partns:getType">
</part>
</message>
<message name="getTypeResponse">
<part xmlns:partns="http://www.aeb.com/wlws"
name="result"
element="partns:getTypeResponse">
</part>
</message>
<portType name="DocWebservicePort">
<operation name="getType">
<input message="tns:getType">
</input>
<output message="tns:getTypeResponse">
</output>
</operation>
</portType>
<binding type="tns:DocWebservicePort"
name="DocWebservicePort">
<soap:binding style="document"
transport="http://schemas.xmlsoap.org/soap/http">
</soap:binding>
<operation name="getType">
<soap:operation style="document"
soapAction="">
</soap:operation>
<wsr:reliability persistDuration="60000">
</wsr:reliability>
<input>
<soap:body namespace="http://www.aeb.com/wlws"
use="literal">
</soap:body>
</input>
<output>
<soap:body namespace="http://www.aeb.com/wlws"
use="literal">
</soap:body>
</output>
</operation>
</binding>
<service name="DocWebservice">
<port name="DocWebservicePort"
binding="tns:DocWebservicePort">
<soap:address location="http://localhost:7001/wlws/DocWebservice">
</soap:address>
</port>
</service>
</definitions>
Thanks
AspertHello,
I have been trying to make this DII client for doc/literal using non built-in type to work for 2 days now.
Any help/input will be greatly appreciated. I have added the code and wsdl below.
BTW this is using the code first approach.
Works perfectly fine with the clientgen generated stubs. But not with DII.
With the stubs, following is the SOAP envelope.
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<env:Header/>
<env:Body>
<n1:getType xmlns:n1="http://www.aeb.com/wlws">
<n2:id xmlns:n2="java:com.aeb.types">XYS</n2:id>
<n3:name xmlns:n3="java:com.aeb.types">Name</n3:name>
</n1:getType>
</env:Body>
</env:Envelope>
With DII (using the serializer/deserializer generated by clientgen),
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<env:Header/>
<env:Body>
<n1:TestType xmlns:n1="java:com.aeb.types">
<n1:id>ABC</n1:id>
<n1:name>Some Name</n1:name>
</n1:TestType>
</env:Body></env:Envelope>
Exception
javax.xml.rpc.soap.SOAPFaultException: Unable to find a matching Operation for this remote invocation
<n1:TestType xmlns:n1="java:com.aeb.types">
<n1:id>ABC</n1:id>
<n1:name>Some Name</n1:name>
</n1:TestType>.
Please check your operation name.
at weblogic.webservice.core.ClientDispatcher.receive(ClientDispatcher.java:313)
at weblogic.webservice.core.ClientDispatcher.dispatch(ClientDispatcher.java:144)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:457)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:443)
at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:558)
at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:411)
at com.amgen.webservice.clients.DocClient.callService(DocClient.java:83)
at com.amgen.webservice.clients.DocClient.main(DocClient.java:35)
Client
System.setProperty("javax.xml.rpc.ServiceFactory","weblogic.webservice.core.rpc.ServiceFactoryImpl");
System.setProperty("weblogic.webservice.verbose", "true");
String targetNamespace = "http://www.aeb.com/wlws";
ServiceFactory factory = ServiceFactory.newInstance();
QName serviceName = new QName(targetNamespace, "DocWebservice");
QName portName = new QName(targetNamespace, "DocWebservicePort");
QName operationName = new QName(targetNamespace, "getType");
Service service = factory.createService(serviceName);
TypeMappingRegistry registry = service.getTypeMappingRegistry();
TypeMapping mapping = registry.getTypeMapping(SOAPConstants.URI_NS_SOAP_ENCODING);
mapping.register(TestType.class, new QName("java:com.aeb.types","TestType"), new TestTypeCodec(), new TestTypeCodec());
Call call = service.createCall();
call.setOperationName(operationName);
call.setPortTypeName(portName);
call.setProperty(Call.SOAPACTION_USE_PROPERTY, new Boolean(true));
call.setProperty(Call.SOAPACTION_URI_PROPERTY, "");
call.setProperty(Call.OPERATION_STYLE_PROPERTY, "document");
call.addParameter("testType", new QName("java:com.aeb.types","TestType"), TestType.class, ParameterMode.IN);
call.setReturnType(new QName("java:com.aeb.types", "TestType"),TestType.class);
call.setTargetEndpointAddress("http://localhost:7001/wlws/DocWebservice");
TestType type = new TestType();
type.setId("ABC");
type.setName("Some Name");
TestType res = (TestType) call.invoke(new Object[] { type });
System.out.println(res.getName());
TestType.java
package com.aeb.types;
import java.io.Serializable;
public class TestType implements Serializable {
private String id;
private String name;
public String getId() {
return id;
public void setId(String id) {
this.id = id;
public String getName() {
return name;
public void setName(String name) {
this.name = name;
DocWebservice.java
package com.aeb.webservices;
import com.aeb.types.TestType;
public class DocWebservice {
public TestType getType(TestType type) {
System.out.println("In Server....");
System.out.println("Received : " + type.getName());
return type;
ServiceGen Ant Task
<servicegen destear="${dist.dir}/wlws.ear" contexturi="wlws">
<service javaClassComponents="com.aeb.webservices.DocWebservice"
generateTypes="True"
targetNamespace="http://www.aeb.com/wlws"
serviceName="DocWebservice"
serviceURI="/DocWebservice"
style="document">
<client packageName="com.aeb.ws.doc.client" />
</service>
</servicegen>
WSDL
<?xml version="1.0" encoding="UTF-8"?>
<definitions xmlns:tns="http://www.aeb.com/wlws" xmlns:wsr="http://www.openuri.org/2002/10/soap/reliability/"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:soap12enc="http://www.w3.org/2003/05/soap-encoding" xmlns:conv="http://www.openuri.org/2002/04/wsdl/conversation/"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:s="http://www.w3.org/2001/XMLSchema"
xmlns="http://schemas.xmlsoap.org/wsdl/" targetNamespace="http://www.aeb.com/wlws">
<types xmlns:tns="http://www.aeb.com/wlws"
xmlns:wsr="http://www.openuri.org/2002/10/soap/reliability/"
xmlns:http="http://schemas.xmlsoap.org/wsdl/http/"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:soap12enc="http://www.w3.org/2003/05/soap-encoding"
xmlns:conv="http://www.openuri.org/2002/04/wsdl/conversation/"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:s="http://www.w3.org/2001/XMLSchema"
xmlns="http://schemas.xmlsoap.org/wsdl/">
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:stns="http://www.aeb.com/wlws"
xmlns:tp="java:com.aeb.types"
elementFormDefault="qualified"
attributeFormDefault="qualified"
targetNamespace="http://www.aeb.com/wlws">
<xsd:import namespace="java:com.aeb.types">
</xsd:import>
<xsd:element xmlns:tp="java:com.aeb.types"
type="tp:TestType"
name="getType"
nillable="true">
</xsd:element>
<xsd:element xmlns:tp="java:com.aeb.types"
type="tp:TestType"
name="getTypeResponse"
nillable="true">
</xsd:element>
</xsd:schema>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:stns="java:com.aeb.types"
elementFormDefault="qualified"
attributeFormDefault="qualified"
targetNamespace="java:com.aeb.types">
<xsd:complexType name="TestType">
<xsd:sequence>
<xsd:element type="xsd:string"
name="id"
minOccurs="1"
maxOccurs="1"
nillable="true">
</xsd:element>
<xsd:element type="xsd:string"
name="name"
minOccurs="1"
maxOccurs="1"
nillable="true">
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
</types>
<message name="getType">
<part xmlns:partns="http://www.aeb.com/wlws"
name="testType"
element="partns:getType">
</part>
</message>
<message name="getTypeResponse">
<part xmlns:partns="http://www.aeb.com/wlws"
name="result"
element="partns:getTypeResponse">
</part>
</message>
<portType name="DocWebservicePort">
<operation name="getType">
<input message="tns:getType">
</input>
<output message="tns:getTypeResponse">
</output>
</operation>
</portType>
<binding type="tns:DocWebservicePort"
name="DocWebservicePort">
<soap:binding style="document"
transport="http://schemas.xmlsoap.org/soap/http">
</soap:binding>
<operation name="getType">
<soap:operation style="document"
soapAction="">
</soap:operation>
<wsr:reliability persistDuration="60000">
</wsr:reliability>
<input>
<soap:body namespace="http://www.aeb.com/wlws"
use="literal">
</soap:body>
</input>
<output>
<soap:body namespace="http://www.aeb.com/wlws"
use="literal">
</soap:body>
</output>
</operation>
</binding>
<service name="DocWebservice">
<port name="DocWebservicePort"
binding="tns:DocWebservicePort">
<soap:address location="http://localhost:7001/wlws/DocWebservice">
</soap:address>
</port>
</service>
</definitions>
Thanks
Aspert -
Re -Reconcillation of subcontracting challan against "102" mov type mat doc
Dear All,
While we are doing the reconcilliation of the Material document (mov type-"102" ) against the subcontracting challan (ALREADY fully reconcilled against 101 material document, but not compeleted), then system is NOT allowing us to do the reconcillation, requirement is to reduce the qty assignment in already reconcilled challan, as we have reversed the material document
1.) When we have assigned the 102 movement type to movement type group to 0001( Issue movement type group)
then system is giving an error message : 8I567-Challan not valid, Material doc. is valid for another scenario during J1IFQ.
2.) and when we are assigning the 102 movement type to movement type group 0002( Receipt movement type group) , then system gives error message : 8I574 -Material XXX is not assigned fully, short by YYY KG
Please suggest the right way of doing it.
Thanks & Regards
Nitin ChhabraHi
If a challan is reconciled it should not be opened again. That is illegal. You need to do subsequent adjustment if you want to alter your consumption in subcontract. If you do 102 and reverse your consumed material,You need to include 544 movement type in your movement type grouping then You need to create a new 45a challan.
Regards
Antony -
Protecting Apache URLs ending in '/' with non-standard DirectoryIndex
I'm using Apache agent 2.2 for Acces Manager 7. My Apache version is 1.3.33. I have a DirectoryIndex line in my httpd.conf like so:
DirectoryIndex index.cgi index.html
So when I request the URL <http://server.edu/subdir/> I should get <http://server.edu/subdir/index.cgi>.
My problem is when URLs like this are protected by Access Manager. I have an inverted notenforced_list, which contains http://server.edu/subdir*. So only stuff in subdir should be controlled by AM. I want all 3 of these URLs to give the same results:
http://server.edu/subdir
http://server.edu/subdir/
http://server.edu/subdir/index.cgi
The first and third URLs work as expected; the second one (with a trailing '/') doesn't work. If I change my notenforced_list to read http://server.edu/subdir/*, then only the third (complete) URL works.
By looking at the agent logs in debug mode, it appears that AM is first looking at policy for http://server.edu/. That test passes, since that URL is part of the (inverted) notenforced_list.
Then the agent goes on to check the /subdir URL -- but it tacks on index.html:
2006-04-20 14:06:58.144 Debug 10883:252998 PolicyAgent: get_request_url(): Returning request URL http://server.edu/subdir/index.html.
Then it goes on to say that it will enforce policy on this URL, which is correct, but it's referring to index.html, not index.cgi. I'm never prompted for authentication, I just get a browser error that says the page cannot be displayed. If I ask explicitly for http://server.edu/subdir/index.cgi, everything works as expected -- I'm redirected to the AM server and prompted to authenticate, then redirected back to the URL I originally requested.
Am I missing something here? Has anyone else tried to protect URLs ending in '/' with a non-standard name?Here is the log extract. You can see pretty clearly that it just tacks on 'index.html' to the end of the original URL, when it gets to the 2nd phase of the policy evaluation (after checking for root-level policy). Thanks for taking a look!
2006-04-20 14:06:58.141MaxDebug 10883:252998 PolicyAgent: get_request_url(): Host: server.edu
2006-04-20 14:06:58.142MaxDebug 10883:252998 PolicyAgent: get_request_url(): Port is 443.
2006-04-20 14:06:58.142 Debug 10883:252998 PolicyAgent: get_request_url(): Returning request URL https://server.edu:443/subdir/.
2006-04-20 14:06:58.142 Warning 10883:252998 PolicyAgent: get_method_num(): Apache request method number did not match method string. Setting method number to match method string GET.
2006-04-20 14:06:58.142 Debug 10883:252998 PolicyAgent: am_web_is_access_allowed(): url 'https://server.edu:443/subdir/' path_info '/'.
2006-04-20 14:06:58.142MaxDebug 10883:252998 PolicyAgent: am_web_is_access_allowed(): processing url https://server.edu:443/.
2006-04-20 14:06:58.142MaxDebug 10883:252998 PolicyAgent: FqdnHandler::isValidFqdnResource() Resource => https://server.edu:443/, is valid => true
2006-04-20 14:06:58.142 Debug 10883:252998 PolicyAgent: am_web_is_access_allowed(): client_ip xxx.xxx.xxx.xxx not found in client ip not enforced list
2006-04-20 14:06:58.142MaxDebug 10883:252998 AM_POLICY_SERVICE: am_policy_compare_urls(): compare usePatterns=true returned 3
2006-04-20 14:06:58.142MaxDebug 10883:252998 AM_POLICY_SERVICE: am_policy_compare_urls(): compare usePatterns=true returned 3
2006-04-20 14:06:58.143MaxDebug 10883:252998 AM_POLICY_SERVICE: am_policy_compare_urls(): compare usePatterns=true returned 3
2006-04-20 14:06:58.143MaxDebug 10883:252998 AM_POLICY_SERVICE: am_policy_compare_urls(): compare usePatterns=true returned 3
2006-04-20 14:06:58.143MaxDebug 10883:252998 AM_POLICY_SERVICE: am_policy_compare_urls(): compare usePatterns=true returned 3
2006-04-20 14:06:58.143 Debug 10883:252998 PolicyAgent: in_not_enforced_list: not enforced list is reversed, only matches will be enforced.
2006-04-20 14:06:58.143 Debug 10883:252998 PolicyAgent: in_not_enforced_list: allowing access to https://server.edu:443/
2006-04-20 14:06:58.143 Debug 10883:252998 PolicyAgent: am_web_get_parameter_value(): Param Name = iPlanetDirectoryPro, & Param Value = NULL, status not found
2006-04-20 14:06:58.143 Debug 10883:252998 PolicyAgent: am_web_is_access_allowed(): remote user set to unauthenticated user (null)
2006-04-20 14:06:58.143 Info 10883:252998 PolicyAgent: am_web_is_access_allowed()(https://server.edu:443/, GET) returning status: success.
2006-04-20 14:06:58.143 Info 10883:252998 PolicyAgent: process_request(): Access check for URL https://server.edu:443/subdir/ returned success.
2006-04-20 14:06:58.143 Debug 10883:252998 PolicyAgent: set_user(): user set to
2006-04-20 14:06:58.143 Debug 10883:252998 PolicyAgent: am_web_is_logout_url(https://server.edu:443/subdir/): normalized URL https://server.edu:443/subdir/.
2006-04-20 14:06:58.143 Debug 10883:252998 PolicyAgent: set_user_attributes(): set user attributes option set to none.
2006-04-20 14:06:58.144 Debug 10883:252998 PolicyAgent: process_access_success(): returned AM_WEB_RESULT_OK.
2006-04-20 14:06:58.144 Debug 10883:252998 PolicyAgent: process_request(): returning web result AM_WEB_RESULT_OK, data []
2006-04-20 14:06:58.144 Debug 10883:252998 PolicyAgent: am_web_process_request(): Rendering web result AM_WEB_RESULT_OK
2006-04-20 14:06:58.144 Debug 10883:252998 PolicyAgent: am_web_process_request(): render result function returned AM_SUCCESS.
2006-04-20 14:06:58.144MaxDebug 10883:252998 PolicyAgent: get_request_url(): Host: server.edu
2006-04-20 14:06:58.144MaxDebug 10883:252998 PolicyAgent: get_request_url(): Port is 443.
2006-04-20 14:06:58.144 Debug 10883:252998 PolicyAgent: get_request_url(): Returning request URL https://server.edu:443/subdir/index.html.
2006-04-20 14:06:58.144 Warning 10883:252998 PolicyAgent: get_method_num(): Apache request method number did not match method string. Setting method number to match method string GET.
2006-04-20 14:06:58.144 Debug 10883:252998 PolicyAgent: am_web_is_access_allowed(): url 'https://server.edu:443/subdir/index.html' path_info ''.
2006-04-20 14:06:58.145MaxDebug 10883:252998 PolicyAgent: am_web_is_access_allowed(): processing url https://server.edu:443/subdir/index.html.
2006-04-20 14:06:58.145MaxDebug 10883:252998 PolicyAgent: FqdnHandler::isValidFqdnResource() Resource => https://server.edu:443/subdir/index.html, is valid => true
2006-04-20 14:06:58.145 Debug 10883:252998 PolicyAgent: am_web_is_access_allowed(): client_ip xxx.xxx.xxx.xxx not found in client ip not enforced list
2006-04-20 14:06:58.145MaxDebug 10883:252998 AM_POLICY_SERVICE: am_policy_compare_urls(): compare usePatterns=true returned 3
2006-04-20 14:06:58.145MaxDebug 10883:252998 AM_POLICY_SERVICE: am_policy_compare_urls(): compare usePatterns=true returned 3
2006-04-20 14:06:58.145MaxDebug 10883:252998 AM_POLICY_SERVICE: am_policy_compare_urls(): compare usePatterns=true returned 4
2006-04-20 14:06:58.145 Debug 10883:252998 PolicyAgent: in_not_enforced_list(https://server.edu:443/subdir/index.html): matched 'https://server.edu:443/subdir/*' entry in not-enforced list
2006-04-20 14:06:58.145 Debug 10883:252998 PolicyAgent: in_not_enforced_list: not enforced list is reversed, only matches will be enforced.
2006-04-20 14:06:58.145 Debug 10883:252998 PolicyAgent: in_not_enforced_list: enforcing access control for https://server.edu:443/subdir/index.html
2006-04-20 14:06:58.146 Debug 10883:252998 PolicyAgent: am_web_get_parameter_value(): Param Name = iPlanetDirectoryPro, & Param Value = NULL, status not found
2006-04-20 14:06:58.146 Debug 10883:252998 PolicyAgent: am_web_is_access_allowed()(https://server.edu:443/subdir/index.html,GET): no sso token, setting status to invalid session.
2006-04-20 14:06:58.146 Debug 10883:252998 PolicyAgent: am_web_is_access_allowed(): Successfully logged to remote server for GET action by user unknown user to resource https://server.edu:443/subdir/index.html.
2006-04-20 14:06:58.146 Info 10883:252998 PolicyAgent: am_web_is_access_allowed()(https://server.edu:443/subdir/index.html, GET) returning status: invalid session.
2006-04-20 14:06:58.146 Info 10883:252998 PolicyAgent: process_request(): Access check for URL https://server.edu:443/subdir/index.html returned invalid session.
2006-04-20 14:06:58.146MaxDebug 10883:252998 PolicyAgent: am_web_get_url_to_redirect(): goto URL is https://server.edu:443/subdir/index.html
2006-04-20 14:06:58.146MaxDebug 10883:252998 PolicyAgent: find_active_login_server(): Trying server: https://access-manager-server.edu:443/amserver/UI/Login
2006-04-20 14:06:58.149 Debug 10883:252998 PolicyAgent: process_access_redirect(): get redirect url returned AM_SUCCESS, redirect url [https://access-manager-server.edu:443/amserver/UI/Login?goto=https%3A%2F%2Fserver.edu%3A443%2Fsubdir%2Findex.html].
2006-04-20 14:06:58.149 Debug 10883:252998 PolicyAgent: process_access_redirect(): returning web result AM_WEB_RESULT_REDIRECT.
2006-04-20 14:06:58.149 Debug 10883:252998 PolicyAgent: process_request(): returning web result AM_WEB_RESULT_REDIRECT, data [https://access-manager-server.edu:443/amserver/UI/Login?goto=https%3A%2F%2Fserver.edu%3A443%2Fsubdir%2Findex.html]
2006-04-20 14:06:58.149 Debug 10883:252998 PolicyAgent: am_web_process_request(): Rendering web result AM_WEB_RESULT_REDIRECT
2006-04-20 14:06:58.150 Debug 10883:252998 PolicyAgent: am_web_process_request(): render result function returned AM_SUCCESS. -
Terminal: Stored Remote Connection with non-standard Port?
Hi,
I am new to MacOS and I am amazed by the integrated terminal. However, I sometimes need to connect to servers which use a non-standard SSH port, for example, 2020. I know that I can manually connect, but for convinience, I'd like to have a saved remote connection including the non-standard port. Is this possible somehow?
Thanks,
FelicitusI did some experimentation, using Terminal.
Terminal -> New Remote Connection -> Service -> [+]
now enter your own new service which includes
/usr/bin/ssh -p 50022
I found I had to enter a bonjour entry to get it to accept my new service, but once I did, I was able to use that new service with the custom -p 50022 port value.
Your mileage may vary. I still prefer iTerm.
Oh yea. In the future, Terminal and Unix oriented questions are better asked in the Mac OS X Technologies > Unix Forum
<http://discussions.apple.com/forum.jspa?forumID=735> -
Is it possible to make a DVD with non-standard sized movies, w/o scaling?
I have some software tutorial material that I want to turn into a DVD. Since the video was created as a screen capture of a particular piece of software, the finished video is an odd size of 830 x 622 (I wanted to capture the screen dumps at their actual resolution, which looks crystal clear - and that was the size of the software's main window.) Note that this is still 4:3.
I edited the material in FCP 5, made a custom sequence setting of 830 x 622, and the exported final results are QT movies with a size of 830 x 622. We then flash-encoded these for web-broadcast at a size of 640x480.
What I am wondering is: now that we want to make a DVD, can a DVD be made that keeps this video at the larger size, so that it is crystal clear? So far, I experimented with using a few of the DVD format encoding options in Compressor, and it seems to end up as 640x480 no matter what I do.I think you might be mistaken about the 720x480. When I make a new sequence in FCP, it calls 720x480 3:2, not 4:3. If I set it 4:3 (which is one of the two allowed DVD standards), it becomes 640x480.
Indeed, I have been trying various export experiments from Final Cut with Compressor using presets such as "DBD Best Quality 120 minutes - 4:3", and they all come out as 640 x 480. Furthermore, I can import them into DVD Studio 4 and they seem to work normally for now.
So, dragging my 830x622 QT movies directly into compressor and applying the above preset results in very good-looking, 640x480 MPEG-2 video. I had hoped there was some way to keep the higher-resolution of 830x622, but apparently DVD only supports a few standard pixel dimensions (4:3 at 640x480, 16:9...) -
Transfer an internal table with non char data type to an application server
Here is a part of my code. lv_string variable was type string initially but i got an error Not mutually convertible in a Unicode Program. I changed it to type ty_afko. Now the program works but the data it puts out has just a bunch of #####. I cannot make all value in the internal table type char because then my select statement is giving errors.. Please help...
Type: BEGIN OF ty_afko,
rsnum LIKE afko-rsnum, " Number of reservation
aprio LIKE afko-aprio, " Order Priority
maufnr LIKE afko-maufnr, " Number of superior order
lead_aufnr LIKE afko-lead_aufnr, " Leading order in current processing
END OF ty_afko.
data: gt_afko TYPE STANDARD TABLE OF ty_afko INITIAL SIZE 0,
wa_afko TYPE ty_afko,
select rsnum aprio maufnr lead_aufnr
from afko into table gt_afko.
IF gv_error = 'X'.
EXIT.
ELSE.
<b>DATA: Lv_string type ty_afko.</b>
loop at gt_afko into wa_afko.
clear lv_string.
<b> move wa_afko to lv_string.</b>
perform f_transfer_dataset using gc_f_afko lv_string changing gv_error.
endloop.
endif.
FORM f_transfer_dataset USING p_file
p_data
CHANGING p_error TYPE c.
Data: lv_file(25) type c.
CONCATENATE gc_path p_file INTO lv_file.
TRANSFER p_data TO lv_file.
ENDFORM. "F_TRANSFER_DATASETThe key is to create another empty structure with fields of type c.
TYPES: BEGIN OF ty_resb,
bdter TYPE RESB-BDTER, " This field is type d
bdmng type resb-bdmng, " This field is type p with 3 decimals - total 14
END OF ty_resb,
BEGIN OF ty_resbstr, " This structure is the same as above but the field types will be char.
bdter(10),
bdmng(14),
END OF ty_resbstr.
DATA: gt_resb TYPE STANDARD TABLE OF ty_resb,
wa_resb TYPE ty_resb,
structure type ty_resbstr. " Empty fields with the same structure as the work area.
SELECT bdter bdmng FROM resb INTO corresponding fields of TABLE gt_resb.
open dataset pfile for output in text mode encoding default.
loop at gt_resb into wa_resb.
clear gv_string.
move-corresponding wa_resb to gv_string.
perform f_transfer_dataset using gc_f_resb gv_string.
endloop.
FORM f_transfer_dataset USING p_file p_data.
TRANSFER p_data TO lv_file.
ENDFORM. -
Vendor Evaluation With Non Standard Main and Sub Criteria
Hi Gurus
I have a requirement wherein I have to evaluate a vendor on non stanadard Main Criterias like
1. Productivity with sub criteria as Receipt / Excepected Yield, for which I have used Scoring method 2
2.Quality Standards with Sub Criteria,- Germination (%),Genitic Purity % , Field level flags, for which i have used scoring method 7 by activating user exit- MM06L001
3.Raw Seed to Clean Seed ratio, with the same sub criteria and with the above scoring method and user exit.
The weightages given to the above three are 40 , 35 and 25 respectively.
Can you please tell me how to calculate the values for subcriterias( for example for my main criteria 2. i want to assign the weightaghes for sub criterias - Germination - 50 , Genitic Purity %- 30, & Field level flags - 20, . along with smoothin factors.
I want to automise the whole process and run the evaluation in the background.
An early reply will be very helpful to me.
thanks and regards
Ashok Kumar PitlaT147 - Control table for vendor evaluation
T147A - Definition for main criteria
T147B - Text for main criteria
T147C - Definition for sub-criteria
T147D - Text for sub-criteria
T147E - Definition of weighting keys
T147F - Description of weighting keys
T147G - Main criteria
T147H - Interval for delivery time statistics
T147I - Definition of sub-criteria for the main criteria
T147J - Weighting keys
T147K - Assignment: Percentage X Score
T147L - Intervals for quantity reliability
T147M - Definition of scope of list
T147N - Text for scope of list
T147O - Scope of List
T027A - is the table for defining shipping instructions
T027C - specifies the points scores for compliance -
Embedded Windows Media PLayer With Non-Standard File Extension
I have embedded a windows media player in a asp.net web page, using the usual
<object> and <embed> tags. The video is served by an ashx (http handler). When I try to play the video, I usually (but not always) get an error message telling me that the file extension (ashx) does not match the file format.
This happens in IE (8, 9, 10, 11) and also in Firefox (latest) with the WMP plugin.
I know that the tags (with classid, etc) are correct because the media player displays and allows me to click the 'play' button.
The ashx returns the correct mime type (video/x-ms-wmv) and a valid file name (somevideo.wmv) in the response headers. I have tried content-disposition attachment and inline.
I have tried urls using 'http://', 'https://', and '//' (which I prefer)
If I put the url (including the .ashx) of the video file in the browser address bar directly, the video downloads and plays in the standalone media player.
If I modify the object tag to use a direct path to the video file (/somewhere/somevideo.wmv), it works - but I can't use this as a solution.
The same ashx serves up video and audio in various other formats with out any fuss - it just seems that the embedded windows media player doesn't like it.
This has been working for several years - I think this is some new behavior, though I can't identify what has changed, other than browser updates.
Any ideas on what could be causing this? Am I missing something simple?Hi,
Tools>Internet Options>Security tab, click "Reset all zones to default"
Advanced tab of Internet Options>uncheck "Do not save encrypted files to disk"
f12>Networking tab, click the Start button, navigate to your page and observer the response header and content.
To determine if you page is being rendered in a x64 host (all IE versions and WaterFox, type
navigator.platform in the IE Developer tools Console tab,
Post questions about html, css and scripting for website development using MSIE browsers to the IE Web Development forum... WITH a link to your website.
Rob^_^ -
Problem with non loading movie clips in CS3
Hi.
I am making an animation ( Trailer for an upcoming handheld
game i am working on ).
And i have encountered a problem when i play back the
animation with Flash player.
There is two movie clips in the animation ( Normal vector
drawing but with effects applied on it ( color adjustment , and
blur ) ) and when i play the published swf back with flash player
the two movie clips are in their normal Vector mode ( without the
filters ) until the middle of the animation when they finally
"load" , the filters finally have an effect on the two vector
drawings.
i use a very high end computer so that couldn't be it.
And when i am going to upload the flash film there's going to
be a loading screen ... i have no clue if it's going to fix this.
But for now this is really odd and looks really awkward.
If this problem persist i will not make the deadline. please
help fast.
Thanks everybody.
-Jimmy Gonzo
EDIT: oh and i also noticed that when the stuff isn't loaded
yet... the animation goes too fast.It seems to me that you need to put a preloader in the first
frame of your whole .fla. It seems that all your assets are not
being loaded before the .swf playhead moves forward.
A simple preloader could be something like:
frame 1 label this as "preloader"
frame 2 (insert the following commands)
if (this._framesloaded >= this._totalframes) {
this.gotoAndPlay("init");
}else{
this.gotoAndPlay("preloader");
}
Maybe you are looking for
-
How do I increase the length in data file
I have been getting this error, can anyone tell me why I'm getting the error below and help me fix the the error( increase the length of data file. This is my Control file LOAD DATA INFILE Job.dat APPEND INTO TABLE job FIELDS TERMINATED BY x'09' (Pos
-
I am not able to connect to the apps server
I get an error code 1 when I attempt to log into the apps section from my printer. I talked to tech support and we checked everything. All is good except for getting into the apps section.
-
Do I need to override enum's hashCode() and equals()?
Hi all: I have a enum type let's say it is public enum Type ONE, TWO; }If I want to compare the enum value to see if they are same value or not, let's say I have two: Type a = Type.ONE; Type b = Type.TWO;should I use a.equals(b) or (a == b) If I
-
no puedo compral en la tienda de itune no me acuerdo de mis contestaciones de seguridad y llevo 3 dias tratando y verdaderamente estoy molesto me compre una macbook pro y me gusta mucho pero si no pueda hacer cosas pues voy a tener que devorverla a ;
-
Lacie hd seems stuck while encrpting
8 hrs running an encryption of 900+ mg.. whats up can i correctly assume it is stuck what do i do how does one check on it being stuck