Repeating video in different clips

Hi again Forum!
Could you help, please? I have 12-minute long video files shot with Sony EX1. The clips have the same name but different number, for example: 4806_01, 4806_02, 4806_03 and so on. In the source video these files are different and follow one after the other (the camcorder makes an automatic "cut"between them and then continues shooting with the next number for the same clip name). But when I place the three clips that are supposed to correspong to the three videos onto the Timeline, these three clips show the same footage (the one from the clip #1). Sometimes Premiere also adds extra clips where the files are combined into one clip - and repeats that longer clip, too!
Has anyone encountered that problem before?
Please take a look at the attached screenshot:

Dimitri, check your other thread. In there I offered what I know about the EX cameras. These clips are the result of the camera segmenting the files into 4GB clips. The numbers after the underscore are the sequence in which the files were split. I think you need use the Sony XD Cam EX Clip Browser to place these files on your hard drive in a manner that PP will interpret them as segments of the same clip. If you just drag them into the timeline or even import them without the use of the Clip Browser software, I think the metadata for each segment will keep referring back to the first file in the split sequence.

Similar Messages

  • Cutting up a video into different events using iMovie

    I have just imported a large homemade video into iMovie which is just one file but contains footage taken from various holidays I have been on. Is there a way to separate the video into different events under the Event Library? I seem to be having trouble working out how to do it.

    It is possible in the event library, but I would suggest that you do it in an app called MPEG Streamclip. It will be much faster and easier to do it using MPEG Streamclip.
    Download MPEG Streamclip here.
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    Drag your large file into MPEG Streamclip.
    Now, set your playhead to the beginning of the first event, and type i for in point. move the playhead to the end of this clips, and type o for out point. Then, use FILE/EXPORT TO QUICKTIME. Choose Apple Intermediate Codec as your codec. (Note: if your original clips are in DV, you may wish to stick with DV. Otherwise use Apple Intermediate Codec, and don't change any of the settings. Give it a name and location. You can import this into an iMovie Event using FILE/IMPORT MOVIE in iMovie.
    Repeat this until you have all the clips you need.

  • Different zoom levels for different clips in the same project?

    Hi
    I am making a movie with videos from two different cameras. As a result some of the clips are cut down in size to a small portion of the screen. This can be solved if it is possible to use different zoom levels for different clips in the same project. I have not been able to do this. Is it possible?
    kind regards
    Soren

    You can scale the small clips up to the same size of the larger one... but you will get a quality loss.
    Using Motion or Scale to Frame Size commands
    Better to scale the large ones down to a Sequence that matches the smaller clip dimensions.

  • Having a problem when scrolling through one clip: a different clip scrolls through point and time simultaneously. Can you please assist us?

    Having a problem when scrolling through one clip: a different clip scrolls through point and time simultaneously. Can you please assist us?

    First question: this is a Captivate forum, are you sure that you have a Captivate problem (with cpvc or an imported video)?

  • How do you combine videos from different cameras

    Hi there,
    I would like to be able to combine video clips taken of the same event with different cameras in such a way that they all share the same audio.
    I have recorded my daughter's entire theater play with a camera in the back of the hall connected directly to the theater's audio equipment. Thus, I have the entire audio in high quality in one huge clip. Then I and a couple of other parents have recorded the play with a number of additional cameras. I would now like to put together a project with video clips from the other cameras using the audio of the first. Obviously, the timing is critical here.
    How can I replace part of just the video of a clip with the video of another clip without affecting the audio and making sure that the part that I replace is of the exact same length as the part I insert? How can I then finetune the location of the replacing part so that it fits to the audio?
    Thank you very much for any help you can provide.
    Best regards,
    Marcus

    Hi AppleMan,
    this is also a very helpful hint, thanks!
    This has been quite an experience and wasn't as easy as I had hoped. May I add two additional hints in the hopes that someone else will find them useful:
    * When taping an event with several cameras make sure that all cameras are set to the same time. This makes iMovie sort them in roughly the right order and makes it much easier to find the clips you want.
    * When trying to overlay one short clip over another longer one (using the audio of the longer clip) it is helpful to have several extra frames on the left and right of the clip. With the "Trim" menu item one can then more precisely determine exactly which part of the clip to insert. With the Shift-Arrow Keys one can then easily shift the entire clip by individual frames without changing the length of the clip.
    Best regards,
    Marcus

  • How can i detach the video from a clip so i can only use the audio when using imovie?

    how can i detach the video from a clip so i can only use the audio when using imovie?

    First, go to iMovie/Preferences and enable the Advanced Tools.
    Import the video clip into an iMovie Event. When you get ready to use it in an iMovie Project, select the clip in the Event and drag & drop it on top of a video or photo clip in the project at the place where you want it to begin. When the pop-up menu appears, choose Audio Only.

  • Placing two different clips in the same frame

    I am wondering if it is possible in FCP to do this...
    Basically I am trying to achieve the split screen effect in some movies during the credits, where outtakes or deleted scenes are still rolling on one half of the screen and the credits continue on the other half with a black background.
    I searched in the forum but couldn't find any relevant topics. Perhaps I am just not thinking of the right words.
    Any ideas, suggestions?
    Thanks!

    The fastest way I can advice is...
    1. edit your credits sequence (the clips you want to keep going as your credits roll)
    2. nest the clips in a new sequence then you have a timeline with a nested sequence in your track 1...
    3. Select your nested sequence in the track 1 and use the motion tab to scale/rotate/crop/move your image wherever you want in the canvas...
    3. create a second track for your rolling credits...
    4. create your rolling credits
    5. if you have different clips for your rolling credits you may want to nest these too...
    6. select your rolling credits and use the motion tab again to scale/crop/rotate/move your credits wherever you want in the canvas
    Hope this help...

  • Video audio enabled clips not moving together

    I am dragging clips on to the timeline. They have audio and video. the dialogue box says they are enabled. However, If I move the clip, audio and video  are not moving together when I drag either the video or audio clip in the timeline. Even when I disable the clip, link them or group the audio and video, they do not move together

    Link them - select the video and audio tracks and press ⌘L.
    Patrick

  • Adding video in different quality into iTunes library

    I have the problem with importing my video in different quality (for iPhone 3GS, Full HD and so on) into my iTunes Library.
    Before upgrade of my mac pro 1.1 to Lion 10.7.5. from Snow Leo I was able to drag the whole folder with video files in different quality onto the Itunes windows and iTunes added all formats (M4V with different quality) and assigned it with single movie. Now Itunes addes only one file to its library. So I have to choose in which quality to add file, because it is impossible to add the same file in other quality. It is possible to back this feature back in present configuration?
    Lion 10.7.5 (it is impossible to upgrade to Mountain Lion)
    iTunes 11.0.2
    Thanks in advance,
    Alexander

    some kind of solution: to copy all files to the iTunes Media Folder and to drag and drop them from there pressing OPTION (do not copy - only link)

  • Why the FCP 7 is show the different clip view which is not there?

    I am using FCP7 for about 5 years now but never faced this type problem before. I am using footage from 3 different cameras as usual. When I view the clip or export the files it shows the different clips which are not there. Could anyone help me to solve the issue please. I already trashed the FCP preferences.
    Thanks in advance.

    This sometime occurs when you are using source that is not friendly to FCP-7, such as material that is in the H.264 or other mpg format.
    Is your source material all converted to an edit friendly format?
    MtD

  • Inserting video between two clips

    Hi does anyone know how to insert video between two clips without erasing some of the two clips. I want to insert and have the other clips just make room for the new clip, extending the timeline the necessary amount. I thought you could just drag it in but it keeps erasing the existing footage in the timeline. Any advise would be awesome

    Make sure the playhead is parked between two clips, and drag the clip from the browser/viewer to the canvas, dropping it on the "insert" box in the edit overlay. Or you could drag the clip from the viewer/browser to the timeline but make sure the arrow that appears is facing to the right, not down.

  • Does anyone know why video image in events section has a certain dimension and instead when I import same video in a clip, the size of video image is minor? Thanks for help

    Does anyone know why video image in events section has a certain dimension and instead when I import same video in a clip, the size of video image is minor? Thanks for help

    This may depend on your chosen encoding options for the Mails (MIME vs. Base64 or similar) and/or the mails being reduced in size and sliced up server side. Apple (and Google) do stuff like recompressing images when viewing mails on mobile devices from an Apple ID or Gmail account... You have to turn it off in their web frontends....
    Mylenium

  • How can I deliver HD Video in different bitrate based on enduser's bandwidth

    Hi,
    I am new to Flash Media Server. I want to deliver HD Video  in different bitrate based on enduser's bandwidth.Also enduser should able to change the bit rate like 200p, 700p, 1500p.
    How can i achieve this.
    Thanks in advance.

    Check this link: it should help you: - http://www.adobe.com/devnet/flashmediaserver/articles/beginner_dynstream_fms.html(related links at end of this article)
    Also watch this video : http://fmsguru.com/showtutorial.cfm?tutorialID=40

  • Flash Builder embed video in different stages

    Hi, I'm Paulinho Cé from Brasil and i have a problem to embed youtube videos on my site in different stages FlashBuilder.
    I have 10 videos and want to display them in the event of each button corresponding to a different stage.
    This code works in the main application but not in the stages of the site, because the functions and variables are global and can not change the url of the video to a video display differently at each stage.
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
    layout="absolute" verticalAlign="top"
    creationComplete="Init();" >
    <mx:Script>
    <![CDATA[
    private function Init():void
    var url:String = "http://www.youtube.com/v/zlfKdbWwruY&hl=en&fs=1"; //url extracted from embed code
    Security.allowDomain(url); //allow domain
    youtubevid.load(url); //load video
    ]]>
    </mx:Script>
    <mx:VBox width="100%" height="100%" horizontalAlign="center" verticalAlign="top" verticalGap="0">
    <mx:Label text="YouTube Video Embedded Inside Flex" width="100%"  color="#060809" textAlign="center" fontSize="16" fontWeight="bold"/>
    <mx:SWFLoader id="youtubevid" verticalAlign="top" horizontalAlign="center"  width="425" height="344"/>
    </mx:VBox>
    </mx:Application>
    <iframe title="YouTube video player" width="480" height="390" src="http://www.youtube.com/embed/kdhuQJRW6kA" frameborder="0" allowfullscreen></iframe>
    Because this solution is of extreme importance to me, I requestthe help of experts, which immensely grateful.
    Thanks for all,
    Congrat's
    Paulinho Cé

    This appears to be Flex question. Please try posting this to the Flex forums here http://forums.adobe.com/community/flex/flex_general_discussion for better response.

  • FR: Keep Video and Audio clips Linked in Multicam once razored

    Here is my feature request, if you agree please cut and paste and submit to feature request!
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
    *******Enhancement / FMR*********
    Brief title for your desired feature:
    Keep Video and Audio cuts in a Multicam sequence linked together when using the razor tool.
    How would you like the feature to work?
    Whether inside a multicam created sequence, or a multicam sequence that has been pasted into another layer on a separate sequence, I want the video and audio to remain linked together when a cut is made. Currently, when I make a cut, the audio and video become unlinked and I have to first a. make all the razor cuts, then b. go and relink the video and audio clips back together. Takes an extra 30 minutes every time now.
    Why is this feature important to you?
    To save time and stop the long redundant process of click selecting the video and audio and linking them, over and over and over, in a multicam sequence. Obviously if I can do it manually, it can also be done in-program.

    When you create the multicam sequence manually (still the best way, I think), video and audio remain linked.

Maybe you are looking for