Replacement fone signal reception is no where near as good as my first 3gs

I received a replacement handset through insurance as my previous phone got water damaged.
After using it for a day, its clear that the signal reception is very poor. I cannot get a signal in my living room where I normally could, no problem.
Upstairs is quite iffy also. Is there anything I can do to improve it?
Regards
James

You could try a restore.
I would ask for a replacement iPhone.
Phil

Similar Messages

  • How can I boost ipad3's antenna signal reception?

    My Wifi router name don't appear in wifi networks list when I'm in the bedroom, where as all other devises like laptop, Blackberry can see the wifi router signal very well. If I keep my ipad3 very near to the wifi router it works well.
    The distance between wifi router and bedroom is not even 10 meters
    How can I boost ipad's antenna signal reception to see my wifi router?
    I already reset network settings and toggles airplane mode. Upgraded ios to the lastest version.

    There's no hardware solution.
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • N8 poor signal reception and other hardware issues...

    I have always been a Nokia fan . I started with Nokia 6600, then N70, then N82 and now a Nokia N8.
    However, I am facing the worst experience with N8 reception issues.
    The problems faced are as under :
    1) Poor Signal Reception Issues - Signal strength is weak and is constantly fluctuating compared to other Nokia Phones. At my workplace, if Nokia N82 displays 5 bars, N8 would display only 1 or 2 bars.
    2) Phone freezes many times. Whenever an Alarm is enabled, phone freezed much more.
    3) Purple Tint in the display. Nokia Service Centre says that its normal but according to me, they are just ignoring this issue. 
    4) Vibration is weak : I often do not realize when the phone is vibrating in my pocket !! 
    Upcoming Symbian Anna will just improve the user interface but will not be able to solve these hardware issues.
    If Nokia plans a hardware update facility for N8 users wherein they can fix the signal reception issues and increase the RAM to 1 GB atleast, I would retain this phone for few years.  
    But, now, I intend to switch to Samsung Galaxy S II. 
    Your views solicited.
    Regards
    MODERATOR'S NOTE: This post has been edited as we do not allow the discussion of speculations concerning products or services which have not been officially announced by Nokia.

    sats_24 wrote:
    I have always been a Nokia fan . I started with Nokia 6600, then N70, then N82 and now a Nokia N8.
    However, I am facing the worst experience with N8 reception issues.
    The problems faced are as under :
    1) Poor Signal Reception Issues - Signal strength is weak and is constantly fluctuating compared to other Nokia Phones. At my workplace, if Nokia N82 displays 5 bars, N8 would display only 1 or 2 bars.
    2) Phone freezes many times. Whenever an Alarm is enabled, phone freezed much more.
    3) Purple Tint in the display. Nokia Service Centre says that its normal but according to me, they are just ignoring this issue. 
    4) Vibration is weak : I often do not realize when the phone is vibrating in my pocket !! 
    Upcoming Symbian Anna will just improve the user interface but will not be able to solve these hardware issues.
    If Nokia plans a hardware update facility for N8 users wherein they can fix the signal reception issues and increase the RAM to 1 GB atleast, I would retain this phone for few years.  
    But, now, I intend to switch to Samsung Galaxy S II. 
    Your views solicited.
    Regards
    MODERATOR'S NOTE: This post has been edited as we do not allow the discussion of speculations concerning products or services which have not been officially announced by Nokia.
    I am agree with poor signal issue with nokia N8. I have two cell with one is N8 and other one is N26 with nearly 4.5 year old but at same place Nokia N8 showing very poor quality of network signal compared to N26. So for same network provider with two different cell with same manufacture how can drastic different that is also investing nearly RS.22000!
    Please resolve the issue ASAP.
    Regards,
    Praful

  • My iphone 5 has a bad signal reception LTE turned off any suggestions

    I purchased my Iphone 5 last November 2012 by Cosmote Greek network provider.
    I am using an iphone 3GS as well and I can compare the strength of the signal reception all time.
    Usually the 3GS has 3 signal bars more than the Iphone 5 which many times goes with no signal. The LTE is turned off as well any suggestions?
    Thanks

    I'd just like to say that ahs70's post on Dec 1, 2013 at 1:17am on Pg. 9 worked for me as well: https://discussions.apple.com/thread/5338609?start=120&tstart=0
    If your iPhone's battery is acting up you need to determine if it's a software issue or a hardware/battery issue.  To do that, after syncing your iPhone, erase/hard reset all data and settings from your iPhone to what it was from the factory as new.  This can be found in Settings/General/Reset/Erase All Content and Settings.  Then test it out for a day or two.  If it's still acting up then it's likely a hardware issue and you will need to get your battery replaced.  If your warranty is done than check out this link to get a battery kit to replace your iPhone battery yourself:  http://www.ifixit.com/Store/iPhone/iPhone-5-Replacement-Battery/IF118-001#produc tDescription
    If your iPhone is now working properly after hard resetting it than it's most likely a software issue.  This battery issue only started after upgrading to the new iOs7, so it is obviously related to the update not properly installing itself.  What has worked for me and many others is to manually update to iOS 7.0.4 using the full downloaded version of the update which is about 1.32 Gigs.
    But first you need to find out what model of iPhone you have, click here to determine if it's GSM or CDMA: http://support.apple.com/kb/HT3939?viewlocale=en_US&locale=en_US
    Then go here and scroll down to download the iOS 7.0.4 complete update for your device:  http://www.downloadios7.org/download-ios-7-0-4-ipsw-file.html
    Then scroll up on the download page and follow the instructions of updating your iPhone manually following the instructions below:  "IPSW with iTunes"
    And your done.
    Problem solved.
    I only posted this because it was a very frustrating problem that no one really seemed to figure out a solution for.
    I hope this helps.
    Emile Beaulieu

  • N97 weak signal reception

    I have the NAM N97 for 3 weeks now and I am having a weak signal reception on some places that I never had this problem before when I was using the 5800 !! yesterday at was at starbucks in broadway and the people around me where using their phones for calling and messaging while my N97 showed the messgae ' NO Signal' when I finished my cofee and about to leave the place the phone showed a weak signal ( one bar ) when I reached the main enterance and when i went out the signal returned to normal !! today at the hospital 1st floor at showe 1 bar only and sometimes tha signal went off completely !! I checked my brothers E71 and it had 3 Bars !!
    Does anybody have the smae problem (Weak Signal) ? do I have to send it for repair ? at home and in open areas the phone shows full signal or at least 3 Bars !

    I am afraid it is a phone issue, look a this: /discussions/board/message?board.id=smartphones&thread.id=144913 

  • My ipad is showing 7gb of storage being used on photos but there's no where near that many pictures! How do i get it to show the correct amount of storage available?

    My ipad is showing 7gb of storage being used on photos but there's no where near that many. I turned off photo stream but nothing has changed yet. How do i get it to display the correct internal usage now that photo stream is off? I also thought that icloud used another form of storage outside of the internal storage for photos, so im not exactly sure why the photos were ever in my internal storage to begin with. Does anyone know how that happens, or how to correct this problem? Im also trying to sync my ipad with my computer hoping that'll help, but nothing so far, its just taking a long time to back up.

    If you are syncing now, that may correct the incorrect storage reading - assuming that it is incorrect.
    You can also try something like this. While the iPad is still connected to iTunes - but after you sync - go into the Photos Tab in iTunes and toggle setting for Sync Photos From. Uncheck the setting and then check it again. See if that affects the capacity bar to show the correct storage amount.

  • Iphone 3gs no longer will work  after iOs5 update,comes up with message ' there is no sim card installed in the phone. Can anyone help me please. I am working as a volunteer in a remote location in Asia and no where near an Apple shop etc?

    I have tried to  update my 3GS phone and now it longer works as it comes up with message there is no sim card installed in the phone. Can anyone help please as I am no where near technical support as I am working as volunteer in remote Asian country

    Hi Allan,
    Thanks for asking, I knew I had forgotten to mention something. The phone was indeed unofficially unlocked, since there were no apple stores or even premium resellers in the region I lived in during the given procedure had to be done.
    I understand this could be a further complication, especially the fact the home button does not work. However, I was wondering if there would be a possibility to use a third-party application instead of iTunes to restore the iPhone? IF someone does know of such an application, I could easily solve further problems myself. Basically, the main issue here is my lack of ability to enter DFU mode.

  • I just dumped thousands of emails from my icloud storage, but I'm still not getting new emails....I'm no where near full at this point....how do I get my email back

    I just dumped thousands of emails from my icloud storage, as it was full.  That was about 35 hours ago, I'm still not getting emails.  I'm no where near full now....how long before I will get emails again?

    Does anyone have an answer to this problem? It's been 4 or 5 days now and iCloud still says I have 0kb of 5GB available, and 6.1GB of mail on iCloud. I guess that's better than yesterday when it said I had 8.3GB of mail. Does anyone know if it simply takes Apple a week to actually empty a mailbox?
    thanks in advance, hopefully tomorrow it says I have only 4GB of non-existent mail and I can start using it again...

  • HELP I have lost all my motion 4 content from all the files, ive looked in all the files and they are all empty. can i get replacement content as I my dvds where stolen along. with my other laptop.

    HELP I have lost all my motion 4 content from all the files, ive looked in all the files and they are all empty. can i get replacement content as I my dvds where stolen along. with my other laptop. any Ideas. would be a great help. For Motion 4.

    Try a hard reset:- hold the home button AND the power switch - ignore the red "Slide to power off" and wait ubntil the iPhone powers down, and then restarts - at the Apple logo, release all the buttons and see if your contacts reappear.

  • After i replaced hard drive my bluetooth disappeared where can I find it?

    After i replaced hard drive my bluetooth disappeared where can I find it?

                If you are talking about the bluetooth software (to connect devices) then you can download it here!

  • Quality of photos on burned DVD no where near original files

    The quality of the photos in a slideshow I burned to DVD using iDVD 6.0 are NO WHERE near the quality of the un-edited original files. It's so bad I wouldn't even give the DVD to someone.
    What gives? I chose "High Quality" encoding in iDVD.
    I was expecting the photos to be burned as-is and to be viewable at the full, high level resolution.
    Am I missing a setting?
    Thanks!

    What gives? I chose "High Quality" encoding in iDVD.
    Use Best Performance instead. (Provided Playback is under 60 mins.) This will help slightly.
    But overall you must keep in mind that DVD's are considered low resoltion devices. Often the still image quality is less than one third of a megapixel. And there's only so much you can do with this until we see Blue Ray Burners widely used on most macs.
    Also, in the meantime you may want to check out a few 3rd party apps that specialize in slideshow production:
    http://lqgraphics.com/phototomovie.php
    http://www.boinx.com/fotomagico/overview/

  • 68 gbs of app's on the HDD but there is no where near that amount as the mac book air is only a week old

    Hi - I recently migrated to Mac from a PC (about a week ago) and I noticed today that the HDD is nearly full already. There is no where near this amount of data on the HDD and I am confused as to what the Time machine is doing for me. I have two seperate external HD, one for my picture and the other for backing up the full system which I would normally have done twice monthly on my PC. I did notice that the Photos was huge so I migrated to the second EHD but all this seemed to do was allocate this space to applications as the amount of free space on the Mac didn't change at all.
    Can anyone please help me to understand why this is happening in the first place and secondly how I can in the future keep a better control on the free space I have?
    Many thanks for any assistance

    This is the screen shot of the HDD Storage

  • Bluetooth speaker is no where near maximum volume, although iPod's is.

    Bluetooth speaker is no where near maximum volume, although iPod's is.

    Hey Bean,
    A few things you may want to know/try...............
    1.The iPod's capacity is 27.80GB(Mac) & 27.69 (PC). The 2.5 Gigs missing are for the iPod's OS.
    2.Album art is included in the iD3 tags attached to each track. However, when you add album art, it does make the track a fraction bigger (but you won't see the increase). Unless you are using RAW photos which are HUGE/___sbsstatic___/migration-images/migration-img-not-avail.png/___sbsstatic_ __/migration-images/migration-img-not-avail.png
    3.As WinDoze doesn't see the iPod nativley, it opens it like a generic USB device. It knows it's an iPod because you have iTunes installed. because of this you may find that there are hidden files on your iPod (usually drivers for other USB devices). These can just be deleted by showing hidden files.
    4.If that is not the case, Restore the iPod using the 'iPod Updater' (latest version free on Apple.com/support/ipod). This will wipe the iPod and re-write the iPod's OSwith the updated software.
    Once you've done that put the iPod into manual update and transfer the songs (you can put it back to auto-update afterwards).
    5.If you sync your photos to the iPod, you can have the full file coppied over, uncheck this as they take up a lot more space than the thumbnails.
    hope they help?
    iMac (G3/4/5/Intel), iBook G3, Quad 2.5, 2 quad 650's   Mac OS X (10.4.6)  

  • BT Wifi with FON signal lost

    Hi all, forgive me if this has already been answered.  I have a BT home hub 3 and am opted in with bt wifi with fon. It has been working fine since I started, however the last few days, the signal has just disappeared from my home.  I don't always have the modem on, and sometimes if I want to quickly search for something online on my phone, I would just get connected to wifi with fon straight away, however the last few days this no longer works.
    If I have the modem on, wifi with fon shows up and I can connect. It's just when I turn it off, so too does the fon which is both strange and annoying as it has never done that before. I have tried a hard reset on the hub, reinstalled the wifi app and have also opted out and opted straight back in. I am aware that apparantely it takes a couple of days to 'reactivate', yet also noticed some people saying they had waited months and still nothing.
    I also noticed when I first went to opt out, it showed 0 zero, but when I opted in, it then showed "unlimited". However when I left and checked the status again, it then showed 0 again [which I have no idea what that is]
    Any help would be greatly appreciated.
    Solved!
    Go to Solution.

    Presumably when you mention the modem you are referring to the Homehub. If that is the case you should just leave the Homehub switched on 24/7 for best results.
    You must have your Homehub turned on for the BTWifi - Fon signal to be transmitted. If you have been able to connect to BTWifi-Fon with your Homehub turned off you have probably been connecting to a neighbours BTWifi signal. It may be that the neighbour's Homehub is now no longer transmitting for any number of reasons hence the reason you can not now see it.
    If you are at home do you have a particular reason why you use the BTWifi-Fon network and not your own wireless network that is broadcast from your Homehub.

  • HT1446 I need to order a replacement battery for Model A1185.  Where can I get it?

    I need to order a replacement battery for Model A1185. Where can I get one?

    You can get a new third party battery fairly cheap on eBay. Every MacBook from 2006 through Mid 2009 except the Late 2008 Aluminum Unibody and the Late 2009 and 2010 White Unibodies use the same A1185 battery.
    Black Batteries http://shop.ebay.com/i.html?_nkw=macbook+black+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+white+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
    White Batteries http://shop.ebay.com/i.html?_nkw=macbook+white+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+black+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
    Or for $129 from The Apple Store  http://store.apple.com/us/product/MA566LL/A?mco=MTY3ODQ5OTY
    I've bought used MacBooks off of eBay for my family, nine of them so far over the last 6 years. I've bought 8 batteries off of eBay sellers, just going with the cheapest. Only had one with a problem, it gave out after 6 cycles. That one was replaced under the warranty by the seller. The only other batteries that have been a problem were Apple branded batteries that started bulging. I've had two of those happen.

Maybe you are looking for

  • Essbase performance issue

    Hi all, We encounter a Essbase perfromance issue that we don't know the root cause. We have configured a server to run Essbase with 8 core CPU and 16GB RAM. We found that the Essbase calculation can use up to 80% CPU and about 8GB RAM only. I also ch

  • Strange behavior with System.out.println

    I was working with the following code: 1. public class DemoChar { 2. public static void main(String args[]) { 3. 4. char buf[] = new char[50]; 5. buf[0] = 'a'; 6. buf[1] = 'b'; 7. buf[2] = 'c'; 8. buf[3] = 'd'; 9. buf[4] = 'e'; 10. System.out.println

  • J2sdk1.5.0 Error

    Please help me out. I wanted my Jdeveloper 10g to migrate from j2sdk1.4.0_04 to J2sdk1.5.0. I changed the path by going to Tools->Project Properties->Libraries and edited the J2Se version It has done that successfully now while I am running my previo

  • Search inside contact "note"

    I always put some important contact information in the "note" field in contacts like "hobbie: Surfing" or "I know him from: Trip to Baja" so when I want to search for all my surfer friends or anyone is easy. But I tried the search in Z10 and it doesn

  • Every time i go on net or refresh "eval test" comes up what is it and how do i get read of it?

    "eval test" comes up every time i refresh or go on the net and have to click serveal times on the ok for it to let me on the page i want go or i m on