Replicate Sales Order from R/3 to CRM

Dear SAP CRM Gurus,
I want to replicate the sales orders created in R/3 to CRM . These order flow to R/3 from legacy system.
Please provide me the middleware steps need to be done for this. Also provide me other criteria required for replication to CRM,
like same number range , order type etc.
Thanks and Kind Regards
Tom

Hi Tom,
Check the [Best practice guide C03|http://help.sap.com/bp_crm70/BBLibrary/Documentation/C03_BB_ConfigGuide_EN_DE.doc] for the details.
Hope this will help.
Thanks,
Vikash.

Similar Messages

  • Replicate sales orders from  ecc to crm

    Hi experts,
                        We are creating sales orders in ECC and want to replicate them into CRM. Can you please tell me the configuration steps required in the middleware to replicate the orders from ecc to crm.
    thanks in advance
    Andy

    Hi,
    To replicate ECC Sales Order to CRM Sales Order, you need to setup up the Data Exchange in both the systems. This means you have to configure the systems, then you need to do an initial data exchanges and then finally the delta exchange will happen in both the systems. You need to look at the configuration guides for a proper setup of the systems.
    You can search the forum for a detailed document with special focus on the integration points.
    Also have a look at the following SAP HELP link:
    http://help.sap.com/saphelp_sm40/helpdata/EN/3f/40623c046a9b67e10000000a11402f/frameset.htm
    Hope this helps.
    Thanks,
    Samantak.

  • Error when replicate sales order from crm to r3

    Hello Guys,
    When I replicate a sales orders from a CRM system to R3 system the system does the following error in the smw01:
    queue name: R3AD_SAL_ERR
    error1:
    Please enter sold-to party or ship-to party
    Nº mensagem VP112
    error2:
    Sales document XXXX was not changed
    Nº mensagem V4219
    Any idea, why this happens?
    Mary

    Hello guys,
    I have solved my problem by my own.
    The problem was in the distribution of partner functions from crm to R3 (spro -> CRM->Basic Functions-> Partner processing->Data Transfer-> distribution of partner functions from crm to R3).
    The partner functions assigned to sales orders in R3 was the AG, WE, RE and RG, and in the CRM was SP, SH, BP, PY, the partner functions map wasn't correct
    I have had to map the correct partner functions between crm and r3. I have put in CRM the same partners functions that R3.
    Best regards
    Mary

  • Customer fields replication in Sales order from R/3 to CRM

    Hi all,
    I want to replicate, for Sales orders, one field (ZFIELD_A) on item level (VBAP) from R/3 to CRM .
    I used transaction EEWB on CRM with the option "Adding new fields to Business transactions" and I flagged checkbox "Also used in R/3".
    All worked fine and all the repository objects where created both in CRM and R/3, and the fileds was appended in structure CUSTOMER_I (CRM).
    The problem is when I replicate the data, because of existing customer fields  in R/3.
    In R/3 I have exisiting fields on BAPE_VBAP
    ZFIELD_1  [CHAR1]  - existing
    ZFIELD_2  (CHAR1] - existing
    ZFIELD_A  [CHAR30] (the new one)
    Assuming the above field values are X-Y-thisisatest
    the value of ZFIELD_A in CRM will be "XYthisisatest", since R/3 sends, in structure BAPIPAREX all the three Customer fields.
    In the generated (from EEWB) method ZEEW_DATAEXCHANGE01->CRM_DATAEXCH_R3D_MBDOC_FILL, called when transferring the order to CRM , all the first 30 positions are moved to ZFIELD_A from CRM.
    A solution would be to change the generated coding of the above method, by truncating the first 2 chars, but it's not so nice (and I also could loose the changes after a generation of the EEWB project).
    Anyone has a nicer idea?
    thanks a lot,
    Fabrizio

    Hi
    Go through the following NOTEs
    736595,833585,863611,873771.
    Regards
    Nadh.

  • Get Sales Orders from R/3 to CRM

    Hi,
    I want to get a list of the latest 3 sales orders which were placed for a Business partner.
    The Sales orders are being created in R/3 and i want to be able to get this data into the CRM system.
    The CRM middleware is not configured to sync R/3 to CRM.
    How can i do this?
    Regards
    Shivani

    Hi Shivani,
    I am not sure whether I understood your question or not. But if you want to use standard MW to exchange the data then you need to do the following.
    I am assuming your R/3 and CRM are connected to each other ( check the same using tr. SM50 and test the connection from one system to other system)
    1> check the queues R3A* & CSA* are registered in transaction SMQR
    2> check the tr. SMQS for your destination system.
    3> check for the site R/3 - OLTP and check for the subscription ALL BUSINESS TRANSACTION (MESG) Subscripition. - > this is for data transfer from CRM to R/3.
    4> define the no. range for transactions and transaction types etc.
    then you can load the object SALESDOCUMENT using the transaction R3AS - put some filter for this adaptor object so that it will bring only those transaction which you want to.
    Reffer to the Best practice guide for further details. you can get this in site help.sap.com.
    Hope this will help.
    Thanks,
    Vikash.

  • Replication of BP and Sales order from CRM to R/3

    Hello everyone,
    I have a peculiar condition in my hands.The requirement is to replicate 10 business partners from crm to R/3 ,then the next 4 Business partners need not be replicated and then the next three replicated..How do we do this kind of replication....
    One thing more regarding the replication of sales order.When we save a sales order in CRM,is it automatically replicated to R/3 or do we need to release it manually??
    If yes,then if we do not want to replicate the sales order from crm to R/3,then what will we do?
    Consider that all the middleware settings are configured and working fine..
    Puneet

    Hi Bokhal,
    Please consider my answer from your recent thread dealing with apparently the same issue :
    Hi Bhokal,
    For filters in uploads please consider below:
    For Filtering the BP-upload, use the Administration Console
    (tx. SMOEAC) in the corresponding subscription of the "All Business
    Partners (MESG)" publication assigned to the R/3 site.
    Some publications (and the replication objects they are based on) are
    delivered as type "Simple bulk" which does not give you the opportunity
    to assign criteria values for filtering.
    You might have to re-create the publication. To do that:
    1) First delete the subscriptions "All Business Partners (MESG)" and its
    publications & the replication object.
    2) Recreate the replication object as type "Simple intelligent".
    3) Afterwards you can create a new publication via wizard of type
    "Simple intelligent (msg)" assigned to the BDOC-Type BUPA_MAIN. Then,
    you will be able to select some "filter criteria".
    The reason for deleting the "old" publication is, that you
    are not allowed to assign a BDOC-Type to more than one publication.
    4) But please keep in mind that there is no realignment supported. So
    you should only use fields for filtering, which cannot be changed
    afterwards.
    This is the "simple" solution for filtering on fields. This
    will not provide complex filter criteria.
    If you need this, you shall create a filter function in R/3- and/or
    CRM-Inbound and -outbound.
    If you want to keep the control about the upload trigger, you can add an
    additional module in transaction CRMC_BUT_CALL_FU, position > 200000.
    BUPA_MWX_BDOC_BPS_FILL_CENTRAL. Within this new module, you can delete
    all partners within the complex structure that you don't want to upload.
    Hoping that above will be helpful.
    Best regards
    Christophe Sturzel

  • Error in replication sales order from CRM 5 to ECC 6

    Hi,
    I am new to the middleware
    When I am trying to replicate the sales order from CRM 5 to ECC 6, i found the following error in SMW01 “R/3 adapter is called
    Message no. CRM_ORDER_MISC024
    I am unable to track what may be the problem and even I have checked the SMQ1 & SMQ2 in both CRM and ECC but nil.
    Can anybody help me out?
    Thanks in advance

    Hi Binu,
    Try check also the SMQ1 & SMQ2 on R/3 when you start trigger the
    document transfer from CRM to ECC. If you cannot see any similar document
    appear here, seems like your Middleware filter has not properly set.
    Check Middleware filter for document transfer, if I am not mistake, the object
    is SALES_DOCUMENT.
    Just check, if there filter which block the document to be sent to R/3.
    Hope this helps.
    Gun.

  • Mass sales orders from CRM to ECC

    Hi,
    We have a requirement to mass upload sales orders from CRM system ECC system. I could not able to find any option to push sales orders in bulk from CRM to ECC.
    Could you please let me know if you know any kind of solution for this kind of scenario.
    Thanks in advance!
    Regards,
    Kumar B.

    Hi Maggie,
    Thanks a lot for your response. But I could not able find CRMD_MASS_UPDATE in CRM system as well as in ECC.
    Could you please let me know how to try this other please let me know the program or tcode.
    Regards,
    Kumar B

  • Creating ERP Sales Order from CRM 7.0

    Hi Experts,
    We are implementing the scenario-Creating ERP Sales Order from CRM. My doubt is:-
    Do we need to download the entire product data from ECC via middleware to implement this functionality?
    Is it possible that we manually create few products in CRM with same heirarchy and category and avoid middleware data download?
    My basic doubt is-what product information is passed to ECC from CRM when we create the ECC Sales Order? If only product id is passed, then we can avoid middleware data download for product from ECC to CRM.
    Can anyone please provide me some pointers on this? What should be the approach-download product data from ECC to CRM or manually create product data in CRM?
    Thanks and Regards,
    Rohit

    I´m trying to figure out the ERP Sales Order Scenario in CRM, i found the following link (sap.help) to customize the ERP sales Order in CRM, it´s a quickly guide supported by SALESPRO but in my case does not work, if somebody knows how to retrive the Order in IC i´ll appreciate.
    Here a quick Guide -->
    Prerequisites
    You can directly create and change an ERP sales transaction in SAP CRM once you have carried out the following:
    You are using SAP ERP for your Quotation and Order Management.
    You are using SAP CRM.
    You have assigned the relevant ERP sales transactions to a profile.
    You do this in Customizing for CRM, by choosing  Customer Relationship Management  Transactions  Settings for Sales Transactions  Define Profile for ERP Sales Transactions .
    You have defined an RFC destination.
    You do this in Customizing for CRM, by choosing  Customer Relationship Management  CRM Middleware and Related Components  Communication Setup  Define RFC Destinations .
    You have defined a business role by copying the standard business role SALESPRO to your own. You make this setting in Customizing for CRM, by choosing  Customer Relationship Management  Business Roles  Define Business Role .
    You have defined cross-system copy control of transaction types.
    You do this in Customizing for CRM, by choosing Transactions  Settings for ERP Transactions Maintained via CRM  Cross-System Copy Control for Opportunities and ERP Transactions
    I want to see the screens or video regarding with this scenario.
    Regards,
    Memo

  • Some Sales Orders are not replicating into CRM

    Hi guys,
    when I check SMQ2 in CRM,  I find that some sales orders are not replicating into CRM, then check the error, its says check SMW01..
    when I check the SMW01 it says validation error and BDOC status is F05 (information no processing). I tried to search the sales order in CRMD_Order transaction could not find the sales order...
    *Error in SMW01*
         Processing of document with Guid E01D11C71856C4F1AEBF0024E84DD0CE is canceled     CRM_ORDER
         Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG.     SMW3
    It's not giving much clue what's the error is...
    I tried to setup a request to replicate those sales orders.. those request also end up in the same error...
    any help on this?
    thanks,
    Ken

    Hello Ken,
    When reprocessing a BDoc(via SMW01) you might need to set a flag.
    Goto trxn. SMW01. Start the debugger using command '/h' and reprocess the BDoc. After going into the debug mode press SHIFT+F7 and put a breakpoint at 2nd Tab in : class:cl_smw_flow and method 'restart_processing'. Keep debugging(F5 or F6 accordingly) until you find the requisite flag l_retry_allowed and set it as 'X'. This will allow you to reprocess the Bdoc.
    Thanks,
    Rohit

  • Where does the Remaining quantity of a Sales Order line item reside in CRM

    Hi Experts,
    When a Sales Order from CRM flows to ECC and is partially delivered, it can be observed in the CRM system that the remaining quantity of the line item gets updated.
    In which table does this remaining quantity value reside in CRM ?
    Any pointers/suggestions would be of great help. Points Assured.
    Thanks in Advance,
    Kris

    The remaining quantity info is nowhere available.
    But the delivered quantity info is available in the table CRMD_CUMULATED_I.
    Solved Myself.

  • Error V2 005 when creating a sales order from a quotation

    I hope someone can come up with some ideas to help me with this error. My client is creating a sales order from a quotation and immediately on the first screen the error V2 005 pops up. The quotation was not created with reference to any previous document, and at this point not sold-to party has even been copied through to the sales order.
    To make this error more interesting, this is only happening with 1 particular customer.
    I have checked: credit management, customer hierarchies, material determination, customer info records and none of these are in use.
    Can someone please come up with some ideas?
    Thanks and regards
    Kikas

    Dear Sai,
    Thanks for this note I am going to try it, however I have some concerns because the issue is only happening in production, with 1 custoemr only, and QA is an updated copy of production and I could not replicate the error in QA using the same customer....
    If anyone has any other ideas please I would appreciate it
    thanks
    Kikas

  • Creating one Sales Order from Multiple Quotes

    Hello
    We are using SAP CRM 2007.
    I believe in CRM we can create one sales order from multiple quotes. We have a requirement where we need to create one Third party sales order from multiple Quotations.
    I have Item cat for Quotations and Sales Document maintained correctly.
    I also have copy control where ZQUO and ZSAL are maintained correctly. Where I have maintained settings for copying Transactions as well as Item Category.
    But when I go to CRMD_ORDER and retrieve quotes and try to do a follow on doc for sales doc , only the first Quote gets added into follow on document.
    Can someone tell me if I am missing any config?
    Thanks

    hello,
    in sap ui we use control button and select multiple quotes and then
    create the sales order as follow up as we have follow up button.
    Regards,
    Deepa

  • Migrate all Open Sales Orders From Legacy System (SAP) To SAP System using

    Hi Experts,
                 I've to Migrate all Open Sales Orders From Legacy System (SAP) To SAP System using Business Objects with a new SALES ORDER DOCUMENT NUMBER referencing the older one.
               I'll get all the required data with field in an excel file.
                 Does any standard transaction exist for it ? Or how to go ahead with it ?
    Thanks and regards,
    Jyoti Shankar

    Hi
    If you are checking for CREATE option then Sales Doc Type
    For more Info goto SWO1 transaction -> BUS2032 --> DIsplay --> Execute --> There SELECT the method which you want to perform... There you can fine the MANDATORY parameters also....
    Or in DISPLAY mode PLACE Cursor on the Required Method and CLick the PARAMETERS button on toolbar...
    That will show the MANDATORY parameters...
    Reward if helpful....
    Message was edited by:
            Enter the Dragon

  • Uploading open sales orders from sap

    hi all,
    i need to upload open sales orders from legacy to sap. pls advice what steps need to be followed for the same.
    1) how we will we download open sales order from legacy and where..... is it to some flat file or some other option is  there . pls tell some options.
    2) how we will uload the sales ordes into sap . thru lsmw or is there some other option ?
    3)  there will be more number of fields in sap than in legacy. i think we need to manully create an excel file and add more fields manually in excel file so that the compulsonry feilds as per sap are present in sap ?
    4) how will availability check happen  in sap after sales order are t/f from legacy ?
    rgds
    pamela

    hi pamela,
    1.a. you need to down load in EXCEL in legact format and convert the same in LSMW format and upload it
    2.a. LSMW - Functionally, BDC, BAPI - Technically. to my knowledge LSMW is better option.
    3.a. first you download to EXCEL file from LEGACY, then align the same to SAP format you can add those fields that are mandatory as per your requriment.
    4.a.You are uploading sales orders in SAP which are showing OPEN status from LEGACY before you uploading the sales orders MM consultant would have uploaded its stock through 561 - dont worry on that, even though if stock is not uploaded also not an issue it will confirm at the later date.
    5.a. we have used LSMW process for our PREVIOUS ASSIGNMENT, before that we tested BAPI for it some how it was not capturing some fields.
    hope all your queries are solved
    balajia

Maybe you are looking for