Reply to email in CRM

I have verified this problem on multiple enviroments, and I see it as a bug. Can someone please confirm.
If you IN CRM, reply to an email by opening the email record and click Reply, then there are created 2-3 open emails. Even if you the close the email that you are currently writing by the Red X in the right corner of the screen, thereby avoiding the Save
event, the open emails are still present in the CRM system.
My question is:
If I click the reply button in CRM, should it not only create 1 record that has status closed when you send the email?
If you click the reply button in CRM, should it not only create the "reply email record", when the email is either saved or send?
I have tested this on both CRM Online and OnPremise enviroments and both has this behavior. Both with Danish base lanuage. The onPremise enviroment with roll-up 9. (I see no fixes in Rollup 10 on this).
Example:
On a Case, there is a tracked email.
In CRM, if you click "Closed activities" on the case record and open an email and click "Reply", then there are created 2 email records, where only the 1 email record is closed if you click send. The other email record will still have a status open
and thereby prevent the case from being closed because of open activities.
Can someone confirm this? Or does anyone have a fix on this?
Rune Daub Senior Consultant - Dynateam CRM http://www.xrmmanagement.com

From my research I found that this issue was solved on update rollup 10 -
http://support.microsoft.com/kb/2710577/en-us
Two entries are inserted into the ActivityPointerBase table when replying to a tracked email.

Similar Messages

  • Can I set a default Reply-From email address on my iPad/iPhone?

    In Mail for the Mac, there is an option under the Compose settings to set a default Reply-From email address for all your emails, so that, regardless of which account any email came from, you will always reply by default from one specific address. Is there a way to set a default Reply-From address on the iPad/iPhone?

    [EDIT: Sorry, mis-read question. Ignore me.]

  • When I reply to emails my reply is at the bottom of the thread-is there a way to have my replies at the top so my recipients see them?

    When I reply to emails using icloud my reply is at the bottom of the thread where none of my recipients see it-they think I am not adding any content.  Is there a way to have my replies at the top of the thread so my recipients see them?

    This is so horribly frustrating! If you just hit "Reply" and start typing, your new reply starts right at the end of the original message, without even a carriage return. It's the exact opposite of how MobileMe -- and most other mail apps -- work.
    Can we either:
    Move the cursor position in replied messages back to the top, as it was before; or
    Add the option in Preferences to determine where you'd like your cursor to appear when you reply to messages

  • Feature Request:- Option to reply to reply to emails in text

    Hi there....
    Is it possible to set up replying to emails to send text (with no html)
    If not, can i get a feature request to send emails in text, or is there an app that has this feature?
    It is sad I get maybe between 40 and 100 emails a day, that I cannot reply to on my Touchpad, or Pre 2, as they only allow text email return.
    as of 2007, there were over 109 million yahoo group members across 8.8 million groups. Mostly support forums, sending and recieving emails to and from 109 million people.
    These support forums and other ghelp yahoo groups, require emails to be received in text, and in our email apps had to set for text only, to avoid viruses and other attempts at marketting.
    I get my yahoo support emails, on webos, but cannot reply from webos, and have to wait until i get to my laptop with thunderbird.
    please can you add text send/reply option for those 109 million plus yahoo group users who cannot reply to yahoo groups emails.
    thanks....
    this is a major pain and must be for others.
    ta
    Ralph :-)
    Sorry for typos
    Post relates to: Pre 2 p102ueu (Unlocked EU)

    Managing layered PSD files in Aperture
    For those who absolutely must manage layered PSD files in Aperture, here is the way to do it...
    1- In your original PSD file, HIDE ALL LAYERS above the background layer
    2- IMPORT this PSD file into Aperture
    3- CREATE A VERSION in Aperture by choosing to edit externally in Photoshop.
    4- Back in Photoshop OPEN THE ORIGINAL PSD file along with the new version
    5- LINK all the LAYERS in the original PSD file and DRAG them TO the new VERSION (holding the shift key down so they pin register)
    6- SAVE the new version in Photoshop
    7- Back in Aperture your version is now an exact layered copy of your original which will not flatten when reopened from Aperture into Photoshop.
    Obviously this process will be rather tedious if you need to deal with hundreds of layered PSD files, but if you are in that situation that implies you already have a workflow and a storage strategy that works well for you. So why change, especially to Aperture?
    Adobe Bridge or Media Pro or Portfolio are the obvious programs for you !
    Dual 2ghz G5   Mac OS X (10.4.3)  

  • Cannot create/reply/forward email on FireFox 15.0.1

    I was able to create/reply/forward email on AOL with FireFox 14 but with FireFox 15.0 the reply/forward feature only copied the email to the compose page on the first attempt - I had to end/restart FireFox each time I wanted to reply/forward. With the 15.0.1 upgrade I have lost the ability to create/reply/forward - the compose page works except I cannot issue the send or save commands (thank goodness for autosave). Switching to IE solves the problem but my browser of preferance is FireFox.
    This problem only exists for AOL webpage email - yahoo and gmail work perfectly.

    Is the problem with Send and Save that the buttons are missing or that they don't do anything?
    I don't have an AOL account to test, so I can only offer general advice.
    When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    (1) Bypass Firefox's Cache
    Use Ctrl+Shift+r to reload the page fresh from the server.
    (You also can clear Firefox's cache completely using:
    orange Firefox button ''or'' Tools menu > Options > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now")
    (2) Remove your aol.com cookies (save any pending work first) using either of these:
    * While viewing a page on the site, right-click and choose View Page Info > Security > "View Cookies"
    * Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
    Then try reloading the page. Does that help?
    A standard diagnostic to bypass interference by extensions (and some custom settings) is to try Firefox's Safe Mode.
    First, I recommend backing up your Firefox settings in case something goes wrong. See [[Backing up your information]]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
    Next, restart Firefox in Firefox's Safe Mode ([[Safe Mode]]) using
    Help > Restart with Add-ons Disabled
    In the dialog, click "Start in Safe Mode."
    If the site works correctly, this points to one of your extensions or custom settings as the problem.
    Any change?

  • Unable to send or reply to emails - getting Red X

    we have 40-50 BES accounts created and have had minimal issues activating accounts. this particular clients account is unable to send or reply to emails.We have hard reset device and recreated his account in our BES eviroment twice and still the same thing. We even tried both the AT&T 8310 and the verizon 8330 thinking it may be the services data plan.
    Any help is appreciated.
    Thanks
    Solved!
    Go to Solution.

    When you click on the red x, it will give u the error message.
    For example: Message status: desktop email program unable to submit message.
    Please tell me what message you see.
    Also,
    Full BES version:
    OS version:
    Membero server or domain controller:
    Users total on BES:
    Users having this issue:
    Mail platofmr version (eg; exchange 2003 sp2):
    If your issue is resolved, put a checkmark in the green box that contains the resolution.
    OR
    If it was just/or also really helpful - Give it a Kudos.. Go on Mate.. Help the rest of the clueless blackberry user world find their answer too..
    ~Gday from Down Under~

  • Reply-to email address

    Hi,
    I need a bpel process to receive the reply-to email address from the ns_emails.xml file or /orabpel/domains/default/metadata/MailService/oracle.xml file.
    I'm setting the replyto address for an html href link during a xslt transformation prior to sending an HTML email with the links included in the body.
    Has anyone do this? as I do not want to hard code the email address in the BPEL process.
    Phil

    I had a similar issue, here's what eventually worked for me:
    Up until the MM update this week, all my calendars ("Work", "Home") were "On My Mac" and were always synced over the air. To be able to respond to invites with my work email address, the latter had to be the first one in the list of email addresses in my own address card in Address Book. I barely ever receive any invites on my home calendar, so if I ever responded to them with my work email, that wouldn't have been an issue for me. On the other hand, it was very important for me that responses sent from my work calendar were sent with my work email address.
    Since the MM update, it seems that I can respond to an invite ONLY IF the invite was sent to my MM email address. Remember that after the upgrade, all your "On My Mac" calendars have been moved to "[email protected]". So I created a new work calendar "On My Mac", and when I receive an invite, instead of double-clicking it, I drag it to my work calendar. Then I'm able to respond to it with the correct work email address. The downside is that now the calendars "On My Mac" don't sync over the air thru MM anymore, so my iPhone is only updated when it syncs with iTunes.

  • Changing "Reply to" email option in iPhone 3.0?

    I am wondering if anyone has heard about Apple adding a "reply to" email change option? I don't want to use Gmail or anything like that. I just want a native option to do so.

    Anyone who would know would be a developer and under a strict NDA. You'll just have to wait and see like the rest of us.

  • Having trouble with Tiscali/TalkTalk site when accessed with 'FireFox', can't 'reply' to emails or report 'spam', other functions seem ok

    Having trouble with Tiscali/TalkTalk site when accessed with 'FireFox',
    can't 'reply' to emails or report 'spam', other functions seem ok
    == This happened ==
    Every time Firefox opened
    == On/Off few months now all time

    Try deleting cookies and cache:
    1. Tools| Clear recent history
    2. Time range to clear: Everything
    3. If it isn't already selected, select '''Cookies''' and '''Cache'''
    4. '''Clear now'''
    <u>Check cookie exceptions</u>
    1. Tools | Options | Privacy Panel
    2. Set '''Firefox will: Use custom settings for history''' Insure Accept cookies for sites and accept third-party cookies is selected
    3. Click '''Exceptions'''. If the misbehaving site is in that list, select it and click '''Remove site'''
    Also see [[Updating Firefox]]

  • Just upgraded and cannot send or reply to email

    I just bought a MacBook Pro (15"/216gHz/2gig ram) and transfered everything via firewire from my old PowerBook G4. When I attempt to reply or forward email, I click on the button (or use the menu) and absolutely nothing happens. I can click compose and get a new email screen, but when I click to send nothing happens. I receive email without troubles from all my accounts. I have no problem sending and replying to email with my old G4 (and the other computers on my Airport network - so it's not the network) and all the preference settings for my accounts are identical. Any ideas or assistance?

    In the other thread where you posted about this problem, I suggested you to reset Launch Services. Have you tried that or not?
    I’ll repeat it here in case someone else having the same problem comes accross this thread. The following article describes how to manually reset Launch Services — the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
    Resetting Launch Services
    If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, take a look at this other article for general troubleshooting and cache-cleaning procedures. Actually, you should also verify/repair the startup disk (not just permissions), as described there:
    Resolving Disk, Permission, and Cache Corruption
    The most appropriate utility for this particular problem probably is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
    Side effects of System cache cleaning
    As an example, this is how you should proceed with OnyX:
    1. Quit all applications.
    2. Launch OnyX and enter your administrator password.
    3. Go to Maintenance > Reset and check LaunchServices database.
    4. Un-check any other pre-checked options.
    5. Click the Execute button.
    6. Restart the computer.

  • In Itunes I cannot chose MS Outlook when syncing contacts. I can only chose Google contacts, Windows contacts and  Yahoo! Address book. The reply for email and calender is email and calender program cannot be found. Although I have MS Outlook installed an

    In Itunes I cannot chose MS Outlook when syncing contacts for Iphone 4. I can only chose Google contacts, Windows contacts and  Yahoo! Address book. The reply for email and calender is email and calender program cannot be found. Although I have MS Outlook installed and fully operational. Have anyone a solution to this issue?

    Which operating system is on your computer?
    and is itunes up to date
    can you tell whether it worked before?
    think as first step i would reinstall itunes

  • How to set my "reply to" email address to an email forwarded address

    I own my own url, which is my last name, and I want the emails I send from mail to actually look like they came from "[email protected]" and not from the cryptic email name that my dsl provider assigned to me. By the way, "[email protected]" email addresses actually is set up to forward emails replied to it back to my cryptic email address (that is my real dsl email address).
    I almost lost myself there, but my basic question is how do I tell "Mail" to send out a different reply email address when I send someone an email.

    Does your ISP/DSL provider allow customers to enter a different email address to be shown as the sending address for an email account provided by the ISP?
    If so, enter [email protected] in the email address field under the Account Information tab for your DSL account preferences.
    This will appear as the sending email address for the account.
    If your ISP restricts their customers from doing this (some do since spammers don't provide a valid sending or reply to address with their bulk spam mailings), you can include a Reply To address field for the message header but the reply to email address must be entered manually for each sent message.

  • How do I attach file into reply existing email?

    How do I attach file into reply existing email?

    Shoudl I save images (scanned documents) prior to saving them....
    Not sure what you mean by 'save them before saving them'....

  • Error message on trying reply to email

    Ipod touch error message when replying to email.  "....message was rejected by the server because it does not allow relaying".  What is relaying...I want to reply to an email?  All of my contact emails are being rejected.

    Sounds like you have more than one mail account setup on the iPod. The Mail works by first trying the sent a email to the outgoing (SMTP) server associated with that account. If that is not sucessfull it they tries sending using the SMTP servers for other account on the iPod. However, many accounts only allow sending email if the sender is sending it from the account associated with the senders email account.
    Thus, the SMTP server the account associated with the sending account is either not working or you have an incorrect settings.
    Can you send messages from that account on another device?

  • Can't open, delete or reply to emails

    Hi
    I really need your help.
    I use my emails to work and am now behind with work as since last night I cannot open, delete or reply to emails.
    I can open the account, but it will only show the text of one email. If I want to delete it, there is absolutely no action. I cannot open other emails and when tried to reply, it was sending it for hours with no success (maybe it was sent, but it was still showing the message that it's in the process of sending. Nothing appeared in the sent folder.
    Please help as I really need it to work.
    Thank you
    Maggie

    <blockquote>
    I can open the account
    </blockquote>
    I'm not sure I understand what that means. Can you explain what you're doing and what happens?
    <blockquote>
    but it will only show the text of one email
    </blockquote>
    Would exactly would you expect to see?
    What is your anti-virus software?

Maybe you are looking for