Report Builder - Add report Processing time

Hi,
I was wondering if there was any way to add a value field to a report, with the time it took for the report to Process.
It would probably be a text field with an Expression, but don't know how that would go.
I know that in Expression there is a value for ExecutionTime (when report began to run), but nothing about when it ends.
Can this be done? and if yes, how?
Thanks

Try the below expression in the text box,
="Execution Time: " +
CStr(System.DateTime.Now.Subtract(Globals!ExecutionTime).Hours) + " hour(s)" + " , " +
CStr(System.DateTime.Now.Subtract(Globals!ExecutionTime).Minutes) + " minute(s)" + ", " +
CStr(System.DateTime.Now.Subtract(Globals!ExecutionTime).Seconds) + " second(s)"
We have another option,
USE [ReportServer]
SELECT ReportID
, TimeStart
, TimeEnd
, TimeDataRetrieval
, TimeProcessing
, TimeRendering
, TimeDataRetrieval + TimeProcessing + TimeRendering AS TotalRenderingTime
FROM dbo.ExecutionLog
ORDER BY TimeStart DESC
Regards, RSingh

Similar Messages

Report Builder Built Report Security

I have tried adding the path admin/common/reports/ReportLaunch.aspx to the WebPage security object.
But it does not work.
How does one go about assigning security to the reports created using the Report Builder.
Thanks,
Mike

I am bringing this up again as I did not get any answers.
How does one add authorization security to the reports built via report builder?
I have already tried securing the menu path and other techniques that are already present but to no avail.
Mike

R3P- Project builder Network activity processing time

Hi Gurus,
I have created a Network activity (internal)for our equipment to be dispatched at CM21.
I have input 250.0Hrs and the NWA scheduling date as follows:
Cannot start before: 07/28/2010
Finish not later: 08/31/2010
the NWA work center has the operating time of 8.00H and execution formula of SAP008 Proj:RqmtsNetwkMaint
but upon checking at the NWA 'date' tab the earlier tart date was 07/29/2010 and earlier finish date was 08/08/2010 and the duration was computed 1.5WK it still computes for 24Hrs whereas it should compute 8hrs only.
Please advise what should i change or which should i set up?
thanks.
God bless
-cheann

Hi,
Please create New network under L3 WBS element then you have to create Activity that time system give different activity number
as per above mentioned screen shots showing - same activity numbers why because - while creating activity system has considered same Network number to L3 wbs element
please create new Network under L3 WBS Element
then your issue will be clear
Thanking you
Mahesh

SQL Report Builder 3.0 Automatic Scheduling feature ?

Hello All,
We have installed and commissioned a HMI SCADA solution for Shell Petroleum South Africa, We are using Copa Data Zenon for our HMI solution, Zenon's historian are writing variable values into a SQL database from where we are reading these variables with
I-net Clear Reports.
However, I net Clear Reports uses a "PLUS" license which is used for the scheduling function. The license is priced based on the amount of CPU Cores the server has and ours has 16 cores so the license is extremely expensive.
What we need :
To create a report with values from a SQL Database.
Report must be able to be scheduled, to run at specific time.
I have done some testing and used the same SQL queries we used in I-net clear reports.
SQL Report Builder 3.0 does get the variable values when you hit "run" , but it does not look like there is an automatic report scheduling function ? We want to execute a daily , weekly & monthly report.
Does a Scheduling feature exist ?? Please advise
I would highly appreciate your assistance.
Regards.
Paul
Automation Engineer

Hello，
Report Builder 3.0 is just a report authoring tool.You can design and preview the report with Report Builder,or you can publish your report to a report server or a report server in SharePoint integrated mode, where others can run it. There is no schedule
running function in Report Builder which can processing the report automatically.
SQL Server Reporting Services Standard edition or high edition support email and file share subscriptions and scheduling. You can create subscriptions that can automatic running the report based on a schedule(daily , weekly or monthly ) and send reports
to a shared folder or to an e-mail address.
Reference:Subscriptions and Delivery (Reporting Services)
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Is it possible to create an interactive graph/chart using Report Builder 3.0?

Hi All,
I am using Report Builder for the first time. Here is what I am trying to accomplish. The data I plan to use in Report Builder is coming from SQL Server and in the Report Builder I want to create an interactive graph(chart).
For example, The table in SQL Server consists of Hospital Name, Measure name, and Scores for each measures for different quarters.
The idea is to create a graph that will allow the user to pick the measure name(from a drop down list or something similar) and Hospital name, then the graph will display the measure scores for different quarters and corresponding target scores for that
particular Hospital.
The data in SQL server looks like this :
measure
MC_NM
q112
q212
q312
XXY
TARGET
0.9
0.9
0.9
XXY
REGION
0.832879
0.848934
0.865714
XXY
Hospital 1
0.875
0.916084
0.92
XXY
Hospital 2
0.833333
0.876923
0.905797
ZZZ
TARGET
0.979167
0.952381
0.955556
ZZZ
REGION
0.942029
0.945205
0.983871
ZZZ
Hospital 1
0.22
0.270833
0.372549
ZZZ
Hospital 2
0.990291
0.989583
0.98913
YYY
TARGET
0.928934
0.9
0.891429
YYY
REGION
0.590909
0.655172
0.703704
YYY
Hospital 1
1
1
1
YYY
Hospital 2
0.788462
0.82
0.836735
Is this is possible to do in Report Builder 3.0? Please share your thoughts.

Thanks a lot for your response.
I was able to create the parameters and now able to select the measure and facility and display that data in the table and chart.
Now I am trying to see if I can add a line(target values) on top of the column chart to show the whether the scores of each measures, for each quarters are how far from the target values.
Please let me know if this is possible.

Cannot create dataset from claims based authentication sharepoint site in report builder 3.0

I have a sharepoint site, which is configured as claims based authentication (ref:
http://ashrafhossain.wordpress.com/2011/05/25/how-to-configure-claim-based-authentication-for-sharepoint-project-server-2010/) . both AD and asp.net members can log in to the site successfully. My user need to use the report build to create report
on this sharepoint site. As a result, the site is also integrated with reporting service. I try to create a report in the sharepoint site by clicking "New Document" -> "Report builder Report". The report builder will comes out and ask for credential to
connect to the report server. I use asp.net member to login and it can let me to create a data source which connect to a the list of the sharepoint site with credential option "Use current Windows user. Kerberos delegation might be required". However, when
I try to create a data set and click the query designer, error "Server was unable to process request. ---> Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))" appear as below:
Besides, non of my AD account can be used to login to the report builder. Errors below found in the ULS log:
09/26/2012 14:47:27.75 w3wp.exe (0x116C)
0x11F4 SharePoint Foundation
Claims Authentication fo1t
Monitorable SPSecurityTokenService.Issue() failed: System.ServiceModel.FaultException`1[Microsoft.IdentityModel.Tokens.FailedAuthenticationException]: The security token username and password could not be validated.
(Fault Detail is equal to Microsoft.IdentityModel.Tokens.FailedAuthenticationException: The security token username and password could not be validated.).
09/26/2012 14:47:27.76 w3wp.exe (0x140C)
0x0F38 SharePoint Foundation
Claims Authentication fsq7
High Request for security token failed with exception: System.ServiceModel.FaultException: The security token username and password could not be validated. at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.ReadResponse(Message
response) at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst, RequestSecurityTokenResponse& rstr) at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken
rst) at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context, Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs, SecurityToken delegateTo)
524a2f96-f5ff-4c96-80d1-f08d3c7ef14f
09/26/2012 14:47:27.76 w3wp.exe (0x140C)
0x0F38 SharePoint Foundation
Claims Authentication 8306
Critical An exception occurred when trying to issue security token: The security token username and password could not be validated..
524a2f96-f5ff-4c96-80d1-f08d3c7ef14f

Hi Foxvito,
Claims authentication types supported by SharePoint 2010 are Windows Claims, forms-based authentication Claims, and SAML Claims. In SAML-Claims mode, SharePoint Server accepts SAML tokens from a trusted external Security Token Provider (TST). From the
blog you referenced, it seems to use the SAML Claims authentication.
However, the Reporting Services client applications: Report Builder, the Report Designer in Business Intelligence Development Studio, and Management Studio do not support connecting and authenticating with LiveID or SAML Claims based SharePoint Web applications.
That's because the SAML Claims don't use the Reporting Services authentication endpoint. So, you have to change the Claims authentication type to use Report Builder on the SharePoint site.
References:
Overview of Kerberos authentication for Microsoft SharePoint 2010 Products
Claims Authentication and Reporting Services
Regards,
Mike Yin
Mike Yin
TechNet Community Support

MS Report Builder Data Source Missing

Hi,
Simply, when I log onto my server with a local or domain admin and open report Builder, I right click
on Data Sources and choose add. I choose the one (only one) in the list and test (successfully) the connection.
However, no other users see the Data source and trying to create one fails. They are local administrators. They have been added as admins in SQL and the DBs. I have rechecked all the permissions and the user has full admin rights to the server, SQL and DBs.

Hi Analog-Kid,
According to your description, when users click “Edit in Report Builder” on report server to launch click-once report builder, if users want to add a shared data source, they can’t see the shared data source list which resides on the report server, right?
In your scenario, please check if those users could access the Data Sources folder on the report server. If not, please grant users permission to access this folder with Content Manager role on Security page. Also please connect to report server instance
from SSMS, then check if Manage data sources has been selected.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Hanging Report Builder and Runtime-6i

Hi
The Reports 6i Builder and Runtime screens are taking 15-20 minutes to open in Win NT Environment.Earlier they used to work just fine.In this 'vaccum' time the task list shows Program not responding but eventually after 10-15 minutes ,the window opens fully.Please note that connectivity is ok and this time i am not running any report ..just starting the Report Builder or Report Runtime 6i. Same problem is occuring with Reports Queue Manager as well ,running as a service on this pc.
Any sort of advice welcomed.
Thanks.

This seems to be a problem of Windows NT environment in which the reports are running and not problem with Oracle Reports as such. I suspect some DLL has got corrupted and you have to rebuild the pc again..try re-installing Windows again .
Cheers

Report Builder 10 Crashing while generating to pdf

I can get a report to show all the pages in previewer mode.
However, when attempting to generate to pdf, report builder crashes at random times. Not at just one page, but whenever it feels like it.
Report is 4,000 pages, but I've ran 15k page to pdf before. And it is NOT the report, it crashes on all reports.
We've had some recent windows security updates pused to us recently, but that is it as far as system changes go.
Environment:
Win XP, SP3
Report Builder 10.1.2.0.2
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production

Report Builder 10.1.2.0.2That is the base version of Developer Suite that you can download on OTN. I would at least start with upgrading to the latest patch, especially since you connect to an 11g database.
Another thing: do you have this problem in Reports Builder, or on the application server? Latter case: check your AS version against the certification matrix too.
Edited by: InoL on Jan 27, 2011 11:37 AM

Run a report in report builder connect with dynamic nav developpement

I can't run my report for testing it in report builder app. Each time i have to save it, close report builder et run the report i create in dynamic nav developpement. It is possible to run the report create in report builder directly?
In report builder
I set the data source connection string in the datasource propreties an is ok.
The error is about the dataset_result (when i run the report)
Query execution failed for dataset 'dataset_result' Query CommandText isn't initialize.
When i use dynamic nav developpement the query is construct and past to report builder i think ?
Do i have to rebuild query for each report i use ?
Sorry for the english, i'm french

Try on Dynamics Community forum: https://community.dynamics.com/nav/f/34.aspx

SQL 2012 Report Builder + UAG

Quick description of setup: I have 4 total SharePoint servers, 2WFE's, 2APP's, and a SQL Cluster. I am using SQL 2012, + I have installed the reporting services add-in for SQL 2012 and have gone through the entire setup. Everything works,
KCD, stored credentials, I am able to create reports within report builder, launch report builder and so on... When I publish the site using UAG, report builder fails to connect to the report server, in this case either of the WFE's in the farm. I thought
initially it was "body parsing" since looking at the diagnostic logs I noticed that the request coming in looked as if the /_vti_bin/ReportServer/ portion was missing and all I saw was "sitename.something.local:443/ReportService2010.asmx". I added some
entries to skip body parsing and that didnt seem to work at all.
Running FIDDLER - I noticed that when I launch report builder, there is a 302 redirect to the main trunk, or the trunk to which the site is published on. I see a bunch of 302's, and it just stops.. never connects. When I try to connect from within
report builder, I get an error saying "cannot connect to https://sitename.fqdn" make sure the url is correct and or you have permissions.
It seems to me that report builder does not work through UAG. Can anyone suggest a fix?

Hello,
I have a same issue, after search, they are saying to make delegation if you are using Kerberos but it didn't work either, so is there any configuration needed.
Regards,

How to use Report Builder with permission extension

Is there any method to let web site which use SSRS and Report Builder use different permission extension module?
In our web site project we use ReportingService2010 Methods to show and operate folder and report which stored in Report Service, in our project configuration file, we use windows authentication mode for Report Service.
In requirement 1.User can do any operation in folder “A” and folder “B” (we can create and delete report or folder) in web site. 2.User can’t use “Report Builder” to save reports which created by Report Builder to folder “B”, Reports which created by Report
Builder only can be saved in folder “A”. [User click “Report Builder” button in our web page to start Report Builder, use “Report Builder” to create report, if user want to save report, we need to hidden folder “B” in “Report Builder” or we need to remove
some operate right from folder “B”.]
We have two solution:
1. We want to write extension module to process this issue, we want to re-write CheckAccess method which will be called by web site backend and Report Builder, but how can we know who called CheckAccess method[Web site backend called CheckAccess method
or Report Builder?]
2. We want to let Web site back-end use permission extension module named WebSitePer.dll, and Report Builder use PBPer.dll, how to modify the configuration file?

Hi Fang,
As far as I know, SQL Server Reporting Services (SSRS), have no permission extension. In Reporting Services, it is use role-based security to grant user access to a report server. There are two types of roles: Item-level roles and System-level roles.
Based on my test, if we assign user with System User System-level role, the user will have permission to user Report Builder to create report. However, if we only assigned Browser or Report Builder Item-level role to the user, he/she will have no permission
to publish the report to the report server. In this situation, although user have permission user Report Builder to edit the report, it will have no effect of the report in report server. User who has assigned Browser or Report Builder Item-level role will
have no permission to delete report in the report server.
There is an article about Setting Permissions in Reporting Services, you can refer to it.
http://technet.microsoft.com/en-us/library/aa337491(v=sql.105).aspx
Hope this helps.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Enable tracing in report builder

Hi,
I am relatively new to oracle reports and report builder.
One of the report in our application is taking long time (5-7 Minutes) to execute. To pin point the reason, I executed the report and generated TKPROF for sql trace file. Execution of queries in database are not taking long (entire execution at database end finishes in 1 minute). That done, now I am trying to identify if formatting of the report (report is generated in PDF format) is consuming time.
To enable tracing, i referred steps as mentioned in oracle documentation
http://docs.oracle.com/html/B14048_02/pbr_tune.htm#i1006821
however, on my report builder, the tracing option is disabled.
Could anyone direct me to the right direction.
Report Builder version
Report Builder 11.1.2.1.0
ORACLE Server Release 11.1.0.7.0
Oracle Procedure Builder 11.1.2.1.0
Oracle ORACLE PL/SQL V11.1.0.7.0 - 64bit ProductionOracle database version
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production

SQL tracing only tells a part of the story. You need to enable reports tracing. I have had little luck enabling tracing thru the builder. I have had much success enabling tracing via the servlet parameters or the command line.
You need to set the following params:
TRACEOPTS=TRACE_ALL
TRACEFILE=rwservlet.trc
TRACEMODE=TRACE_REPLACE
The resulting log.xml can be found at (ORACLE_HOME\reports\log)
Happy coding!
Monty

Reports Builder has encountered a problem

Hi,
I am getting the following error couple of times today whenever I work on Reports (Reports Builder 6i):
Reports Builder has encountered a problem and needs to close. We are sorry for the inconvenience.
If you were in the middle of something, the information you were working on might be lost.
Please tell Microsoft about this problem.
We have created an error report that you can send to us. We will treat this report as confidential and anonymous.
To see what data this error report contains, click here.
Does anybody know why I'm getting this error.
Any suggestions/advises would be appreciated.
Thanks.

This is a very known problem among the report developers, and no fixes exist. Just the Report Builder is buggy, and that's it. Something to do with memory allocation or like. The more complex the reprot is and the more other applications are open in Windows, the more often this error comes up. Save your report design as often as possible, that's the bottom line. If the error is still to often, reboot the PC. From time to time I had to reinstall the Report Builder with the patches to decrease the frequency of the error.

Problems with report builder 3.0 in SCCM 2012 R2 CU2

Hi All
I have problems with editing (Using Report builder) existing reports or creating new ones in SCCM 2012 R2 CU2
We version of SQL we use is SQL 2008 R2 SP2
I already asked this question in the SCCM 2012 forum but the problem is not related to SCCM but has something to do with application report builder
I changed the registry key and edited the Microsoft.ConfigurationManagement.exe.config.xml as described in the following link
http://blogs.technet.com/b/smartinez/archive/2012/07/03/system-center-2012-configuration-manager-create-report-don-t-work-what-do-i-do-now.aspx
Afterwards I try to edit an report I see report builder is being downloaded and after it generates the following error “Application did not succeed. Unable to continue”
Error details are
Following errors were detected during this operation.
* [22-7-2014 13:55:07] System.Deployment.Application.InvalidDeploymentException (HashValidation)
- File, Microsoft.DataWarehouse.dll, has a different computed hash than specified in manifest.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, Hash hash)
at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, HashCollection hashCollection)
at System.Deployment.Application.ComponentVerifier.VerifyComponents()
at
System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification notification, DownloadOptions
options)
at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
And in the SmsAdminUI.log I noticed the following error
[16, PID:4460][07/21/2014 14:11:43] :[ReportProxy] - User-specified default Reporting Point [Server1.local.nl] could not be found, [Server2.local.nl] is now the default Reporting Point.
[1, PID:4460][07/21/2014 14:11:11] :System.InvalidOperationException\r\nThere is an error in XML document (1, 1).\r\n at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle, XmlDeserializationEvents events)
I removed the reporting point no luck -> I already installed report builder 3.0 local on my computer still no luck.
I hope someone can give me some advice , I am lost with this error
Thx in advance
Regards
Johan

Hi Miss Katherine,
1. I went through the SQL steps in the link you posted
2. I updated the Reg Key and Microsoft.ConfigurationManagement.exe.config file with 3.0 on both the
server and the console machine.
3. I copied the .DLL file from your OneDrive and replaced the existing one on the server.
4. I uninstalled and re-installed the reporting role on the server and received the 1015 in the log.
5. I restarted the server and the client machine
I do get a slightly different error now after using the new DLL
Errors With Original DLL
ERROR DETAILS
* [9/30/2014 8:42:03 AM] System.Deployment.Application.InvalidDeploymentException (HashValidation)
- File, Microsoft.DataWarehouse.dll, has a different computed hash than specified in manifest.
- Source: System.DeploymentERROR DETAILS
Errors With New DLL
ERROR DETAILS
Following errors were detected during this operation.
* [9/30/2014 9:17:13 AM] System.Deployment.Application.InvalidDeploymentException (RefDefValidation)
- Reference in the manifest does not match the identity of the downloaded assembly Microsoft.DataWarehouse.dll.
- Source: System.Deployment

Report Builder - Add report Processing time

Similar Messages

Maybe you are looking for