Report Designer - No of columns
Hi,
I have a report that is created in query designer, Whcih has got approx 35 columns.
I called that in report designer and made changes as per requirement. Bu tht issue is when i say "Fit width to page" and say print preview. Its showing very small font and its unreadable. I know 35 columns is huge number. But is there any way we can achieve this?
My client has got the print out which looks good when designed in Excel But ours is report designer and will be executed in web.
Can we acheive the same in web compared to excel?
Thanks
Annie
Hi,
Thanks for your reply.
As you mentiond that report designer is used for formtted reports. I created report in query designer and formatted the report in report designer as per user requirement. But when i call in in web, due to more number of columns, the print is very small. My page is landscape only.
In WAD, I cannot call my report (created in Report designer) directly from analysis item. Only way i can call is thru Report web item. I did that but still my report shows very small. I dont have any options of setting number of columns for report web item. Any other suggestions?
Thanks
Annie
Similar Messages
-
I have some problems inserting queries into the report designer.
It seems only queries containing only key figures in the columns can be added as data provider.
If I have a characteristic in the columns I get a message: "Report Designer does not support this query drilldown. Do you really want to delete this section ? and at least one Characteristic in Rows!". (I also have characteristics in the rows. )
When I remove the characteristic from the columns, it works.
Is my assumption correct or am I missing something ?Hi Guys,
the correct answer is:
the report designer needs fixed Columns. During Designtime the numbers of columns needs to be fixed, due to mapping reasons. This means if you have 2 dynamic parts Char in rows and columns, the runtime can not identify the corresponding rowpattern which should be applied. There for the limitation Fixed columns exists. But it should be possible to have 2 structures in the columns and several characteristics in Rows.
best regards,
Kai -
Report Designer with two Structure in Column
Hi Experts,
Is not possible a Report Designer use a query with 2 structure in column ?
If i need use two structure in the column, exist a workaround for this case ?
Tks and best regads ...
AlexUnfortunately not.
You may try to work around to have set of virtual chars and key figures; but resposne time will not be encouraging.
Ravi Thotahdri -
How to create some columns dynamically in the report designer depending upon the input selection
Post Author: ekta
CA Forum: Crystal Reports
how to create some columns dynamically in the report designer depending upon the input selection
how export this dynamic report in (pdf , xls,doc and rtf format)
report format is as below:
Element Codes
1
16
14
11
19
10
2
3
Employee nos.
Employee Name
Normal
RDO
WC
Breveavement
LWOP
Sick
Carers leave
AL
O/T 1.5
O/T 2.0
Total Hours
000004
PHAN , Hanh Huynh
68.40
7.60
76.00
000010
I , Jungue
68.40
7.60
2.00
5.00
76.00
000022
GARFINKEL , Hersch
66.30
7.60
2.10
76.00
In the above report first column and the last columns are fixed and the other columns are dynamic depending upon the input selection:
if input selection is Normal and RDO then only 2 columns w'd be created and the other 2 fixed columns.
Can anybody help me how do I design such report....
ThanksHi Developer life,
According to your description that you want to dynamically increase and decrease the numbers of the columns in the table, right?
As Jason A Long mentioned that we can use the matrix to do this and put the year field in the column group, amount fields(Numric values) in the details, add an filter to filter the data base on this column group, but if
the data in the DB not suitable to add to the matrix directly, you can use the unpivot function to turn the column name of year to a single row and then you can add it in the column group.
If there are too many columns in the column group, it will fit the page size automatically and display the extra columns in the next page.
Similar threads with details steps for your reference:
https://social.technet.microsoft.com/Forums/en-US/339965a1-8cca-41d8-83ef-c2548050799a/ssrs-dataset-column-metadata-dynamic-update?forum=sqlreportings
If your still have any problem, please try to provide us more details information, such as the data structure in the DB and the table structure you are currently designing.
Any question, please feel free to let me know.
Best Regards
Vicky Liu -
XL Reporter: Report Designer - Sales Document Type as Column
Hi Everyone,
I have a question regarding report layout in XL Reporter - Report Designer. Here's the scenario:
I have created a Sales Volume Report wherein the report should be able to display the quantity per material per sales document type (Sales Order, Invoice, Credit Memo). The Sales Document type is expanded as Column so that the user can view the total per Sales Document. My problem is, can i re-arrange the order of display of the 3 sales document selected. The current (and I think the default order is alphabethical) which is A/R Credit Memo, A/R Invoice, Sales Order. Can I re - arrange it in my Report Designer so that Sales Order will be the 1st column, followed by the A/R Invoice then lastly the A/R Credit Memo?
Another question, can I change the Display Name of the 3 Sales Document Type? By default, the Sales Document Name is being retrieved by the system. For other fields which where not expanded as column, I can easily change the Display name of the field, but for the sales document, I don't have an idea. Hope anyone can help me.
Thanks in advance.
MaluIf you want the document types in a specific order, don't add as an expansion, but as individual summary comuns, then you can add them in the order you want.
You can use simple Excel formula to rename the columns - hide the row with the column names & add a new row with if statements based on the value in the cell e.g. if (cell = 'Invoice" , "Inv-AR",'') -
How to display top 2 countries in 2 columns in Report Designer
Hello Gurus ,
I have a requirement where top 2 countries has to be displayed in two different columns in Report Designer.
is there are way to do that, i tried many differetn ways but was not successfull, apart from creating text variables and writing customer exit.
I appreciate your help
Thanks,
KumarHi,
I am not sure what version you are, from version 9.3 I think there is a "Top" function, just highlight the row, tick the option for "Top", set the number and the column
Failing that if you need to use rank could you not hide the column.
Cheers
John
http://john-goodwin.blogspot.com/ -
Charts in Report Designer - choosing columns and rows for categories
Hi,
I am trying to create a pie chart in report designer from a data provider which has 4 rows and 4 columns. As a default the chart created is using the 1st row for data and the four columns as categories.I want the pie chart to use the first column for categories and 2nd column for data. How do I change the default chart behaviour?
Best regards,
JaiHi Jai,
take a look at:
"Class 1 Chart Types" in http://help.sap.com/saphelp_nw04s/helpdata/en/c9/08533b97037963e10000000a114084/frameset.htm
Link is regarding WAD web item but editing is the same in Report Designer.
Here you will get information with example query for editing pie charts and what is possible or not.
like:
Structure of the Data Provider for a Pie Chart
In a pie chart, the underlying table has only one row. The values in the columns form the pie segments.
If the table contains more than one row, the additional rows are ignored when the table is converted into a chart. However, you can define which row is to be used (see below).
Additional the link describes how to build the query for your requirement.
Regards
Andreas -
Report designer error for hierarchial structure on Columns
Hello,
I have a query with a structure in rows and another one in columns. I also have a 0COMPANY hierarchy Dimension within the Columns.
When I insert the data provider into a report designer report, I receive the following error:
"Query contains a hierarchial structure on Column(s)..."
Has any one encountered this issue before? Is there a note or workaround available?
Thank you.
Sri YallaHi,
the report designer need to have a fixed number of columns. If you have a Hierarchical Structure in the Columns, the number of columns can change. Therefore Report designer does not allow to use this DP in this drill down. You should place the Row structure to the columns and the hier-structure to the rows. then it should work.
best regards,
kai -
Report designer - Printing option - chops off columns to fit in page
When I run a report from report designer, it runs perfect(can scroll to end with all the columns) - but when i try to change to print format(PDF), it chops of many columns of the report to fit into the page... I have a query with 15 columns but in the PDF i get only 4columns.
Is there any workaround to squeeze in the whole report (*might be landscape) or Is this issue addressed in any OSS or SP?
Thanks in advance folks,
VoodiHi Karol, thanks for the answer. Sorry for all the dumb questions, but the report designer is altogether a new animal. Not to mention I havent worked on this.
I havent specified any page size for my report. When i run the report in the portal, the web page contains all the columns and not in PDF. Where can set the page size in the report designer to determine the size of my page.
And is there a way, where i can set an option to embed the report into PDF as a landscape(not while printing, but embbeding). -
Report Designer - Chart and data
Hi,
I have a query section. In one of the cell, I have a chart. I have the data in other columns on the side of the chart. When I execute the report designer, I get the chart and the then the data below on the side. When I create a pdf, the data moves up to the side of the chart. I want the web view look like the pdf view where the data is on the side of the chart. Is it possible? Why is the web view and the pdf view different?
Best regards,
JaiMoved to BOE Admin forum
-
Hi,
I'm executing my query in report desiner but as per the requirement i need to delete some of the columns in the report designer of the selected query.
when i'm selecting the column and click on delete colum it is not deleting the column.
Please advice me to use this funcitonality.Hi,
on which frontend SPS you are? Maybe there is an OSS note for it.
Regards,
Juergen -
To view reports in new page for each cutomer using Report Designer
HI all
I have a requirement to view the data (key figures) for each customer in a new page.
I have created the same using the Report Designer tool.
Now there is setting for this Group Header 'Customer' i have selected the option 'repeat group header on each page'
still the query when generated, gives fine results for certain cases but not for all.
like it will show the each customers in a fresh page for some pages , then in midst there would some 2-3 customers in the same page.
There is no relation between these customers , they are same as the other customers, no difference at all.then i am not able to figure out the reason why it is behaving so odd.
Thanks
RameshRamesh,
right now there really is no way to solve what you are looking for. There partial solutions, but you will not be able to force a page break in a dynamic report.
Here is what I have faced, and what I have come up with so far:
I have a series of reports that have the same column heading, but spread over 5 pages in a fixed structure. I need to be able to re-use the header and the general report design with 6 reports. Here is my solution:
1. Create an outline of the report. I did all the formatting by creating a report section for each page. You can force page breaks between the pages. Upgrade to patch 1502 (came out last week) and you will see some new functionality (such as fit to page, page numbers, etc).
2. Insert all you page breaks and do all the formatting.
3. Insert an infoprovider. Once in, you can just drag and drop the key figure cells into your formatted report.
4. Create additional modification for formatting as needed.
This fixes my problem (for now), but I had to do a lot of work to come up with this. Also, the latest patch (1501 and 1502) has created an issue for me - there is a null exception when I try to use a variable or a filter value in the report body - I can't save the report. I have an OSS message out, but our BASIS guys are going to be taking the lead on troubleshooting this.
The reason that you are seeing some customers on the new pages is probably because of "how the cookie falls" - they just fit that way.
I am trying to be positive and overcome the limitations that are in place right now. If my technical issue is solved, I would recommend upgrading to the new patch (1403 is the latest stable one in my opinion)
good luck
Pavel -
BW Report Designer - Group level changes
Dear all,
we intent to use BW Report Designer and want to insert page breaks between group level changes
so that we get one page per item of a group (as it is possible in Crystal reports).
Example:
Sales organization is listed in column 1 of our query - we need one page per item -
page 1 - Sales organization 100
page 2 - Sales organization 200
Concerning to the online documentation it should be possible, but we can't find this functionality
within the BW Report designer.
Could anybody assist us?
Thanks
HagenCheck the below post and you'll have your solution! Hope this helps.
Page Breaks in Report Designer -
How to convert Report Model to Report Designer DataSet
To all,
I have a two part question. One is I am experiencing the error at the end of this question when migrating SQL Server 2005 SSRS Native Reports, the report uses a Report Model, to SQL Server 2008 SSRS Native. I bring the Report and Report Model to SQL Server 2008 SSRS and get the error at the end of the question below. Background and the 2nd question are below.
I have a bunch of Report Builder based Reports. I need to convert them to VS BIDS based Report Designer Reports with Shared Datasources and MDX based DataSets.
How can I grab the MDX from the Report Builder Report Model so I can put it into the Report Designer DataSet Query Definition?
What is the easiest way to make this migration between these Report development environments.
I am able to open the Report.RDL file in VS BIDS and can see the entire UI layer. The DataSet I see here is the one that is related to the error at the end of the question. The RD/DataSet holds:
<SemanticQuery xmlns="http://schemas.microsoft.com/sqlserver/2004/10/semanticmodeling" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:rb="http://schemas.microsoft.com/sqlserver/2004/11/reportbuilder" xmlns:qd="http://schemas.microsoft.com/sqlserver/2004/11/semanticquerydesign">
<Hierarchies>
<Hierarchy>
<BaseEntity>
<!--Fact Messages-->
<EntityID xmlns:np="http://schemas.microsoft.com/sqlserver/2004/10/semanticmodeling/udmmodeling">np:Entity_MeasureGroup_DW_Text_Fact_Messages</EntityID>
</BaseEntity>
<Groupings>
<Grouping Name="Date">
<Expression Name="Date">
<Path>
<RolePathItem>
<!--Dim Date-->
<RoleID xmlns:np="http://schemas.microsoft.com/sqlserver/2004/10/semanticmodeling/udmmodeling">np:Role_MeasureGroupDimension_Entity_MeasureGroup_DW_Text_Fact_Messages_Entity_Dimension_Dim_Date_Entity_Dimension_DW_Text_Dim_Date</RoleID>
</RolePathItem>
</Path>
<AttributeRef>
<!--Full Date-->
<AttributeID xmlns:np="http://schemas.microsoft.com/sqlserver/2004/10/semanticmodeling/udmmodeling">np:Attribute_Hierarchy_Dim_Date.Full_Date</AttributeID>
</AttributeRef>
</Expression>
</Grouping>
<Grouping Name="Hour">
<Expression Name="Hour">
<Path>
<RolePathItem>
<!--Dim Time-->
<RoleID xmlns:np="http://schemas.microsoft.com/sqlserver/2004/10/semanticmodeling/udmmodeling">np:Role_MeasureGroupDimension_Entity_MeasureGroup_DW_Text_Fact_Messages_Entity_Dimension_Dim_Time_Entity_Dimension_DW_Text_Dim_Time</RoleID>
</RolePathItem>
</Path>
<AttributeRef>
<!--Hour24-->
<AttributeID xmlns:np="http://schemas.microsoft.com/sqlserver/2004/10/semanticmodeling/udmmodeling">np:Attribute_Hierarchy_Dim_Time.Hour24</AttributeID>
</AttributeRef>
</Expression>
</Grouping>
<Grouping Name="Year">
<Expression Name="Year">
<Path>
<RolePathItem>
<!--Dim Date-->
<RoleID xmlns:np="http://schemas.microsoft.com/sqlserver/2004/10/semanticmodeling/udmmodeling">np:Role_MeasureGroupDimension_Entity_MeasureGroup_DW_Text_Fact_Messages_Entity_Dimension_Dim_Date_Entity_Dimension_DW_Text_Dim_Date</RoleID>
</RolePathItem>
</Path>
<AttributeRef>
<!--Year-->
<AttributeID xmlns:np="http://schemas.microsoft.com/sqlserver/2004/10/semanticmodeling/udmmodeling">np:Attribute_Hierarchy_Dim_Date.Year</AttributeID>
</AttributeRef>
</Expression>
</Grouping>
</Groupings>
<Filter>
<Expression Name="expr1">
<Function>
<FunctionName>And</FunctionName>
<Arguments>
<Expression>
<Function>
<FunctionName>And</FunctionName>
<Arguments>
<Expression>
<Function>
<FunctionName>GreaterThanOrEquals</FunctionName>
<Arguments>
<Expression>
<Path>
<RolePathItem>
<!--Dim Date-->
<RoleID xmlns:np="http://schemas.microsoft.com/sqlserver/2004/10/semanticmodeling/udmmodeling">np:Role_MeasureGroupDimension_Entity_MeasureGroup_DW_Text_Fact_Messages_Entity_Dimension_Dim_Date_Entity_Dimension_DW_Text_Dim_Date</RoleID>
</RolePathItem>
</Path>
<AttributeRef>
<!--Date-->
<AttributeID xmlns:np="http://schemas.microsoft.com/sqlserver/2004/10/semanticmodeling/udmmodeling">np:Attribute_Hierarchy_Dim_Date.Date</AttributeID>
</AttributeRef>
</Expression>
<Expression>
<Function>
<FunctionName>DateAdd</FunctionName>
<Arguments>
<Expression>
<Literal>
<DataType>String</DataType>
<Value>Day</Value>
</Literal>
</Expression>
<Expression>
<Function>
<FunctionName>Negate</FunctionName>
<Arguments>
<Expression>
<ParameterRef>
<ParameterName>Date in last (n) days</ParameterName>
</ParameterRef>
</Expression>
</Arguments>
</Function>
</Expression>
<Expression>
<Function>
<FunctionName>Today</FunctionName>
</Function>
</Expression>
</Arguments>
</Function>
</Expression>
</Arguments>
</Function>
</Expression>
<Expression>
<Function>
<FunctionName>LessThan</FunctionName>
<Arguments>
<Expression>
<Path>
<RolePathItem>
<!--Dim Date-->
<RoleID xmlns:np="http://schemas.microsoft.com/sqlserver/2004/10/semanticmodeling/udmmodeling">np:Role_MeasureGroupDimension_Entity_MeasureGroup_DW_Text_Fact_Messages_Entity_Dimension_Dim_Date_Entity_Dimension_DW_Text_Dim_Date</RoleID>
</RolePathItem>
</Path>
<AttributeRef>
<!--Date-->
<AttributeID xmlns:np="http://schemas.microsoft.com/sqlserver/2004/10/semanticmodeling/udmmodeling">np:Attribute_Hierarchy_Dim_Date.Date</AttributeID>
</AttributeRef>
</Expression>
<Expression>
<Function>
<FunctionName>Today</FunctionName>
</Function>
</Expression>
</Arguments>
</Function>
</Expression>
</Arguments>
</Function>
<CustomProperties>
<CustomProperty Name="qd:FilterCondition" />
</CustomProperties>
</Expression>
<Expression>
<Function>
<FunctionName>Equals</FunctionName>
<Arguments>
<Expression>
<Path>
<RolePathItem>
<!--Dim Volume-->
<RoleID xmlns:np="http://schemas.microsoft.com/sqlserver/2004/10/semanticmodeling/udmmodeling">np:Role_MeasureGroupDimension_Entity_MeasureGroup_DW_Text_Fact_Messages_Entity_Dimension_Dim_Volume_Entity_Dimension_DW_Text_Dim_Volume</RoleID>
</RolePathItem>
</Path>
<AttributeRef>
<!--Description-->
<AttributeID xmlns:np="http://schemas.microsoft.com/sqlserver/2004/10/semanticmodeling/udmmodeling">np:Attribute_Hierarchy_Dim_Volume.Description</AttributeID>
</AttributeRef>
</Expression>
<Expression>
<Literal>
<DataType>String</DataType>
<Value>Volume</Value>
</Literal>
</Expression>
</Arguments>
</Function>
<CustomProperties>
<CustomProperty Name="qd:FilterCondition" />
</CustomProperties>
</Expression>
</Arguments>
</Function>
<CustomProperties>
<CustomProperty Name="qd:Filter" />
<CustomProperty Name="qd:ContextEntityID">
<Value xsi:type="xsd:string">http://schemas.microsoft.com/sqlserver/2004/10/semanticmodeling/udmmodeling:Entity_MeasureGroup_DW_Text_Fact_Messages</Value>
</CustomProperty>
<CustomProperty Name="qd:AutoChangeBaseEntity" />
<CustomProperty Name="qd:Design">
<Value xsi:type="xsd:string">expr2</Value>
</CustomProperty>
</CustomProperties>
</Expression>
</Filter>
</Hierarchy>
</Hierarchies>
<MeasureGroups>
<MeasureGroup>
<BaseEntity>
<!--Fact Messages-->
<EntityID xmlns:np="http://schemas.microsoft.com/sqlserver/2004/10/semanticmodeling/udmmodeling">np:Entity_MeasureGroup_DW_Text_Fact_Messages</EntityID>
</BaseEntity>
<Measures>
<Expression Name="Volume">
<AttributeRef>
<!--Volume-->
<AttributeID xmlns:np="http://schemas.microsoft.com/sqlserver/2004/10/semanticmodeling/udmmodeling">np:Attribute_Measure_DW_Text_Volume</AttributeID>
</AttributeRef>
</Expression>
<Expression Name="Auto %">
<AttributeRef>
<!--Automated_Pct-->
<AttributeID xmlns:np="http://schemas.microsoft.com/sqlserver/2004/10/semanticmodeling/udmmodeling">np:Attribute_Measure_DW_Text_Automated_Pct</AttributeID>
</AttributeRef>
</Expression>
<Expression Name="Send Now %">
<AttributeRef>
<!--Send_Now_Pct-->
<AttributeID xmlns:np="http://schemas.microsoft.com/sqlserver/2004/10/semanticmodeling/udmmodeling">np:Attribute_Measure_DW_Text_Send_Now_Pct</AttributeID>
</AttributeRef>
</Expression>
<Expression Name="Use %">
<AttributeRef>
<!--Use_Pct-->
<AttributeID xmlns:np="http://schemas.microsoft.com/sqlserver/2004/10/semanticmodeling/udmmodeling">np:Attribute_Measure_DW_Text_Use_Pct</AttributeID>
</AttributeRef>
</Expression>
<Expression Name="Stock Ans %">
<AttributeRef>
<!--StockAns_Pct-->
<AttributeID xmlns:np="http://schemas.microsoft.com/sqlserver/2004/10/semanticmodeling/udmmodeling">np:Attribute_Measure_DW_Text_StockAns_Pct</AttributeID>
</AttributeRef>
</Expression>
<Expression Name="Charged">
<AttributeRef>
<!--Charged_Pct-->
<AttributeID xmlns:np="http://schemas.microsoft.com/sqlserver/2004/10/semanticmodeling/udmmodeling">np:Attribute_Measure_DW_Text_Charged_Pct</AttributeID>
</AttributeRef>
</Expression>
<Expression Name="Billed">
<AttributeRef>
<!--Billed_Pct-->
<AttributeID xmlns:np="http://schemas.microsoft.com/sqlserver/2004/10/semanticmodeling/udmmodeling">np:Attribute_Measure_DW_Text_Billed_Pct</AttributeID>
</AttributeRef>
</Expression>
<Expression Name="Avg TTA (s)">
<AttributeRef>
<!--Avg_TT_Answer-->
<AttributeID xmlns:np="http://schemas.microsoft.com/sqlserver/2004/10/semanticmodeling/udmmodeling">np:Attribute_Measure_DW_Text_Avg_TT_Answer</AttributeID>
</AttributeRef>
</Expression>
<Expression Name="Avg TTC (s)">
<AttributeRef>
<!--Avg_Time_To_Customer-->
<AttributeID xmlns:np="http://schemas.microsoft.com/sqlserver/2004/10/semanticmodeling/udmmodeling">np:Attribute_Measure_DW_Text_Avg_Time_To_Customer</AttributeID>
</AttributeRef>
</Expression>
</Measures>
<SubtotalSets>
<SubtotalSet>
<SubtotalGroupings>
<GroupingName>Year</GroupingName>
</SubtotalGroupings>
<SubtotalMeasures>
<MeasureName>Volume</MeasureName>
<MeasureName>Auto %</MeasureName>
<MeasureName>Send Now %</MeasureName>
<MeasureName>Use %</MeasureName>
<MeasureName>Stock Ans %</MeasureName>
<MeasureName>Charged</MeasureName>
<MeasureName>Billed</MeasureName>
<MeasureName>Avg TTA (s)</MeasureName>
<MeasureName>Avg TTC (s)</MeasureName>
</SubtotalMeasures>
</SubtotalSet>
<SubtotalSet>
<SubtotalGroupings>
<GroupingName>Date</GroupingName>
<GroupingName>Year</GroupingName>
</SubtotalGroupings>
<SubtotalMeasures>
<MeasureName>Volume</MeasureName>
<MeasureName>Auto %</MeasureName>
<MeasureName>Send Now %</MeasureName>
<MeasureName>Use %</MeasureName>
<MeasureName>Stock Ans %</MeasureName>
<MeasureName>Charged</MeasureName>
<MeasureName>Billed</MeasureName>
<MeasureName>Avg TTA (s)</MeasureName>
<MeasureName>Avg TTC (s)</MeasureName>
</SubtotalMeasures>
</SubtotalSet>
</SubtotalSets>
</MeasureGroup>
</MeasureGroups>
<Parameters>
<Parameter Name="Date in last (n) days">
<DataType>Integer</DataType>
<Expression>
<Literal>
<DataType>Integer</DataType>
<Value>14</Value>
</Literal>
</Expression>
</Parameter>
</Parameters>
<CustomProperties>
<CustomProperty Name="qd:PerspectiveID">
<Value xsi:type="xsd:string">http://schemas.microsoft.com/sqlserver/2004/10/semanticmodeling/udmmodeling:Perspective_Cube_DW_Text</Value>
</CustomProperty>
</CustomProperties>
</SemanticQuery>
I have created a Shared Datasource that points the the correct Analysis Services cubes that the original Report Model pointed at.
However, I get this error when running the report:
An error occurred during client rendering.
An error has occurred during report processing.
Semantic query compilation failed: e EmptySemanticQuery The SemanticQuery does not contain any Groupings or MeasureGroups. SemanticQuery must contain at least one of these elements. (SemanticQuery '').Actually the error above is from running the report on SSRS 2008 Native. Does anyone know why I get this error and how it may be resolved.
Then I try to bring the report into BIDS RD and create a SDS and DataSet. The Semantic Query above is from the RD DataSet Query window.
I get the following error when running the report in BIDS RD:
An error occured during local processing.
An error has occured during report processing.
Query execution failed for dataset 'dataSet'.
The SemanticQuery element at line 7, column 351 (namespace http://schema.microsoft.com/sqlserver/2004/10semanticmodeling) cannot appear under Envelope/Body/Execute/Command.
So I have two errors with two scenarios. I'd like to know how to resolve one of them.
I'd also like to know how to get the MDX from the RB/RM report so I can put it into the VS BIDS Version and get that to work properly.
Thanks,
Eric -
Latest Front-End Support pack - Report Designer
Hi,
We are having some formating related issues in Report Designer in some of the Finance reports. I believe this is because of missing latest Support Packs or Patches front end.... for example, in report designer we unable to see the settings in the property window (on left) to display column headings on each page.
We are on front-end pack: BI Add-on 7.10, Support Pack 5, Revision 529.
Back-end: Support Pack 16.
Is this the latest one (for Front-end)?
If not, can you please let me know what is the latest support pack/patches available?
Thanks.
Samay
Edited by: Samay Mehta on Jun 11, 2008 10:28 PMservice.sap.com/swdc
Support packages and patches>Entry by application group>
Support Packages and Patches"> SAP Frontend Components"> SAP GUI FOR WINDOWS" >SAP GUI FOR WINDOWS 6.40>win32
also check
Using the BI 7.x Add-On for SAP GUI 7.10 - Requirements
hope this helps.
In general, the frontend patches are released at the same time as backend patches...
Therefore,usually
FEP9 is released with SPS9.
FEP10 is released with SPS10.
FEP11 is released with SPS11
FEP16 is released with SPS16
Hope it Helps
Chetan
@CP..
Maybe you are looking for
-
How to re-install Snow Leopard on Macbook Pro i7?
When using a retail copy of Snow Leopard DVD I get "Unknown CPU" error. I tried to install it by moving the HDD onto another (older) macbook. But then when I move the HDD back, I get the "Unknown CPU" error again. I do not have the original DVD that
-
Subtype creating two indexes for Profile
Hi all, For CSC 9.2.. We have subtypes for User. Its creating two indexes for one profile. Thanks, Sameer
-
Hi Experts, What all the important information we have to gather from client to do the IDOC to File(SML) scenario? Thanks & Regards Sara
-
how to hide pdf file top toolbar,navigation toolbar and floating toolbar all three together in web browser control using vb.net
-
Outlook 2013 and Outlook 365 on Windows 7: Can't set up Verizon email
I am running WINDOWS 7 and OUTLOOK 2013. I have Office 365, too. I have followed every screen shot scrupulously and I have had Verizon take over my computer three times, with no success over the past three months since I purchased a new Dell Latitud