Report designer - query alignment

Hi all,
In report designer I have 2 queries with a top 10 condition on a characteristic in the rows and 1 key figure in the column. The report designer shows these reports as dynamic sections.
Therefore I cannot place them horizontally next to each other, for layout purposes.
Does anyone know how I can achieve this?
thanks

not possible

Similar Messages

Embedding a report designer query into a template - errors out

In a template i want to include the report designer query, with the web item type - report, when i drag the report item into the template and try to edit it, it takes me to the report designer, there I'm able to open my report designer query - then when i go to - menu - transfer to web apllication designer - it takes me back to WAD but errors out saying it encountered a problem. Did anyone come across this issue? And how did you overcoem this? Any help or pointer would be appreciated and rewarded.
Please find the error log below:
3:45:25 PM.686 ########## END ##########
3:45:25 PM.686 ########## --> com.sap.bi.et.wad.BexWebApplicationDesigner.Launch.Main ##########
3:45:25 PM.686: For Info: WAD Start. Revision: 7005.5.1100.277
GetSystemInformation
SUNI Const: 1.602272
CommunicationFactory.GetSystemInformation (Setting Conn 1)): 1.602272
CommunicationFactory.GetSystemInformation (Setting Conn 2)): 7.110082
CommunicationFactory.GetSystemInformation (Setting init Propties)): 7.110082
CommunicationFactory.GetSystemInformation (SUNI.FUNCTION_EXISTS)): 7.710934
RSR_XLS_RFCtrc: 8.51207
CommunicationFactory.GetSystemInformation (RSR_XLS_NET_INTERFACE)): 18.02556
CommunicationFactory.GetSystemInformation (XML Stuff)): 20.0284
CommunicationFactory.GetSystemInformation (Prop Stuff)): 20.0284
CommunicationFactory.GetSystemInformation (Version)): 20.0284
CommunicationFactory.ObtainSystemInformationandCheckVersion (GetSysInfo)): 20.128542
BExTextPool.New1: 0.300426
BExTextPool.New2: 0.400568
BExTextPool.New3: 0.400568
BExTextPool.New2: 0.400568
CommunicationFactory.ObtainSystemInformationandCheckVersion (CheckAfterLogin)): 1.00142
CommunicationFactory.LogOnUsingComConnection (ObtainSystemInfo)): 21.129962
CommunicationFactory.LogOnUsingComConnection (MainConnectionChangedEvent)): 0
CommunicationFactory.LogOn: 21.730814
3:45:41 PM.458: Connected. System: BID
<?xml version="1.0" encoding="utf-16"?>
<I_T_SEARCH_ATTR xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" />
<?xml version="1.0" encoding="utf-16"?>
<I_T_SEARCH_ATTR xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" />
RSR_XLS_RFCtrc: 0.700994
BExThemes.LoadFromBackend: 2.50355
BExThemes.LoadFromBackend: 0
BExThemes.LoadFromBackend: 0
Vert
BExThemes.LoadFromBackend: 0
<?xml version="1.0" encoding="utf-16"?>
<I_T_SEARCH_ATTR xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" />
BExThemes.LoadFromBackend: 0
Vert
BExThemes.LoadFromBackend: 0
3:47:41 PM.198 ########## END com.sap.bi.et.wad.BexWebApplicationDesigner.Launch.Main ##########
3:47:41 PM.198 ########## --> com.sap.bi.et.wad.RDHost.WADRDHostFactory.MaintainItem ##########
-EXCEPTION-START- 3:47:41 PM.198: External exception in Report Designer (execution) ---
Exception Message: Specified cast is not valid.
Exception    at com.sap.bi.et.ReportDesigner.RDbReportDesigner.getCookies()
   at com.sap.bi.et.ReportDesigner.RDbReportDesigner.RunFromWAD()
   at com.sap.bi.et.wad.RDHost.WADRDHostFactory.MaintainItem(XmlElement iItemTagNode, XmlElement iLibItemTagNode, IWADHostServicesProvider iServicesProvider, Boolean iIsLibItem)
Full Stack:
     at com.sap.bi.et.wad.Debug.WriteTraceToFile(Level, String, Exception)
     at com.sap.bi.et.wad.Trace.Exception(Exception, String)
     at com.sap.bi.et.wad.RDHost.WADRDHostFactory.MaintainItem(XmlElement, XmlElement, IWADHostServicesProvider, Boolean)
     at com.sap.bi.et.wad.rdcontrolhost.WADHostFactory.MaintainItem(XmlElement, XmlElement, IWADHostServicesProvider, Boolean)
     at com.sap.bi.et.wad.wiz.WADsF4GUIServices.CallCustomItemDialog(XmlElement, Form)
     at com.sap.bi.et.wad.man.WADfrmMainWindow.mnuCTXTEditTagCustom_Click(Object, EventArgs)
     at System.Windows.Forms.MenuItem.OnClick(EventArgs)
     at System.Windows.Forms.MenuItemData.Execute()
     at System.Windows.Forms.Command.Invoke()
     at System.Windows.Forms.Control.WmCommand(Message&)
     at System.Windows.Forms.Control.WndProc(Message&)
     at System.Windows.Forms.ScrollableControl.WndProc(Message&)
     at System.Windows.Forms.ContainerControl.WndProc(Message&)
     at System.Windows.Forms.Form.WndProc(Message&)
     at System.Windows.Forms.ControlNativeWindow.OnMessage(Message&)
     at System.Windows.Forms.ControlNativeWindow.WndProc(Message&)
     at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
     at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG&)
     at System.Windows.Forms.ComponentManager.System.Windows.Forms.UnsafeNativeMethods+IMsoComponentManager.FPushMessageLoop(Int32, Int32, Int32)
     at System.Windows.Forms.ThreadContext.RunMessageLoopInner(Int32, ApplicationContext)
     at System.Windows.Forms.ThreadContext.RunMessageLoop(Int32, ApplicationContext)
     at System.Windows.Forms.Application.Run(Form)
     at com.sap.bi.et.wad.BexWebApplicationDesigner.Launch.Main()
-EXCEPTION-END----

Hi Voodi,
I have the same problem too. Worked fine in SP 9 . Now we are in SP11 with FEP also in SP11 revision 277.Did you resolve the issue if so how?
Thanks,
Karthik

Report designer Query Transport issue!

Hello ALL,
Iu2019ve created a formatted report in Report designer the basis of which is a query developed in Query designer. Now the issue is Iu2019ve captured the query developed in Query designer by going to RSA1Transport connectionQuery Elements, but Iu2019m unable to capture the report designer query i.e when I try to search with this RD query name it says query does not exit.
Can someone please help, how I can transport this Query developed by Query designer.
Regards
Madhavi

Hi,
let me know the solution?
as i know , need to save and activate? and refresh in RSA1. you can find out your object.
regards.
Ram

Is there any transaction code for Report Designer,Query Designer and WAD

HI Gurus,
please tell me s there any transaction code for
1 Report Designer
2 Query Designer
3 WAD
Thanks in advance
Prashant

Hi Prashant,
We don't have any Transaction Codes for these.
Since these are installed along with the SAPLOGON BI components, it cannot be called using a standard transaction.
You have to use only .
Goto Start -> Programs -> Business Explorer -> Web Application Designer/Report Designer/Query Designer.
Hope it helps.
Reward with points if helpful.
Regards
Hemant Khemani
Edited by: Hemant Khemani on May 16, 2008 5:39 PM

Report Designer - Query with variable

Hi!
When testing the report designer, we have found an issue - its not possible to embedding queries with variables.
We have found note https://websmp107.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=012006153200000232982006
that suggest a solution to the issue.
My question is simply, does anyone know if this is a temporary fix, or is this a constraint that is not planned to be fixed by SAP? The note is a bit ambiguous.
BR
bjørn

Hello,
Queries with variables are still in restrictions for Report Designer.
You can use this work-arond creating Query View and fill up the variables. This allows you to define a Report in RD. Then, use Web Appication Designer to include your Report into Web Application and replace the Query View with your initial Query.
For the integration do following:
1. Create new Web Template in WAD
2. Drag-and-drop Web Item "Report"
3. Go to Property Window in WAD and search for "REPORT" (description Report Design) parameter in Web Items Parameters
4. Use the button on the right side of the parameter to open Report Designer and choose your Report in it.
5. You should see that new Data Provider was created in WAD -> Open it and set it to your initial Query.
5. Save you Web Template and execute in the browser.
Regards, Karol
Development BI

MTD/YTD reporting design, query designer

Hi BI folks,
I have a requirement to build queries through BEx query designer that show MTD and YTD figures. I also have multiple versions/value type built into the RKFs already. I am wondering if there is a way to display YTD/MTD figures, without having to physically restrict them into the RKFs??, (i.e. I would like to have that time restriction sitting on top of the structure as a characteristic).
I am trying to create more flexibility for the end-user, rather that having a huge amount of selections in the structure representing a particular version and time period.
Is there some sort of hierarchy or variable definition that anyone can suggest where I can solve this need?
Thanks.
- BJ

BJ,
this depends on the environment that you are using, but it is fairly simple to do for MTD and YTD.
as there are multiple variables available to be used for this, I consistently use two in the restriction (but you can play around and see what fits your needs the most). For each structure, you should restrict on the following:
MTD:
Period Characteristic - Restrict to variable 0P_PER3
Fiscal Year Characteristic - Restrict to variable 0P_FYEAR
QTD:
Period Characteristic - Restrict to Value range from period 00 to variable 0P_PER3
Fiscal Year Characteristic - Restrict to variable 0P_FYEAR
The reason you should have the Fiscal Year there is that you can use the text variable to set the column headers.
Be careful that you use the right KF for this. You need the periodic activity for the KF. The reason Period 00 is included as that is where the balance from the prior year is carried over, so if you want to have the YTD values for the Balance Sheet, you would want to include that. This scenario is the only option in BCS, and it doesn't have the Cumulative values.
you can also use the cumulative values, but that depends on how the KF's are set up
Pavel

Crystal report design query

Hello,
I am using Crystal reports 10 to design a report using an SQL database source.
There are 2 tables causing problems in that once fields from both of them are added to the detail section, the data is duplicated. The reason for this is table2 has a field (rulename) which can have multiple outcomes such as the basic example below:
table1.id,table2.rulename,table2.decision
1,postcodecheck,accept
1,secuitycheck,notchecked
1,creditcheck,notchecked
2,postcodecheck,accept
2,secuitycheck,accept
3,creditcheck,accept
3,postcodecheck,accept
3,secuitycheck,decline
3,creditcheck,notchecked
If I group the report by table1.ID it removes the duplicated records but only displays one of the 'rulename', usually accepts. A record sort of this field either retain the same result or replaces it with any table2.decision outcome of 'notchecked'. A more lengthy task would be to create formula fields for each rulename but having quite a few of this means its a very manual job.
Is there a better way to do this? I have not used the select expert because I want to display all decisions (table2.decisions).
Also if I create a crosstab report, each record is counted by the number of rulenames per ID, again duplicating each record (table1.id)
Thanks,WA

Hi Wasim,
Just try to check whether u have used proper link or not.
Database Expert->Link.
Regards,
Misra P.

BI 7.0: Report Designer / WAD Front-End Problems

Hi, We are on SAP Netweaver, BI 7.0 SP05, Stack01.
I have installed New SAP Front-End GUI Components,I dont have any problems executing queries in Web or BEx using Business Explorer 3.X.
I'm getting following errors when i try to execute with new version of Business Explorer.
1) Report Designer: Query XML is empty (BICS), please check query and portal setup.
this query works fine in BEx with New version as well.
2)Web Application Designer: "E002: Error while executing service RRXWS_WEBPUB_CALL_SERVICE:V for object 1()".
I couldnt execute simple web template in browser, when i click execute in browser, it open my local windows SAP directory.
Is there any setting or configuration files i should change?
i searched in OSS notes for these kind of errors, but i couldnt not find any
please let me know as its urgent.
thanks in advance..
Deepak Kunavarapu

Hi,
we're running NW2004s, BI 7.0 SP06.
I'm now testing the new Frontend-Tools and started with the Query Designer. Installed Patch 2, Revision 227. I created an new query and saved it. So far so good. After executing i get this error message:
iView not found: pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bex.
Exception id: 11:02_16/02/06_0017_46228450
See the details for the exception ID in the log file
Do I need the integrate an platform_add_on? Does someone get the same errors?
Thanks in adavance.
Benjamin Herrmann

0ADHOC error while executing the query from Report Designer

Hi All,
When I am executing The Query from Report Designer, am getting the below error.
Please help me in this regard.
The initial exception that caused the request to fail was:
The Web template "0ADHOC" does not exist in the master system
com.sap.ip.bi.base.exception.BIBaseRuntimeException: The Web template "0ADHOC" does not exist in the master system
at com.sap.ip.bi.webapplications.runtime.service.template.impl.TemplateService.getTemplateContent(TemplateService.java:57)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.service.template.PortalTemplateAccessService.getTemplateContent(PortalTemplateAccessService.java:82)
at com.sap.ip.bi.webapplications.runtime.preprocessor.Preprocessor.parseTemplate(Preprocessor.java:163)
at com.sap.ip.bi.webapplications.runtime.xml.XmlTemplateAssembler.doInit(XmlTemplateAssembler.java:79)
at com.sap.ip.bi.webapplications.runtime.template.TemplateAssembler.init(TemplateAssembler.java:133)
Thanks,
KVR

Hi,
The web template 0ADHOC is usually the standard web template for 3.x queries. The Report Designer executes the reports in java web, thus tries to find the template 0ADHOC in the 7.0 templates and does not find it. Check whether you have maintained the standard web template 0ADHOC for 7.0 reports also:
Transaktion SPRO -> SAP Reference Image -> SAP NetWeaver -> Business Intelligence -> Settings for Reporting and Analysis -> Bex Web -> Set Standard Web Templates
Best regards,
Janine

Error at report designer while opening the query

Hi
in report designer i am trying to open query
i am getting error like
error while loading query meta data
check the query and portal settings
i am getting this error only this report only
Diagnosis
An error occurred in the BI components on the SAP J2EE Engine.
System Response
Procedure
Contact your system administrator to have the error analyzed in detail.
Procedure for System Administration
Start the Visual Administrator, log on to the SAP J2EE Engine and choose "<J2EE_SID>" ->"Server" -> "Services" -> "Log Viewer".
The file "defaultTrace.trc" includes detailed information about the error that occurred. In Windows, you can find this file in the Log Viewer under "Cluster <computer name>" -> "Server <server number>" -> "<drive>:\usr\sap\<SID>\JC<INSTANCE>\j2ee\cluster\server<NUMBER>\log". ". In Unix, the file is located under "/usr/sap/<SID>/JC<INSTANCE>/j2ee/cluster/server<NUMBER>/log".
If the file does not include enough detail about the error, you can increase the log level to obtain more information. To do this, choose "<J2EE_SID>" -> "Server" -> "Services" -> "Log Configurator". On the "Locations" tab page, choose "com" -> "sap" -> "ip" -> "bi" -> "webapplications". Using the selection list on the right side of the screen, you can increase the log level, whereby "DEBUG" represents the log level with the most information. You can save your settings by choosing the "Save" icon. The change to the log level is active immediately. Once you have successfully analyzed the error, you should set the log level back to its default value using the appropriate pushbutton; continuous writing to the log file negatively affects the overall performance of the system.

Hi Suneel,
If you are using any JAVA based applications or objects in the Report designer this error is thrown.
It's better to install Java engine to correct this error.
You must contact Basis people in order to solve this issue.
With Regards,
Ravi Kanth

Error while executing report in query designer

Dear Folks,
I am geting following error while executing report in query designer.
Error:500 E
an exception raised because of 0analysis pattern.
Hence,i am unable to execute any report.
Need help.
Thanks

Hi Kitu G,
I think this is something to do with the bex web 0ANALYSIS* objects not being installed in your BW system.
I would try and do the following:
- Goto RSA1 > BI Content > BEx Web Template (BTMP)
- Then double-click on Select Object.
- Highlight all objects that start with 0ANALYSIS_PATTERN
- Click on Transfer Selections, and then Install.
If you can't do the above in prd, do it in DEV, then transport the objects to prd.
After all this, try re-running your queries.
Any questions/clarification just let me know
Cheers.
Darwin

Combine two reports in query designer using key figure with sap exit

Hi experts,
i want to combine two reports in query designer using key figure with sap exit
in the report 1 key figure calculation based on the open on key date(0P_DATE_OPEN)
to calculate due and not due in two columns
in report 2 key figure calculate in the time zones using given in variable Grid Width (0DPM_BV0) like due in 1 to 30 days, 31 to 60 days...the due amount based on the open on key date(0P_DATE_OPEN)
to calculate in 1-30, 31-60, 61-90, 91-120, 121-150 and >150 days in 6 columns
now i have requirement like this
not due, 1-30, 31-60, >60, due,1-30, 31-60, >60 in 8 columns
or
not due, due, 1-30, 31-60, 61-90, 91-120, 121-150 and >150 in 8 col
thank you

Hi Dirk,
you perhaps know my requirement,
for the management to make used in one report,
we have in reporting finacials Ehp3.
Vendor Due Date Analysis - which show due, not due
Vendor Overdue Analysis - show only due and analysis in time grid frame
i want to combine in one report that show NOT DUE, DUE, DUE time frames in grid.
krish...

How to add different query results in Report designer

Hi,
I am creating a report based on 3 queries. At the end i need to show total of 3 query results.
How can i add results of queries in report designer??
thanks in advance

Hi Siva,
As u said that u want to show the results of the queries through report designer but i think it is used for formatted reports .
If u want to see tha results of diffrent query then u can use workbook .
In workbook u can also analyse reports easily by applying slice and dice techniques .
from different queries result set will be displayed on workbook with formatting and good look and feel.
regards,
Supriya

Is it possible to set a "query in change mode" with the Report Designer 7.x

Hi,
I have a query set in "change mode" with an index set as "data can be changed using user entries or planning funcionts".
If I use this query as a "Data Provider" in the Report Designer, the result is still in "change mode" or a result of the Report Designer is only a static image?
Thank's,
Valentina.

Hi Deepu,
I had suspected this...
Thank you very much!
Regards,
Valentina.

Query View not available as DataProvider in Report Designer

Hi experts,
I am unable to find any query views when I tried to insert DataProvider in Report Designer. All that is available in InfoAreas view is only queries.
When I tried to restrict type to only Query View, they are only visible in History view and not others (e.g. Find and InfoAreas)
Is this the same case with everyone and why is that so?
Thanks!

Anyone who had experienced this?

Report designer - query alignment

Similar Messages

Maybe you are looking for